environment in one of the last sectors, leaving a gap
between U-Boot and the environment.
- - CFG_ENV_OFFSET:
+ - CONFIG_ENV_OFFSET:
Offset of environment data (variable area) to the
beginning of flash memory; for instance, with bottom boot
type flash chips the second sector can be used: the offset
for this sector is given here.
- CFG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
+ CONFIG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
- - CFG_ENV_ADDR:
+ - CONFIG_ENV_ADDR:
This is just another way to specify the start address of
the flash sector containing the environment (instead of
- CFG_ENV_OFFSET).
+ CONFIG_ENV_OFFSET).
- - CFG_ENV_SECT_SIZE:
+ - CONFIG_ENV_SECT_SIZE:
Size of the sector containing the environment.
In such a case you don't want to spend a whole sector for
the environment.
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_SIZE:
If you use this in combination with CONFIG_ENV_IS_IN_FLASH
- and CFG_ENV_SECT_SIZE, you can specify to use only a part
+ and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
of this flash sector for the environment. This saves
memory for the RAM copy of the environment.
wrong before the contents has been restored from a copy in
RAM, your target system will be dead.
- - CFG_ENV_ADDR_REDUND
- CFG_ENV_SIZE_REDUND
+ - CONFIG_ENV_ADDR_REDUND
+ CONFIG_ENV_SIZE_REDUND
These settings describe a second storage area used to hold
a redundant copy of the environment data, so that there is
(NVRAM, battery buffered SRAM) which you want to use for the
environment.
- - CFG_ENV_ADDR:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
These two #defines are used to determine the memory area you
want to use for environment. It is assumed that this memory
Use this if you have an EEPROM or similar serial access
device and a driver for it.
- - CFG_ENV_OFFSET:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the
environment area within the total memory of your EEPROM.
Define this if you have a DataFlash memory device which you
want to use for the environment.
- - CFG_ENV_OFFSET:
- - CFG_ENV_ADDR:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
These three #defines specify the offset and size of the
environment area within the total memory of your DataFlash placed
Define this if you have a NAND device which you want to use
for the environment.
- - CFG_ENV_OFFSET:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the environment
area within the first NAND device.
- - CFG_ENV_OFFSET_REDUND
+ - CONFIG_ENV_OFFSET_REDUND
- This setting describes a second storage area of CFG_ENV_SIZE
+ This setting describes a second storage area of CONFIG_ENV_SIZE
size used to hold a redundant copy of the environment data,
so that there is a valid backup copy in case there is a
power failure during a "saveenv" operation.
- Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
- to a block boundary, and CFG_ENV_SIZE must be a multiple of
+ Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned
+ to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
the NAND devices block size.
- CFG_SPI_INIT_OFFSET