# # Copyright (c) 2015 Samsung Electronics Co., Ltd. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # m4_define([dali_version],[0.1.0]) AC_INIT([dali], [dali_version]) AM_INIT_AUTOMAKE([-Wall foreign]) AC_CONFIG_MACRO_DIR([m4]) AC_PROG_CXX AC_PROG_LIBTOOL AC_PROG_MKDIR_P m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) LT_INIT DALI_ADAPTOR_VERSION=dali_version AC_SUBST(DALI_ADAPTOR_VERSION) FREETYPE_REQUIRED=9.16.3 # 17.1.11 = Freetype version 2.5.2 FREETYPE_BITMAP_SUPPORT_VERSION=17.1.11 PKG_CHECK_MODULES(DALICORE, dali-core) PKG_CHECK_MODULES(EXIF, libexif) PKG_CHECK_MODULES(FREETYPE, [freetype2 >= $FREETYPE_REQUIRED]) PKG_CHECK_MODULES(FREETYPE_BITMAP_SUPPORT, [freetype2 >= $FREETYPE_BITMAP_SUPPORT_VERSION], [ freetype_bitmap_support=yes ], [ freetype_bitmap_support=no ] ) PKG_CHECK_MODULES(FONTCONFIG, fontconfig) PKG_CHECK_MODULES(PNG, libpng) PKG_CHECK_MODULES(LIBEXIF, libexif) PKG_CHECK_MODULES(LIBDRM, libdrm) PKG_CHECK_MODULES(LIBCURL, libcurl) PKG_CHECK_MODULES(HARFBUZZ, harfbuzz) PKG_CHECK_MODULES(FRIBIDI, fribidi) PKG_CHECK_MODULES(TTRACE, ttrace, AC_DEFINE(ENABLE_TTRACE, 1, [ttrace available]), [ AC_MSG_NOTICE([Tizen Trace not avaiable]) ] ) # Currently, dali-adaptor always requires EFL on all platforms. # (on Wayland & X11, on Tizen devices & Ubuntu PC). enable_efl=yes if test "x$enable_efl" = "xyes"; then PKG_CHECK_MODULES(ECORE, ecore) PKG_CHECK_MODULES(ECORE_IPC, ecore-ipc) PKG_CHECK_MODULES(ECORE_IMF, [ecore-imf >= 1.13], [ecore_imf_1_13=yes], [ecore_imf_1_13=no]) PKG_CHECK_MODULES(ELEMENTARY, elementary) # Check for EldBus.h in ECore PKG_CHECK_MODULES(ELDBUS, eldbus, [ eldbus_available=yes ], [ eldbus_available=no ] ) fi DALI_ELDBUS_AVAILABLE= if test "x$eldbus_available" = "xyes"; then DALI_ELDBUS_AVAILABLE=true DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_ELDBUS_AVAILABLE " fi AC_SUBST(DALI_ELDBUS_AVAILABLE) PKG_CHECK_MODULES(TPKP_CURL, tpkp-curl, [ tpkp_curl_available=yes ], [ tpkp_curl_available=no ] ) if test "x$tpkp_curl_available" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DTPK_CURL_ENABLED " fi PKG_CHECK_MODULES(UTILX, utilX, [ utilx_available=yes ], [ utilx_available=no ] ) DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DPLATFORM_TIZEN" AC_ARG_ENABLE(exportall, [AC_HELP_STRING([--enable-exportall], [enables the exporting of all the symbols in the library])], [enable_exportall=yes], [enable_exportall=no]) AC_ARG_ENABLE([debug], [AC_HELP_STRING([--enable-debug], [Turns on debugging])], [enable_debug=$enableval], [enable_debug=no]) AC_ARG_ENABLE(shaderbincache, [AC_HELP_STRING([--enable-shaderbincache], [enables shader binary cache])], [enable_shaderbincache=$enableval], [enable_shaderbincache=DISABLE]) AC_ARG_ENABLE(networklogging, [AC_HELP_STRING([--enable-networklogging], [enables network for debug tool])], [enable_networklogging=$enableval], [enable_networklogging=no]) if test "x$enable_debug" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDEBUG_ENABLED" fi if test "x$enable_debug" = "xno" -a "x$enable_exportall" = "xno"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -fvisibility=hidden -DHIDE_DALI_INTERNALS" fi if test "x$enable_shaderbincache" = "xENABLE"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DSHADERBIN_CACHE_ENABLED" fi if test "x$enable_networklogging" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNETWORK_LOGGING_ENABLED" fi # If Ecore IMF version is greater than 1.13, then some structures are different if test "x$ecore_imf_1_13" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DECORE_IMF_1_13" fi AC_ARG_ENABLE([gles], [AC_HELP_STRING([--enable-gles], [Specify the OpenGL ES version for backwards compatibility])], [enable_gles=$enableval], [enable_gles=30]) DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_GLES_VERSION=${enable_gles}" # Currently, dali-adaptor always does not require libuv because it runs on ecore on all platforms. # (on Wayland & X11, on Tizen devices & Ubuntu PC). with_libuv=no # Node.JS already has a libuv main loop running,so we have to integrate with it AM_CONDITIONAL(LIB_UV_EVENT_LOOP, test x$with_libuv != xno) build_for_libuv=no if test "x$with_libuv" != "xno"; then AC_MSG_NOTICE("build with libuv mainloop (Node.JS support) == yes"); [build_for_libuv=yes] DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DNODE_JS_SUPPORT -I${with_libuv}" else #not using libuv build AC_MSG_NOTICE("build with libuv mainloop == no (Node.JS not supported)"); fi # Currently, dali-adaptor requires appfw on Tizen # and does not require it on Ubuntu. # So we should be able to enable/disable this option for dali-adaptor. AC_ARG_ENABLE([appfw], [AC_HELP_STRING([--enable-appfw], [Builds with Tizen App framework libraries, off by default])], [enable_appfw=$enableval], [enable_appfw=no]) # Option to allow building with Tizen SDK 2.2 AC_ARG_WITH([tizen-2-2-compatibility], [AC_HELP_STRING([--with-tizen-2-2-compatibility], [Use Tizen SDK 2.2 compatibility])], [with_tizen_2_2_compatibility=$withval], [with_tizen_2_2_compatibility=no]) # Tizen Profile options AC_ARG_ENABLE([profile], [AC_HELP_STRING([--enable-profile=COMMON,MOBILE,WEARABLE,TV,IVI,UBUNTU], [Select the variant of tizen])], [enable_profile=$enableval], [enable_profile=UBUNTU]) # Ensure valid profile selected if test "x$enable_profile" != "xCOMMON" -a "x$enable_profile" != "xMOBILE" -a "x$enable_profile" != "xWEARABLE" -a "x$enable_profile" != "xTV" -a "x$enable_profile" != "xIVI" -a "x$enable_profile" != "xUBUNTU"; then AC_MSG_ERROR([$enable_profile is an invalid profile]) fi AC_ARG_ENABLE(wayland, [ --enable-wayland Build on Wayland], enable_wayland=yes, enable_wayland=no) DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DDALI_PROFILE_${enable_profile}" DALI_PROFILE_CFLAGS=" -DDALI_PROFILE_${enable_profile}" AM_CONDITIONAL([COMMON_PROFILE], [test x$enable_profile = xCOMMON]) AM_CONDITIONAL([MOBILE_PROFILE], [test x$enable_profile = xMOBILE]) AM_CONDITIONAL([WEARABLE_PROFILE], [test x$enable_profile = xWEARABLE]) AM_CONDITIONAL([TV_PROFILE], [test x$enable_profile = xTV]) AM_CONDITIONAL([IVI_PROFILE], [test x$enable_profile = xIVI]) AM_CONDITIONAL([UBUNTU_PROFILE], [test x$enable_profile = xUBUNTU]) AM_CONDITIONAL([WAYLAND], [test x$enable_wayland = xyes]) AM_CONDITIONAL([USE_EFL], [test x$enable_efl = xyes]) AM_CONDITIONAL([USE_APPFW], [test x$enable_appfw = xyes]) # Platforms with highp shader support can use vector based text AM_CONDITIONAL([ENABLE_VECTOR_BASED_TEXT_RENDERING], [test x$enable_profile = xUBUNTU]) AM_CONDITIONAL([ENABLE_NETWORK_LOGGING], [test x$enable_networklogging = xyes]) # Platforms should either enable features or remove them, they # should not disable features. This allows the developer to override # features through the command line. if test "x$enable_profile" = "xCOMMON"; then PKG_CHECK_MODULES(OPENGLES20, glesv2 egl) fi if test "x$enable_profile" = "xMOBILE"; then PKG_CHECK_MODULES(OPENGLES20, glesv2 egl) enable_assimp=no fi if test "x$enable_profile" = "xLITE"; then PKG_CHECK_MODULES(OPENGLES20, gles20) fi if test "x$enable_profile" = "xWEARABLE"; then PKG_CHECK_MODULES(OPENGLES20, glesv2) PKG_CHECK_MODULES(APPFW_WATCH, capi-appfw-watch-application, [watch_available=yes], [watch_available=no] ) PKG_CHECK_MODULES(APPCORE_WATCH, appcore-watch) if test "x$watch_available" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DAPPCORE_WATCH_AVAILABLE" fi fi if test "x$enable_profile" = "xTV"; then PKG_CHECK_MODULES(OPENGLES20, glesv2) fi if test "x$enable_profile" = "xIVI"; then PKG_CHECK_MODULES(OPENGLES20, glesv2) fi if test "x$enable_profile" = "xUBUNTU"; then PKG_CHECK_MODULES(OPENGLES20, glesv2 egl) else PKG_CHECK_MODULES(DLOG, dlog) PKG_CHECK_MODULES(TTS, tts) PKG_CHECK_MODULES(VCONF, vconf) if test "x$enable_efl" = "xyes"; then if test "x$with_tizen_2_2_compatibility" = "xno"; then PKG_CHECK_MODULES(CAPI_SYSTEM_INFO, capi-system-info) PKG_CHECK_MODULES(CAPI_SYSTEM_SENSOR, capi-system-sensor, [ capi_system_sensor_support=yes ], [ capi_system_sensor_support=no ] ) if test "x$capi_system_sensor_support" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DCAPI_SYSTEM_SENSOR_SUPPORT" fi fi fi fi # ubuntu profile test if test "x$enable_appfw" = "xyes"; then PKG_CHECK_MODULES(CAPI_APPFW_APPLICATION, capi-appfw-application) PKG_CHECK_MODULES(CAPI_SYSTEM_SYSTEM_SETTINGS, capi-system-system-settings) fi # Using EFL api's for WAYLAND AND X11 to run on ecore mainloop if test "x$enable_efl" = "xyes"; then if test "x$enable_wayland" = "xyes"; then PKG_CHECK_MODULES(WAYLAND, [ecore-wayland egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm], [DALI_USE_ECORE_WAYLAND=1], [DALI_USE_ECORE_WAYLAND=0]) else PKG_CHECK_MODULES(ECORE_X, [ecore-x], [DALI_USE_ECORE_X11=1], [DALI_USE_ECORE_X11=0]) PKG_CHECK_MODULES(X11, [x11], [DALI_USE_X11=1], [DALI_USE_X11=0]) fi fi # Using Wayland API directly ( main loop agnostic, typically for running on libuv) # wayland-extension-client include xdg-shell-client if test "x$enable_efl" = "xno"; then if test "x$enable_wayland" = "xyes"; then PKG_CHECK_MODULES(WAYLAND, [ egl wayland-egl wayland-client >= 1.2.0 xkbcommon libtbm], [DALI_USE_WAYLAND=1], [DALI_USE_WAYLAND=0]) fi fi # remove this when we update common repos # common profile currently does not have wayland extensions like xdg-shell if test "x$enable_wayland" = "xyes"; then if test "x$enable_profile" != "xCOMMON"; then PKG_CHECK_MODULES(WAYLAND_EXTENSION, xdg-shell-client text-client input-method-client) fi fi AM_CONDITIONAL([USE_ECORE_WAYLAND], [test "$DALI_USE_ECORE_WAYLAND" -eq 1]) if test x$DALI_DATA_RW_DIR != x; then dataReadWriteDir=$DALI_DATA_RW_DIR else dataReadWriteDir=${prefix}/share/dali/ fi if test x$DALI_DATA_RO_DIR != x; then dataReadOnlyDir=$DALI_DATA_RO_DIR else dataReadOnlyDir=${prefix}/share/dali/ fi if test x$TIZEN_PLATFORM_CONFIG_SUPPORTED != x; then tizenPlatformConfigSupported=$TIZEN_PLATFORM_CONFIG_SUPPORTED else tizenPlatformConfigSupported=0 fi if test x$FONT_CONFIGURATION_FILE != x; then fontConfigurationFile=$FONT_CONFIGURATION_FILE fi AC_SUBST(dataReadWriteDir) AC_SUBST(dataReadOnlyDir) AC_SUBST(DALI_ADAPTOR_CFLAGS) AC_SUBST(DALI_PROFILE_CFLAGS) AC_SUBST(fontConfigurationFile) AC_SUBST(tizenPlatformConfigSupported) # Specify the include directory for development headers #devincludepath=${includedir}/dali/internal devincludepath=${includedir} AC_SUBST(devincludepath) AC_CONFIG_FILES([ Makefile dali-adaptor.pc dali-adaptor-integration.pc ]) if test "x$freetype_bitmap_support" = "xyes"; then DALI_ADAPTOR_CFLAGS="$DALI_ADAPTOR_CFLAGS -DFREETYPE_BITMAP_SUPPORT" fi AC_OUTPUT echo " Configuration ------------- Prefix: $prefix Debug Build: $enable_debug Compile flags: $DALI_ADAPTOR_CFLAGS Freetype bitmap support (Emoji): $freetype_bitmap_support Profile: $enable_profile Data Dir (Read/Write): $dataReadWriteDir Data Dir (Read Only): $dataReadOnlyDir Tizen SDK 2.2 compatibility: $with_tizen_2_2_compatibility EldBus: $eldbus_available Shader Binary Cache: $enable_shaderbincache Using LibUV mainloop (Node.JS) $build_for_libuv Ecore Version At Least 1.13.0 $ecore_imf_1_13 Network logging enabled: $enable_networklogging Font config file: $fontConfigurationFile Building with EFL Libraries: $enable_efl Using Tizen APP FW libraries: $enable_appfw OpenGL ES version: $enable_gles Tizen Platform Config supported $tizenPlatformConfigSupported " # optional output of node.js source path if we're building with libuv if test "x$build_for_libuv" != "xno"; then echo " LibUV header path $with_libuv" fi