platform/kernel/linux-rpi.git
5 years agoLinux 4.19.3 v4.19.3
Greg Kroah-Hartman [Wed, 21 Nov 2018 08:19:29 +0000 (09:19 +0100)]
Linux 4.19.3

5 years agoRevert "ACPICA: AML interpreter: add region addresses in global list during initializ...
Greg Kroah-Hartman [Tue, 20 Nov 2018 09:08:18 +0000 (10:08 +0100)]
Revert "ACPICA: AML interpreter: add region addresses in global list during initialization"

This reverts commit 22083c028d0b3ee419232d25ce90367e5b25df8f which is
commit 4abb951b73ff0a8a979113ef185651aa3c8da19b upstream.

Jean writes:

This commit was tagged with:

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200011
Tested-by: Jean-Marc Lenoir
Cc: All applicable <stable@vger.kernel.org>
making it sound like it was fixing an actual bug. This is not the case.
The commit fixes a side issue discovered while investigating bug
#200011. It does NOT fix bug #200011 itself (as explicitly reported by
Jean-Marc at https://bugzilla.kernel.org/show_bug.cgi?id=200011#c65 ).

It does however cause regressions, despite what the commit message says. See:

https://bugzilla.kernel.org/show_bug.cgi?id=201721

and I expect more similar regressions, as ACPI resource conflicts are
very frequent.

This commit was not stable material to start with. It is intrusive,
presents a risk of side effects, and does not solve an actual bug that
is bothering users.

Reported-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean-Marc Lenoir <archlinux@jihemel.com>
Cc: Erik Schmauss <erik.schmauss@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoCONFIG_XEN_PV breaks xen_create_contiguous_region on ARM
Stefano Stabellini [Wed, 31 Oct 2018 23:11:49 +0000 (16:11 -0700)]
CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM

commit f9005571701920551bcf54a500973fb61f2e1eda upstream.

xen_create_contiguous_region has now only an implementation if
CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but
we do have an implementation of xen_create_contiguous_region which is
required for swiotlb-xen to work correctly (although it just sets
*dma_handle).

[backport: remove change to xen_remap_pfn]

Cc: <stable@vger.kernel.org> # 4.12
Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds")
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Jeff.Kubascik@dornerworks.com
CC: Jarvis.Roach@dornerworks.com
CC: Nathan.Studer@dornerworks.com
CC: vkuznets@redhat.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: julien.grall@arm.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Fix hpd handling for pins with two encoders
Ville Syrjälä [Mon, 12 Nov 2018 13:36:16 +0000 (15:36 +0200)]
drm/i915: Fix hpd handling for pins with two encoders

commit 44a7276b30c3c15f2b7790a5729640597fb6a1df upstream.

In my haste to remove irq_port[] I accidentally changed the
way we deal with hpd pins that are shared by multiple encoders
(DP and HDMI for pre-DDI platforms). Previously we would only
handle such pins via ->hpd_pulse(), but now we queue up the
hotplug work for the HDMI encoder directly. Worse yet, we now
count each hpd twice and this increment the hpd storm count
twice as fast. This can lead to spurious storms being detected.

Go back to the old way of doing things, ie. delegate to
->hpd_pulse() for any pin which has an encoder with that hook
implemented. I don't really like the idea of adding irq_port[]
back so let's loop through the encoders first to check if we
have an encoder with ->hpd_pulse() for the pin, and then go
through all the pins and decided on the correct course of action
based on the earlier findings.

I have occasionally toyed with the idea of unifying the pre-DDI
HDMI and DP encoders into a single encoder as well. Besides the
hotplug processing it would have the other benefit of preventing
userspace from trying to enable both encoders at the same time.
That is simply illegal as they share the same clock/data pins.
We have some testcases that will attempt that and thus fail on
many older machines. But for now let's stick to fixing just the
hotplug code.

Cc: stable@vger.kernel.org # 4.19+
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST
Lyude Paul [Tue, 6 Nov 2018 21:30:13 +0000 (16:30 -0500)]
drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST

commit 541ff7e96c13cd5d67f6021d233f8e1c3df49278 upstream.

Turns out that if you trigger an HPD storm on a system that has an MST
topology connected to it, you'll end up causing the kernel to eventually
hit a NULL deref:

[  332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec
[  332.340906] PGD 0 P4D 0
[  332.342750] Oops: 0000 [#1] SMP PTI
[  332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G           O      4.18.0-rc3short-hpd-storm+ #2
[  332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[  332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915]
[  332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915]
[  332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41
[  332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006
[  332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006
[  332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570
[  332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840
[  332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20
[  332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a
[  332.366615] FS:  0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000
[  332.368658] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0
[  332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  332.376798] Call Trace:
[  332.378809]  process_one_work+0x1a1/0x350
[  332.380806]  worker_thread+0x30/0x380
[  332.382777]  ? wq_update_unbound_numa+0x10/0x10
[  332.384772]  kthread+0x112/0x130
[  332.386740]  ? kthread_create_worker_on_cpu+0x70/0x70
[  332.388706]  ret_from_fork+0x35/0x40
[  332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915]
[  332.394963] CR2: 00000000000000ec

This appears to be due to the fact that with an MST topology, not all
intel_connector structs will have ->encoder set. So, fix this by
skipping connectors without encoders in
intel_hpd_irq_storm_reenable_work().

For those wondering, this bug was found on accident while simulating HPD
storms using a Chamelium connected to a ThinkPad T450s (Broadwell).

Changes since v1:
- Check intel_connector->mst_port instead of intel_connector->encoder

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com
(cherry picked from commit fee61deecb1d850bf34f682a6a452e5ee51b7572)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Fix possible race in intel_dp_add_mst_connector()
Lyude Paul [Tue, 6 Nov 2018 21:30:12 +0000 (16:30 -0500)]
drm/i915: Fix possible race in intel_dp_add_mst_connector()

commit 7c4512300cfa5a4dcc8c1c52ae61e3fa4bd11a39 upstream.

This hasn't caused any issues yet that I'm aware of, but as Ville
Syrjälä pointed out - we need to make sure that
intel_connector->mst_port is set before initializing MST connectors,
since in theory we could potentially check intel_connector->mst_port in
i915_hpd_poll_init_work() after registering the connector but before
having written it's value.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com
(cherry picked from commit 66a5ab1034be801630816d1fa6cfc30db1a2f0b0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/execlists: Force write serialisation into context image vs execution
Chris Wilson [Thu, 8 Nov 2018 08:17:38 +0000 (08:17 +0000)]
drm/i915/execlists: Force write serialisation into context image vs execution

commit 0a823e8fd4fd67726697854578f3584ee3a49b1d upstream.

Ensure that the writes into the context image are completed prior to the
register mmio to trigger execution. Although previously we were assured
by the SDM that all writes are flushed before an uncached memory
transaction (our mmio write to submit the context to HW for execution),
we have empirical evidence to believe that this is not actually the
case.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108315
References: https://bugs.freedesktop.org/show_bug.cgi?id=106887
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5
Chris Wilson [Mon, 5 Nov 2018 09:43:05 +0000 (09:43 +0000)]
drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5

commit fb5bbae9b1333d44023713946fdd28db0cd85751 upstream.

Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.

Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
(cherry picked from commit 55f99bf2a9c331838c981694bc872cd1ec4070b2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Mark pin flags as u64
Chris Wilson [Fri, 2 Nov 2018 16:12:09 +0000 (16:12 +0000)]
drm/i915: Mark pin flags as u64

commit 0014868b9c3c1dda1de6711cf58c3486fb422d07 upstream.

Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk
(cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Don't oops during modeset shutdown after lpe audio deinit
Ville Syrjälä [Mon, 5 Nov 2018 19:46:04 +0000 (21:46 +0200)]
drm/i915: Don't oops during modeset shutdown after lpe audio deinit

commit 6a8915d0f8cf323e1beb792a33095cf652db4056 upstream.

We deinit the lpe audio device before we call
drm_atomic_helper_shutdown(), which means the platform device
may already be gone when it comes time to shut down the crtc.
As we don't know when the last reference to the platform
device gets dropped by the audio driver we can't assume that
the device and its data are still around when turning off the
crtc. Mark the platform device as gone as soon as we do the
audio deinit.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Compare user's 64b GTT offset even on 32b
Chris Wilson [Thu, 25 Oct 2018 09:18:23 +0000 (10:18 +0100)]
drm/i915: Compare user's 64b GTT offset even on 32b

commit 085603287452fc96376ed4888bf29f8c095d2b40 upstream.

Beware mixing unsigned long constants and 64b values, as on 32b the
constant will be zero extended and discard the high 32b when used as
a mask!

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk
(cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Fix ilk+ watermarks when disabling pipes
Ville Syrjälä [Thu, 25 Oct 2018 13:05:36 +0000 (16:05 +0300)]
drm/i915: Fix ilk+ watermarks when disabling pipes

commit df5e31c204b34e8d9e5ec33f5b28e960c4f25e14 upstream.

We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).

This seems to have been broken by commit b6b178a77210 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.

Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.

Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Fix error handling for the NV12 fb dimensions check
Ville Syrjälä [Mon, 29 Oct 2018 14:00:31 +0000 (16:00 +0200)]
drm/i915: Fix error handling for the NV12 fb dimensions check

commit f42f343887016330b321dd40eebc68c7292e4f1b upstream.

Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Mark up GTT sizes as u64
Chris Wilson [Thu, 25 Oct 2018 09:18:22 +0000 (10:18 +0100)]
drm/i915: Mark up GTT sizes as u64

commit c58281056a8b26d5d9dc15c19859a7880835ef44 upstream.

Since we use a 64b virtual GTT irrespective of the system, we want to
ensure that the GTT computations remains 64b even on 32b systems,
including treatment of huge virtual pages.

No code generation changes on 64b:

Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk
(cherry picked from commit 9125963a9494253fa5a29cc1b4169885d2be7042)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values
Clint Taylor [Thu, 25 Oct 2018 18:52:00 +0000 (11:52 -0700)]
drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values

commit 6503493145cba4413ecd3d4d153faeef4a1e9b85 upstream.

HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value
mode instead of HDMI specification values.

V2: Fix 88.2 Hz N value

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/icl: Fix the macros for DFLEXDPMLE register bits
Manasi Navare [Tue, 23 Oct 2018 19:12:47 +0000 (12:12 -0700)]
drm/i915/icl: Fix the macros for DFLEXDPMLE register bits

commit e528c2affcf216b3d02b22004895cb678769629b upstream.

This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.

Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
(cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/dp: Restrict link retrain workaround to external monitors
Dhinakaran Pandiyan [Thu, 27 Sep 2018 20:57:31 +0000 (13:57 -0700)]
drm/i915/dp: Restrict link retrain workaround to external monitors

commit f9776280c29e77a18cbc7ebb6d48f7885e494990 upstream.

Commit '3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check,
unconditionally during long pulse"")' applies a work around for sinks
that don't signal link loss. The work around does not need to have to be
that broad as the issue was seen with only one particular monitor; limit
this only for external displays as eDP features like PSR turn off the link
and the driver ends up retraining the link seeeing that link is not
synchronized.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-2-dhinakaran.pandiyan@intel.com
(cherry picked from commit f24f6eb95807bca0dbd8dc5b2f3a4099000f4472)
Fixes: 399334708b4f ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/dp: Fix link retraining comment in intel_dp_long_pulse()
Dhinakaran Pandiyan [Thu, 27 Sep 2018 20:57:30 +0000 (13:57 -0700)]
drm/i915/dp: Fix link retraining comment in intel_dp_long_pulse()

commit 49af5d95b9b3c21a84ad115a9db9acbc036d849a upstream.

Comment claims link needs to be retrained because the connected sink raised
a long pulse to indicate link loss. If the sink did so,
intel_dp_hotplug() would have handled link retraining. Looking at the
logs in Bugzilla referenced in commit '3cf71bc9904d ("drm/i915: Re-apply
Perform link quality check, unconditionally during long pulse"")', the
issue is that the sink does not trigger an interrupt. What we want is
->detect() from user space to check link status and retrain. Ville's
review for the original patch also indicates the same root cause. So,
rewrite the comment.

v2: Patch split and rewrote comment.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9ebd8202393dde9d3678c9ec162c1aa63ba17eac)
Fixes: 399334708b4f ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Large page offsets for pread/pwrite
Chris Wilson [Fri, 12 Oct 2018 14:02:28 +0000 (15:02 +0100)]
drm/i915: Large page offsets for pread/pwrite

commit ab0d6a141843e0b4b2709dfd37b53468b5452c3a upstream.

Handle integer overflow when computing the sub-page length for shmem
backed pread/pwrite.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012140228.29783-1-chris@chris-wilson.co.uk
(cherry picked from commit a5e856a5348f6cd50889d125c40bbeec7328e466)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Skip vcpi allocation for MSTB ports that are gone
Lyude Paul [Mon, 8 Oct 2018 23:24:33 +0000 (19:24 -0400)]
drm/i915: Skip vcpi allocation for MSTB ports that are gone

commit c02ba4ef16eefe663fdefcccaa57fad32d5481bf upstream.

Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.

Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.

Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
  connector is registered - Daniel Vetter

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
(cherry picked from commit f67207d78ceaf98b7531bc22df6f21328559c8d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Don't unset intel_connector->mst_port
Lyude Paul [Mon, 8 Oct 2018 23:24:32 +0000 (19:24 -0400)]
drm/i915: Don't unset intel_connector->mst_port

commit 80c188695a77eddaa6e8885510ff4ef59fd478c3 upstream.

Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.

Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
  Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
  registered or not - Daniel Vetter

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com
(cherry picked from commit 6ed5bb1fbad34382c8cfe9a9bf737e9a43053df5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Restore vblank interrupts earlier
Ville Syrjälä [Wed, 3 Oct 2018 14:49:51 +0000 (17:49 +0300)]
drm/i915: Restore vblank interrupts earlier

commit 7cada4d0b7a0fb813dbc9777fec092e9ed0546e9 upstream.

Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.

v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)

Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com
(cherry picked from commit 68bc30deac625b8be8d3950b30dc93d09a3645f5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Use the correct crtc when sanitizing plane mapping
Ville Syrjälä [Wed, 3 Oct 2018 14:50:17 +0000 (17:50 +0300)]
drm/i915: Use the correct crtc when sanitizing plane mapping

commit 9b27390139dbe0dc10d1899545248862fe826b61 upstream.

When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.

To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.

One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.

v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
    Add Daniel's proposed comment to better document why we do this
    Drop the redundant intel_set_plane_visible() call

Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4ee86481ce044bef04859820e1bc7c1d9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's...
Manasi Navare [Tue, 9 Oct 2018 21:28:04 +0000 (14:28 -0700)]
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode

commit 041444458835d7fb2c9f042598bfe16bf375b15d upstream.

This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.

v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally

Fixes: c0cfb10d9e1d ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com
(cherry picked from commit 1e712535c51ab025ebc776d4405683d81521996d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
Hans de Goede [Fri, 12 Oct 2018 10:16:10 +0000 (12:16 +0200)]
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)

commit 0e8afefd5da4875ddea9aa4ad17a2540a2bf9736 upstream.

The Acer One 10 uses a clamshell design with a detachable keyboard.
As such in normal operating mode, with the keyboard attach the device
is in landscape mode (and the Acer logo at boot also shows in landscape
mode).

But the device uses a portrait screen rotated 90 degrees (sigh). This
commit adds a quirk for this device so that we shown the fbcon the
right way up and that we hint userspace to also show e.g. plymouth and
gdm the right way up.

Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012101610.29100-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/dp_mst: Check if primary mstb is null
Stanislav Lisovskiy [Fri, 9 Nov 2018 09:00:12 +0000 (11:00 +0200)]
drm/dp_mst: Check if primary mstb is null

commit 23d8003907d094f77cf959228e2248d6db819fa7 upstream.

Unfortunately drm_dp_get_mst_branch_device which is called from both
drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely
on that mgr->mst_primary is not NULL, which seem to be wrong as it can be
cleared with simultaneous mode set, if probing fails or in other case.
mgr->lock mutex doesn't protect against that as it might just get
assigned to NULL right before, not simultaneously.

There are currently bugs 107738, 108616 bugs which crash in
drm_dp_get_mst_branch_device, caused by this issue.

v2: Refactored the code, as it was nicely noticed.
    Fixed Bugzilla bug numbers(second was 108616, but not 108816)
    and added links.

[changed title and added stable cc]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738
Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/etnaviv: fix bogus fence complete check in timeout handler
Lucas Stach [Thu, 4 Oct 2018 09:37:00 +0000 (11:37 +0200)]
drm/etnaviv: fix bogus fence complete check in timeout handler

commit 6fce3a406108ee6c8a61e2a33e52e9198a626ea0 upstream.

The GPU hardware fences and the job out-fences are on different timelines
so it's wrong to compare them. Fix this by only looking at the out-fence.

Cc: <stable@vger.kernel.org>
Fixes: 2c83a726d6fb (drm/etnaviv: bring back progress check in job
                     timeout handler)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD
Akshu Agrawal [Mon, 24 Sep 2018 10:18:02 +0000 (15:48 +0530)]
drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD

commit 51ef434a15b450bfbef1e06cc87ee4e98a224486 upstream.

We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
Multiple runs of power measurement shows no imapct.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/nouveau: Fix nv50_mstc->best_encoder()
Lyude Paul [Mon, 8 Oct 2018 23:24:31 +0000 (19:24 -0400)]
drm/nouveau: Fix nv50_mstc->best_encoder()

commit 7b0f61e91b6056c71649efa3204112a4b6cf5fc8 upstream.

As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.

So, fix this by instead by just always returning a valid encoder.

Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
  with a much simpler solution

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
(cherry picked from commit e87b0bbc9f0380d403f8f2f6abba0d51c74d944f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/nouveau: Check backlight IDs are >= 0, not > 0
Lyude Paul [Thu, 6 Sep 2018 21:43:21 +0000 (17:43 -0400)]
drm/nouveau: Check backlight IDs are >= 0, not > 0

commit dc854914999d5d52ac1b31740cb0ea8d89d0372e upstream.

Remember, ida IDs start at 0, not 1!

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/amdgpu: Suppress keypresses from ACPI_VIDEO events
Lyude Paul [Sat, 22 Sep 2018 00:43:44 +0000 (20:43 -0400)]
drm/amdgpu: Suppress keypresses from ACPI_VIDEO events

commit 582f58de36834096a91cc1de2540c2f7269f850d upstream.

Currently we return NOTIFY_DONE for any event which we don't think is
ours. However, many laptops will send more then just an ATIF event and
will also send an ACPI_VIDEO_NOTIFY_PROBE event as well. Since we don't
check for this, we return NOTIFY_DONE which causes a keypress for the
ACPI event to be propogated to userspace. This is the equivalent of
someone pressing the display key on a laptop every time there's a
hotplug event.

So, check for ACPI_VIDEO_NOTIFY_PROBE events and suppress keypresses
from them.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/amdgpu: add missing CHIP_HAINAN in amdgpu_ucode_get_load_type
Alex Deucher [Tue, 28 Aug 2018 19:16:23 +0000 (14:16 -0500)]
drm/amdgpu: add missing CHIP_HAINAN in amdgpu_ucode_get_load_type

commit d9997b64c52b70bd98c48f443f068253621d1ffc upstream.

This caused a confusing error message, but there is functionally
no problem since the default method is DIRECT.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/amdgpu: Fix typo in amdgpu_vmid_mgr_init
Rex Zhu [Fri, 12 Oct 2018 14:26:11 +0000 (22:26 +0800)]
drm/amdgpu: Fix typo in amdgpu_vmid_mgr_init

commit 3df27645395e8f79c0dc20a15cf1da61f376000d upstream.

fix a typo in for loop: i->j

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/rockchip: Allow driver to be shutdown on reboot/kexec
Marc Zyngier [Sun, 5 Aug 2018 12:48:07 +0000 (13:48 +0100)]
drm/rockchip: Allow driver to be shutdown on reboot/kexec

commit 7f3ef5dedb146e3d5063b6845781ad1bb59b92b5 upstream.

Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.

In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).

A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoscripts/spdxcheck.py: make python3 compliant
Uwe Kleine-König [Fri, 16 Nov 2018 23:08:43 +0000 (15:08 -0800)]
scripts/spdxcheck.py: make python3 compliant

commit 6f4d29df66acd49303a99025046b85cabe7aa17a upstream.

Without this change the following happens when using Python3 (3.6.6):

$ echo "GPL-2.0" | python3 scripts/spdxcheck.py -
FAIL: 'str' object has no attribute 'decode'
Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 253, in <module>
    parser.parse_lines(sys.stdin, args.maxlines, '-')
  File "scripts/spdxcheck.py", line 171, in parse_lines
    line = line.decode(locale.getpreferredencoding(False), errors='ignore')
AttributeError: 'str' object has no attribute 'decode'

So as the line is already a string, there is no need to decode it and
the line can be dropped.

/usr/bin/python on Arch is Python 3.  So this would indeed be worth
going into 4.19.

Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomm: don't reclaim inodes with many attached pages
Roman Gushchin [Fri, 16 Nov 2018 23:08:18 +0000 (15:08 -0800)]
mm: don't reclaim inodes with many attached pages

commit a76cf1a474d7dbcd9336b5f5afb0162baa142cf0 upstream.

Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a
relatively small number of objects") leads to a regression on his setup:
periodically the majority of the pagecache is evicted without an obvious
reason, while before the change the amount of free memory was balancing
around the watermark.

The reason behind is that the mentioned above change created some
minimal background pressure on the inode cache.  The problem is that if
an inode is considered to be reclaimed, all belonging pagecache page are
stripped, no matter how many of them are there.  So, if a huge
multi-gigabyte file is cached in the memory, and the goal is to reclaim
only few slab objects (unused inodes), we still can eventually evict all
gigabytes of the pagecache at once.

The workload described by Spock has few large non-mapped files in the
pagecache, so it's especially noticeable.

To solve the problem let's postpone the reclaim of inodes, which have
more than 1 attached page.  Let's wait until the pagecache pages will be
evicted naturally by scanning the corresponding LRU lists, and only then
reclaim the inode structure.

Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Spock <dairinin@gmail.com>
Tested-by: Spock <dairinin@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoefi/arm/libstub: Pack FDT after populating it
Ard Biesheuvel [Wed, 14 Nov 2018 17:55:42 +0000 (09:55 -0800)]
efi/arm/libstub: Pack FDT after populating it

commit 72a58a63a164b4e9d2d914e65caeb551846883f1 upstream.

Commit:

  24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")

increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.

However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.

So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomm/swapfile.c: use kvzalloc for swap_info_struct allocation
Vasily Averin [Fri, 16 Nov 2018 23:08:11 +0000 (15:08 -0800)]
mm/swapfile.c: use kvzalloc for swap_info_struct allocation

commit 873d7bcfd066663e3e50113dc4a0de19289b6354 upstream.

Commit a2468cc9bfdf ("swap: choose swap device according to numa node")
changed 'avail_lists' field of 'struct swap_info_struct' to an array.
In popular linux distros it increased size of swap_info_struct up to 40
Kbytes and now swap_info_struct allocation requires order-4 page.
Switch to kvzmalloc allows to avoid unexpected allocation failures.

Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com
Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agohugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
Mike Kravetz [Fri, 16 Nov 2018 23:08:04 +0000 (15:08 -0800)]
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!

commit 5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream.

This bug has been experienced several times by the Oracle DB team.  The
BUG is in remove_inode_hugepages() as follows:

/*
 * If page is mapped, it was faulted in after being
 * unmapped in caller.  Unmap (again) now after taking
 * the fault mutex.  The mutex will prevent faults
 * until we finish removing the page.
 *
 * This race can only happen in the hole punch case.
 * Getting here in a truncate operation is a bug.
 */
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);

In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code.  Consider the following:

 - Process A maps a hugetlbfs file of sufficient size and alignment
   (PUD_SIZE) that a pmd page could be shared.

 - Process B maps the same hugetlbfs file with the same size and
   alignment such that a pmd page is shared.

 - Process B then calls mprotect() to change protections for the mapping
   with the shared pmd. As a result, the pmd is 'unshared'.

 - Process B then calls mprotect() again to chage protections for the
   mapping back to their original value. pmd remains unshared.

 - Process B then forks and process C is created. During the fork
   process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
   tables. Copying page tables for hugetlb mappings is done in the
   routine copy_hugetlb_page_range.

In copy_hugetlb_page_range(), the destination pte is obtained by:

dst_pte = huge_pte_alloc(dst, addr, sz);

If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table.  In the situation above, process C could share with
either process A or process B.  Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.

However, the check for pmd sharing in copy_hugetlb_page_range is:

/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;

Since process C is sharing with process A instead of process B, the
above test fails.  The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte.  It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page.  This is how we end up with an elevated map count.

To solve, check the dst_pte entry for huge_pte_none.  If !none, this
implies PMD sharing so do not copy.

Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agolib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
Arnd Bergmann [Fri, 16 Nov 2018 23:08:35 +0000 (15:08 -0800)]
lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn

commit 1c23b4108d716cc848b38532063a8aca4f86add8 upstream.

gcc-8 complains about the prototype for this function:

  lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes]

This is actually a GCC's bug. In GCC internals
__ubsan_handle_builtin_unreachable() declared with both 'noreturn' and
'const' attributes instead of only 'noreturn':

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210

Workaround this by removing the noreturn attribute.

[aryabinin: add information about GCC bug in changelog]
Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agocrypto: user - fix leaking uninitialized memory to userspace
Eric Biggers [Sat, 3 Nov 2018 21:56:00 +0000 (14:56 -0700)]
crypto: user - fix leaking uninitialized memory to userspace

commit f43f39958beb206b53292801e216d9b8a660f087 upstream.

All bytes of the NETLINK_CRYPTO report structures must be initialized,
since they are copied to userspace.  The change from strncpy() to
strlcpy() broke this.  As a minimal fix, change it back.

Fixes: 4473710df1f8 ("crypto: user - Prepare for CRYPTO_MAX_ALG_NAME expansion")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agolibata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
Diego Viola [Mon, 12 Nov 2018 19:22:52 +0000 (17:22 -0200)]
libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD

commit 410b5c7b48368317af95f0113692561d01d8144e upstream.

med_power_with_dipm still causes freezes after updating the firmware to
the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Cc: stable@vger.kernel.org
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agogfs2: Fix metadata read-ahead during truncate (2)
Andreas Gruenbacher [Thu, 8 Nov 2018 20:14:29 +0000 (20:14 +0000)]
gfs2: Fix metadata read-ahead during truncate (2)

commit e7445ceddfc220c1aede6d42758a5acb8844e9c3 upstream.

The previous attempt to fix for metadata read-ahead during truncate was
incorrect: for files with a height > 2 (1006989312 bytes with a block
size of 4096 bytes), read-ahead requests were not being issued for some
of the indirect blocks discovered while walking the metadata tree,
leading to significant slow-downs when deleting large files.  Fix that.

In addition, only issue read-ahead requests in the first pass through
the meta-data tree, while deallocating data blocks.

Fixes: c3ce5aa9b0 ("gfs2: Fix metadata read-ahead during truncate")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agogfs2: Put bitmap buffers in put_super
Andreas Gruenbacher [Mon, 5 Nov 2018 22:57:24 +0000 (22:57 +0000)]
gfs2: Put bitmap buffers in put_super

commit 10283ea525d30f2e99828978fd04d8427876a7ad upstream.

gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects
attached to the resource group glocks.  That function should release the
buffers attached to the gfs2_bitmap objects (bi_bh), but the call to
gfs2_rgrp_brelse for doing that is missing.

When gfs2_releasepage later runs across these buffers which are still
referenced, it refuses to free them.  This causes the pages the buffers
are attached to to remain referenced as well.  With enough mount/unmount
cycles, the system will eventually run out of memory.

Fix this by adding the missing call to gfs2_rgrp_brelse in
gfs2_clear_rgrpd.

(Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.)

Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoselinux: check length properly in SCTP bind hook
Ondrej Mosnacek [Tue, 13 Nov 2018 15:16:08 +0000 (16:16 +0100)]
selinux: check length properly in SCTP bind hook

commit c138325fb8713472d5a0c3c7258b9131bab40725 upstream.

selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.

The length of the whole address ('len') is already checked in the
callees.

Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930fd3b9 ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agofuse: fix possibly missed wake-up after abort
Miklos Szeredi [Fri, 9 Nov 2018 14:52:16 +0000 (15:52 +0100)]
fuse: fix possibly missed wake-up after abort

commit 2d84a2d19b6150c6dbac1e6ebad9c82e4c123772 upstream.

In current fuse_drop_waiting() implementation it's possible that
fuse_wait_aborted() will not be woken up in the unlikely case that
fuse_abort_conn() + fuse_wait_aborted() runs in between checking
fc->connected and calling atomic_dec(&fc->num_waiting).

Do the atomic_dec_and_test() unconditionally, which also provides the
necessary barrier against reordering with the fc->connected check.

The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since
the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE
barrier after resetting fc->connected.  However, this is not a performance
sensitive path, and adding the explicit barrier makes it easier to
document.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Cc: <stable@vger.kernel.org> #v4.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agofuse: fix leaked notify reply
Miklos Szeredi [Fri, 9 Nov 2018 14:52:16 +0000 (15:52 +0100)]
fuse: fix leaked notify reply

commit 7fabaf303458fcabb694999d6fa772cc13d4e217 upstream.

fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted).  Don't leak request reference in this
case.  Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.

Fixes: 2d45ba381a74 ("fuse: add retrieve request")
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agofuse: fix use-after-free in fuse_direct_IO()
Lukas Czerner [Fri, 9 Nov 2018 13:51:46 +0000 (14:51 +0100)]
fuse: fix use-after-free in fuse_direct_IO()

commit ebacb81273599555a7a19f7754a1451206a5fc4f upstream.

In async IO blocking case the additional reference to the io is taken for
it to survive fuse_aio_complete(). In non blocking case this additional
reference is not needed, however we still reference io to figure out
whether to wait for completion or not. This is wrong and will lead to
use-after-free. Fix it by storing blocking information in separate
variable.

This was spotted by KASAN when running generic/208 fstest.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 744742d692e3 ("fuse: Add reference counting for fuse_io_priv")
Cc: <stable@vger.kernel.org> # v4.6
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agortc: hctosys: Add missing range error reporting
Maciej W. Rozycki [Mon, 5 Nov 2018 03:48:25 +0000 (03:48 +0000)]
rtc: hctosys: Add missing range error reporting

commit 7ce9a992ffde8ce93d5ae5767362a5c7389ae895 upstream.

Fix an issue with the 32-bit range error path in `rtc_hctosys' where no
error code is set and consequently the successful preceding call result
from `rtc_read_time' is propagated to `rtc_hctosys_ret'.  This in turn
makes any subsequent call to `hctosys_show' incorrectly report in sysfs
that the system time has been set from this RTC while it has not.

Set the error to ERANGE then if we can't express the result due to an
overflow.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: b3a5ac42ab18 ("rtc: hctosys: Ensure system time doesn't overflow time_t")
Cc: stable@vger.kernel.org # 4.17+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonfsd: COPY and CLONE operations require the saved filehandle to be set
Scott Mayhew [Thu, 8 Nov 2018 16:11:36 +0000 (11:11 -0500)]
nfsd: COPY and CLONE operations require the saved filehandle to be set

commit 01310bb7c9c98752cc763b36532fab028e0f8f81 upstream.

Make sure we have a saved filehandle, otherwise we'll oops with a null
pointer dereference in nfs4_preprocess_stateid_op().

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoNFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
Trond Myklebust [Mon, 5 Nov 2018 16:10:50 +0000 (11:10 -0500)]
NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING

commit 21a446cf186570168b7281b154b1993968598aca upstream.

If we exit the NFSv4 state manager due to a umount, then we can end up
leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes
the nfs4_client to be rereferenced before it is destroyed, then we end
up never being able to recover state.

Fixes: 47c2199b6eb5 ("NFSv4.1: Ensure state manager thread dies on last ...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosunrpc: correct the computation for page_ptr when truncating
Frank Sorenson [Tue, 30 Oct 2018 20:10:40 +0000 (15:10 -0500)]
sunrpc: correct the computation for page_ptr when truncating

commit 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.

When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.

We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.

We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.

Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agokdb: print real address of pointers instead of hashed addresses
Christophe Leroy [Thu, 27 Sep 2018 17:17:57 +0000 (17:17 +0000)]
kdb: print real address of pointers instead of hashed addresses

commit 568fb6f42ac6851320adaea25f8f1b94de14e40a upstream.

Since commit ad67b74d2469 ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:

    Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
    kdb> ps
    15 sleeping system daemon (state M) processes suppressed,
    use 'ps A' to see all.
    Task Addr       Pid   Parent [*] cpu State Thread     Command
    0x(ptrval)      329      328  1    0   R  0x(ptrval) *sh

    0x(ptrval)        1        0  0    0   S  0x(ptrval)  init
    0x(ptrval)        3        2  0    0   D  0x(ptrval)  rcu_gp
    0x(ptrval)        4        2  0    0   D  0x(ptrval)  rcu_par_gp
    0x(ptrval)        5        2  0    0   D  0x(ptrval)  kworker/0:0
    0x(ptrval)        6        2  0    0   D  0x(ptrval)  kworker/0:0H
    0x(ptrval)        7        2  0    0   D  0x(ptrval)  kworker/u2:0
    0x(ptrval)        8        2  0    0   D  0x(ptrval)  mm_percpu_wq
    0x(ptrval)       10        2  0    0   D  0x(ptrval)  rcu_preempt

The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.

This patch replaces all %p by %px in kdb in order to display real
addresses.

Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agokdb: use correct pointer when 'btc' calls 'btt'
Christophe Leroy [Thu, 27 Sep 2018 17:17:49 +0000 (17:17 +0000)]
kdb: use correct pointer when 'btc' calls 'btt'

commit dded2e159208a9edc21dd5c5f583afa28d378d39 upstream.

On a powerpc 8xx, 'btc' fails as follows:

Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0

when booting the kernel with 'debug_boot_weak_hash', it fails as well

Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80

On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139

This is due to btc calling 'btt' with %p pointer as an argument.

This patch replaces %p by %px to get the real pointer value as
expected by 'btt'

Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
Ulf Hansson [Thu, 1 Nov 2018 12:22:38 +0000 (13:22 +0100)]
ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO

commit 763f191af51f127cf8e69cd361f50bf6180768a5 upstream.

There's no point to register the cpuidle driver for the current CPU, when
the initialization of the arch specific back-end data fails by returning
-ENXIO.

Instead, let's re-order the sequence to its original flow, by first trying
to initialize the back-end part and then act accordingly on the returned
error code. Additionally, let's print the error message, no matter of what
error code that was returned.

Fixes: a0d46a3dfdc3 (ARM: cpuidle: Register per cpuidle device)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agouapi: fix linux/kfd_ioctl.h userspace compilation errors
Dmitry V. Levin [Thu, 1 Nov 2018 11:03:08 +0000 (14:03 +0300)]
uapi: fix linux/kfd_ioctl.h userspace compilation errors

commit aba118389a6fb2ad7958de0f37b5869852bd38cf upstream.

Consistently use types provided by <linux/types.h> via <drm/drm.h>
to fix the following linux/kfd_ioctl.h userspace compilation errors:

/usr/include/linux/kfd_ioctl.h:250:2: error: unknown type name 'uint32_t'
  uint32_t reset_type;
/usr/include/linux/kfd_ioctl.h:251:2: error: unknown type name 'uint32_t'
  uint32_t reset_cause;
/usr/include/linux/kfd_ioctl.h:252:2: error: unknown type name 'uint32_t'
  uint32_t memory_lost;
/usr/include/linux/kfd_ioctl.h:253:2: error: unknown type name 'uint32_t'
  uint32_t gpu_id;

Fixes: 0c119abad7f0d ("drm/amd: Add kfd ioctl defines for hw_exception event")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomnt: fix __detach_mounts infinite loop
Benjamin Coddington [Wed, 3 Oct 2018 14:18:33 +0000 (10:18 -0400)]
mnt: fix __detach_mounts infinite loop

commit 1e9c75fb9c47a75a9aec0cd17db5f6dc36b58e00 upstream.

Since commit ff17fa561a04 ("d_invalidate(): unhash immediately")
immediately unhashes the dentry, we'll never return the mountpoint in
lookup_mountpoint(), which can lead to an unbreakable loop in
d_invalidate().

I have reports of NFS clients getting into this condition after the server
removes an export of an existing mount created through follow_automount(),
but I suspect there are various other ways to produce this problem if we
hunt down users of d_invalidate().  For example, it is possible to get into
this state by using XFS' d_invalidate() call in xfs_vn_unlink():

truncate -s 100m img{1,2}

mkfs.xfs -q -n version=ci img1
mkfs.xfs -q -n version=ci img2

mkdir -p /mnt/xfs
mount img1 /mnt/xfs

mkdir /mnt/xfs/sub1
mount img2 /mnt/xfs/sub1

cat > /mnt/xfs/sub1/foo &
umount -l /mnt/xfs/sub1
mount img2 /mnt/xfs/sub1

mount --make-private /mnt/xfs

mkdir /mnt/xfs/sub2
mount --move /mnt/xfs/sub1 /mnt/xfs/sub2
rmdir /mnt/xfs/sub1

Fix this by moving the check for an unlinked dentry out of the
detach_mounts() path.

Fixes: ff17fa561a04 ("d_invalidate(): unhash immediately")
Cc: stable@vger.kernel.org
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomount: Prevent MNT_DETACH from disconnecting locked mounts
Eric W. Biederman [Thu, 25 Oct 2018 17:05:11 +0000 (12:05 -0500)]
mount: Prevent MNT_DETACH from disconnecting locked mounts

commit 9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 upstream.

Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
>   Mounts that come as a single unit from more privileged mount are locked
>   together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0

I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace.  Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.

There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
  the vfsmounts being unmounted.  This effects the lazy rcu walk by
  kicking the walk out of rcu mode and forcing it to be a non-lazy
  walk.
- No longer disconnecting locked mounts will keep some mounts around
  longer as they stay because the are locked to other mounts.

There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.

In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.

In put_mnt_ns there may be references from process outside the mount
namespace to the mounts.  So the mounts remaining connected will
be the bug fix that is needed.  That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.

Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
Eric W. Biederman [Thu, 25 Oct 2018 14:04:18 +0000 (09:04 -0500)]
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts

commit df7342b240185d58d3d9665c0bbf0a0f5570ec29 upstream.

Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.

Reproducer:
  # Hide a path to all users using a tmpfs
  root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
  root@castiana:~#

  # As an unprivileged user, unshare user namespace and mount namespace
  stgraber@castiana:~$ unshare -U -m -r

  # Confirm the path is still not accessible
  root@castiana:~# ls /sys/devices/

  # Make /sys recursively unbindable and private
  root@castiana:~# mount --make-runbindable /sys
  root@castiana:~# mount --make-private /sys

  # Recursively bind-mount the rest of /sys over to /mnnt
  root@castiana:~# mount --rbind /sys/ /mnt

  # Access our hidden /sys/device as an unprivileged user
  root@castiana:~# ls /mnt/devices/
  breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
  LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
  tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual

Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.

Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomount: Retest MNT_LOCKED in do_umount
Eric W. Biederman [Mon, 22 Oct 2018 15:21:38 +0000 (10:21 -0500)]
mount: Retest MNT_LOCKED in do_umount

commit 25d202ed820ee347edec0bf3bf553544556bf64b upstream.

It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.

Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held.  As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix buffer leak in __ext4_read_dirblock() on error path
Vasily Averin [Thu, 8 Nov 2018 03:36:23 +0000 (22:36 -0500)]
ext4: fix buffer leak in __ext4_read_dirblock() on error path

commit de59fae0043f07de5d25e02ca360f7d57bfa5866 upstream.

Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path
Vasily Averin [Wed, 7 Nov 2018 16:14:35 +0000 (11:14 -0500)]
ext4: fix buffer leak in ext4_expand_extra_isize_ea() on error path

commit 53692ec074d00589c2cf1d6d17ca76ad0adce6ec upstream.

Fixes: de05ca852679 ("ext4: move call to ext4_error() into ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.17
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix buffer leak in ext4_xattr_move_to_block() on error path
Vasily Averin [Wed, 7 Nov 2018 16:10:21 +0000 (11:10 -0500)]
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path

commit 6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f upstream.

Fixes: 3f2571c1f91f ("ext4: factor out xattr moving")
Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.23
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: release bs.bh before re-using in ext4_xattr_block_find()
Vasily Averin [Wed, 7 Nov 2018 16:07:01 +0000 (11:07 -0500)]
ext4: release bs.bh before re-using in ext4_xattr_block_find()

commit 45ae932d246f721e6584430017176cbcadfde610 upstream.

bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using

Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.26
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix buffer leak in ext4_xattr_get_block() on error path
Vasily Averin [Wed, 7 Nov 2018 16:01:33 +0000 (11:01 -0500)]
ext4: fix buffer leak in ext4_xattr_get_block() on error path

commit ecaaf408478b6fb4d9986f9b6652f3824e374f4c upstream.

Fixes: dec214d00e0d ("ext4: xattr inode deduplication")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix possible leak of s_journal_flag_rwsem in error path
Vasily Averin [Wed, 7 Nov 2018 15:56:28 +0000 (10:56 -0500)]
ext4: fix possible leak of s_journal_flag_rwsem in error path

commit af18e35bfd01e6d65a5e3ef84ffe8b252d1628c5 upstream.

Fixes: c8585c6fcaf2 ("ext4: fix races between changing inode journal ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix possible leak of sbi->s_group_desc_leak in error path
Theodore Ts'o [Wed, 7 Nov 2018 15:32:53 +0000 (10:32 -0500)]
ext4: fix possible leak of sbi->s_group_desc_leak in error path

commit 9e463084cdb22e0b56b2dfbc50461020409a5fd3 upstream.

Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: avoid possible double brelse() in add_new_gdb() on error path
Theodore Ts'o [Tue, 6 Nov 2018 22:18:17 +0000 (17:18 -0500)]
ext4: avoid possible double brelse() in add_new_gdb() on error path

commit 4f32c38b4662312dd3c5f113d8bdd459887fb773 upstream.

Fixes: b40971426a83 ("ext4: add error checking to calls to ...")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.38
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
Vasily Averin [Tue, 6 Nov 2018 21:16:01 +0000 (16:16 -0500)]
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing

commit f348e2241fb73515d65b5d77dd9c174128a7fbf2 upstream.

Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: avoid buffer leak in ext4_orphan_add() after prior errors
Vasily Averin [Tue, 6 Nov 2018 22:01:36 +0000 (17:01 -0500)]
ext4: avoid buffer leak in ext4_orphan_add() after prior errors

commit feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 upstream.

Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock")
Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link")
Cc: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.34
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()
Vasily Averin [Tue, 6 Nov 2018 21:49:50 +0000 (16:49 -0500)]
ext4: avoid buffer leak on shutdown in ext4_mark_iloc_dirty()

commit a6758309a005060b8297a538a457c88699cb2520 upstream.

ext4_mark_iloc_dirty() callers expect that it releases iloc->bh
even if it returns an error.

Fixes: 0db1ff222d40 ("ext4: add shutdown bit and check for it")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.11
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: fix possible inode leak in the retry loop of ext4_resize_fs()
Vasily Averin [Tue, 6 Nov 2018 21:20:40 +0000 (16:20 -0500)]
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()

commit db6aee62406d9fbb53315fcddd81f1dc271d49fa upstream.

Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: missing !bh check in ext4_xattr_inode_write()
Vasily Averin [Fri, 9 Nov 2018 16:34:40 +0000 (11:34 -0500)]
ext4: missing !bh check in ext4_xattr_inode_write()

commit eb6984fa4ce2837dcb1f66720a600f31b0bb3739 upstream.

According to Ted Ts'o ext4_getblk() called in ext4_xattr_inode_write()
should not return bh = NULL

The only time that bh could be NULL, then, would be in the case of
something really going wrong; a programming error elsewhere (perhaps a
wild pointer dereference) or I/O error causing on-disk file system
corruption (although that would be highly unlikely given that we had
*just* allocated the blocks and so the metadata blocks in question
probably would still be in the cache).

Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: avoid potential extra brelse in setup_new_flex_group_blocks()
Vasily Averin [Sat, 3 Nov 2018 20:13:17 +0000 (16:13 -0400)]
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()

commit 9e4028935cca3f9ef9b6a90df9da6f1f94853536 upstream.

Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()

Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.

Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: add missing brelse() add_new_gdb_meta_bg()'s error path
Vasily Averin [Sat, 3 Nov 2018 20:50:08 +0000 (16:50 -0400)]
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path

commit 61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 upstream.

Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
Vasily Averin [Sat, 3 Nov 2018 20:22:10 +0000 (16:22 -0400)]
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path

commit cea5794122125bf67559906a0762186cf417099c upstream.

Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Cc: stable@kernel.org # 3.3
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoext4: add missing brelse() update_backups()'s error path
Vasily Averin [Sat, 3 Nov 2018 21:11:19 +0000 (17:11 -0400)]
ext4: add missing brelse() update_backups()'s error path

commit ea0abbb648452cdb6e1734b702b6330a7448fcf8 upstream.

Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoclockevents/drivers/i8253: Add support for PIT shutdown quirk
Michael Kelley [Sun, 4 Nov 2018 03:48:54 +0000 (03:48 +0000)]
clockevents/drivers/i8253: Add support for PIT shutdown quirk

commit 35b69a420bfb56b7b74cb635ea903db05e357bec upstream.

Add support for platforms where pit_shutdown() doesn't work because of a
quirk in the PIT emulation. On these platforms setting the counter register
to zero causes the PIT to start running again, negating the shutdown.

Provide a global variable that controls whether the counter register is
zero'ed, which platform specific code can override.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "virtualization@lists.linux-foundation.org" <virtualization@lists.linux-foundation.org>
Cc: "jgross@suse.com" <jgross@suse.com>
Cc: "akataria@vmware.com" <akataria@vmware.com>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: vkuznets <vkuznets@redhat.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1541303219-11142-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agobtrfs: tree-checker: Fix misleading group system information
Shaokun Zhang [Mon, 5 Nov 2018 10:49:09 +0000 (18:49 +0800)]
btrfs: tree-checker: Fix misleading group system information

commit 761333f2f50ccc887aa9957ae829300262c0d15b upstream.

block_group_err shows the group system as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Fixes: fce466eab7ac6 ("btrfs: tree-checker: Verify block_group_item")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoBtrfs: fix data corruption due to cloning of eof block
Filipe Manana [Mon, 5 Nov 2018 11:14:17 +0000 (11:14 +0000)]
Btrfs: fix data corruption due to cloning of eof block

commit ac765f83f1397646c11092a032d4f62c3d478b81 upstream.

We currently allow cloning a range from a file which includes the last
block of the file even if the file's size is not aligned to the block
size. This is fine and useful when the destination file has the same size,
but when it does not and the range ends somewhere in the middle of the
destination file, it leads to corruption because the bytes between the EOF
and the end of the block have undefined data (when there is support for
discard/trimming they have a value of 0x00).

Example:

 $ mkfs.btrfs -f /dev/sdb
 $ mount /dev/sdb /mnt

 $ export foo_size=$((256 * 1024 + 100))
 $ xfs_io -f -c "pwrite -S 0x3c 0 $foo_size" /mnt/foo
 $ xfs_io -f -c "pwrite -S 0xb5 0 1M" /mnt/bar

 $ xfs_io -c "reflink /mnt/foo 0 512K $foo_size" /mnt/bar

 $ od -A d -t x1 /mnt/bar
 0000000 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
 *
 0524288 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c 3c
 *
 0786528 3c 3c 3c 3c 00 00 00 00 00 00 00 00 00 00 00 00
 0786544 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 *
 0790528 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5 b5
 *
 1048576

The bytes in the range from 786532 (512Kb + 256Kb + 100 bytes) to 790527
(512Kb + 256Kb + 4Kb - 1) got corrupted, having now a value of 0x00 instead
of 0xb5.

This is similar to the problem we had for deduplication that got recently
fixed by commit de02b9f6bb65 ("Btrfs: fix data corruption when
deduplicating between different files").

Fix this by not allowing such operations to be performed and return the
errno -EINVAL to user space. This is what XFS is doing as well at the VFS
level. This change however now makes us return -EINVAL instead of
-EOPNOTSUPP for cases where the source range maps to an inline extent and
the destination range's end is smaller then the destination file's size,
since the detection of inline extents is done during the actual process of
dropping file extent items (at __btrfs_drop_extents()). Returning the
-EINVAL error is done early on and solely based on the input parameters
(offsets and length) and destination file's size. This makes us consistent
with XFS and anyone else supporting cloning since this case is now checked
at a higher level in the VFS and is where the -EINVAL will be returned
from starting with kernel 4.20 (the VFS changed was introduced in 4.20-rc1
by commit 07d19dc9fbe9 ("vfs: avoid problematic remapping requests into
partial EOF block"). So this change is more geared towards stable kernels,
as it's unlikely the new VFS checks get removed intentionally.

A test case for fstests follows soon, as well as an update to filter
existing tests that expect -EOPNOTSUPP to accept -EINVAL as well.

CC: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoBtrfs: fix infinite loop on inode eviction after deduplication of eof block
Filipe Manana [Mon, 5 Nov 2018 11:14:05 +0000 (11:14 +0000)]
Btrfs: fix infinite loop on inode eviction after deduplication of eof block

commit 11023d3f5fdf89bba5e1142127701ca6e6014587 upstream.

If we attempt to deduplicate the last block of a file A into the middle of
a file B, and file A's size is not a multiple of the block size, we end
rounding the deduplication length to 0 bytes, to avoid the data corruption
issue fixed by commit de02b9f6bb65 ("Btrfs: fix data corruption when
deduplicating between different files"). However a length of zero will
cause the insertion of an extent state with a start value greater (by 1)
then the end value, leading to a corrupt extent state that will trigger a
warning and cause chaos such as an infinite loop during inode eviction.
Example trace:

 [96049.833585] ------------[ cut here ]------------
 [96049.833714] WARNING: CPU: 0 PID: 24448 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs]
 [96049.833767] CPU: 0 PID: 24448 Comm: xfs_io Not tainted 4.19.0-rc7-btrfs-next-39 #1
 [96049.833768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
 [96049.833780] RIP: 0010:insert_state+0x101/0x120 [btrfs]
 [96049.833783] RSP: 0018:ffffafd2c3707af0 EFLAGS: 00010282
 [96049.833785] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006
 [96049.833786] RDX: 0000000000000007 RSI: ffff99045c143230 RDI: ffff99047b2168a0
 [96049.833787] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000
 [96049.833787] R10: ffffafd2c3707ab8 R11: 0000000000000000 R12: ffff9903b93b12c8
 [96049.833788] R13: 000000000004e000 R14: ffffafd2c3707b80 R15: ffffafd2c3707b78
 [96049.833790] FS:  00007f5c14e7d700(0000) GS:ffff99047b200000(0000) knlGS:0000000000000000
 [96049.833791] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [96049.833792] CR2: 00007f5c146abff8 CR3: 0000000115f4c004 CR4: 00000000003606f0
 [96049.833795] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [96049.833796] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [96049.833796] Call Trace:
 [96049.833809]  __set_extent_bit+0x46c/0x6a0 [btrfs]
 [96049.833823]  lock_extent_bits+0x6b/0x210 [btrfs]
 [96049.833831]  ? _raw_spin_unlock+0x24/0x30
 [96049.833841]  ? test_range_bit+0xdf/0x130 [btrfs]
 [96049.833853]  lock_extent_range+0x8e/0x150 [btrfs]
 [96049.833864]  btrfs_double_extent_lock+0x78/0xb0 [btrfs]
 [96049.833875]  btrfs_extent_same_range+0x14e/0x550 [btrfs]
 [96049.833885]  ? rcu_read_lock_sched_held+0x3f/0x70
 [96049.833890]  ? __kmalloc_node+0x2b0/0x2f0
 [96049.833899]  ? btrfs_dedupe_file_range+0x19a/0x280 [btrfs]
 [96049.833909]  btrfs_dedupe_file_range+0x270/0x280 [btrfs]
 [96049.833916]  vfs_dedupe_file_range_one+0xd9/0xe0
 [96049.833919]  vfs_dedupe_file_range+0x131/0x1b0
 [96049.833924]  do_vfs_ioctl+0x272/0x6e0
 [96049.833927]  ? __fget+0x113/0x200
 [96049.833931]  ksys_ioctl+0x70/0x80
 [96049.833933]  __x64_sys_ioctl+0x16/0x20
 [96049.833937]  do_syscall_64+0x60/0x1b0
 [96049.833939]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 [96049.833941] RIP: 0033:0x7f5c1478ddd7
 [96049.833943] RSP: 002b:00007ffe15b196a8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
 [96049.833945] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1478ddd7
 [96049.833946] RDX: 00005625ece322d0 RSI: 00000000c0189436 RDI: 0000000000000004
 [96049.833947] RBP: 0000000000000000 R08: 00007f5c14a46f48 R09: 0000000000000040
 [96049.833948] R10: 0000000000000541 R11: 0000000000000202 R12: 0000000000000000
 [96049.833949] R13: 0000000000000000 R14: 0000000000000004 R15: 00005625ece322d0
 [96049.833954] irq event stamp: 6196
 [96049.833956] hardirqs last  enabled at (6195): [<ffffffff91b00663>] console_unlock+0x503/0x640
 [96049.833958] hardirqs last disabled at (6196): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
 [96049.833959] softirqs last  enabled at (6114): [<ffffffff92600370>] __do_softirq+0x370/0x421
 [96049.833964] softirqs last disabled at (6095): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0
 [96049.833965] ---[ end trace db7b05f01b7fa10c ]---
 [96049.935816] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910
 [96049.935822] irq event stamp: 6584
 [96049.935823] hardirqs last  enabled at (6583): [<ffffffff91b00663>] console_unlock+0x503/0x640
 [96049.935825] hardirqs last disabled at (6584): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
 [96049.935827] softirqs last  enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421
 [96049.935828] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0
 [96049.935829] ---[ end trace db7b05f01b7fa123 ]---
 [96049.935840] ------------[ cut here ]------------
 [96049.936065] WARNING: CPU: 1 PID: 24463 at fs/btrfs/extent_io.c:436 insert_state+0x101/0x120 [btrfs]
 [96049.936107] CPU: 1 PID: 24463 Comm: umount Tainted: G        W         4.19.0-rc7-btrfs-next-39 #1
 [96049.936108] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
 [96049.936117] RIP: 0010:insert_state+0x101/0x120 [btrfs]
 [96049.936119] RSP: 0018:ffffafd2c3637bc0 EFLAGS: 00010282
 [96049.936120] RAX: 0000000000000000 RBX: 000000000004dfff RCX: 0000000000000006
 [96049.936121] RDX: 0000000000000007 RSI: ffff990445cf88e0 RDI: ffff99047b2968a0
 [96049.936122] RBP: ffff990457851cd0 R08: 0000000000000001 R09: 0000000000000000
 [96049.936123] R10: ffffafd2c3637b88 R11: 0000000000000000 R12: ffff9904574301e8
 [96049.936124] R13: 000000000004e000 R14: ffffafd2c3637c50 R15: ffffafd2c3637c48
 [96049.936125] FS:  00007fe4b87e72c0(0000) GS:ffff99047b280000(0000) knlGS:0000000000000000
 [96049.936126] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [96049.936128] CR2: 00005562e52618d8 CR3: 00000001151c8005 CR4: 00000000003606e0
 [96049.936129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [96049.936131] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [96049.936131] Call Trace:
 [96049.936141]  __set_extent_bit+0x46c/0x6a0 [btrfs]
 [96049.936154]  lock_extent_bits+0x6b/0x210 [btrfs]
 [96049.936167]  btrfs_evict_inode+0x1e1/0x5a0 [btrfs]
 [96049.936172]  evict+0xbf/0x1c0
 [96049.936174]  dispose_list+0x51/0x80
 [96049.936176]  evict_inodes+0x193/0x1c0
 [96049.936180]  generic_shutdown_super+0x3f/0x110
 [96049.936182]  kill_anon_super+0xe/0x30
 [96049.936189]  btrfs_kill_super+0x13/0x100 [btrfs]
 [96049.936191]  deactivate_locked_super+0x3a/0x70
 [96049.936193]  cleanup_mnt+0x3b/0x80
 [96049.936195]  task_work_run+0x93/0xc0
 [96049.936198]  exit_to_usermode_loop+0xfa/0x100
 [96049.936201]  do_syscall_64+0x17f/0x1b0
 [96049.936202]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 [96049.936204] RIP: 0033:0x7fe4b80cfb37
 [96049.936206] RSP: 002b:00007ffff092b688 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
 [96049.936207] RAX: 0000000000000000 RBX: 00005562e5259060 RCX: 00007fe4b80cfb37
 [96049.936208] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00005562e525faa0
 [96049.936209] RBP: 00005562e525faa0 R08: 00005562e525f770 R09: 0000000000000015
 [96049.936210] R10: 00000000000006b4 R11: 0000000000000246 R12: 00007fe4b85d1e64
 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910
 [96049.936211] R13: 0000000000000000 R14: 00005562e5259240 R15: 00007ffff092b910
 [96049.936216] irq event stamp: 6616
 [96049.936219] hardirqs last  enabled at (6615): [<ffffffff91b00663>] console_unlock+0x503/0x640
 [96049.936219] hardirqs last disabled at (6616): [<ffffffff91a037dd>] trace_hardirqs_off_thunk+0x1a/0x1c
 [96049.936222] softirqs last  enabled at (6328): [<ffffffff92600370>] __do_softirq+0x370/0x421
 [96049.936222] softirqs last disabled at (6313): [<ffffffff91a8dd4d>] irq_exit+0xcd/0xe0
 [96049.936223] ---[ end trace db7b05f01b7fa124 ]---

The second stack trace, from inode eviction, is repeated forever due to
the infinite loop during eviction.

This is the same type of problem fixed way back in 2015 by commit
113e8283869b ("Btrfs: fix inode eviction infinite loop after extent_same
ioctl") and commit ccccf3d67294 ("Btrfs: fix inode eviction infinite loop
after cloning into it").

So fix this by returning immediately if the deduplication range length
gets rounded down to 0 bytes, as there is nothing that needs to be done in
such case.

Example reproducer:

 $ mkfs.btrfs -f /dev/sdb
 $ mount /dev/sdb /mnt

 $ xfs_io -f -c "pwrite -S 0xe6 0 100" /mnt/foo
 $ xfs_io -f -c "pwrite -S 0xe6 0 1M" /mnt/bar

 # Unmount the filesystem and mount it again so that we start without any
 # extent state records when we ask for the deduplication.
 $ umount /mnt
 $ mount /dev/sdb /mnt

 $ xfs_io -c "dedupe /mnt/foo 0 500K 100" /mnt/bar

 # This unmount triggers the infinite loop.
 $ umount /mnt

A test case for fstests will follow soon.

Fixes: de02b9f6bb65 ("Btrfs: fix data corruption when deduplicating between different files")
CC: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoBtrfs: fix cur_offset in the error case for nocow
Robbie Ko [Tue, 30 Oct 2018 10:04:04 +0000 (18:04 +0800)]
Btrfs: fix cur_offset in the error case for nocow

commit 506481b20e818db40b6198815904ecd2d6daee64 upstream.

When the cow_file_range fails, the related resources are unlocked
according to the range [start..end), so the unlock cannot be repeated in
run_delalloc_nocow.

In some cases (e.g. cur_offset <= end && cow_start != -1), cur_offset is
not updated correctly, so move the cur_offset update before
cow_file_range.

  kernel BUG at mm/page-writeback.c:2663!
  Internal error: Oops - BUG: 0 [#1] SMP
  CPU: 3 PID: 31525 Comm: kworker/u8:7 Tainted: P O
  Hardware name: Realtek_RTD1296 (DT)
  Workqueue: writeback wb_workfn (flush-btrfs-1)
  task: ffffffc076db3380 ti: ffffffc02e9ac000 task.ti: ffffffc02e9ac000
  PC is at clear_page_dirty_for_io+0x1bc/0x1e8
  LR is at clear_page_dirty_for_io+0x14/0x1e8
  pc : [<ffffffc00033c91c>] lr : [<ffffffc00033c774>] pstate: 40000145
  sp : ffffffc02e9af4f0
  Process kworker/u8:7 (pid: 31525, stack limit = 0xffffffc02e9ac020)
  Call trace:
  [<ffffffc00033c91c>] clear_page_dirty_for_io+0x1bc/0x1e8
  [<ffffffbffc514674>] extent_clear_unlock_delalloc+0x1e4/0x210 [btrfs]
  [<ffffffbffc4fb168>] run_delalloc_nocow+0x3b8/0x948 [btrfs]
  [<ffffffbffc4fb948>] run_delalloc_range+0x250/0x3a8 [btrfs]
  [<ffffffbffc514c0c>] writepage_delalloc.isra.21+0xbc/0x1d8 [btrfs]
  [<ffffffbffc516048>] __extent_writepage+0xe8/0x248 [btrfs]
  [<ffffffbffc51630c>] extent_write_cache_pages.isra.17+0x164/0x378 [btrfs]
  [<ffffffbffc5185a8>] extent_writepages+0x48/0x68 [btrfs]
  [<ffffffbffc4f5828>] btrfs_writepages+0x20/0x30 [btrfs]
  [<ffffffc00033d758>] do_writepages+0x30/0x88
  [<ffffffc0003ba0f4>] __writeback_single_inode+0x34/0x198
  [<ffffffc0003ba6c4>] writeback_sb_inodes+0x184/0x3c0
  [<ffffffc0003ba96c>] __writeback_inodes_wb+0x6c/0xc0
  [<ffffffc0003bac20>] wb_writeback+0x1b8/0x1c0
  [<ffffffc0003bb0f0>] wb_workfn+0x150/0x250
  [<ffffffc0002b0014>] process_one_work+0x1dc/0x388
  [<ffffffc0002b02f0>] worker_thread+0x130/0x500
  [<ffffffc0002b6344>] kthread+0x10c/0x110
  [<ffffffc000284590>] ret_from_fork+0x10/0x40
  Code: d503201f a9025bb5 a90363b7 f90023b9 (d4210000)

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoBtrfs: fix missing data checksums after a ranged fsync (msync)
Filipe Manana [Mon, 29 Oct 2018 09:42:06 +0000 (09:42 +0000)]
Btrfs: fix missing data checksums after a ranged fsync (msync)

commit 008c6753f7e070c77c70d708a6bf0255b4381763 upstream.

Recently we got a massive simplification for fsync, where for the fast
path we no longer log new extents while their respective ordered extents
are still running.

However that simplification introduced a subtle regression for the case
where we use a ranged fsync (msync). Consider the following example:

               CPU 0                                    CPU 1

                                            mmap write to range [2Mb, 4Mb[
  mmap write to range [512Kb, 1Mb[
  msync range [512K, 1Mb[
    --> triggers fast fsync
        (BTRFS_INODE_NEEDS_FULL_SYNC
         not set)
    --> creates extent map A for this
        range and adds it to list of
        modified extents
    --> starts ordered extent A for
        this range
    --> waits for it to complete

                                            writeback triggered for range
                                            [2Mb, 4Mb[
                                              --> create extent map B and
                                                  adds it to the list of
                                                  modified extents
                                              --> creates ordered extent B

    --> start looking for and logging
        modified extents
    --> logs extent maps A and B
    --> finds checksums for extent A
        in the csum tree, but not for
        extent B
  fsync (msync) finishes

                                              --> ordered extent B
                                                  finishes and its
                                                  checksums are added
                                                  to the csum tree

                                <power cut>

After replaying the log, we have the extent covering the range [2Mb, 4Mb[
but do not have the data checksum items covering that file range.

This happens because at the very beginning of an fsync (btrfs_sync_file())
we start and wait for IO in the given range [512Kb, 1Mb[ and therefore
wait for any ordered extents in that range to complete before we start
logging the extents. However if right before we start logging the extent
in our range [512Kb, 1Mb[, writeback is started for any other dirty range,
such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync
or msync (btrfs_sync_file() starts writeback before acquiring the inode's
lock), an ordered extent is created for that other range and a new extent
map is created to represent that range and added to the inode's list of
modified extents.

That means that we will see that other extent in that list when collecting
extents for logging (done at btrfs_log_changed_extents()) and log the
extent before the respective ordered extent finishes - namely before the
checksum items are added to the checksums tree, which is where
log_extent_csums() looks for the checksums, therefore making us log an
extent without logging its checksums. Before that massive simplification
of fsync, this wasn't a problem because besides looking for checkums in
the checksums tree, we also looked for them in any ordered extent still
running.

The consequence of data checksums missing for a file range is that users
attempting to read the affected file range will get -EIO errors and dmesg
reports the following:

 [10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344
 [10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1

So fix this by skipping extents outside of our logging range at
btrfs_log_changed_extents() and leaving them on the list of modified
extents so that any subsequent ranged fsync may collect them if needed.
Also, if we find a hole extent outside of the range still log it, just
to prevent having gaps between extent items after replaying the log,
otherwise fsck will complain when we are not using the NO_HOLES feature
(fstest btrfs/056 triggers such case).

Fixes: e7175a692765 ("btrfs: remove the wait ordered logic in the log_one_extent path")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agobtrfs: fix pinned underflow after transaction aborted
Lu Fengqi [Wed, 24 Oct 2018 12:24:03 +0000 (20:24 +0800)]
btrfs: fix pinned underflow after transaction aborted

commit fcd5e74288f7d36991b1f0fb96b8c57079645e38 upstream.

When running generic/475, we may get the following warning in dmesg:

[ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G        W  O      4.19.0-rc8+ #8
[ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286
[ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007
[ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74
[ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000
[ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88
[ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100
[ 6902.129060] FS:  00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000
[ 6902.130996] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0
[ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6902.137836] Call Trace:
[ 6902.138939]  close_ctree+0x171/0x330 [btrfs]
[ 6902.140181]  ? kthread_stop+0x146/0x1f0
[ 6902.141277]  generic_shutdown_super+0x6c/0x100
[ 6902.142517]  kill_anon_super+0x14/0x30
[ 6902.143554]  btrfs_kill_super+0x13/0x100 [btrfs]
[ 6902.144790]  deactivate_locked_super+0x2f/0x70
[ 6902.146014]  cleanup_mnt+0x3b/0x70
[ 6902.147020]  task_work_run+0x9e/0xd0
[ 6902.148036]  do_syscall_64+0x470/0x600
[ 6902.149142]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 6902.150375]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 6902.151640] RIP: 0033:0x7f45077a6a7b
[ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b
[ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490
[ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0
[ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490
[ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8
[ 6902.167553] irq event stamp: 0
[ 6902.168998] hardirqs last  enabled at (0): [<0000000000000000>]           (null)
[ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.172773] softirqs last  enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.174671] softirqs last disabled at (0): [<0000000000000000>]           (null)
[ 6902.176407] ---[ end trace 463138c2986b275c ]---
[ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full
[ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536

In the above line there's "pinned=18446744073708158976" which is an
unsigned u64 value of -1392640, an obvious underflow.

When transaction_kthread is running cleanup_transaction(), another
fsstress is running btrfs_commit_transaction(). The
btrfs_finish_extent_commit() may get the same range as
btrfs_destroy_pinned_extent() got, which causes the pinned underflow.

Fixes: d4b450cd4b33 ("Btrfs: fix race between transaction commit and empty block group removal")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agowatchdog/core: Add missing prototypes for weak functions
Mathieu Malaterre [Wed, 6 Jun 2018 19:42:32 +0000 (21:42 +0200)]
watchdog/core: Add missing prototypes for weak functions

commit 81bd415c91eb966118d773dddf254aebf3022411 upstream.

The split out of the hard lockup detector exposed two new weak functions,
but no prototypes for them, which triggers the build warning:

  kernel/watchdog.c:109:12: warning: no previous prototype for ‘watchdog_nmi_enable’ [-Wmissing-prototypes]
  kernel/watchdog.c:115:13: warning: no previous prototype for ‘watchdog_nmi_disable’ [-Wmissing-prototypes]

Add the prototypes.

Fixes: 73ce0511c436 ("kernel/watchdog.c: move hardlockup detector to separate file")
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180606194232.17653-1-malat@debian.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoarch/alpha, termios: implement BOTHER, IBSHIFT and termios2
H. Peter Anvin (Intel) [Mon, 22 Oct 2018 16:19:05 +0000 (09:19 -0700)]
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2

commit d0ffb805b729322626639336986bc83fc2e60871 upstream.

Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.

Resolve both problems by #defining BOTHER to 037 on Alpha.

However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: <linux-alpha@vger.kernel.org>
Cc: <linux-serial@vger.kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotermios, tty/tty_baudrate.c: fix buffer overrun
H. Peter Anvin [Mon, 22 Oct 2018 16:19:04 +0000 (09:19 -0700)]
termios, tty/tty_baudrate.c: fix buffer overrun

commit 991a25194097006ec1e0d2e0814ff920e59e3465 upstream.

On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.

This will be followed by a much bigger cleanup/simplification patch.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Requested-by: Cc: Johan Hovold <johan@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86/hyper-v: Enable PIT shutdown quirk
Michael Kelley [Sun, 4 Nov 2018 03:48:57 +0000 (03:48 +0000)]
x86/hyper-v: Enable PIT shutdown quirk

commit 1de72c706488b7be664a601cf3843bd01e327e58 upstream.

Hyper-V emulation of the PIT has a quirk such that the normal PIT shutdown
path doesn't work, because clearing the counter register restarts the
timer.

Disable the counter clearing on PIT shutdown.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "virtualization@lists.linux-foundation.org" <virtualization@lists.linux-foundation.org>
Cc: "jgross@suse.com" <jgross@suse.com>
Cc: "akataria@vmware.com" <akataria@vmware.com>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: vkuznets <vkuznets@redhat.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1541303219-11142-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86/cpu/vmware: Do not trace vmware_sched_clock()
Steven Rostedt (VMware) [Fri, 9 Nov 2018 20:22:07 +0000 (15:22 -0500)]
x86/cpu/vmware: Do not trace vmware_sched_clock()

commit 15035388439f892017d38b05214d3cda6578af64 upstream.

When running function tracing on a Linux guest running on VMware
Workstation, the guest would crash. This is due to tracing of the
sched_clock internal call of the VMware vmware_sched_clock(), which
causes an infinite recursion within the tracing code (clock calls must
not be traced).

Make vmware_sched_clock() not traced by ftrace.

Fixes: 80e9a4f21fd7c ("x86/vmware: Add paravirt sched clock")
Reported-by: GwanYeong Kim <gy741.kim@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Alok Kataria <akataria@vmware.com>
CC: GwanYeong Kim <gy741.kim@gmail.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
CC: Thomas Gleixner <tglx@linutronix.de>
CC: virtualization@lists.linux-foundation.org
CC: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20181109152207.4d3e7d70@gandalf.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoof, numa: Validate some distance map rules
John Garry [Thu, 8 Nov 2018 10:17:03 +0000 (18:17 +0800)]
of, numa: Validate some distance map rules

commit 89c38422e072bb453e3045b8f1b962a344c3edea upstream.

Currently the NUMA distance map parsing does not validate the distance
table for the distance-matrix rules 1-2 in [1].

However the arch NUMA code may enforce some of these rules, but not all.
Such is the case for the arm64 port, which does not enforce the rule that
the distance between separates nodes cannot equal LOCAL_DISTANCE.

The patch adds the following rules validation:
- distance of node to self equals LOCAL_DISTANCE
- distance of separate nodes > LOCAL_DISTANCE

This change avoids a yet-unresolved crash reported in [2].

A note on dealing with symmetrical distances between nodes:

Validating symmetrical distances between nodes is difficult. If it were
mandated in the bindings that every distance must be recorded in the
table, then it would be easy. However, it isn't.

In addition to this, it is also possible to record [b, a] distance only
(and not [a, b]). So, when processing the table for [b, a], we cannot
assert that current distance of [a, b] != [b, a] as invalid, as [a, b]
distance may not be present in the table and current distance would be
default at REMOTE_DISTANCE.

As such, we maintain the policy that we overwrite distance [a, b] = [b, a]
for b > a. This policy is different to kernel ACPI SLIT validation, which
allows non-symmetrical distances (ACPI spec SLIT rules allow it). However,
the distance debug message is dropped as it may be misleading (for a distance
which is later overwritten).

Some final notes on semantics:

- It is implied that it is the responsibility of the arch NUMA code to
  reset the NUMA distance map for an error in distance map parsing.

- It is the responsibility of the FW NUMA topology parsing (whether OF or
  ACPI) to enforce NUMA distance rules, and not arch NUMA code.

[1] Documents/devicetree/bindings/numa.txt
[2] https://www.spinics.net/lists/arm-kernel/msg683304.html

Cc: stable@vger.kernel.org # 4.7
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoperf intel-pt: Insert callchain context into synthesized callchains
Adrian Hunter [Wed, 31 Oct 2018 09:10:42 +0000 (11:10 +0200)]
perf intel-pt: Insert callchain context into synthesized callchains

commit 242483068b4b9ad02f1653819b6e683577681e0e upstream.

In the absence of a fallback, callchains must encode also the callchain
context. Do that now there is no fallback.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/100ea2ec-ed14-b56d-d810-e0a6d2f4b069@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoperf intel-pt/bts: Calculate cpumode for synthesized samples
Adrian Hunter [Wed, 31 Oct 2018 09:10:43 +0000 (11:10 +0200)]
perf intel-pt/bts: Calculate cpumode for synthesized samples

commit 5d4f0edaa3ac4f1844ed7c64cd2bae6f1912bac5 upstream.

In the absence of a fallback, samples must provide a correct cpumode for
the 'ip'. Do that now there is no fallback.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # 4.19
Link: http://lkml.kernel.org/r/20181031091043.23465-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoperf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}
David S. Miller [Tue, 30 Oct 2018 15:12:26 +0000 (12:12 -0300)]
perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}

commit e9024d519d892b38176cafd46f68a7cdddd77412 upstream.

When processing using 'perf report -g caller', which is the default, we
ended up reverting the callchain entries received from the kernel, but
simply reverting throws away the information that tells that from a
point onwards the addresses are for userspace, kernel, guest kernel,
guest user, hypervisor.

The idea is that if we are walking backwards, for each cluster of
non-cpumode entries we have to first scan backwards for the next one and
use that for the cluster.

This seems silly and more expensive than it needs to be but it is enough
for a initial fix.

The code here is really complicated because it is intimately intertwined
with the lbr and branch handling, as well as this callchain order,
further fixes will be needed to properly take into account the cpumode
in those cases.

Another problem with ORDER_CALLER is that the NULL "0" IP that is at the
end of most callchains shows up at the top of the histogram because
every callchain contains it and with ORDER_CALLER it is the first entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Souvik Banerjee <souvik1997@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org # 4.19
Link: https://lkml.kernel.org/n/tip-2wt3ayp6j2y2f2xowixa8y6y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoperf stat: Handle different PMU names with common prefix
Thomas Richter [Tue, 23 Oct 2018 15:16:16 +0000 (17:16 +0200)]
perf stat: Handle different PMU names with common prefix

commit ea1fa48c055f833eb25f0c33188feecb7002ada5 upstream.

On s390 the CPU Measurement Facility for counters now supports
2 PMUs named cpum_cf (CPU Measurement Facility for counters) and
cpum_cf_diag (CPU Measurement Facility for diagnostic counters)
for one and the same CPU.

Running command

 [root@s35lp76 perf]# ./perf stat -e tx_c_tend \
 -- ~/mytests/cf-tx-events 1

 Measuring transactions
 TX_C_TABORT_NO_SPECIAL: 0 expected:0
 TX_C_TABORT_SPECIAL: 0 expected:0
 TX_C_TEND: 1 expected:1
 TX_NC_TABORT: 11 expected:11
 TX_NC_TEND: 1 expected:1

 Performance counter stats for '/root/mytests/cf-tx-events 1':

  2      tx_c_tend

      0.002120091 seconds time elapsed

      0.000121000 seconds user
      0.002127000 seconds sys

 [root@s35lp76 perf]#

displays output which is unexpected (and wrong):

  2      tx_c_tend

The test program definitely triggers only one transaction, as shown
in line 'TX_C_TEND: 1 expected:1'.

This is caused by the following call sequence:

pmu_lookup() scans and installs a PMU.
+--> pmu_aliases() parses all aliases in directory
.../<pmu-name>/events/* which are file names.
     +--> pmu_aliases_parse() Read each file in directory and create
                      an new alias entry. This is done with
          +--> perf_pmu__new_alias() and
       +--> __perf_pmu__new_alias() which also check for
                   identical alias names.

After pmu_aliases() returns, a complete list of event names
for this pmu has been created. Now function

pmu_add_cpu_aliases()   is called to add the events listed in the json
|                       files to the alias list of the cpu.
+--> perf_pmu__find_map()  Returns a pointer to the json events.

Now function pmu_add_cpu_aliases() scans through all events listed
in the JSON files for this CPU.
Each json event pmu name is compared with the current PMU being
built up and if they mismatch, the json event is added to the
current PMUs alias list.
To avoid duplicate entries the following comparison is done:

if (!is_arm_pmu_core(name)) {
     pname = pe->pmu ? pe->pmu : "cpu";
     if (strncmp(pname, name, strlen(pname)))
     continue;
     }

The culprit is the strncmp() function.

Using current s390 PMU naming, the first PMU is 'cpum_cf'
and a long list of events is added, among them 'tx_c_tend'

When the second PMU named 'cpum_cf_diag' is added, only one event
named 'CF_DIAG' is added by the pmu_aliases()  function.

Now function pmu_add_cpu_aliases() is invoked for PMU 'cpum_cf_diag'.
Since the CPUID string is the same for both PMUs, json file events
for PMU named 'cpum_cf' are added to the PMU 'cpm_cf_diag'

This happens because the strncmp() actually compares:

     strncmp("cpum_cf", "cpum_cf_diag", 6);

The first parameter is the pmu name taken from the event in
the json file. The second parameter is the pmu name of the PMU
currently being built.
They are different, but the length of the compare only tests the
common prefix and this returns 0(true) when it should return false.

Now all events for PMU cpum_cf are added to the alias list for pmu
cpum_cf_diag.

Later on in function parse_events_add_pmu() the event 'tx_c_end' is
searched in all available PMUs and found twice, adding it two
times to the evsel_list global variable which is the root
of all events. This results in a counter value of 2 instead
of 1.

Output with this patch:

 [root@s35lp76 perf]# ./perf stat -e tx_c_tend \
-- ~/mytests/cf-tx-events 1
 Measuring transactions
 TX_C_TABORT_NO_SPECIAL: 0 expected:0
 TX_C_TABORT_SPECIAL: 0 expected:0
 TX_C_TEND: 1 expected:1
 TX_NC_TABORT: 11 expected:11
 TX_NC_TEND: 1 expected:1

 Performance counter stats for '/root/mytests/cf-tx-events 1':

                  1      tx_c_tend

      0.001815365 seconds time elapsed

      0.000123000 seconds user
      0.001756000 seconds sys

 [root@s35lp76 perf]#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Sebastien Boisvert <sboisvert@gydle.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform")
Link: http://lkml.kernel.org/r/20181023151616.78193-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoperf cs-etm: Correct CPU mode for samples
Leo Yan [Tue, 30 Oct 2018 07:18:28 +0000 (15:18 +0800)]
perf cs-etm: Correct CPU mode for samples

commit d6c9c05fe1eb4b213b183d8a1e79416256dc833a upstream.

Since commit edeb0c90df35 ("perf tools: Stop fallbacking to kallsyms for
vdso symbols lookup"), the kernel address cannot be properly parsed to
kernel symbol with command 'perf script -k vmlinux'.  The reason is
CoreSight samples is always to set CPU mode as PERF_RECORD_MISC_USER,
thus it fails to find corresponding map/dso in below flows:

  process_sample_event()
    `-> machine__resolve()
  `-> thread__find_map(thread, sample->cpumode, sample->ip, al);

In this flow it needs to pass argument 'sample->cpumode' to tell what's
the CPU mode, before it always passed PERF_RECORD_MISC_USER but without
any failure until the commit edeb0c90df35 ("perf tools: Stop fallbacking
to kallsyms for vdso symbols lookup") has been merged.  The reason is
even with the wrong CPU mode the function thread__find_map() firstly
fails to find map but it will rollback to find kernel map for vdso
symbols lookup.  In the latest code it has removed the fallback code,
thus if CPU mode is PERF_RECORD_MISC_USER then it cannot find map
anymore with kernel address.

This patch is to correct samples CPU mode setting, it creates a new
helper function cs_etm__cpu_mode() to tell what's the CPU mode based on
the address with the info from machine structure; this patch has a bit
extension to check not only kernel and user mode, but also check for
host/guest and hypervisor mode.  Finally this patch uses the function in
instruction and branch samples and also apply in cs_etm__mem_access()
for a minor polishing.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@kernel.org # v4.19
Link: http://lkml.kernel.org/r/1540883908-17018-1-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agohwmon: (core) Fix double-free in __hwmon_device_register()
Dmitry Osipenko [Wed, 24 Oct 2018 19:37:13 +0000 (22:37 +0300)]
hwmon: (core) Fix double-free in __hwmon_device_register()

commit 74e3512731bd5c9673176425a76a7cc5efa8ddb6 upstream.

Fix double-free that happens when thermal zone setup fails, see KASAN log
below.

==================================================================
BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c

CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G    B             4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
Backtrace:
[<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24)
[<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0)
[<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250)
[<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88)
[<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200)
[<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18)
[<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294)
[<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c)
[<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8)
[<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4)
[<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578)
[<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384)
[<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4)
[<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4)
[<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c)
[<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8)
[<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c)
[<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20)
[<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec)
[<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4)
[<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c)
[<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc)
[<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240)
[<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
Exception stack(0xcf743fb0 to 0xcf743ff8)
3fa0:                                     00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000

Allocated by task 132:
 kasan_kmalloc.part.1+0x58/0xf4
 kasan_kmalloc+0x90/0xa4
 kmem_cache_alloc_trace+0x90/0x2a0
 __hwmon_device_register+0xbc/0xa7c
 hwmon_device_register_with_info+0xa0/0xa8
 devm_hwmon_device_register_with_info+0x74/0xb4
 lm90_probe+0x414/0x578
 i2c_device_probe+0x35c/0x384
 really_probe+0x290/0x3e4
 driver_probe_device+0x80/0x1c4
 __device_attach_driver+0x104/0x11c
 bus_for_each_drv+0xa4/0xc8
 __device_attach+0xf0/0x15c
 device_initial_probe+0x1c/0x20
 bus_probe_device+0xdc/0xec
 deferred_probe_work_func+0xa8/0xd4
 process_one_work+0x3dc/0x96c
 worker_thread+0x4ec/0x8bc
 kthread+0x230/0x240
 ret_from_fork+0x14/0x38
   (null)

Freed by task 132:
 __kasan_slab_free+0x12c/0x200
 kasan_slab_free+0x14/0x18
 kfree+0x90/0x294
 hwmon_dev_release+0x1c/0x20
 device_release+0x4c/0xe8
 kobject_put+0xac/0x11c
 device_unregister+0x2c/0x30
 __hwmon_device_register+0xa58/0xa7c
 hwmon_device_register_with_info+0xa0/0xa8
 devm_hwmon_device_register_with_info+0x74/0xb4
 lm90_probe+0x414/0x578
 i2c_device_probe+0x35c/0x384
 really_probe+0x290/0x3e4
 driver_probe_device+0x80/0x1c4
 __device_attach_driver+0x104/0x11c
 bus_for_each_drv+0xa4/0xc8
 __device_attach+0xf0/0x15c
 device_initial_probe+0x1c/0x20
 bus_probe_device+0xdc/0xec
 deferred_probe_work_func+0xa8/0xd4
 process_one_work+0x3dc/0x96c
 worker_thread+0x4ec/0x8bc
 kthread+0x230/0x240
 ret_from_fork+0x14/0x38
   (null)

Cc: <stable@vger.kernel.org> # v4.15+
Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomtd: docg3: don't set conflicting BCH_CONST_PARAMS option
Arnd Bergmann [Thu, 11 Oct 2018 11:06:16 +0000 (13:06 +0200)]
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option

commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream.

I noticed during the creation of another bugfix that the BCH_CONST_PARAMS
option that is set by DOCG3 breaks setting variable parameters for any
other users of the BCH library code.

The only other user we have today is the MTD_NAND software BCH
implementation (most flash controllers use hardware BCH these days
and are not affected). I considered removing BCH_CONST_PARAMS entirely
because of the inherent conflict, but according to the description in
lib/bch.c there is a significant performance benefit in keeping it.

To avoid the immediate problem of the conflict between MTD_NAND_BCH
and DOCG3, this only sets the constant parameters if MTD_NAND_BCH
is disabled, which should fix the problem for all cases that
are affected. This should also work for all stable kernels.

Note that there is only one machine that actually seems to use the
DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have
the driver disabled, but it almost certainly shows up if we wanted
to test random kernels on machines that use software BCH in MTD.

Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code")
Cc: stable@vger.kernel.org
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomtd: nand: Fix nanddev_neraseblocks()
Boris Brezillon [Sun, 28 Oct 2018 11:29:55 +0000 (12:29 +0100)]
mtd: nand: Fix nanddev_neraseblocks()

commit d098093ba06eb032057d1aca1c2e45889e099d00 upstream.

nanddev_neraseblocks() currently returns the number pages per LUN
instead of the total number of eraseblocks.

Fixes: 9c3736a3de21 ("mtd: nand: Add core infrastructure to deal with NAND devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()
Christophe JAILLET [Tue, 16 Oct 2018 07:13:46 +0000 (09:13 +0200)]
mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()

commit 91d7b67000c6e9bd605624079fee5a084238ad92 upstream.

We return 0 unconditionally in 'cqspi_direct_read_execute()'.
However, 'ret' is set to some error codes in several error handling
paths.

Return 'ret' instead to propagate the error code.

Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agobonding/802.3ad: fix link_failure_count tracking
Jarod Wilson [Sun, 4 Nov 2018 19:59:46 +0000 (14:59 -0500)]
bonding/802.3ad: fix link_failure_count tracking

commit ea53abfab960909d622ca37bcfb8e1c5378d21cc upstream.

Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to
BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values
were read, to fix a problem with slaves getting into weird states, but
in the process, broke tracking of link failures, as going straight to
BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted)
means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because
!link_state was already true, we never incremented commit, and never got
a chance to call bond_miimon_commit(), where slave->link_failure_count
would be incremented. I believe the simple fix here is to mark the slave
as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from
_FAIL to either _UP or _DOWN, and in the latter case, we now get proper
incrementing of link_failure_count again.

Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event")
CC: Mahesh Bandewar <maheshb@google.com>
CC: David S. Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>