Prepare v2023.10
[platform/kernel/u-boot.git] / include / configs / tb100.h
1 /*
2  * Copyright (C) 2011-2014 Pierrick Hascoet, Abilis Systems
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef _CONFIG_TB100_H_
8 #define _CONFIG_TB100_H_
9
10 #include <linux/sizes.h>
11
12 /*
13  *  CPU configuration
14  */
15 #define CONFIG_ARC700
16 #define CONFIG_ARC_MMU_VER              3
17 #define CONFIG_SYS_CACHELINE_SIZE       32
18 #define CONFIG_SYS_CLK_FREQ             500000000
19 #define CONFIG_SYS_TIMER_RATE           CONFIG_SYS_CLK_FREQ
20
21 /*
22  * Board configuration
23  */
24 #define CONFIG_SYS_GENERIC_BOARD
25 #define CONFIG_ARCH_EARLY_INIT_R
26
27 /*
28  * Memory configuration
29  */
30 #define CONFIG_SYS_TEXT_BASE            0x84000000
31 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
32
33 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
34 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
35 #define CONFIG_SYS_SDRAM_SIZE           SZ_128M
36
37 #define CONFIG_SYS_INIT_SP_ADDR         \
38         (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
39
40 #define CONFIG_SYS_MALLOC_LEN           SZ_128K
41 #define CONFIG_SYS_BOOTM_LEN            SZ_32M
42 #define CONFIG_SYS_LOAD_ADDR            0x82000000
43
44 #define CONFIG_SYS_NO_FLASH
45
46 /*
47  * UART configuration
48  */
49 #define CONFIG_CONS_INDEX               1
50 #define CONFIG_SYS_NS16550
51 #define CONFIG_SYS_NS16550_SERIAL
52 #define CONFIG_SYS_NS16550_REG_SIZE     -4
53 #define CONFIG_SYS_NS16550_CLK          166666666
54 #define CONFIG_SYS_NS16550_COM1         0xFF100000
55 #define CONFIG_SYS_NS16550_MEM32
56
57 #define CONFIG_BAUDRATE                 115200
58
59 /*
60  * Ethernet PHY configuration
61  */
62 #define CONFIG_PHYLIB
63 #define CONFIG_PHY_GIGE
64
65 /*
66  * Even though the board houses Realtek RTL8211E PHY
67  * corresponding PHY driver (drivers/net/phy/realtek.c) behaves unexpectedly.
68  * In particular "parse_status" reports link is down.
69  *
70  * Until Realtek PHY driver is fixed fall back to generic PHY driver
71  * which implements all required functionality and behaves much more stable.
72  *
73  * #define CONFIG_PHY_REALTEK
74  *
75  */
76
77 /*
78  * Ethernet configuration
79  */
80 #define CONFIG_DESIGNWARE_ETH
81 #define ETH0_BASE_ADDRESS               0xFE100000
82 #define ETH1_BASE_ADDRESS               0xFE110000
83
84 /*
85  * Command line configuration
86  */
87 #include <config_cmd_default.h>
88
89 #define CONFIG_CMD_DHCP
90 #define CONFIG_CMD_ELF
91 #define CONFIG_CMD_PING
92
93 #define CONFIG_OF_LIBFDT
94
95 #define CONFIG_AUTO_COMPLETE
96 #define CONFIG_SYS_MAXARGS              16
97
98 /*
99  * Environment settings
100  */
101 #define CONFIG_ENV_IS_NOWHERE
102 #define CONFIG_ENV_SIZE                 SZ_2K
103 #define CONFIG_ENV_OFFSET               0
104
105 /*
106  * Environment configuration
107  */
108 #define CONFIG_BOOTDELAY                3
109 #define CONFIG_BOOTFILE                 "uImage"
110 #define CONFIG_BOOTARGS                 "console=ttyS0,115200n8"
111 #define CONFIG_LOADADDR                 CONFIG_SYS_LOAD_ADDR
112
113 /*
114  * Console configuration
115  */
116 #define CONFIG_SYS_LONGHELP
117 #define CONFIG_SYS_PROMPT               "[tb100]:~# "
118 #define CONFIG_SYS_CBSIZE               256
119 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
120 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
121                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
122
123 #endif /* _CONFIG_TB100_H_ */