prompt "Target select"
optional
-config TARGET_MPC8308_P1M
- bool "Support mpc8308_p1m"
-
-config TARGET_SBC8349
- bool "Support sbc8349"
-
-config TARGET_VE8313
- bool "Support ve8313"
-
-config TARGET_VME8349
- bool "Support vme8349"
-
-config TARGET_MPC8308RDB
- bool "Support MPC8308RDB"
- select SYS_FSL_ERRATUM_ESDHC111
-
-config TARGET_MPC8313ERDB
- bool "Support MPC8313ERDB"
- select SUPPORT_SPL
- select BOARD_EARLY_INIT_F
-
config TARGET_MPC8315ERDB
bool "Support MPC8315ERDB"
+ select ARCH_MPC8315
select BOARD_EARLY_INIT_F
config TARGET_MPC8323ERDB
bool "Support MPC8323ERDB"
+ select ARCH_MPC832X
config TARGET_MPC832XEMDS
bool "Support MPC832XEMDS"
+ select ARCH_MPC832X
select BOARD_EARLY_INIT_F
config TARGET_MPC8349EMDS
bool "Support MPC8349EMDS"
+ select ARCH_MPC8349
+ select BOARD_EARLY_INIT_F
select SYS_FSL_DDR
- select SYS_FSL_HAS_DDR2
select SYS_FSL_DDR_BE
- select BOARD_EARLY_INIT_F
-
-config TARGET_MPC8349ITX
- bool "Support MPC8349ITX"
- imply CMD_IRQ
+ select SYS_FSL_HAS_DDR2
-config TARGET_MPC837XEMDS
- bool "Support MPC837XEMDS"
+config TARGET_MPC8349EMDS_SDRAM
+ bool "Support MPC8349EMDS_SDRAM"
+ select ARCH_MPC8349
select BOARD_EARLY_INIT_F
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_BE
+ select SYS_FSL_HAS_DDR2
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
+ select ARCH_MPC837X
select BOARD_EARLY_INIT_F
config TARGET_IDS8313
bool "Support ids8313"
+ select ARCH_MPC8313
select DM
+ imply CMD_DM
+
+config TARGET_KMETER1
+ bool "Support kmeter1"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
-config TARGET_KM8360
- bool "Support km8360"
- imply CMD_CRAMFS
- imply CMD_DIAG
- imply FS_CRAMFS
+config TARGET_KMCOGE5NE
+ bool "Support kmcoge5ne"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
-config TARGET_SUVD3
- bool "Support suvd3"
- imply CMD_CRAMFS
- imply FS_CRAMFS
+config TARGET_KMTEGR1
+ bool "Support kmtegr1"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
config TARGET_TUXX1
bool "Support tuxx1"
- imply CMD_CRAMFS
- imply FS_CRAMFS
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
+
+config TARGET_KMSUPX5
+ bool "Support kmsupx5"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
+
+config TARGET_TUGE1
+ bool "Support tuge1"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
-config TARGET_TQM834X
- bool "Support TQM834x"
+config TARGET_KMOPTI2
+ bool "Support kmopti2"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
-config TARGET_HRCON
- bool "Support hrcon"
+config TARGET_KMTEPR2
+ bool "Support kmtepr2"
+ select VENDOR_KM
+ select KM_ENABLE_FULL_DM_DTS_SUPPORT
+
+config TARGET_GAZERBEAM
+ bool "Support gazerbeam"
+ select ARCH_MPC8308
select SYS_FSL_ERRATUM_ESDHC111
+ imply ENV_IS_IN_FLASH
+ help
+ The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH
+ Systementwicklung based on the NXP MPC8308 SoC for usage in KVM
+ appliances.
+
+ Features include:
+ * Two gigabit ethernet ports
+ * Multiple USB ports (depending on variant)
+ * Several gigabit ethernet or optical fiber ports (depending on
+ variant)
+ * Several display port inputs and outputs, and supporting redrivers
+ (depending on variant)
+ * Several FPGAs with custom logic (depending on variant)
+
+endchoice
+
+config MPC83XX_QUICC_ENGINE
+ bool
+
+# TODO: Imply MPC83xx PCI driver
+config MPC83XX_PCI_SUPPORT
+ bool
+
+# TODO: Imply TSEC driver
+config MPC83XX_TSEC1_SUPPORT
+ bool
+
+config MPC83XX_TSEC2_SUPPORT
+ bool
+
+config MPC83XX_PCIE1_SUPPORT
+ bool
+
+config MPC83XX_PCIE2_SUPPORT
+ bool
-config TARGET_STRIDER
- bool "Support strider"
+config MPC83XX_SDHC_SUPPORT
+ bool
+
+config MPC83XX_SATA_SUPPORT
+ bool
+
+config MPC83XX_SECOND_I2C_SUPPORT
+ bool
+
+config MPC83XX_LDP_PIN
+ bool
+
+config ARCH_MPC830X
+ bool
+ select MPC83XX_SDHC_SUPPORT
+
+config ARCH_MPC8308
+ bool
+ select ARCH_MPC830X
+ select MPC83XX_TSEC1_SUPPORT
+ select MPC83XX_TSEC2_SUPPORT
+ select MPC83XX_PCIE1_SUPPORT
+ select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC8309
+ bool
+ select ARCH_MPC830X
+ select MPC83XX_QUICC_ENGINE
+ select MPC83XX_PCI_SUPPORT
+ select MPC83XX_SECOND_I2C_SUPPORT
select SYS_FSL_ERRATUM_ESDHC111
+ select FSL_ELBC
+
+config ARCH_MPC831X
+ bool
+ select MPC83XX_PCI_SUPPORT
+ select MPC83XX_TSEC1_SUPPORT
+ select MPC83XX_TSEC2_SUPPORT
+
+config ARCH_MPC8313
+ bool
+ select ARCH_MPC831X
+ select MPC83XX_SECOND_I2C_SUPPORT
+ select FSL_ELBC
+
+config ARCH_MPC8315
+ bool
+ select ARCH_MPC831X
+ select MPC83XX_PCIE1_SUPPORT
+ select MPC83XX_PCIE2_SUPPORT
+ select MPC83XX_SATA_SUPPORT
+ select FSL_ELBC
+
+config ARCH_MPC832X
+ bool
+ select MPC83XX_QUICC_ENGINE
+ select MPC83XX_PCI_SUPPORT
+
+config ARCH_MPC834X
+ bool
+
+config ARCH_MPC8349
+ bool
+ select ARCH_MPC834X
+ select MPC83XX_PCI_SUPPORT
+ select MPC83XX_TSEC1_SUPPORT
+ select MPC83XX_TSEC2_SUPPORT
+ select MPC83XX_LDP_PIN
+ select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC8360
+ bool
+ select MPC83XX_QUICC_ENGINE
+ select MPC83XX_PCI_SUPPORT
+ select MPC83XX_LDP_PIN
+ select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC837X
+ bool
+ select MPC83XX_PCI_SUPPORT
+ select MPC83XX_TSEC1_SUPPORT
+ select MPC83XX_TSEC2_SUPPORT
+ select MPC83XX_PCIE1_SUPPORT
+ select MPC83XX_PCIE2_SUPPORT
+ select MPC83XX_SDHC_SUPPORT
+ select MPC83XX_SATA_SUPPORT
+ select MPC83XX_LDP_PIN
+ select MPC83XX_SECOND_I2C_SUPPORT
+ select FSL_ELBC
+
+config SYS_IMMR
+ hex "Value for IMMR"
+ default 0xE0000000
+ help
+ Address for the Internal Memory-Mapped Registers (IMMR) window used
+ to configure the features of the SoC.
+
+source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/bats/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/hid/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"
+
+menu "Legacy options"
+
+if ARCH_MPC8349
+
+#TODO(mario.six@gdsys.cc): Remove when mpc83xx PCI has been converted to DM/DT
+choice
+ prompt "PMC slot configuration"
+
+config PCI_ALL_PCI1
+ bool "All PMC slots on PCI1"
+
+config PCI_ONE_PCI1
+ bool "First PMC1 on PCI1"
+
+config PCI_TWO_PCI1
+ bool "First two PMC1 on PCI1"
endchoice
-source "board/esd/vme8349/Kconfig"
-source "board/freescale/mpc8308rdb/Kconfig"
-source "board/freescale/mpc8313erdb/Kconfig"
+config PCI_64BIT
+ bool "PMC2 is 64bit"
+
+endif
+
+endmenu
+
+config FSL_ELBC
+ bool
+
source "board/freescale/mpc8315erdb/Kconfig"
source "board/freescale/mpc8323erdb/Kconfig"
source "board/freescale/mpc832xemds/Kconfig"
source "board/freescale/mpc8349emds/Kconfig"
-source "board/freescale/mpc8349itx/Kconfig"
-source "board/freescale/mpc837xemds/Kconfig"
source "board/freescale/mpc837xerdb/Kconfig"
source "board/ids/ids8313/Kconfig"
-source "board/keymile/km83xx/Kconfig"
-source "board/mpc8308_p1m/Kconfig"
-source "board/sbc8349/Kconfig"
-source "board/tqc/tqm834x/Kconfig"
-source "board/ve8313/Kconfig"
+source "board/keymile/Kconfig"
source "board/gdsys/mpc8308/Kconfig"
endmenu
projects / platform / kernel / u-boot.git / blobdiff