gResourceReadySignalFired = true;
}
-
Actor CreateActorWithImageVisual(const Property::Map& map)
{
VisualFactory factory = VisualFactory::Get();
int UtcDaliImageVisualLoadPolicy03(void)
{
ToolkitTestApplication application;
- tet_infoline( "UtcDaliImageVisualLoadPolicy03 Load a visual image before attaching to stage and receive ResourceReady signal" );
+ tet_infoline( "UtcDaliImageVisualLoadPolicy03 Load a visual image and receive ResourceReady Signal when loaded" );
+
+ const bool VISUAL_NOT_ENABLED( false ); // Instead of just passing 'false' into an API.
// Set up trace debug
TestGlAbstraction& gl = application.GetGlAbstraction();
TraceCallStack& textureTrace = gl.GetTextureTrace();
textureTrace.Enable(true);
+ tet_infoline( "Create a control and connect to resource ready signal without adding to stage" );
+ DummyControl actor = DummyControl::New(true);
+ actor.ResourceReadySignal().Connect( &ResourceReadySignal);
+ Impl::DummyControl& dummyImpl = static_cast<Impl::DummyControl&>(actor.GetImplementation());
+ actor.SetSize(200.f, 200.f);
+
tet_infoline( "Create visual with IMMEDIATE load policy" );
Visual::Base imageVisual = CreateVisualWithPolicy( TEST_IMAGE_FILE_NAME, DevelImageVisual::Property::LOAD_POLICY, DevelImageVisual::LoadPolicy::IMMEDIATE );
- // Wait for image to load, ResourceReady signal will not be emitted until Visual is registered with a control and on stage.
+ tet_infoline( "Registering visual allows control to get a signal once loaded even if visual not enabled( not staged )" );
+ dummyImpl.RegisterVisual( DummyControl::Property::TEST_VISUAL, imageVisual, VISUAL_NOT_ENABLED );
+ imageVisual.Reset(); // reduce ref count so only the control keeps the visual alive.
+
+ tet_infoline( "Allow image time to load resource" );
DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 1 ), true, TEST_LOCATION );
+ application.SendNotification();
+ application.Render();
// Ensure texture has been uploaded
+ DALI_TEST_EQUALS( textureTrace.FindMethod("GenTextures"), true, TEST_LOCATION );
+ DALI_TEST_EQUALS( gResourceReadySignalFired, true, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageVisualLoadPolicy04(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( "UtcDaliImageVisualLoadPolicy04 First part Load a visual image before attaching to stage");
+ tet_infoline( "Second part, Reuse the same image in aonther control and check resource ready signal fired" );
+
+ const bool VISUAL_NOT_ENABLED( false ); // Instead of just passing false into an API.
+
+ // Set up trace debug
+ TestGlAbstraction& gl = application.GetGlAbstraction();
+ TraceCallStack& textureTrace = gl.GetTextureTrace();
+ textureTrace.Enable(true);
+
+ tet_infoline( "Create a control and connect to resource ready signal" );
+ DummyControl actor = DummyControl::New(true);
+ actor.ResourceReadySignal().Connect( &ResourceReadySignal);
+ Impl::DummyControl& dummyImpl = static_cast<Impl::DummyControl&>(actor.GetImplementation());
+ actor.SetSize(200.f, 200.f);
+
+ tet_infoline( "Create visual with IMMEDIATE load policy" );
+ Visual::Base imageVisual = CreateVisualWithPolicy( TEST_IMAGE_FILE_NAME, DevelImageVisual::Property::LOAD_POLICY, DevelImageVisual::LoadPolicy::IMMEDIATE );
+
+ tet_infoline( "Registering visual allows control to get a signal once loaded even if visual not enabled( staged )" );
+ dummyImpl.RegisterVisual( DummyControl::Property::TEST_VISUAL, imageVisual, VISUAL_NOT_ENABLED );
+ imageVisual.Reset(); // reduce ref count so only the control keeps the visual alive.
+
+ tet_infoline( "Allow image time to load" );
+ DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 1 ), true, TEST_LOCATION );
application.SendNotification();
application.Render();
- tet_infoline( "Ensure texture loading starts after visual created" );
+ tet_infoline( "Testing texture is loaded and resource ready signal fired" );
DALI_TEST_EQUALS( textureTrace.FindMethod("GenTextures"), true, TEST_LOCATION );
- textureTrace.Reset();
+ DALI_TEST_EQUALS( gResourceReadySignalFired, true, TEST_LOCATION );
- tet_infoline( "Register visuals with control and ensure it has the only handles" );
+ tet_infoline( "Original control correctly signalled, now testing for signal with new Control reusing the image" );
+
+ gResourceReadySignalFired = false; // Reset signal check ready for testing next Control
+ Visual::Base imageVisual2 = CreateVisualWithPolicy( TEST_IMAGE_FILE_NAME, DevelImageVisual::Property::LOAD_POLICY, DevelImageVisual::LoadPolicy::IMMEDIATE );
+ DummyControl actor2 = DummyControl::New(true);
+ Impl::DummyControl& dummyImpl2 = static_cast<Impl::DummyControl&>(actor.GetImplementation());
+ actor2.ResourceReadySignal().Connect( &ResourceReadySignal);
+
+ tet_infoline( "Registering visual this should trigger the loading signal as is already image loaded for previous control" );
+ dummyImpl2.RegisterVisual( DummyControl::Property::TEST_VISUAL, imageVisual2 );
+ imageVisual2.Reset(); // reduce ref count so only the control keeps the visual alive.
+ actor2.SetSize(200.f, 200.f);
+ DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 0 ), true, TEST_LOCATION ); // Not expecting any further loading as texture is being reused.
+ DALI_TEST_EQUALS( gResourceReadySignalFired, true, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageVisualLoadPolicy05(void)
+{
+ ToolkitTestApplication application;
+ tet_infoline( "UtcDaliImageVisualLoadPolicy05 LoadPolicy::ATTACHED (default) First part Load a visual image before attaching to stage");
+ tet_infoline( "Second part, Reuse the same image in aonther control and check resource ready signal fired" );
+ // Set up trace debug
+ TestGlAbstraction& gl = application.GetGlAbstraction();
+ TraceCallStack& textureTrace = gl.GetTextureTrace();
+ textureTrace.Enable(true);
+
+ tet_infoline( "Create a control and connect to resource ready signal" );
DummyControl actor = DummyControl::New(true);
actor.ResourceReadySignal().Connect( &ResourceReadySignal);
Impl::DummyControl& dummyImpl = static_cast<Impl::DummyControl&>(actor.GetImplementation());
+ actor.SetSize(200.f, 200.f);
+ Stage::GetCurrent().Add( actor );
- tet_infoline( "Registering visual attaches it to stage and trigger the loading signal if Image loaded" );
+ tet_infoline( "Create visual with ATTACHED load policy" );
+ Visual::Base imageVisual = CreateVisualWithPolicy( TEST_IMAGE_FILE_NAME, DevelImageVisual::Property::LOAD_POLICY, DevelImageVisual::LoadPolicy::ATTACHED );
+
+ tet_infoline( "Registering visual allows control to get a signal once loaded" );
dummyImpl.RegisterVisual( DummyControl::Property::TEST_VISUAL, imageVisual );
imageVisual.Reset(); // reduce ref count so only the control keeps the visual alive.
- actor.SetSize(200.f, 200.f);
- // Adding the Control hence Visual to stage will cause the Visual to trigger ResourceReadySignal if the image is already loaded.
- Stage::GetCurrent().Add( actor ); // If LoadPolicy was not IMMEDIATE then as this point (after attached to stage) the test would need to wait for Loading
+ tet_infoline( "Allow image time to load" );
+ DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 1 ), true, TEST_LOCATION );
+ application.SendNotification();
+ application.Render();
+
+ tet_infoline( "Testing texture is loaded and resource ready signal fired" );
+ DALI_TEST_EQUALS( textureTrace.FindMethod("GenTextures"), true, TEST_LOCATION );
+ DALI_TEST_EQUALS( gResourceReadySignalFired, true, TEST_LOCATION );
+
+ tet_infoline( "Original control correctly signalled, now testing for signal with new Control reusing the image" );
+
+ gResourceReadySignalFired = false; // Reset signal check ready for testing next Control
+ Visual::Base imageVisual2 = CreateVisualWithPolicy( TEST_IMAGE_FILE_NAME, DevelImageVisual::Property::LOAD_POLICY, DevelImageVisual::LoadPolicy::ATTACHED );
+ DummyControl actor2 = DummyControl::New(true);
+ Impl::DummyControl& dummyImpl2 = static_cast<Impl::DummyControl&>(actor.GetImplementation());
+ actor2.ResourceReadySignal().Connect( &ResourceReadySignal);
+
+ tet_infoline( "Registering visual this should trigger the loading signal as is already image loaded for previous control" );
+ dummyImpl2.RegisterVisual( DummyControl::Property::TEST_VISUAL, imageVisual2 );
+ imageVisual2.Reset(); // reduce ref count so only the control keeps the visual alive.
+ actor2.SetSize(200.f, 200.f);
+ DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 0 ), true, TEST_LOCATION ); // Not expecting any further loading as texture is being reused.
DALI_TEST_EQUALS( gResourceReadySignalFired, true, TEST_LOCATION );
END_TEST;
}
+
int UtcDaliImageVisualOrientationCorrection(void)
{
ToolkitTestApplication application;