package metrics;
-// Next tag: 19
+// Next tag: 20
message SystemProfileProto {
// The time when the client was compiled/linked, in seconds since the epoch.
optional int64 build_timestamp = 1;
}
repeated FieldTrial field_trial = 9;
+ // Information about the A/V output device(s) (typically just a TV).
+ // However, a configuration may have one or more intermediate A/V devices
+ // between the source device and the TV (e.g. an A/V receiver, video
+ // processor, etc.).
+ message ExternalAudioVideoDevice {
+ // The manufacturer name (possibly encoded as a 3-letter code, e.g. "YMH"
+ // for Yamaha).
+ optional string manufacturer_name = 1;
+
+ // The model name (e.g. "RX-V1900"). Some devices may report generic names
+ // like "receiver" or use the full manufacturer name (e.g "PHILIPS").
+ optional string model_name = 2;
+
+ // The product code (e.g. "0218").
+ optional string product_code = 3;
+
+ // The device types. A single device can have multiple types (e.g. a set-top
+ // box could be both a tuner and a player). The same type may even be
+ // repeated (e.g a device that reports two tuners).
+ enum AVDeviceType {
+ AV_DEVICE_TYPE_UNKNOWN = 0;
+ AV_DEVICE_TYPE_TV = 1;
+ AV_DEVICE_TYPE_RECORDER = 2;
+ AV_DEVICE_TYPE_TUNER = 3;
+ AV_DEVICE_TYPE_PLAYER = 4;
+ AV_DEVICE_TYPE_AUDIO_SYSTEM = 5;
+ }
+ repeated AVDeviceType av_device_type = 4;
+
+ // The year of manufacture.
+ optional int32 manufacture_year = 5;
+
+ // The week of manufacture.
+ // Note: per the Wikipedia EDID article, numbering for this field may not
+ // be consistent between manufacturers.
+ optional int32 manufacture_week = 6;
+
+ // Max horizontal resolution in pixels.
+ optional int32 horizontal_resolution = 7;
+
+ // Max vertical resolution in pixels.
+ optional int32 vertical_resolution = 8;
+
+ // Audio capabilities of the device.
+ // Ref: http://en.wikipedia.org/wiki/Extended_display_identification_data
+ message AudioDescription {
+ // Audio format
+ enum AudioFormat {
+ AUDIO_FORMAT_UNKNOWN = 0;
+ AUDIO_FORMAT_LPCM = 1;
+ AUDIO_FORMAT_AC_3 = 2;
+ AUDIO_FORMAT_MPEG1 = 3;
+ AUDIO_FORMAT_MP3 = 4;
+ AUDIO_FORMAT_MPEG2 = 5;
+ AUDIO_FORMAT_AAC = 6;
+ AUDIO_FORMAT_DTS = 7;
+ AUDIO_FORMAT_ATRAC = 8;
+ AUDIO_FORMAT_ONE_BIT = 9;
+ AUDIO_FORMAT_DD_PLUS = 10;
+ AUDIO_FORMAT_DTS_HD = 11;
+ AUDIO_FORMAT_MLP_DOLBY_TRUEHD = 12;
+ AUDIO_FORMAT_DST_AUDIO = 13;
+ AUDIO_FORMAT_MICROSOFT_WMA_PRO = 14;
+ }
+ optional AudioFormat audio_format = 1;
+
+ // Number of channels (e.g. 1, 2, 8, etc.).
+ optional int32 num_channels = 2;
+
+ // Supported sample frequencies in Hz (e.g. 32000, 44100, etc.).
+ // Multiple frequencies may be specified.
+ repeated int32 sample_frequency_hz = 3;
+
+ // Maximum bit rate in bits/s.
+ optional int32 max_bit_rate_per_second = 4;
+
+ // Bit depth (e.g. 16, 20, 24, etc.).
+ optional int32 bit_depth = 5;
+ }
+ repeated AudioDescription audio_description = 9;
+
+ // The position in AV setup.
+ // A value of 0 means this device is the TV.
+ // A value of 1 means this device is directly connected to one of
+ // the TV's inputs.
+ // Values > 1 indicate there are 1 or more devices between this device
+ // and the TV.
+ optional int32 position_in_setup = 10;
+
+ // Whether this device is in the path to the TV.
+ optional bool is_in_path_to_tv = 11;
+
+ // The CEC version the device supports.
+ // CEC stands for Consumer Electronics Control, a part of the HDMI
+ // specification. Not all HDMI devices support CEC.
+ // Only devices that support CEC will report a value here.
+ optional int32 cec_version = 12;
+
+ // This message reports CEC commands seen by a device.
+ // After each log is sent, this information is cleared and gathered again.
+ // By collecting CEC status information by opcode we can determine
+ // which CEC features can be supported.
+ message CECCommand {
+ // The CEC command opcode. CEC supports up to 256 opcodes.
+ // We add only one CECCommand message per unique opcode. Only opcodes
+ // seen by the device will be reported. The remainder of the message
+ // accumulates status for this opcode (and device).
+ optional int32 opcode = 1;
+
+ // The total number of commands received from the external device.
+ optional int32 num_received_direct = 2;
+
+ // The number of commands received from the external device as part of a
+ // broadcast message.
+ optional int32 num_received_broadcast = 3;
+
+ // The total number of commands sent to the external device.
+ optional int32 num_sent_direct = 4;
+
+ // The number of commands sent to the external device as part of a
+ // broadcast message.
+ optional int32 num_sent_broadcast = 5;
+
+ // The number of aborted commands for unknown reasons.
+ optional int32 num_aborted_unknown_reason = 6;
+
+ // The number of aborted commands because of an unrecognized opcode.
+ optional int32 num_aborted_unrecognized = 7;
+ }
+ repeated CECCommand cec_command = 13;
+ }
+ repeated ExternalAudioVideoDevice external_audio_video_device = 14;
+
+ // Information about the current wireless access point. Collected directly
+ // from the wireless access point via standard apis if the device is
+ // connected to the Internet wirelessly. Introduced for Chrome on TV devices
+ // but also can be collected by ChromeOS, Android or other clients.
+ message ExternalAccessPoint {
+ // The manufacturer name, for example "ASUSTeK Computer Inc.".
+ optional string manufacturer = 1;
+
+ // The model name, for example "Wi-Fi Protected Setup Router".
+ optional string model_name = 2;
+
+ // The model number, for example "RT-N16".
+ optional string model_number = 3;
+
+ // The device name (sometime same as model_number), for example "RT-N16".
+ optional string device_name = 4;
+ }
+ optional ExternalAccessPoint external_access_point = 15;
+
// Number of users currently signed into a multiprofile session.
// A zero value indicates that the user count changed while the log is open.
// Logged only on ChromeOS.
// extensions. If multiple extensions map to the same bucket, that bucket is
// still only reported once.
repeated int32 occupied_extension_bucket = 18;
+
+ // The state of loaded extensions for this system. The system can have either
+ // no applicable extensions, extensions only from the webstore and verified by
+ // the webstore, extensions only from the webstore but not verified, or
+ // extensions not from the store. If there is a single off-store extension,
+ // then HAS_OFFSTORE is reported. This should be kept in sync with the
+ // corresponding enum in chrome/browser/metrics/extensions_metrics_provider.cc
+ enum ExtensionsState {
+ NO_EXTENSIONS = 0;
+ NO_OFFSTORE_VERIFIED = 1;
+ NO_OFFSTORE_UNVERIFIED = 2;
+ HAS_OFFSTORE = 3;
+ }
+ optional ExtensionsState offstore_extensions_state = 19;
}
projects / platform / framework / web / crosswalk.git / blobdiff