/*
- * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2020 Samsung Electronics Co., Ltd.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
#include <dali-toolkit-test-suite-utils.h>
#include <dali-toolkit/dali-toolkit.h>
#include <dali/integration-api/events/touch-event-integ.h>
-#include <dali/integration-api/events/pan-gesture-event.h>
+#include <dali/integration-api/events/wheel-event-integ.h>
using namespace Dali;
using namespace Toolkit;
gObjectCreatedCallBackCalled = true;
}
+struct CallbackFunctor
+{
+ CallbackFunctor(bool* callbackFlag)
+ : mCallbackFlag( callbackFlag )
+ {
+ }
+
+ void operator()()
+ {
+ *mCallbackFlag = true;
+ }
+ bool* mCallbackFlag;
+};
-const int MILLISECONDS_PER_SECOND = 1000;
const int RENDER_FRAME_INTERVAL = 16; ///< Duration of each frame in ms. (at approx 60FPS)
-const int RENDER_ANIMATION_TEST_DURATION_MS = 1000; ///< 1000ms to test animation
+
const int RENDER_DELAY_SCROLL = 1000; ///< duration to wait for any scroll to complete.
// For Clamp Signal testing...
const float CLAMP_EXCESS_WIDTH = 200.0f; ///< Amount of width that can be panned outside scrollview
const float CLAMP_EXCESS_HEIGHT = 200.0f; ///< Amount of height that can be panned outside scrollview
-const int CLAMP_STEP_0_CHECK_NOTCLAMPED = 0; ///< FSM: "First check that scrollview isn't clamped"
-const int CLAMP_STEP_1_CHECK_CLAMPED_WEST = 1; ///< FSM: "Next check that scrollview clamps against left side"
-const int CLAMP_STEP_2_CHECK_CLAMPED_SOUTH_WEST = 2; ///< FSM: "Then check that scrollview clamps against bottom-left side"
-const int CLAMP_STEP_3_SUCCESS = 3; ///< FSM: "Finished (Success)"
const Vector2 CLAMP_START_SCROLL_POSITION(30.0f, 100.0f); ///< Scroll start position for the Clamping tests.
const Vector2 CLAMP_TOUCH_START( 100.0f, 100.0f ); ///< Start point to touch from for the Clamping tests.
const Vector2 CLAMP_TOUCH_MOVEMENT( 5.0f, -5.0f ); ///< Amount to move touch for each frame for the Clamping tests.
const int CLAMP_GESTURE_FRAMES = 100; ///< Number of Frames to synthesize a gesture for the Clamping tests.
const Vector3 TEST_ACTOR_POSITION(100.0f, 100.0f, 0.0f); ///< A Test actor position offset (arbitrary value)
const Vector3 TEST_CONSTRAINT_OFFSET(1.0f, 2.0f, 0.0f); ///< A Test constraint offset (arbitrary value to test effects)
-const float TEST_RATIO_TOLERANCE = 0.05; ///< +/-5% tolerance for ratio comparisons.
const float DEFAULT_SNAP_OVERSHOOT_DURATION(0.5f); ///< Default overshoot snapping animation time.
const float DEFAULT_MAX_OVERSHOOT(100.0f); ///< Default maximum allowed overshoot in pixels
const float TIME_TOLERANCE = 0.05f; ///< Allow testing tolerance between a 10th of second (+/- 3 frames)
-// Generate a PanGestureEvent to send to Core
-Integration::PanGestureEvent GeneratePan(
- Gesture::State state,
- const Vector2& previousPosition,
- const Vector2& currentPosition,
- unsigned long timeDelta,
- unsigned int numberOfTouches = 1)
-{
- Integration::PanGestureEvent pan(state);
-
- pan.previousPosition = previousPosition;
- pan.currentPosition = currentPosition;
- pan.timeDelta = timeDelta;
- pan.numberOfTouches = numberOfTouches;
-
- return pan;
-}
-
-/**
- * Helper to generate PanGestureEvent
- *
- * @param[in] application Application instance
- * @param[in] state The Gesture State
- * @param[in] pos The current position of touch.
- */
-static void SendPan(ToolkitTestApplication& application, Gesture::State state, const Vector2& pos)
-{
- static Vector2 last;
-
- if( (state == Gesture::Started) ||
- (state == Gesture::Possible) )
- {
- last.x = pos.x;
- last.y = pos.y;
- }
-
- application.ProcessEvent(GeneratePan(state, last, pos, RENDER_FRAME_INTERVAL));
-
- last.x = pos.x;
- last.y = pos.y;
-}
-
/*
* Simulate time passed by.
*
static bool gOnScrollUpdateCalled; ///< Whether the OnScrollUpdate signal was invoked.
static bool gOnScrollCompleteCalled; ///< Whether the OnScrollComplete signal was invoked.
static bool gOnSnapStartCalled; ///< Whether the OnSnapStart signal was invoked.
+static bool gOnWheelEventCalled; ///< Whether the WheelEventSignal signal was invoked.
static SnapType gLastSnapType; ///< Snaping information from SnapEvent.
static Vector3 gConstraintResult; ///< Result from constraint.
}
/**
+ * Invoked after a wheel-event is received
+ *
+ * @param[in] actor The owing actor
+ * @param[in] event The wheel event
+ * @return True if the event should be consumed
+ */
+static bool OnWheelEvent( Actor actor, const Dali::WheelEvent& wheelEvent )
+{
+ gOnWheelEventCalled = true;
+ return false;
+}
+
+/**
* TestSumConstraint
*
* Summation of current value, property, and offset.
int timeToReachOrigin = -1;
for(int i = 0;i<MAX_FRAMES_TO_TEST_OVERSHOOT;i++)
{
- float overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- float overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
+ float overshootXValue = scrollView.GetCurrentProperty<float>( ScrollView::Property::OVERSHOOT_X );
+ float overshootYValue = scrollView.GetCurrentProperty<float>( ScrollView::Property::OVERSHOOT_Y );
if(overshootXValue == 0.0f && overshootYValue == 0.0f)
{
break;
return std::min( progress * 2.0f, 1.0f );
}
+/**
+ * Generate a complete pan gesture
+ * Note: To initiate the gesture it will go from start, diagonally SE on the screen, then continue in the direction for frames touches
+ */
+static Vector2 PerformGestureSwipe(ToolkitTestApplication& application, Vector2 start, Vector2 direction, int frames, uint32_t& time, bool finish = true)
+{
+ gOnScrollStartCalled = false;
+ gOnScrollUpdateCalled = false;
+ gOnScrollCompleteCalled = false;
+ gOnSnapStartCalled = false;
+
+ Vector2 pos( start );
+
+ // This is created to ensure a pan is started
+ Vector2 pos_start_jump( start + Vector2(11.0f, 11.0f) );
+ TestStartPan( application, start, pos_start_jump, time );
+ pos = pos_start_jump;
+
+ Wait(application);
+
+ for(int i = 0;i<frames;i++)
+ {
+ pos += direction; // Move in this direction
+ TestMovePan(application, pos, time );
+ time += Wait(application);
+ }
+
+ if(finish)
+ {
+ pos += direction; // Move in this direction.
+ TestEndPan(application, pos, time );
+ time += Wait(application, RENDER_DELAY_SCROLL);
+ }
+
+ return pos;
+}
+
+
} // unnamed namespace
END_TEST;
}
+int UtcDaliScrollViewMoveConstructor(void)
+{
+ ToolkitTestApplication application;
+
+ ScrollView scrollView = ScrollView::New();
+ DALI_TEST_EQUALS( 1, scrollView.GetBaseObject().ReferenceCount(), TEST_LOCATION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_POSITION, Vector2(10.0f, 10.0f) );
+ DALI_TEST_EQUALS( scrollView.GetProperty<Vector2>( ScrollView::Property::SCROLL_POSITION ), Vector2(10.0f, 10.0f), TEST_LOCATION );
+
+ ScrollView moved = std::move( scrollView );
+ DALI_TEST_CHECK( moved );
+ DALI_TEST_EQUALS( 1, moved.GetBaseObject().ReferenceCount(), TEST_LOCATION );
+ DALI_TEST_EQUALS( moved.GetProperty<Vector2>( ScrollView::Property::SCROLL_POSITION ), Vector2(10.0f, 10.0f), TEST_LOCATION );
+ DALI_TEST_CHECK( !scrollView );
+
+ END_TEST;
+}
+
int UtcDaliToolkitScrollViewAssignmentOperatorP(void)
{
ToolkitTestApplication application;
ScrollView scrollView = ScrollView::New();
scrollView.SetProperty( ScrollView::Property::SCROLL_POSITION, Vector2(10.0f, 10.0f) );
- ScrollView copy = scrollView;
+ ScrollView copy;
+ copy = scrollView;
DALI_TEST_CHECK( copy );
DALI_TEST_CHECK( copy.GetProperty<Vector2>( ScrollView::Property::SCROLL_POSITION ) == scrollView.GetProperty<Vector2>( ScrollView::Property::SCROLL_POSITION ) );
END_TEST;
}
+int UtcDaliScrollViewMoveAssignment(void)
+{
+ ToolkitTestApplication application;
+
+ ScrollView scrollView = ScrollView::New();
+ DALI_TEST_EQUALS( 1, scrollView.GetBaseObject().ReferenceCount(), TEST_LOCATION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_POSITION, Vector2(10.0f, 10.0f) );
+ DALI_TEST_EQUALS( scrollView.GetProperty<Vector2>( ScrollView::Property::SCROLL_POSITION ), Vector2(10.0f, 10.0f), TEST_LOCATION );
+
+ ScrollView moved;
+ moved = std::move( scrollView );
+ DALI_TEST_CHECK( moved );
+ DALI_TEST_EQUALS( 1, moved.GetBaseObject().ReferenceCount(), TEST_LOCATION );
+ DALI_TEST_EQUALS( moved.GetProperty<Vector2>( ScrollView::Property::SCROLL_POSITION ), Vector2(10.0f, 10.0f), TEST_LOCATION );
+ DALI_TEST_CHECK( !scrollView );
+
+ END_TEST;
+}
+
int UtcDaliScrollViewDestructorP(void)
{
ToolkitTestApplication application;
END_TEST;
}
-int UtcDaliToolkitScrollViewNewP(void)
+int UtcDaliToolkitScrollViewNewP1(void)
{
ToolkitTestApplication application;
- tet_infoline(" UtcDaliToolkitScrollViewNewP");
+ tet_infoline(" UtcDaliToolkitScrollViewNewP1");
ScrollView scrollView;
DALI_TEST_CHECK( scrollView2 == scrollView );
//Additional check to ensure object is created by checking if it's registered
- ObjectRegistry registry = Stage::GetCurrent().GetObjectRegistry();
+ ObjectRegistry registry = application.GetCore().GetObjectRegistry();
DALI_TEST_CHECK( registry );
gObjectCreatedCallBackCalled = false;
END_TEST;
}
+int UtcDaliToolkitScrollViewNewP2(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline(" UtcDaliToolkitScrollViewNewP2 - create thru type registry");
+
+ ScrollView scrollView;
+ DALI_TEST_CHECK( !scrollView );
+
+ TypeRegistry typeRegistry = TypeRegistry::Get();
+ TypeInfo scrollViewType = typeRegistry.GetTypeInfo("ScrollView");
+ BaseHandle handle = scrollViewType.CreateInstance();
+ DALI_TEST_CHECK( handle );
+
+ scrollView = ScrollView::DownCast(handle);
+ DALI_TEST_CHECK( scrollView );
+
+ END_TEST;
+}
+
int UtcDaliToolkitScrollViewDownCastP(void)
{
ToolkitTestApplication application;
// Create the ScrollView actor
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
const Vector2 target = Vector2(100.0f, 200.0f);
const Vector2 target2 = Vector2(300.0f, 100.0f);
tet_infoline(" UtcDaliToolkitScrollViewScrollToPositionWithDirectionBiasP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 200.0f, true) );
RulerPtr rulerY = new FixedRuler( 100.0f );
scrollView.SetWrapMode(true);
+ Property::Value wrapMode = scrollView.GetProperty( Toolkit::ScrollView::Property::WRAP_ENABLED );
+ DALI_TEST_EQUALS( wrapMode.Get<bool>(), true, TEST_LOCATION );
+
const Vector2 target = Vector2(50.0f, 50.0f);
const Vector2 target2 = Vector2(150.0f, 150.0f);
scrollView.ScrollTo( target2, 0.25f, Dali::Toolkit::DirectionBiasLeft, Dali::Toolkit::DirectionBiasLeft );
Wait(application, RENDER_DELAY_SCROLL);
- DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), Vector2::ZERO, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), target2, TEST_LOCATION );
scrollView.ScrollTo( target, 0.0f );
Wait(application, RENDER_DELAY_SCROLL);
// Create the ScrollView actor
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
const Vector2 target = Vector2(100.0f, 200.0f);
const Vector2 target2 = Vector2(300.0f, 100.0f);
tet_infoline(" UtcDaliToolkitScrollViewScrollToPositionWithAlphaFunctionAndDirectionBiasP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 200.0f, true) );
RulerPtr rulerY = new FixedRuler( 100.0f );
scrollView.ScrollTo( target2, 0.25f, AlphaFunction::LINEAR, Dali::Toolkit::DirectionBiasLeft, Dali::Toolkit::DirectionBiasLeft );
Wait(application, RENDER_DELAY_SCROLL);
- DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), Vector2::ZERO, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), target2, TEST_LOCATION );
scrollView.ScrollTo( target, 0.0f );
Wait(application, RENDER_DELAY_SCROLL);
tet_infoline(" UtcDaliToolkitScrollViewScrollToPageP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 800.0f, true) );
RulerPtr rulerY = new FixedRuler( 100.0f );
END_TEST;
}
+
+int UtcDaliToolkitScrollModeP1(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( " UtcDaliToolkitScrollView ScrollMode property" );
+
+ // Set up a scrollView.
+ ScrollView scrollView = ScrollView::New();
+
+ // Do not rely on stage size for UTC tests.
+ Vector2 viewPageSize( 720.0f, 1280.0f );
+ scrollView.SetResizePolicy( ResizePolicy::FIXED, Dimension::ALL_DIMENSIONS );
+ scrollView.SetProperty( Actor::Property::SIZE, viewPageSize );
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN, ParentOrigin::CENTER );
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT, AnchorPoint::CENTER );
+ scrollView.SetProperty( Actor::Property::POSITION, Vector3( 0.0f, 0.0f, 0.0f ));
+
+ // Position rulers.
+ Property::Map rulerMap;
+ rulerMap.Add( ScrollMode::X_AXIS_SCROLL_ENABLED, true );
+ rulerMap.Add( ScrollMode::X_AXIS_SNAP_TO_INTERVAL, viewPageSize.width );
+ rulerMap.Add( ScrollMode::X_AXIS_SCROLL_BOUNDARY, viewPageSize.width*3 );
+ rulerMap.Add( ScrollMode::Y_AXIS_SCROLL_ENABLED, false );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_MODE, rulerMap);
+
+ scrollView.SetWrapMode( false );
+ scrollView.SetScrollSensitive( true );
+
+ application.GetScene().Add( scrollView );
+
+ // Set up a gesture to perform.
+ Vector2 startPos( 50.0f, 0.0f );
+ Vector2 direction( -5.0f, 0.0f );
+ int frames = 200;
+ uint32_t time = 0;
+
+ // Force starting position.
+ scrollView.ScrollTo( startPos, 0.0f );
+ time += Wait( application );
+
+ // Deliberately skip the "Finished" part of the gesture, so we can read the coordinates before the snap begins.
+ Vector2 currentPos( PerformGestureSwipe( application, startPos, direction, frames - 1, time, false ) );
+
+ // Confirm the final X coord has not moved more than one page from the start X position.
+ DALI_TEST_GREATER( ( startPos.x + viewPageSize.width ), scrollView.GetCurrentScrollPosition().x, TEST_LOCATION );
+
+ // Finish the gesture and wait for the snap.
+ currentPos += direction;
+ TestEndPan( application, currentPos, time );
+ // We add RENDER_FRAME_INTERVAL on to wait for an extra frame (for the last "finished" gesture to complete first.
+ time += Wait( application, RENDER_DELAY_SCROLL + RENDER_FRAME_INTERVAL );
+
+ // Confirm the final X coord has snapped to exactly one page ahead of the start page.
+ DALI_TEST_EQUALS( viewPageSize.width, scrollView.GetCurrentScrollPosition().x, Math::MACHINE_EPSILON_0, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliToolkitScrollModeP2(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( " UtcDaliToolkitScrollView ScrollMode property" );
+
+ // Set up a scrollView.
+ ScrollView scrollView = ScrollView::New();
+
+ // Do not rely on stage size for UTC tests.
+ Vector2 viewPageSize( 720.0f, 1280.0f );
+ scrollView.SetResizePolicy( ResizePolicy::FIXED, Dimension::ALL_DIMENSIONS );
+ scrollView.SetProperty( Actor::Property::SIZE, viewPageSize );
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN, ParentOrigin::CENTER );
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT, AnchorPoint::CENTER );
+ scrollView.SetProperty( Actor::Property::POSITION, Vector3( 0.0f, 0.0f, 0.0f ));
+
+ // Position rulers.
+ Property::Map rulerMap;
+ rulerMap.Add( ScrollMode::X_AXIS_SCROLL_ENABLED, false );
+ rulerMap.Add( ScrollMode::Y_AXIS_SCROLL_ENABLED, true );
+ rulerMap.Add( ScrollMode::Y_AXIS_SNAP_TO_INTERVAL, viewPageSize.height );
+ rulerMap.Add( ScrollMode::Y_AXIS_SCROLL_BOUNDARY, viewPageSize.height*3 );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_MODE, rulerMap);
+
+ scrollView.SetWrapMode( false );
+ scrollView.SetScrollSensitive( true );
+
+ application.GetScene().Add( scrollView );
+
+ // Set up a gesture to perform.
+ Vector2 startPos( 0.0f, 50.0f );
+ Vector2 direction( 0.0f, -6.0f );
+ int frames = 200;
+ uint32_t time = 0;
+
+ // Force starting position.
+ scrollView.ScrollTo( startPos, 0.0f );
+ time += Wait( application );
+
+ // Deliberately skip the "Finished" part of the gesture, so we can read the coordinates before the snap begins.
+ Vector2 currentPos( PerformGestureSwipe( application, startPos, direction, frames - 1, time, false ) );
+
+ // Confirm the final X coord has not moved more than one page from the start X position.
+ DALI_TEST_GREATER( ( startPos.y + viewPageSize.height ), scrollView.GetCurrentScrollPosition().y, TEST_LOCATION );
+
+ // Finish the gesture and wait for the snap.
+ currentPos += direction;
+ time += Wait( application );
+ TestEndPan( application, currentPos, time );
+ // We add RENDER_FRAME_INTERVAL on to wait for an extra frame (for the last "finished" gesture to complete first.
+ Wait( application, RENDER_DELAY_SCROLL + RENDER_FRAME_INTERVAL );
+
+ // Confirm the final Y coord has snapped to exactly one page ahead of the start page.
+ DALI_TEST_EQUALS( viewPageSize.height, scrollView.GetCurrentScrollPosition().y, Math::MACHINE_EPSILON_0, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliToolkitScrollModeP3(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( " UtcDaliToolkitScrollView ScrollMode property" );
+
+ // Set up a scrollView.
+ ScrollView scrollView = ScrollView::New();
+
+ // Do not rely on stage size for UTC tests.
+ Vector2 viewPageSize( 720.0f, 1280.0f );
+ scrollView.SetResizePolicy( ResizePolicy::FIXED, Dimension::ALL_DIMENSIONS );
+ scrollView.SetProperty( Actor::Property::SIZE, viewPageSize );
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN, ParentOrigin::CENTER );
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT, AnchorPoint::CENTER );
+ scrollView.SetProperty( Actor::Property::POSITION, Vector3( 0.0f, 0.0f, 0.0f ));
+
+ // Position rulers.
+ Property::Map rulerMap;
+ rulerMap.Add( ScrollMode::X_AXIS_SCROLL_ENABLED, false );
+ rulerMap.Add( ScrollMode::Y_AXIS_SCROLL_ENABLED, true );
+ rulerMap.Add( ScrollMode::Y_AXIS_SNAP_TO_INTERVAL, viewPageSize.height );
+ rulerMap.Add( ScrollMode::Y_AXIS_SCROLL_BOUNDARY, viewPageSize.height*3 );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_MODE, rulerMap);
+
+ scrollView.SetWrapMode( false );
+ scrollView.SetScrollSensitive( true );
+
+ application.GetScene().Add( scrollView );
+
+ // Set up a gesture to perform.
+ Vector2 startPos( 0.0f, 50.0f );
+ Vector2 direction( 0.0f, -6.0f );
+ int frames = 200;
+ uint32_t time = 0;
+
+ // Force starting position.
+ scrollView.ScrollTo( startPos, 0.0f );
+ time += Wait( application );
+
+ // Deliberately skip the "Finished" part of the gesture, so we can read the coordinates before the snap begins.
+ Vector2 currentPos( PerformGestureSwipe( application, startPos, direction, frames - 1, time, false ) );
+
+ // Confirm the final X coord has not moved more than one page from the start X position.
+ DALI_TEST_GREATER( ( startPos.y + viewPageSize.height ), scrollView.GetCurrentScrollPosition().y, TEST_LOCATION );
+
+ // Finish the gesture and wait for the snap.
+ currentPos += direction;
+ TestEndPan( application, currentPos, time );
+ // We add RENDER_FRAME_INTERVAL on to wait for an extra frame (for the last "finished" gesture to complete first.
+ Wait( application, RENDER_DELAY_SCROLL + RENDER_FRAME_INTERVAL );
+
+ // Confirm the final Y coord has snapped to exactly one page ahead of the start page.
+ DALI_TEST_EQUALS( viewPageSize.height, scrollView.GetCurrentScrollPosition().y, Math::MACHINE_EPSILON_0, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliToolkitScrollModeP4(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( " UtcDaliToolkitScrollView ScrollMode property, DefaultRulers" );
+
+ // Set up a scrollView.
+ ScrollView scrollView = ScrollView::New();
+
+ // Do not rely on stage size for UTC tests.
+ Vector2 viewPageSize( 720.0f, 1280.0f );
+ scrollView.SetResizePolicy( ResizePolicy::FIXED, Dimension::ALL_DIMENSIONS );
+ scrollView.SetProperty( Actor::Property::SIZE, viewPageSize );
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN, ParentOrigin::TOP_LEFT );
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT, AnchorPoint::TOP_LEFT );
+ scrollView.SetProperty( Actor::Property::POSITION, Vector3( 0.0f, 0.0f, 0.0f ));
+
+ // Position rulers - expect Default rulers to be used which don't snap
+ Property::Map rulerMap;
+ rulerMap.Add( ScrollMode::X_AXIS_SCROLL_ENABLED, true );
+ rulerMap.Add( ScrollMode::Y_AXIS_SCROLL_ENABLED, true );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_MODE, rulerMap);
+
+ scrollView.SetWrapMode( false );
+ scrollView.SetScrollSensitive( true );
+
+ application.GetScene().Add( scrollView );
+
+ Vector2 START_POSITION = Vector2(10.0f, 10.0f);
+
+ uint32_t time = 0;
+ scrollView.ScrollTo(START_POSITION, 0.0f);
+ time += Wait(application);
+
+ // Try a vertical swipe.
+ // PerformGestureSwipe not used as a different initial direction was required
+ Vector2 pos( START_POSITION + Vector2(0.0f, 15.0f) );
+ Vector2 dir( 0.0f, 1.0f );
+
+ TestStartPan( application, START_POSITION, pos, time );
+
+ Wait(application);
+
+ for( int i = 0; i<45; i++ )
+ {
+ pos += dir;
+ TestMovePan( application, pos, time );
+ time += Wait( application );
+ }
+
+ pos += dir;
+
+ TestEndPan( application, pos, time );
+ Wait( application, RENDER_DELAY_SCROLL );
+
+ // Take into account resampling done when prediction is off.
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition() - Vector2(0.0f, 0.5f), Vector2(10.0f, -50.0f), 0.25f, TEST_LOCATION );
+
+ END_TEST;
+}
+
int UtcDaliToolkitScrollViewScrollToPageWithDirectionBiasP(void)
{
ToolkitTestApplication application;
tet_infoline(" UtcDaliToolkitScrollViewScrollToPageWithDirectionBiasP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 200.0f, true) );
RulerPtr rulerY = new FixedRuler( 100.0f );
tet_infoline(" UtcDaliToolkitScrollViewScrollToActorP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
Actor actorA = Actor::New();
const Vector3 positionA = Vector3(100.0f, 400.0f, 0.0f);
- actorA.SetPosition(positionA);
+ actorA.SetProperty( Actor::Property::POSITION, positionA );
scrollView.Add(actorA);
Actor actorB = Actor::New();
const Vector3 positionB = Vector3(500.0f, 200.0f, 0.0f);
- actorB.SetPosition(positionB);
+ actorB.SetProperty( Actor::Property::POSITION, positionB );
scrollView.Add(actorB);
Wait(application);
tet_infoline(" UtcDaliToolkitScrollViewScrollToSnapPointP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 800.0f, true) );
RulerPtr rulerY = new FixedRuler( 100.0f );
tet_infoline(" UtcDaliToolkitScrollViewSetWrapModeP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
+
+ Actor actor = Actor::New();
+ scrollView.Add( actor );
// Position rulers. 4x4 grid.
RulerPtr rulerX = new FixedRuler(50.0f);
scrollView.ScrollTo(Vector2(225.0f, 125.0f), 0.0f); // 5th (1st) page across, and 3rd (3rd) page down. (wrapped)
Wait(application);
DALI_TEST_EQUALS( static_cast<int>(scrollView.GetCurrentPage()), 17, TEST_LOCATION );
+
scrollView.SetWrapMode(true);
+ scrollView.ScrollTo(Vector2(230.0f, 130.0f), 0.0f); // 5th (1st) page across, and 3rd (3rd) page down. (wrapped)
+ Wait(application);
DALI_TEST_EQUALS( static_cast<int>(scrollView.GetCurrentPage()), 13, TEST_LOCATION );
END_TEST;
}
tet_infoline(" UtcDaliToolkitScrollViewActorAutoSnap");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
const Vector3 aPosition = Vector3(200.0f, 50.0f, 0.0f);
Actor a = Actor::New();
scrollView.Add(a);
- a.SetPosition(aPosition);
+ a.SetProperty( Actor::Property::POSITION, aPosition );
const Vector3 bPosition = Vector3(600.0f, 600.0f, 0.0f);
Actor b = Actor::New();
scrollView.Add(b);
- b.SetPosition(bPosition);
+ b.SetProperty( Actor::Property::POSITION, bPosition );
// Goto a random position, and execute snap (should not move)
Vector2 targetScroll = Vector2(500.0f, 500.0f);
gOnScrollCompleteCalled = false;
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
END_TEST;
}
-int UtcDaliToolkitScrollViewSignalsUpdate(void)
+int UtcDaliToolkitScrollViewSignalsUpdate01(void)
{
ToolkitTestApplication application;
tet_infoline(" UtcDaliToolkitScrollViewSignalsUpdate");
gOnScrollCompleteCalled = false;
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
scrollView.ScrollUpdatedSignal().Connect( &OnScrollUpdate );
scrollView.ScrollCompletedSignal().Connect( &OnScrollComplete );
- ImageActor image = CreateSolidColorActor( Color::RED );
- image.SetSize(stageSize);
- image.SetParentOrigin(ParentOrigin::TOP_LEFT);
- image.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ Actor image = Actor::New();
+ image.SetProperty( Actor::Property::SIZE, stageSize);
+ image.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ image.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
scrollView.Add(image);
Wait(application);
// Do a pan starting from 100,100 and moving down diagonally.
Vector2 pos(100.0f, 100.0f);
- SendPan(application, Gesture::Possible, pos);
- SendPan(application, Gesture::Started, pos);
+ uint32_t time = 100;
+ TestStartPan( application, pos, pos, time );
pos.x += 5.0f;
pos.y += 5.0f;
Wait(application, 100);
for(int i = 0;i<20;i++)
{
- SendPan(application, Gesture::Continuing, pos);
+ time += RENDER_FRAME_INTERVAL;
+ TestMovePan( application, pos, time);
pos.x += 5.0f;
pos.y += 5.0f;
Wait(application);
}
- SendPan(application, Gesture::Finished, pos);
+ time += RENDER_FRAME_INTERVAL;
+ TestEndPan(application, pos, time );
Wait(application, RENDER_DELAY_SCROLL);
DALI_TEST_CHECK(gOnScrollStartCalled);
END_TEST;
}
-static Vector2 PerformGestureDiagonalSwipe(ToolkitTestApplication& application, Vector2 start, Vector2 direction, int frames, bool finish = true)
+int UtcDaliToolkitScrollViewSignalsUpdate02(void)
{
+ ToolkitTestApplication application;
+ tet_infoline(" UtcDaliToolkitScrollViewSignalsUpdate");
+
gOnScrollStartCalled = false;
gOnScrollUpdateCalled = false;
gOnScrollCompleteCalled = false;
- gOnSnapStartCalled = false;
- // Now do a pan starting from (start) and heading (direction)
- Vector2 pos(start);
- SendPan(application, Gesture::Possible, pos);
- SendPan(application, Gesture::Started, pos);
+ ScrollView scrollView = ScrollView::New();
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
+
+ // Position rulers.
+ RulerPtr rulerX = new DefaultRuler();
+ RulerPtr rulerY = new DefaultRuler();
+ rulerX->SetDomain( RulerDomain(0.0f, 1000.0f, false) );
+ rulerY->SetDomain( RulerDomain(0.0f, 1000.0f, false) );
+ scrollView.SetRulerX(rulerX);
+ scrollView.SetRulerY(rulerY);
+ Dali::ConnectionTracker tracker;
+ bool scrollStarted=false;
+ bool scrollUpdated=false;
+ bool scrollCompleted=false;
+ DALI_TEST_CHECK(scrollView.ConnectSignal( &tracker, "scrollStarted", CallbackFunctor(&scrollStarted) ));
+ DALI_TEST_CHECK(scrollView.ConnectSignal( &tracker, "scrollUpdated", CallbackFunctor(&scrollUpdated) ));
+ DALI_TEST_CHECK(scrollView.ConnectSignal( &tracker, "scrollCompleted", CallbackFunctor(&scrollCompleted) ));
+
+ Actor image = Actor::New();
+ image.SetProperty( Actor::Property::SIZE, stageSize);
+ image.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ image.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
+ scrollView.Add(image);
+
Wait(application);
- for(int i = 0;i<frames;i++)
+ // Do a pan starting from 100,100 and moving down diagonally.
+ Vector2 pos(100.0f, 100.0f);
+ uint32_t time = 100;
+ TestStartPan( application, pos, pos, time );
+ pos.x += 5.0f;
+ pos.y += 5.0f;
+ Wait(application, 100);
+
+ for(int i = 0;i<20;i++)
{
- pos += direction; // Move in this direction
- SendPan(application, Gesture::Continuing, pos);
+ time += RENDER_FRAME_INTERVAL;
+ TestMovePan( application, pos, time);
+ pos.x += 5.0f;
+ pos.y += 5.0f;
Wait(application);
}
- if(finish)
- {
- pos += direction; // Move in this direction.
- SendPan(application, Gesture::Finished, pos);
- Wait(application, RENDER_DELAY_SCROLL);
- }
+ time += RENDER_FRAME_INTERVAL;
+ TestEndPan(application, pos, time );
+ Wait(application, RENDER_DELAY_SCROLL);
- return pos;
+ DALI_TEST_CHECK(scrollStarted);
+ DALI_TEST_CHECK(scrollUpdated);
+ DALI_TEST_CHECK(scrollCompleted);
+
+ application.GetScene().Remove( scrollView );
+
+ END_TEST;
}
int UtcDaliToolkitScrollViewScrollSensitive(void)
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ scrollView.SetOvershootEnabled(true);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
scrollView.SnapStartedSignal().Connect( &OnSnapStart );
scrollView.ScrollTo(CLAMP_START_SCROLL_POSITION, 0.0f); // move in a little.
- Wait(application);
+ uint32_t time = 0;
+ time +=Wait(application);
// First try insensitive swipe.
scrollView.SetScrollSensitive(false);
- PerformGestureDiagonalSwipe(application, CLAMP_TOUCH_START, CLAMP_TOUCH_MOVEMENT, CLAMP_GESTURE_FRAMES, true);
+ PerformGestureSwipe(application, CLAMP_TOUCH_START, CLAMP_TOUCH_MOVEMENT, CLAMP_GESTURE_FRAMES, time, true);
DALI_TEST_CHECK( !gOnScrollStartCalled );
DALI_TEST_CHECK( !gOnScrollCompleteCalled );
// Second try sensitive swipe.
scrollView.SetScrollSensitive(true);
- PerformGestureDiagonalSwipe(application, CLAMP_TOUCH_START, CLAMP_TOUCH_MOVEMENT, CLAMP_GESTURE_FRAMES, true);
+ PerformGestureSwipe(application, CLAMP_TOUCH_START, CLAMP_TOUCH_MOVEMENT, CLAMP_GESTURE_FRAMES, time, true);
DALI_TEST_CHECK( gOnScrollStartCalled );
DALI_TEST_CHECK( gOnScrollCompleteCalled );
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
// Normal
scrollView.ScrollTo(Vector2(100.0f, 100.0f), 0.0f); // move in a little.
- Wait(application);
+ uint32_t time = 0;
+ time += Wait(application);
+
Vector2 startPosition = scrollView.GetCurrentScrollPosition();
- PerformGestureDiagonalSwipe(application, CLAMP_TOUCH_START, Vector2(5.0f, 1.0f), 50, true); // mostly horizontal
+ Vector2 dir(5.0f, 1.0f);
+
+ // PerformGestureSwipe not used as a different initial direction was required
+
+ Vector2 pos( CLAMP_TOUCH_START + Vector2(15.0f, 3.0f) );
+
+ TestStartPan( application, CLAMP_TOUCH_START, pos, time );
+
+ time += Wait(application);
+
+ for( int i = 0; i<47; i++ )
+ {
+ pos += dir;
+ TestMovePan( application, pos, time );
+ time += Wait( application );
+ }
+
+ pos += dir;
+
+ TestEndPan( application, pos, time );
+
const Vector2 positionAfterNormal = scrollView.GetCurrentScrollPosition();
// Autolock
DALI_TEST_CHECK(scrollView.GetAxisAutoLock());
scrollView.ScrollTo(Vector2(100.0f, 100.0f), 0.0f); // move in a little.
- Wait(application);
- PerformGestureDiagonalSwipe(application, CLAMP_TOUCH_START, Vector2(5.0f, 1.0f), 50, true); // mostly horizontal
+ time += Wait(application);
+
+ Vector2 pos2( CLAMP_TOUCH_START + Vector2(15.0f, 3.0f) );
+
+ TestStartPan( application, CLAMP_TOUCH_START, pos2, time );
+
+ time += Wait(application);
+
+ for( int i = 0; i<47; i++ )
+ {
+ pos2 += dir;
+ TestMovePan( application, pos2, time );
+ time += Wait( application );
+ }
+
+ pos2 += dir;
+
+ TestEndPan( application, pos2, time );
+
const Vector2 positionAfterAutoLock = scrollView.GetCurrentScrollPosition();
// compare how much the Y position has deviated for normal and autolock.
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
gConstraintResult = Vector3::ZERO;
Actor a = Actor::New();
scrollView.Add(a);
- a.SetPosition( TEST_ACTOR_POSITION );
+ a.SetProperty( Actor::Property::POSITION, TEST_ACTOR_POSITION);
Wait(application);
Constraint constraint = Constraint::New<Vector3>( scrollView, Actor::Property::POSITION, TestSumConstraint( TEST_CONSTRAINT_OFFSET ) );
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
gConstraintResult = Vector3::ZERO;
Actor a = Actor::New();
scrollView.Add(a);
- a.SetPosition( TEST_ACTOR_POSITION );
+ a.SetProperty( Actor::Property::POSITION, TEST_ACTOR_POSITION);
Wait(application);
// apply this constraint to scrollview
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ scrollView.SetOvershootEnabled(true);
+
+ uint32_t time = 0;
+ Vector2 overshootSize = Vector2(100.0f,100.0f);
+ scrollView.SetProperty( Scrollable::Property::OVERSHOOT_SIZE, overshootSize );
+ DALI_TEST_EQUALS( scrollView.GetProperty(Scrollable::Property::OVERSHOOT_SIZE).Get<Vector2>(), overshootSize, TEST_LOCATION );
+
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
scrollView.ScrollCompletedSignal().Connect( &OnScrollComplete );
scrollView.ScrollTo(OVERSHOOT_START_SCROLL_POSITION, 0.0f); // move in a little.
- Wait(application);
+ time += Wait(application);
// 1. Scroll page in NW (-500,-500 pixels), then inspect overshoot. (don't release touch)
Vector2 currentPos = Vector2(100.0f, 100.0f);
- currentPos = PerformGestureDiagonalSwipe(application, currentPos, Vector2(5.0f, 5.0f), 100, false);
- float overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- float overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
- Vector2 positionValue = scrollView.GetProperty<Vector2>(ScrollView::Property::SCROLL_POSITION);
+ currentPos = PerformGestureSwipe(application, currentPos, Vector2(5.0f, 5.0f), 100, time, false);
+ float overshootXValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_X );
+ float overshootYValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_Y );
+ Vector2 positionValue = scrollView.GetCurrentProperty< Vector2 >( ScrollView::Property::SCROLL_POSITION );
DALI_TEST_EQUALS(overshootXValue, 1.0f, TEST_LOCATION);
DALI_TEST_EQUALS(overshootYValue, 1.0f, TEST_LOCATION);
DALI_TEST_EQUALS(positionValue, Vector2::ZERO, TEST_LOCATION);
float timeToReachOrigin;
// Now release touch. Overshoot should snap back to zero.
- SendPan(application, Gesture::Finished, currentPos);
+ TestEndPan(application, currentPos, time);
+
timeToReachOrigin = TestOvershootSnapDuration(application, scrollView);
float minTimeToReachOrigin = SCROLL_ANIMATION_DURATION + DEFAULT_SNAP_OVERSHOOT_DURATION * (SNAP_POSITION_WITH_DECELERATED_VELOCITY.x / DEFAULT_MAX_OVERSHOOT) - TIME_TOLERANCE;
// 2. Repeat Scroll, but this time change overshoot snap duration to shorter time
scrollView.SetSnapOvershootDuration(TEST_CUSTOM1_SNAP_OVERSHOOT_DURATION);
- currentPos = PerformGestureDiagonalSwipe(application, Vector2(100.0f, 100.0f), Vector2(5.0f, 5.0f), 100, false);
+ currentPos = PerformGestureSwipe(application, Vector2(100.0f, 100.0f), Vector2(5.0f, 5.0f), 100, time, false);
// Now release touch. Overshoot should snap back to zero.
- SendPan(application, Gesture::Finished, currentPos);
+ TestEndPan(application, currentPos, time);
timeToReachOrigin = TestOvershootSnapDuration(application, scrollView);
minTimeToReachOrigin = SCROLL_ANIMATION_DURATION + TEST_CUSTOM1_SNAP_OVERSHOOT_DURATION * (SNAP_POSITION_WITH_DECELERATED_VELOCITY.x / DEFAULT_MAX_OVERSHOOT) - TIME_TOLERANCE;
// 3. Repeat Scroll, but this time change overshoot snap duration to longer time.
scrollView.SetSnapOvershootDuration(TEST_CUSTOM2_SNAP_OVERSHOOT_DURATION);
- currentPos = PerformGestureDiagonalSwipe(application, Vector2(100.0f, 100.0f), Vector2(5.0f, 5.0f), 100, false);
+ currentPos = PerformGestureSwipe(application, Vector2(100.0f, 100.0f), Vector2(5.0f, 5.0f), 100, time, false);
// Now release touch. Overshoot should snap back to zero.
- SendPan(application, Gesture::Finished, currentPos);
+ TestEndPan(application, currentPos, time);
timeToReachOrigin = TestOvershootSnapDuration(application, scrollView);
minTimeToReachOrigin = SCROLL_ANIMATION_DURATION + TEST_CUSTOM2_SNAP_OVERSHOOT_DURATION * (SNAP_POSITION_WITH_DECELERATED_VELOCITY.x / DEFAULT_MAX_OVERSHOOT) - TIME_TOLERANCE;
scrollView.SetSnapOvershootDuration(TEST_CUSTOM3_SNAP_OVERSHOOT_DURATION);
scrollView.SetSnapOvershootAlphaFunction(TestAlphaFunction);
- currentPos = PerformGestureDiagonalSwipe(application, Vector2(100.0f, 100.0f), Vector2(5.0f, 5.0f), 100, false);
+ currentPos = PerformGestureSwipe(application, Vector2(100.0f, 100.0f), Vector2(5.0f, 5.0f), 100, time, false);
// Now release touch. Overshoot should snap back to zero.
- SendPan(application, Gesture::Finished, currentPos);
+ TestEndPan(application, currentPos, time);
timeToReachOrigin = TestOvershootSnapDuration(application, scrollView);
minTimeToReachOrigin = SCROLL_ANIMATION_DURATION + TEST_CUSTOM3_SNAP_OVERSHOOT_DURATION * (SNAP_POSITION_WITH_DECELERATED_VELOCITY.x / DEFAULT_MAX_OVERSHOOT) - TIME_TOLERANCE;
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
scrollView.SnapStartedSignal().Connect( &OnSnapStart );
scrollView.ScrollTo(CLAMP_START_SCROLL_POSITION, 0.0f); // move in a little.
- Wait(application);
+ uint32_t time = 0;
+ time += Wait(application);
// First try a snap.
- PerformGestureDiagonalSwipe(application, CLAMP_TOUCH_START, Vector2(0.5f, 0.0f), 60, true);
+ PerformGestureSwipe(application, CLAMP_TOUCH_START, Vector2(0.5f, 0.0f), 60, time, true);
DALI_TEST_CHECK( gOnSnapStartCalled );
DALI_TEST_CHECK( gLastSnapType == Toolkit::Snap );
// Second try a swipe.
- PerformGestureDiagonalSwipe(application, CLAMP_TOUCH_START, Vector2(20.0f, 0.0f), 60, true);
+ PerformGestureSwipe(application, CLAMP_TOUCH_START, Vector2(20.0f, 0.0f), 60, time, true);
DALI_TEST_CHECK( gOnSnapStartCalled );
DALI_TEST_CHECK( gLastSnapType == Toolkit::Flick );
tet_infoline(" UtcDaliToolkitScrollViewGetCurrentPageP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 800.0f, true) );
RulerPtr rulerY = new FixedRuler( 100.0f );
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
// Position rulers.
RulerPtr rulerX = new DefaultRuler();
scrollView.SetMaxOvershoot(50.0f, 50.0f);
scrollView.ScrollTo(OVERSHOOT_START_SCROLL_POSITION, 0.0f); // move in a little.
- Wait(application);
+ uint32_t time = 0;
+ time += Wait(application);
// Scroll page in NW (-20,-20 pixels), then check that overshoot should be 0. (don't release touch)
- Vector2 currentPos = PerformGestureDiagonalSwipe(application, OVERSHOOT_START_SCROLL_POSITION, Vector2(1.0f, 1.0f), 20, false);
- float overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- float overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
+ Vector2 currentPos = PerformGestureSwipe(application, OVERSHOOT_START_SCROLL_POSITION, Vector2(1.0f, 1.0f), 10, time, false);
+ float overshootXValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_X );
+ float overshootYValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_Y );
DALI_TEST_EQUALS(overshootXValue, 0.0f, TEST_LOCATION);
DALI_TEST_EQUALS(overshootYValue, 0.0f, TEST_LOCATION);
+ time += Wait(application);
// Scroll page further in NW (-105,-105 pixels), then check that overshoot should be around 0.5. (don't release touch)
- currentPos = PerformGestureDiagonalSwipe(application, OVERSHOOT_START_SCROLL_POSITION, Vector2(1.0f, 1.0f), 105, false);
- overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
- DALI_TEST_CHECK(overshootXValue > 0.49f && overshootXValue < 0.51f);
- DALI_TEST_CHECK(overshootYValue > 0.49f && overshootYValue < 0.51f);
-
- // Scroll page further in NW (-30,-30 pixels), then check that overshoot should be now 1.0. (don't release touch)
- currentPos = PerformGestureDiagonalSwipe(application, OVERSHOOT_START_SCROLL_POSITION, Vector2(1.0f, 1.0f), 30, false);
- overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
+ for(int i = 0; i<106; i++)
+ {
+ TestMovePan(application, currentPos, time );
+ currentPos += Vector2(1.0f, 1.0f);
+ time += Wait(application);
+ }
+
+ overshootXValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_X );
+ overshootYValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_Y );
+ // The overshoot value is a 0.0f - 1.0f ranged value of the amount overshot related to the maximum overshoot.
+ // EG. If we move 105, max overshoot is 50, then we overshot 50 / 105.
+ float correctOvershootValue = 0.508f; // This was measured and then set as the limit
+ DALI_TEST_EQUALS( overshootXValue, correctOvershootValue, 0.001f, TEST_LOCATION );
+ DALI_TEST_EQUALS( overshootYValue, correctOvershootValue, 0.001f, TEST_LOCATION );
+
+ // Scroll page further in NW (-25,-25 pixels), then check that overshoot should be now 1.0. (don't release touch)
+ for(int i = 0;i<25;i++)
+ {
+ TestMovePan(application, currentPos, time );
+ currentPos += Vector2(1.0f, 1.0f); // Move in this direction
+ time += Wait(application);
+ }
+
+ overshootXValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_X );
+ overshootYValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_Y );
DALI_TEST_EQUALS(overshootXValue, 1.0f, TEST_LOCATION);
DALI_TEST_EQUALS(overshootYValue, 1.0f, TEST_LOCATION);
- // Change the max overshoot to be 100 pixels in both X axis and Y axis
- scrollView.SetMaxOvershoot(100.0f, 100.0f);
- Wait(application);
+ // Change the max overshoot to be 250 pixels in both X axis and Y axis
+ scrollView.SetMaxOvershoot(250.0f, 250.0f);
+ time += Wait(application);
// Check that overshoot should be now around 0.8.
- overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
+ overshootXValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_X );
+ overshootYValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_Y );
DALI_TEST_CHECK(overshootXValue > 0.79f && overshootXValue < 0.81f);
DALI_TEST_CHECK(overshootYValue > 0.79f && overshootYValue < 0.81f);
- // Scroll page further in NW (-30,-30 pixels), then check that overshoot should be now 1.0. (don't release touch)
- currentPos = PerformGestureDiagonalSwipe(application, OVERSHOOT_START_SCROLL_POSITION, Vector2(1.0f, 1.0f), 30, false);
- overshootXValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_X);
- overshootYValue = scrollView.GetProperty<float>(ScrollView::Property::OVERSHOOT_Y);
+ // Scroll page further in NW (-50,-50 pixels), then check that overshoot should be now 1.0. (don't release touch)
+ for(int i = 0;i<50;i++)
+ {
+ TestMovePan(application, currentPos, time );
+ currentPos += Vector2(1.0f, 1.0f); // Move in this direction
+ time += Wait(application);
+ }
+
+ overshootXValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_X );
+ overshootYValue = scrollView.GetCurrentProperty< float >( ScrollView::Property::OVERSHOOT_Y );
DALI_TEST_EQUALS(overshootXValue, 1.0f, TEST_LOCATION);
DALI_TEST_EQUALS(overshootYValue, 1.0f, TEST_LOCATION);
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
Vector2 START_POSITION = Vector2(10.0f, 10.0f);
scrollView.ScrollTo(START_POSITION, 0.0f);
- Wait(application);
+ uint32_t time = 0;
+ time += Wait(application);
+
// Try a vertical swipe.
- PerformGestureDiagonalSwipe(application, START_POSITION, Vector2(0.0f, 1.0f), 60, true);
- DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), Vector2(10.0f, -50.0f), TEST_LOCATION );
+ // PerformGestureSwipe not used as a different initial direction was required
+
+ Vector2 pos( START_POSITION + Vector2(0.0f, 15.0f) );
+ TestStartPan( application, START_POSITION, pos, time );
+ time += Wait(application);
+ for( int i = 0; i<45; i++ )
+ {
+ pos += Vector2(0.0f, 1.0f);
+ TestMovePan( application, pos, time );
+ time += Wait( application );
+ }
+ pos += Vector2(0.0f, 1.0f);
+ TestEndPan( application, pos, time );
+ time += Wait( application );
+
+ // Take into account resampling done when prediction is off.
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition() - Vector2(0.0f, 0.5f), Vector2(10.0f, -50.0f), 0.25f, TEST_LOCATION );
scrollView.SetScrollingDirection(Dali::PanGestureDetector::DIRECTION_VERTICAL);
scrollView.ScrollTo(START_POSITION, 0.0f);
- Wait(application);
+ time += Wait(application);
+
// Try a vertical swipe.
- PerformGestureDiagonalSwipe(application, START_POSITION, Vector2(0.0f, 1.0f), 60, true);
- DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), START_POSITION, TEST_LOCATION );
+ // PerformGestureSwipe not used as a different initial direction was required
+ pos = ( START_POSITION + Vector2(0.0f, 15.0f) );
+ TestStartPan( application, START_POSITION, pos, time );
+ time += Wait(application);
+ for( int i = 0; i<45; i++ )
+ {
+ pos += Vector2(0.0f, 1.0f);
+ TestMovePan( application, pos, time );
+ time += Wait( application );
+ }
+ pos += Vector2(0.0f, 1.0f);
+ TestEndPan( application, pos, time );
+ time += Wait( application );
+
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition() - Vector2(0.0f, 0.5f), Vector2(10.0f, -50.0f), 0.25f, TEST_LOCATION );
scrollView.RemoveScrollingDirection(Dali::PanGestureDetector::DIRECTION_VERTICAL);
- scrollView.ScrollTo(Vector2(10.0f, 10.0f), 0.0f);
- Wait(application);
+ scrollView.ScrollTo(START_POSITION, 0.0f);
+
+ time += Wait(application);
+
// Try a vertical swipe.
- PerformGestureDiagonalSwipe(application, START_POSITION, Vector2(0.0f, 1.0f), 60, true);
- DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), Vector2(10.0f, -50.0f), TEST_LOCATION );
+ // PerformGestureSwipe not used as a different initial direction was required
+ pos = ( START_POSITION + Vector2(0.0f, 15.0f) );
+ TestStartPan( application, START_POSITION, pos, time );
+ time += Wait(application);
+ for( int i = 0; i<45; i++ )
+ {
+ pos += Vector2(0.0f, 1.0f);
+ TestMovePan( application, pos, time );
+ time += Wait( application );
+ }
+ pos += Vector2(0.0f, 1.0f);
+ TestEndPan( application, pos, time );
+ time += Wait( application );
+
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition() - Vector2(0.0f, 0.5f), Vector2(10.0f, -50.0f), 0.25f, TEST_LOCATION );
END_TEST;
}
// Set up a scrollView...
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
- Vector2 stageSize = Stage::GetCurrent().GetSize();
- scrollView.SetSize(stageSize);
- scrollView.SetParentOrigin(ParentOrigin::TOP_LEFT);
- scrollView.SetAnchorPoint(AnchorPoint::TOP_LEFT);
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
Vector2 START_POSITION = Vector2(10.0f, 10.0f);
+ uint32_t time = 0;
scrollView.SetScrollingDirection(Dali::PanGestureDetector::DIRECTION_VERTICAL);
scrollView.ScrollTo(START_POSITION, 0.0f);
- Wait(application);
- // Try a vertical swipe.
- PerformGestureDiagonalSwipe(application, START_POSITION, Vector2(0.0f, 1.0f), 60, true);
+
+ time += Wait(application);
+
DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), START_POSITION, TEST_LOCATION );
+ // Try a vertical swipe.
+ // PerformGestureSwipe not used as a different initial direction was required
+ Vector2 pos( START_POSITION + Vector2(0.0f, 15.0f) );
+ TestStartPan( application, START_POSITION, pos, time );
+ time += Wait(application);
+ for( int i = 0; i<45; i++ )
+ {
+ pos += Vector2(0.0f, 1.0f);
+ TestMovePan( application, pos, time );
+ time += Wait( application );
+ }
+ pos += Vector2(0.0f, 1.0f);
+ TestEndPan( application, pos, time );
+ time += Wait( application );
+
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition() - Vector2(0.0f, 0.5f), Vector2(10.0f, -50.0f), 0.25f, TEST_LOCATION );
+
scrollView.RemoveScrollingDirection(Dali::PanGestureDetector::DIRECTION_VERTICAL);
+ // When the horizontal direction is removed, there are no directions set and therefore all will work
+ scrollView.SetScrollingDirection(Dali::PanGestureDetector::DIRECTION_HORIZONTAL);
- scrollView.ScrollTo(Vector2(10.0f, 10.0f), 0.0f);
- Wait(application);
+ time += Wait(application);
// Try a vertical swipe.
- PerformGestureDiagonalSwipe(application, START_POSITION, Vector2(0.0f, 1.0f), 60, true);
- DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), Vector2(10.0f, -50.0f), TEST_LOCATION );
+ Vector2 pos2( pos + Vector2(0.0f, 15.0f) );
+ TestStartPan( application, pos, pos2, time );
+ time += Wait(application);
+ for( int i = 0; i<45; i++ )
+ {
+ pos2 += Vector2(0.0f, 1.0f);
+ TestMovePan( application, pos2, time );
+ time += Wait( application );
+ }
+ pos2 += Vector2(0.0f, 1.0f);
+ TestEndPan( application, pos2, time );
+
+ // The previous scroll should not have had any effect
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition() - Vector2(0.0f, 0.5f), Vector2(10.0f, -50.0f), 0.25f, TEST_LOCATION );
END_TEST;
}
tet_infoline(" UtcDaliToolkitScrollViewSetRulerXP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerX = new FixedRuler( 100.0f );
rulerX->SetDomain( RulerDomain(0.0f, 800.0f, true) );
tet_infoline(" UtcDaliToolkitScrollViewSetRulerYP");
ScrollView scrollView = ScrollView::New();
- Stage::GetCurrent().Add( scrollView );
+ application.GetScene().Add( scrollView );
RulerPtr rulerY = new FixedRuler( 200.0f );
rulerY->SetDomain( RulerDomain(0.0f, 400.0f, true) );
END_TEST;
}
-int UtcDaliToolkitScrollViewSetMouseWheelScrollDistanceStepP(void)
+int UtcDaliToolkitScrollViewSetWheelScrollDistanceStepP(void)
{
ToolkitTestApplication application;
- tet_infoline(" UtcDaliToolkitScrollViewSetMouseWheelScrollDistanceStepP");
+ tet_infoline(" UtcDaliToolkitScrollViewSetWheelScrollDistanceStepP");
ScrollView scrollView = ScrollView::New();
// Disable Refresh signal (TET environment cannot use adaptor's Timer)
- scrollView.SetMouseWheelScrollDistanceStep(Vector2(30.0f, 15.0f));
- DALI_TEST_EQUALS( scrollView.GetMouseWheelScrollDistanceStep(), Vector2(30.0f, 15.0f), TEST_LOCATION );
- scrollView.SetMouseWheelScrollDistanceStep(Vector2(60.0f, 30.0f));
- DALI_TEST_EQUALS( scrollView.GetMouseWheelScrollDistanceStep(), Vector2(60.0f, 30.0f), TEST_LOCATION);
+ scrollView.SetWheelScrollDistanceStep(Vector2(30.0f, 15.0f));
+ DALI_TEST_EQUALS( scrollView.GetWheelScrollDistanceStep(), Vector2(30.0f, 15.0f), TEST_LOCATION );
+ scrollView.SetWheelScrollDistanceStep(Vector2(60.0f, 30.0f));
+ DALI_TEST_EQUALS( scrollView.GetWheelScrollDistanceStep(), Vector2(60.0f, 30.0f), TEST_LOCATION);
END_TEST;
}
position = rulerNormal->GetPositionFromPage(2, volume, true);
DALI_TEST_EQUALS( position, 60.0f, TEST_LOCATION );
DALI_TEST_EQUALS( volume, 0u, TEST_LOCATION );
+
+ // Disable the ruler
+ rulerNormal->Disable();
+
+ position = rulerNormal->GetPositionFromPage(1, volume, true);
+ DALI_TEST_EQUALS( position, 10.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( volume, 1u, TEST_LOCATION );
+
+ position = rulerNormal->GetPositionFromPage(2, volume, true);
+ DALI_TEST_EQUALS( position, 10.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( volume, 2u, TEST_LOCATION );
+
END_TEST;
}
DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(-350.0f, true), 0u, TEST_LOCATION);
DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(-350.0f, false), 0u, TEST_LOCATION);
+ // Set domain size to be smaller than the ruler space
+ fixedRuler->SetDomain( RulerDomain(0.0f, 50.0f, true) );
+
+ fixedRuler->Enable();
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(250.0f, true), 0u, TEST_LOCATION);
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(250.0f, false), 3u, TEST_LOCATION);
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(-350.0f, true), 0u, TEST_LOCATION);
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(-350.0f, false), 0u, TEST_LOCATION);
+
+ fixedRuler->Disable();
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(250.0f, true), 0u, TEST_LOCATION);
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(250.0f, false), 0u, TEST_LOCATION);
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(-350.0f, true), 0u, TEST_LOCATION);
+ DALI_TEST_EQUALS( fixedRuler->GetPageFromPosition(-350.0f, false), 0u, TEST_LOCATION);
+
END_TEST;
}
END_TEST;
}
+int UtcDaliToolkitScrollViewConstraintsMove(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline(" UtcDaliToolkitScrollViewConstraintsMove");
+ // Set up a scrollView...
+ ScrollView scrollView = ScrollView::New();
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
+ // Position rulers.
+ RulerPtr rulerX = new DefaultRuler();
+ RulerPtr rulerY = new DefaultRuler();
+ rulerX->SetDomain( RulerDomain(0.0f, stageSize.width + CLAMP_EXCESS_WIDTH, true) );
+ rulerY->SetDomain( RulerDomain(0.0f, stageSize.height + CLAMP_EXCESS_HEIGHT, true) );
+ scrollView.SetRulerX(rulerX);
+ scrollView.SetRulerY(rulerY);
+ // Add an Actor to ScrollView,
+ Actor a = Actor::New();
+ scrollView.Add(a);
+ a.SetProperty( Actor::Property::POSITION, TEST_ACTOR_POSITION);
+ Wait(application);
+
+ const Vector2 target = Vector2(100.0f, 100.0f);
+ const Vector2 target2 = Vector2(200.0f, 200.0f);
+
+ Constraint constraint = Constraint::New<Vector3>( scrollView, Actor::Property::POSITION, MoveActorConstraint );
+ constraint.AddSource( Source(scrollView, ScrollView::Property::SCROLL_POSITION) );
+ constraint.SetRemoveAction(Constraint::Discard);
+ scrollView.ApplyConstraintToChildren(constraint);
+
+ scrollView.ScrollTo( target, 0.0f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), target, TEST_LOCATION );
+ scrollView.ScrollTo( target2 );
+ Wait(application, RENDER_DELAY_SCROLL);
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), target2, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliToolkitScrollViewConstraintsWrap(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline(" UtcDaliToolkitScrollViewConstraintsWrap");
+
+ // Set up a scrollView...
+ ScrollView scrollView = ScrollView::New();
+ application.GetScene().Add( scrollView );
+ Vector2 stageSize = application.GetScene().GetSize();
+ scrollView.SetProperty( Actor::Property::SIZE, stageSize);
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN,ParentOrigin::TOP_LEFT);
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT,AnchorPoint::TOP_LEFT);
+
+ // Position rulers.
+ RulerPtr rulerX = new DefaultRuler();
+ RulerPtr rulerY = new DefaultRuler();
+ rulerX->SetDomain( RulerDomain(0.0f, stageSize.width + CLAMP_EXCESS_WIDTH, true) );
+ rulerY->SetDomain( RulerDomain(0.0f, stageSize.height + CLAMP_EXCESS_HEIGHT, true) );
+ scrollView.SetRulerX(rulerX);
+ scrollView.SetRulerY(rulerY);
+
+ // Add an Actor to ScrollView,
+ Actor a = Actor::New();
+ scrollView.Add(a);
+ a.SetProperty( Actor::Property::POSITION, TEST_ACTOR_POSITION);
+ Wait(application);
+
+ const Vector2 target = Vector2(100.0f, 100.0f);
+ const Vector2 target2 = Vector2(200.0f, 200.0f);
+
+ Constraint constraint = Constraint::New<Vector3>( scrollView, Actor::Property::POSITION, WrapActorConstraint );
+ constraint.AddSource( LocalSource( Actor::Property::SCALE ) );
+ constraint.AddSource( LocalSource( Actor::Property::ANCHOR_POINT ) );
+ constraint.AddSource( LocalSource( Actor::Property::SIZE ) );
+ constraint.AddSource( Source( scrollView, Toolkit::Scrollable::Property::SCROLL_POSITION_MIN ) );
+ constraint.AddSource( Source( scrollView, Toolkit::Scrollable::Property::SCROLL_POSITION_MAX ) );
+ constraint.AddSource( Source( scrollView, Toolkit::ScrollView::Property::WRAP ) );
+ constraint.SetRemoveAction(Constraint::Discard);
+ scrollView.ApplyConstraintToChildren(constraint);
+
+ scrollView.ScrollTo( target, 0.0f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), target, TEST_LOCATION );
+ scrollView.ScrollTo( target2 );
+ Wait(application, RENDER_DELAY_SCROLL);
+ DALI_TEST_EQUALS( scrollView.GetCurrentScrollPosition(), target2, TEST_LOCATION );
+
+ scrollView.Remove(a);
+ Wait(application);
+
+ END_TEST;
+}
+
+// Non-API test (so no P or N variant).
+int UtcDaliToolkitScrollViewGesturePageLimit(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( " UtcDaliToolkitScrollViewGesturePageLimit" );
+
+ // Set up a scrollView.
+ ScrollView scrollView = ScrollView::New();
+
+ // Do not rely on stage size for UTC tests.
+ Vector2 viewPageSize( 720.0f, 1280.0f );
+ scrollView.SetResizePolicy( ResizePolicy::FIXED, Dimension::ALL_DIMENSIONS );
+ scrollView.SetProperty( Actor::Property::SIZE, viewPageSize );
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN, ParentOrigin::CENTER );
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT, AnchorPoint::CENTER );
+ scrollView.SetProperty( Actor::Property::POSITION, Vector3( 0.0f, 0.0f, 0.0f ));
+
+ // Position rulers.
+ // We set the X ruler to fixed to give us pages to snap to.
+ Dali::Toolkit::FixedRuler* rulerX = new Dali::Toolkit::FixedRuler( viewPageSize.width );
+ // Note: The 3x page width is arbitary, but we need enough to show that we are
+ // capping page movement by the page limiter, and not the domain.
+ rulerX->SetDomain( Dali::Toolkit::RulerDomain( 0.0f, viewPageSize.width * 3.0f, false ) );
+ Dali::Toolkit::RulerPtr rulerY = new Dali::Toolkit::DefaultRuler();
+ rulerY->Disable();
+ scrollView.SetRulerX( rulerX );
+ scrollView.SetRulerY( rulerY );
+
+ scrollView.SetWrapMode( false );
+ scrollView.SetScrollSensitive( true );
+
+ application.GetScene().Add( scrollView );
+
+ // Set up a gesture to perform.
+ Vector2 startPos( 50.0f, 0.0f );
+ Vector2 direction( -5.0f, 0.0f );
+ int frames = 200;
+
+ // Force starting position.
+ scrollView.ScrollTo( startPos, 0.0f );
+ uint32_t time = 0;
+ time += Wait( application );
+
+ // Deliberately skip the "Finished" part of the gesture, so we can read the coordinates before the snap begins.
+ Vector2 currentPos( PerformGestureSwipe( application, startPos, direction, frames - 1, time, false ) );
+
+ // Confirm the final X coord has not moved more than one page from the start X position.
+ DALI_TEST_GREATER( ( startPos.x + viewPageSize.width ), scrollView.GetCurrentScrollPosition().x, TEST_LOCATION );
+
+ // Finish the gesture and wait for the snap.
+ currentPos += direction;
+ TestEndPan(application, currentPos, time);
+ // We add RENDER_FRAME_INTERVAL on to wait for an extra frame (for the last "finished" gesture to complete first.
+ time += Wait( application, RENDER_DELAY_SCROLL + RENDER_FRAME_INTERVAL );
+
+ // Confirm the final X coord has snapped to exactly one page ahead of the start page.
+ DALI_TEST_EQUALS( viewPageSize.width, scrollView.GetCurrentScrollPosition().x, Math::MACHINE_EPSILON_0, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliScrollViewSetGetProperty(void)
+{
+ ToolkitTestApplication application;
+
+ // Create the ScrollView actor
+ ScrollView scrollView = ScrollView::New();
+ DALI_TEST_CHECK(scrollView);
+
+ // Event side properties
+
+ // Test "wrapEnabled" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("wrapEnabled") == ScrollView::Property::WRAP_ENABLED );
+ scrollView.SetProperty( ScrollView::Property::WRAP_ENABLED, true );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::WRAP_ENABLED).Get<bool>(), true, TEST_LOCATION );
+
+ // Test "panningEnabled" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("panningEnabled") == ScrollView::Property::PANNING_ENABLED );
+ scrollView.SetProperty( ScrollView::Property::PANNING_ENABLED, false );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::PANNING_ENABLED).Get<bool>(), false, TEST_LOCATION );
+
+ // Test "axisAutoLockEnabled" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("axisAutoLockEnabled") == ScrollView::Property::AXIS_AUTO_LOCK_ENABLED );
+ scrollView.SetProperty( ScrollView::Property::AXIS_AUTO_LOCK_ENABLED, false );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::AXIS_AUTO_LOCK_ENABLED).Get<bool>(), false, TEST_LOCATION );
+
+ // Test "wheelScrollDistanceStep" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("wheelScrollDistanceStep") == ScrollView::Property::WHEEL_SCROLL_DISTANCE_STEP );
+ scrollView.SetProperty( ScrollView::Property::WHEEL_SCROLL_DISTANCE_STEP, Vector2(100.0f, 50.0f) );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::WHEEL_SCROLL_DISTANCE_STEP).Get<Vector2>(), Vector2(100.0f, 50.0f), TEST_LOCATION );
+
+ // Test "overshootEnabled" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("overshootEnabled") == Scrollable::Property::OVERSHOOT_ENABLED );
+ DALI_TEST_EQUALS( scrollView.GetProperty(Scrollable::Property::OVERSHOOT_ENABLED).Get<bool>(), scrollView.IsOvershootEnabled(), TEST_LOCATION );
+ scrollView.SetProperty( Scrollable::Property::OVERSHOOT_ENABLED, false );
+ DALI_TEST_EQUALS( scrollView.GetProperty(Scrollable::Property::OVERSHOOT_ENABLED).Get<bool>(), false, TEST_LOCATION );
+
+ // Animatable properties
+
+ // Test "scrollPosition" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPosition") == ScrollView::Property::SCROLL_POSITION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_POSITION, Vector2(320.0f, 550.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_POSITION).Get<Vector2>(), Vector2(320.0f, 550.0f), TEST_LOCATION );
+
+ // Test "scrollPrePosition", "scrollPrePositionX" and "scrollPrePositionY" properties
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPrePosition") == ScrollView::Property::SCROLL_PRE_POSITION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_PRE_POSITION, Vector2(300.0f, 500.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION).Get<Vector2>(), Vector2(300.0f, 500.0f), TEST_LOCATION );
+
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPrePositionX") == ScrollView::Property::SCROLL_PRE_POSITION_X );
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPrePositionY") == ScrollView::Property::SCROLL_PRE_POSITION_Y );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_X).Get<float>(), 300.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_Y).Get<float>(), 500.0f, TEST_LOCATION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_PRE_POSITION_X, 400.0f );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_PRE_POSITION_Y, 600.0f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_X).Get<float>(), 400.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_Y).Get<float>(), 600.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION).Get<Vector2>(), Vector2(400.0f, 600.0f), TEST_LOCATION );
+
+ // Test "scrollPrePositionMax", "scrollPrePositionMaxX" and "scrollPrePositionMaxY" properties
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPrePositionMax") == ScrollView::Property::SCROLL_PRE_POSITION_MAX );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_PRE_POSITION_MAX, Vector2(100.0f, 200.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_MAX).Get<Vector2>(), Vector2(100.0f, 200.0f), TEST_LOCATION );
+
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPrePositionMaxX") == ScrollView::Property::SCROLL_PRE_POSITION_MAX_X );
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPrePositionMaxY") == ScrollView::Property::SCROLL_PRE_POSITION_MAX_Y );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_MAX_X).Get<float>(), 100.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_MAX_Y).Get<float>(), 200.0f, TEST_LOCATION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_PRE_POSITION_MAX_X, 300.0f );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_PRE_POSITION_MAX_Y, 400.0f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_MAX_X).Get<float>(), 300.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_MAX_Y).Get<float>(), 400.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_PRE_POSITION_MAX).Get<Vector2>(), Vector2(300.0f, 400.0f), TEST_LOCATION );
+
+ // Test "overshootX" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("overshootX") == ScrollView::Property::OVERSHOOT_X );
+ scrollView.SetProperty( ScrollView::Property::OVERSHOOT_X, 0.8f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::OVERSHOOT_X).Get<float>(), 0.8f, TEST_LOCATION );
+
+ // Test "overshootY" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("overshootY") == ScrollView::Property::OVERSHOOT_Y );
+ scrollView.SetProperty( ScrollView::Property::OVERSHOOT_Y, 0.8f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::OVERSHOOT_Y).Get<float>(), 0.8f, TEST_LOCATION );
+
+ // Test "scrollFinal", "scrollFinalX" and "scrollFinalY" properties
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollFinal") == ScrollView::Property::SCROLL_FINAL );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_FINAL, Vector2(200.0f, 300.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_FINAL).Get<Vector2>(), Vector2(200.0f, 300.0f), TEST_LOCATION );
+
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollFinalX") == ScrollView::Property::SCROLL_FINAL_X );
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollFinalY") == ScrollView::Property::SCROLL_FINAL_Y );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_FINAL_X).Get<float>(), 200.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_FINAL_Y).Get<float>(), 300.0f, TEST_LOCATION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_FINAL_X, 500.0f );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_FINAL_Y, 600.0f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_FINAL_X).Get<float>(), 500.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_FINAL_Y).Get<float>(), 600.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_FINAL).Get<Vector2>(), Vector2(500.0f, 600.0f), TEST_LOCATION );
+
+ // Test "wrap" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("wrap") == ScrollView::Property::WRAP );
+ scrollView.SetProperty( ScrollView::Property::WRAP, false );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::WRAP).Get<bool>(), false, TEST_LOCATION );
+
+ // Test "panning" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("panning") == ScrollView::Property::PANNING );
+ scrollView.SetProperty( ScrollView::Property::PANNING, true );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::PANNING).Get<bool>(), true, TEST_LOCATION );
+
+ // Test "scrolling" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrolling") == ScrollView::Property::SCROLLING );
+ scrollView.SetProperty( ScrollView::Property::SCROLLING, false );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLLING).Get<bool>(), false, TEST_LOCATION );
+
+ // Test "scrollDomainSize", "scrollDomainSizeX" and "scrollDomainSizeY" properties
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollDomainSize") == ScrollView::Property::SCROLL_DOMAIN_SIZE );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_DOMAIN_SIZE, Vector2(1200.0f, 1300.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_SIZE).Get<Vector2>(), Vector2(1200.0f, 1300.0f), TEST_LOCATION );
+
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollDomainSizeX") == ScrollView::Property::SCROLL_DOMAIN_SIZE_X );
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollDomainSizeY") == ScrollView::Property::SCROLL_DOMAIN_SIZE_Y );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_SIZE_X).Get<float>(), 1200.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_SIZE_Y).Get<float>(), 1300.0f, TEST_LOCATION );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_DOMAIN_SIZE_X, 1500.0f );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_DOMAIN_SIZE_Y, 1600.0f );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_SIZE_X).Get<float>(), 1500.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_SIZE_Y).Get<float>(), 1600.0f, TEST_LOCATION );
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_SIZE).Get<Vector2>(), Vector2(1500.0f, 1600.0f), TEST_LOCATION );
+
+ // Test "scrollDomainOffset" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollDomainOffset") == ScrollView::Property::SCROLL_DOMAIN_OFFSET );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_DOMAIN_OFFSET, Vector2(500.0f, 200.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_DOMAIN_OFFSET).Get<Vector2>(), Vector2(500.0f, 200.0f), TEST_LOCATION );
+
+ // Test "scrollPositionDelta" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("scrollPositionDelta") == ScrollView::Property::SCROLL_POSITION_DELTA );
+ scrollView.SetProperty( ScrollView::Property::SCROLL_POSITION_DELTA, Vector2(10.0f, 30.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::SCROLL_POSITION_DELTA).Get<Vector2>(), Vector2(10.0f, 30.0f), TEST_LOCATION );
+
+ // Test "startPagePosition" property
+ DALI_TEST_CHECK( scrollView.GetPropertyIndex("startPagePosition") == ScrollView::Property::START_PAGE_POSITION );
+ scrollView.SetProperty( ScrollView::Property::START_PAGE_POSITION, Vector3(50.0f, 100.0f, 20.0f) );
+ Wait(application);
+ DALI_TEST_EQUALS( scrollView.GetProperty(ScrollView::Property::START_PAGE_POSITION).Get<Vector3>(), Vector3(50.0f, 100.0f, 20.0f), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliToolkitScrollViewWheelEvent(void)
+{
+ ToolkitTestApplication application;
+
+ // Set up a scrollView.
+ ScrollView scrollView = ScrollView::New();
+
+ // Do not rely on stage size for UTC tests.
+ Vector2 viewPageSize( 720.0f, 1280.0f );
+ scrollView.SetResizePolicy( ResizePolicy::FIXED, Dimension::ALL_DIMENSIONS );
+ scrollView.SetProperty( Actor::Property::SIZE, viewPageSize );
+ scrollView.SetProperty( Actor::Property::PARENT_ORIGIN, ParentOrigin::CENTER );
+ scrollView.SetProperty( Actor::Property::ANCHOR_POINT, AnchorPoint::CENTER );
+ scrollView.SetProperty( Actor::Property::POSITION, Vector3( 0.0f, 0.0f, 0.0f ));
+
+ // Position rulers.
+ // We set the X ruler to fixed to give us pages to snap to.
+ Dali::Toolkit::FixedRuler* rulerX = new Dali::Toolkit::FixedRuler( viewPageSize.width );
+ // Note: The 3x page width is arbitary, but we need enough to show that we are
+ // capping page movement by the page limiter, and not the domain.
+ rulerX->SetDomain( Dali::Toolkit::RulerDomain( 0.0f, viewPageSize.width * 3.0f, false ) );
+ Dali::Toolkit::RulerPtr rulerY = new Dali::Toolkit::DefaultRuler();
+ rulerY->Disable();
+ scrollView.SetRulerX( rulerX );
+ scrollView.SetRulerY( rulerY );
+
+ scrollView.SetWrapMode( false );
+
+ application.GetScene().Add( scrollView );
+
+ //Connect to wheel event signal
+ scrollView.WheelEventSignal().Connect( &OnWheelEvent );
+
+ DALI_TEST_CHECK( !gOnWheelEventCalled );
+
+ // Render and notify
+ application.Render();
+ application.SendNotification();
+ application.Render();
+ application.SendNotification();
+
+ // Perform a wheel event
+ Dali::Integration::WheelEvent wheelEvent( Dali::Integration::WheelEvent::MOUSE_WHEEL, 0, 0u, Vector2( 10.0f, 10.0f ), 1, 1000u );
+ application.ProcessEvent( wheelEvent );
+ DALI_TEST_CHECK( gOnWheelEventCalled );
+
+ // Set X ruler to free
+ Dali::Toolkit::DefaultRuler* defaultRuler = new Dali::Toolkit::DefaultRuler();
+ scrollView.SetRulerX( defaultRuler );
+
+ // Perform a wheel event
+ gOnWheelEventCalled = false;
+ application.ProcessEvent( wheelEvent );
+ DALI_TEST_CHECK( gOnWheelEventCalled );
+
+ // Enable Y ruler
+ rulerY->Enable();
+
+ // Perform a wheel event
+ gOnWheelEventCalled = false;
+ application.ProcessEvent( wheelEvent );
+ DALI_TEST_CHECK( gOnWheelEventCalled );
+
+ // Wait until it finishes scrolling
+ Wait(application, RENDER_DELAY_SCROLL);
+
+ // Set Y ruler to fixed
+ Dali::Toolkit::FixedRuler* fixedRulerY = new Dali::Toolkit::FixedRuler( viewPageSize.height );
+ scrollView.SetRulerY( fixedRulerY );
+
+ // Perform a wheel event
+ gOnWheelEventCalled = false;
+ application.ProcessEvent( wheelEvent );
+ DALI_TEST_CHECK( gOnWheelEventCalled );
+
+ END_TEST;
+}
projects / platform / core / uifw / dali-toolkit.git / blobdiff