#!/bin/sh
-# a u t o g e n . s h
-#
-# Copyright (c) 2005-2007 United States Government as represented by
-# the U.S. Army Research Laboratory.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-#
-# 3. The name of the author may not be used to endorse or promote
-# products derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-###
-#
-# Script for automatically preparing the sources for compilation by
-# performing the myrid of necessary steps. The script attempts to
-# detect proper version support, and outputs warnings about particular
-# systems that have autotool peculiarities.
-#
-# Basically, if everything is set up and installed correctly, the
-# script will validate that minimum versions of the GNU Build System
-# tools are installed, account for several common configuration
-# issues, and then simply run autoreconf for you.
-#
-# If autoreconf fails, which can happen for many valid configurations,
-# this script proceeds to run manual preparation steps effectively
-# providing a POSIX shell script (mostly complete) reimplementation of
-# autoreconf.
-#
-# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER
-# environment variables and corresponding _OPTIONS variables (e.g.
-# AUTORECONF_OPTIONS) may be used to override the default automatic
-# detection behaviors. Similarly the _VERSION variables will override
-# the minimum required version numbers.
-#
-# Examples:
-#
-# To obtain help on usage:
-# ./autogen.sh --help
-#
-# To obtain verbose output:
-# ./autogen.sh --verbose
-#
-# To skip autoreconf and prepare manually:
-# AUTORECONF=false ./autogen.sh
-#
-# To verbosely try running with an older (unsupported) autoconf:
-# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose
-#
-# Author: Christopher Sean Morrison <morrison@brlcad.org>
-#
-######################################################################
-
-# set to minimum acceptible version of autoconf
-if [ "x$AUTOCONF_VERSION" = "x" ] ; then
- AUTOCONF_VERSION=2.52
-fi
-# set to minimum acceptible version of automake
-if [ "x$AUTOMAKE_VERSION" = "x" ] ; then
- AUTOMAKE_VERSION=1.6.0
-fi
-# set to minimum acceptible version of libtool
-if [ "x$LIBTOOL_VERSION" = "x" ] ; then
- LIBTOOL_VERSION=1.4.2
-fi
+# Run this to generate all the initial makefiles, etc.
+
+#name of package
+test "$PKG_NAME" || PKG_NAME=Package
+test "$srcdir" || srcdir=.
+
+# default version requirements ...
+test "$REQUIRED_AUTOCONF_VERSION" || REQUIRED_AUTOCONF_VERSION=2.53
+test "$REQUIRED_AUTOMAKE_VERSION" || REQUIRED_AUTOMAKE_VERSION=1.9
+test "$REQUIRED_LIBTOOL_VERSION" || REQUIRED_LIBTOOL_VERSION=1.5
+test "$REQUIRED_GETTEXT_VERSION" || REQUIRED_GETTEXT_VERSION=0.12
+test "$REQUIRED_GLIB_GETTEXT_VERSION" || REQUIRED_GLIB_GETTEXT_VERSION=2.2.0
+test "$REQUIRED_INTLTOOL_VERSION" || REQUIRED_INTLTOOL_VERSION=0.30
+test "$REQUIRED_PKG_CONFIG_VERSION" || REQUIRED_PKG_CONFIG_VERSION=0.14.0
+test "$REQUIRED_GTK_DOC_VERSION" || REQUIRED_GTK_DOC_VERSION=1.0
+test "$REQUIRED_DOC_COMMON_VERSION" || REQUIRED_DOC_COMMON_VERSION=2.3.0
+test "$REQUIRED_GNOME_DOC_UTILS_VERSION" || REQUIRED_GNOME_DOC_UTILS_VERSION=0.4.2
+
+# a list of required m4 macros. Package can set an initial value
+test "$REQUIRED_M4MACROS" || REQUIRED_M4MACROS=
+test "$FORBIDDEN_M4MACROS" || FORBIDDEN_M4MACROS=
+
+# Not all echo versions allow -n, so we check what is possible. This test is
+# based on the one in autoconf.
+ECHO_C=
+ECHO_N=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ;;
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+# some terminal codes ...
+boldface="`tput bold 2>/dev/null`"
+normal="`tput sgr0 2>/dev/null`"
+printbold() {
+ echo $ECHO_N "$boldface" $ECHO_C
+ echo "$@"
+ echo $ECHO_N "$normal" $ECHO_C
+}
+printerr() {
+ echo "$@" >&2
+}
-##################
-# ident function #
-##################
-ident ( ) {
- # extract copyright from header
- __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`"
- if [ "x$__copyright" = "x" ] ; then
- __copyright="`date +%Y`"
- fi
+# Usage:
+# compare_versions MIN_VERSION ACTUAL_VERSION
+# returns true if ACTUAL_VERSION >= MIN_VERSION
+compare_versions() {
+ ch_min_version=$1
+ ch_actual_version=$2
+ ch_status=0
+ IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
+ set $ch_actual_version
+ for ch_min in $ch_min_version; do
+ ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
+ if [ -z "$ch_min" ]; then break; fi
+ if [ -z "$ch_cur" ]; then ch_status=1; break; fi
+ if [ $ch_cur -gt $ch_min ]; then break; fi
+ if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
+ done
+ IFS="$ch_save_IFS"
+ return $ch_status
+}
- # extract version from CVS Id string
- __id="$Id: autogen.sh,v 14.97 2007/06/18 22:25:02 brlcad Exp $"
- __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`"
- if [ "x$__version" = "x" ] ; then
- __version=""
+# Usage:
+# version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
+# checks to see if the package is available
+version_check() {
+ vc_package=$1
+ vc_variable=$2
+ vc_checkprogs=$3
+ vc_min_version=$4
+ vc_source=$5
+ vc_status=1
+
+ vc_checkprog=`eval echo "\\$$vc_variable"`
+ if [ -n "$vc_checkprog" ]; then
+ printbold "using $vc_checkprog for $vc_package"
+ return 0
fi
- echo "autogen.sh build preparation script by Christopher Sean Morrison"
- echo "revised 3-clause BSD-style license, copyright (c) $__copyright"
- echo "script version $__version, ISO/IEC 9945 POSIX shell script"
+ if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
+ vc_comparator="="
+ else
+ vc_comparator=">="
+ fi
+ printbold "checking for $vc_package $vc_comparator $vc_min_version..."
+ for vc_checkprog in $vc_checkprogs; do
+ echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
+ if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
+ vc_actual_version=`$vc_checkprog --version | head -n 1 | \
+ sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
+ if compare_versions $vc_min_version $vc_actual_version; then
+ echo "found $vc_actual_version"
+ # set variables
+ eval "$vc_variable=$vc_checkprog; \
+ ${vc_variable}_VERSION=$vc_actual_version"
+ vc_status=0
+ break
+ else
+ echo "too old (found version $vc_actual_version)"
+ fi
+ else
+ echo "not found."
+ fi
+ done
+ if [ "$vc_status" != 0 ]; then
+ printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
+ printerr " to build $PKG_NAME. Download the appropriate package for"
+ printerr " from your distribution or get the source tarball at"
+ printerr " $vc_source"
+ printerr
+ exit $vc_status
+ fi
+ return $vc_status
}
+# Usage:
+# require_m4macro filename.m4
+# adds filename.m4 to the list of required macros
+require_m4macro() {
+ case "$REQUIRED_M4MACROS" in
+ $1\ * | *\ $1\ * | *\ $1) ;;
+ *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
+ esac
+}
-##################
-# USAGE FUNCTION #
-##################
-usage ( ) {
- echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [--version]"
- echo " --help Help on $NAME_OF_AUTOGEN usage"
- echo " --verbose Verbose progress output"
- echo " --quiet Quiet suppressed progress output"
- echo " --version Only perform GNU Build System version checks"
- echo
- echo "Description: This script will validate that minimum versions of the"
- echo "GNU Build System tools are installed and then run autoreconf for you."
- echo "Should autoreconf fail, manual preparation steps will be run"
- echo "potentially accounting for several common preparation issues. The"
-
- echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER,"
- echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS"
- echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the"
- echo "default automatic detection behavior."
- echo
-
- ident
-
- return 0
+forbid_m4macro() {
+ case "$FORBIDDEN_M4MACROS" in
+ $1\ * | *\ $1\ * | *\ $1) ;;
+ *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
+ esac
}
+# Usage:
+# add_to_cm_macrodirs dirname
+# Adds the dir to $cm_macrodirs, if it's not there yet.
+add_to_cm_macrodirs() {
+ case $cm_macrodirs in
+ "$1 "* | *" $1 "* | *" $1") ;;
+ *) cm_macrodirs="$cm_macrodirs $1";;
+ esac
+}
-##########################
-# VERSION_ERROR FUNCTION #
-##########################
-version_error ( ) {
- if [ "x$1" = "x" ] ; then
- echo "INTERNAL ERROR: version_error was not provided a version"
- exit 1
- fi
- if [ "x$2" = "x" ] ; then
- echo "INTERNAL ERROR: version_error was not provided an application name"
- exit 1
- fi
- $ECHO
- $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch,"
- $ECHO " at least version $1 of $2 must be installed."
- $ECHO
- $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will"
- $ECHO "run configure or make. Either the GNU Autotools will need to be installed"
- $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source"
- $ECHO "code on another system and then transferred to here. -- Cheers!"
- $ECHO
+# Usage:
+# print_m4macros_error
+# Prints an error message saying that autoconf macros were misused
+print_m4macros_error() {
+ printerr "***Error***: some autoconf macros required to build $PKG_NAME"
+ printerr " were not found in your aclocal path, or some forbidden"
+ printerr " macros were found. Perhaps you need to adjust your"
+ printerr " ACLOCAL_FLAGS?"
+ printerr
}
-##########################
-# VERSION_CHECK FUNCTION #
-##########################
-version_check ( ) {
- if [ "x$1" = "x" ] ; then
- echo "INTERNAL ERROR: version_check was not provided a minimum version"
- exit 1
- fi
- _min="$1"
- if [ "x$2" = "x" ] ; then
- echo "INTERNAL ERROR: version check was not provided a comparison version"
- exit 1
+# Usage:
+# check_m4macros
+# Checks that all the requested macro files are in the aclocal macro path
+# Uses REQUIRED_M4MACROS and ACLOCAL variables.
+check_m4macros() {
+ # construct list of macro directories
+ cm_macrodirs=`$ACLOCAL --print-ac-dir`
+ # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
+ # but it contains only Automake's own macros, so we can ignore it.
+
+ # Read the dirlist file, supported by Automake >= 1.7.
+ # If AUTOMAKE was defined, no version was detected.
+ if [ -z "$AUTOMAKE_VERSION" ] || compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
+ cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
+ if [ -n "$cm_dirlist" ] ; then
+ for cm_dir in $cm_dirlist; do
+ if [ -d $cm_dir ]; then
+ add_to_cm_macrodirs $cm_dir
+ fi
+ done
+ fi
fi
- _cur="$2"
-
- # needed to handle versions like 1.10 and 1.4-p6
- _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
- _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
- _min_major="`echo $_min | cut -d. -f1`"
- _min_minor="`echo $_min | cut -d. -f2`"
- _min_patch="`echo $_min | cut -d. -f3`"
-
- _cur_major="`echo $_cur | cut -d. -f1`"
- _cur_minor="`echo $_cur | cut -d. -f2`"
- _cur_patch="`echo $_cur | cut -d. -f3`"
+ # Parse $ACLOCAL_FLAGS
+ set - $ACLOCAL_FLAGS
+ while [ $# -gt 0 ]; do
+ if [ "$1" = "-I" ]; then
+ add_to_cm_macrodirs "$2"
+ shift
+ fi
+ shift
+ done
- if [ "x$_min_major" = "x" ] ; then
- _min_major=0
- fi
- if [ "x$_min_minor" = "x" ] ; then
- _min_minor=0
- fi
- if [ "x$_min_patch" = "x" ] ; then
- _min_patch=0
- fi
- if [ "x$_cur_minor" = "x" ] ; then
- _cur_major=0
- fi
- if [ "x$_cur_minor" = "x" ] ; then
- _cur_minor=0
- fi
- if [ "x$_cur_patch" = "x" ] ; then
- _cur_patch=0
+ cm_status=0
+ if [ -n "$REQUIRED_M4MACROS" ]; then
+ printbold "Checking for required M4 macros..."
+ # check that each macro file is in one of the macro dirs
+ for cm_macro in $REQUIRED_M4MACROS; do
+ cm_macrofound=false
+ for cm_dir in $cm_macrodirs; do
+ if [ -f "$cm_dir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ # The macro dir in Cygwin environments may contain a file
+ # called dirlist containing other directories to look in.
+ if [ -f "$cm_dir/dirlist" ]; then
+ for cm_otherdir in `cat $cm_dir/dirlist`; do
+ if [ -f "$cm_otherdir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ done
+ fi
+ done
+ if $cm_macrofound; then
+ :
+ else
+ printerr " $cm_macro not found"
+ cm_status=1
+ fi
+ done
fi
-
- $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}"
-
- if [ $_min_major -lt $_cur_major ] ; then
- return 0
- elif [ $_min_major -eq $_cur_major ] ; then
- if [ $_min_minor -lt $_cur_minor ] ; then
- return 0
- elif [ $_min_minor -eq $_cur_minor ] ; then
- if [ $_min_patch -lt $_cur_patch ] ; then
- return 0
- elif [ $_min_patch -eq $_cur_patch ] ; then
- return 0
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
+ fi
+ if [ -n "$FORBIDDEN_M4MACROS" ]; then
+ printbold "Checking for forbidden M4 macros..."
+ # check that each macro file is in one of the macro dirs
+ for cm_macro in $FORBIDDEN_M4MACROS; do
+ cm_macrofound=false
+ for cm_dir in $cm_macrodirs; do
+ if [ -f "$cm_dir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ done
+ if $cm_macrofound; then
+ printerr " $cm_macro found (should be cleared from macros dir)"
+ cm_status=1
fi
- fi
+ done
fi
- return 1
-}
-
-
-######################################
-# LOCATE_CONFIGURE_TEMPLATE FUNCTION #
-######################################
-locate_configure_template ( ) {
- _pwd="`pwd`"
- if test -f "./configure.ac" ; then
- echo "./configure.ac"
- elif test -f "./configure.in" ; then
- echo "./configure.in"
- elif test -f "$_pwd/configure.ac" ; then
- echo "$_pwd/configure.ac"
- elif test -f "$_pwd/configure.in" ; then
- echo "$_pwd/configure.in"
- elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then
- echo "$PATH_TO_AUTOGEN/configure.ac"
- elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then
- echo "$PATH_TO_AUTOGEN/configure.in"
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
fi
}
+# try to catch the case where the macros2/ directory hasn't been cleared out.
+forbid_m4macro gnome-cxx-check.m4
-##################
-# argument check #
-##################
-ARGS="$*"
-PATH_TO_AUTOGEN="`dirname $0`"
-NAME_OF_AUTOGEN="`basename $0`"
-AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN"
-
-LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4"
-
-if [ "x$HELP" = "x" ] ; then
- HELP=no
-fi
-if [ "x$QUIET" = "x" ] ; then
- QUIET=no
-fi
-if [ "x$VERBOSE" = "x" ] ; then
- VERBOSE=no
-fi
-if [ "x$VERSION_ONLY" = "x" ] ; then
- VERSION_ONLY=no
-fi
-if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then
- AUTORECONF_OPTIONS="-i -f"
-fi
-if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then
- AUTOCONF_OPTIONS="-f"
-fi
-if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then
- AUTOMAKE_OPTIONS="-a -c -f"
-fi
-ALT_AUTOMAKE_OPTIONS="-a -c"
-if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then
- LIBTOOLIZE_OPTIONS="--automake -c -f"
-fi
-ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force"
-if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then
- ACLOCAL_OPTIONS=""
-fi
-if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then
- AUTOHEADER_OPTIONS=""
-fi
-for arg in $ARGS ; do
- case "x$arg" in
- x--help) HELP=yes ;;
- x-[hH]) HELP=yes ;;
- x--quiet) QUIET=yes ;;
- x-[qQ]) QUIET=yes ;;
- x--verbose) VERBOSE=yes ;;
- x-[vV]) VERBOSE=yes ;;
- x--version) VERSION_ONLY=yes ;;
- *)
- echo "Unknown option: $arg"
- echo
- usage
- exit 1
- ;;
- esac
-done
-
-
-#####################
-# environment check #
-#####################
+want_libtool=false
+want_gettext=false
+want_glib_gettext=false
+want_intltool=false
+want_pkg_config=false
+want_gtk_doc=false
+want_gnome_doc_utils=false
-# sanity check before recursions potentially begin
-if [ ! -f "$AUTOGEN_SH" ] ; then
- echo "INTERNAL ERROR: $AUTOGEN_SH does not exist"
- if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then
- echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH"
+configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ continue
fi
- exit 1
-fi
-
-# force locale setting to C so things like date output as expected
-LC_ALL=C
-
-# commands that this script expects
-for __cmd in echo head tail pwd ; do
- echo "test" | $__cmd > /dev/null 2>&1
- if [ $? != 0 ] ; then
- echo "INTERNAL ERROR: '${__cmd}' command is required"
- exit 2
+ if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
+ grep "^LT_INIT" $configure_ac >/dev/null; then
+ want_libtool=true
fi
-done
-echo "test" | grep "test" > /dev/null 2>&1
-if test ! x$? = x0 ; then
- echo "INTERNAL ERROR: grep command is required"
- exit 1
-fi
-echo "test" | sed "s/test/test/" > /dev/null 2>&1
-if test ! x$? = x0 ; then
- echo "INTERNAL ERROR: sed command is required"
- exit 1
-fi
-
-
-# determine the behavior of echo
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-# determine the behavior of head
-case "x`echo 'head' | head -n 1 2>&1`" in
- *xhead*) HEAD_N="n " ;;
- *) HEAD_N="" ;;
-esac
-
-# determine the behavior of tail
-case "x`echo 'tail' | tail -n 1 2>&1`" in
- *xtail*) TAIL_N="n " ;;
- *) TAIL_N="" ;;
-esac
-
-VERBOSE_ECHO=:
-ECHO=:
-if [ "x$QUIET" = "xyes" ] ; then
- if [ "x$VERBOSE" = "xyes" ] ; then
- echo "Verbose output quelled by quiet option. Further output disabled."
+ if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
+ want_gettext=true
fi
-else
- ECHO=echo
- if [ "x$VERBOSE" = "xyes" ] ; then
- echo "Verbose output enabled"
- VERBOSE_ECHO=echo
+ if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
+ want_glib_gettext=true
fi
-fi
-
-
-# allow a recursive run to disable further recursions
-if [ "x$RUN_RECURSIVE" = "x" ] ; then
- RUN_RECURSIVE=yes
-fi
-
-
-################################################
-# check for help arg and bypass version checks #
-################################################
-if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then
- HELP=yes
-fi
-if [ "x$HELP" = "xyes" ] ; then
- usage
- $ECHO "---"
- $ECHO "Help was requested. No preparation or configuration will be performed."
- exit 0
-fi
-
-
-#######################
-# set up signal traps #
-#######################
-untrap_abnormal ( ) {
- for sig in 1 2 13 15; do
- trap - $sig
- done
-}
-
-# do this cleanup whenever we exit.
-trap '
- # start from the root
- if test -d "$START_PATH" ; then
- cd "$START_PATH"
+ if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
+ want_intltool=true
fi
-
- # restore/delete backup files
- if test "x$PFC_INIT" = "x1" ; then
- recursive_restore
+ if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
+ want_pkg_config=true
fi
-' 0
-
-# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15)
-for sig in 1 2 13 15; do
- trap '
- $ECHO ""
- $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'"
-
- # start from the root
- if test -d "$START_PATH" ; then
- cd "$START_PATH"
- fi
-
- # clean up on abnormal exit
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
-
- if test -f "acinclude.m4.$$.backup" ; then
- $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4"
- chmod u+w acinclude.m4
- cat acinclude.m4.$$.backup > acinclude.m4
-
- $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup"
- rm -f acinclude.m4.$$.backup
- fi
-
- { (exit 1); exit 1; }
-' $sig
-done
-
-
-#############################
-# look for a configure file #
-#############################
-if [ "x$CONFIGURE" = "x" ] ; then
- CONFIGURE="`locate_configure_template`"
- if [ ! "x$CONFIGURE" = "x" ] ; then
- $VERBOSE_ECHO "Found a configure template: $CONFIGURE"
+ if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
+ want_gtk_doc=true
fi
-else
- $ECHO "Using CONFIGURE environment variable override: $CONFIGURE"
-fi
-if [ "x$CONFIGURE" = "x" ] ; then
- if [ "x$VERSION_ONLY" = "xyes" ] ; then
- CONFIGURE=/dev/null
- else
- $ECHO
- $ECHO "A configure.ac or configure.in file could not be located implying"
- $ECHO "that the GNU Build System is at least not used in this directory. In"
- $ECHO "any case, there is nothing to do here without one of those files."
- $ECHO
- $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
- exit 1
+ if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
+ want_gnome_doc_utils=true
fi
-fi
-####################
-# get project name #
-####################
-if [ "x$PROJECT" = "x" ] ; then
- PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if [ "x$PROJECT" = "xAC_INIT" ] ; then
- # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead
- PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- fi
- if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then
- PROJECT="project"
+ # check to make sure gnome-common macros can be found ...
+ if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
+ grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
+ grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
+ require_m4macro gnome-common.m4
fi
- if [ "x$PROJECT" = "x" ] ; then
- PROJECT="project"
+ if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
+ grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
+ require_m4macro gnome-compiler-flags.m4
fi
-else
- $ECHO "Using PROJECT environment variable override: $PROJECT"
-fi
-$ECHO "Preparing the $PROJECT build system...please wait"
-$ECHO
+done
+#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
+WANT_AUTOCONF_2_5=1
+export WANT_AUTOCONF_2_5
+version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
+ "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz"
+AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
+
+case $REQUIRED_AUTOMAKE_VERSION in
+ 1.4*) automake_progs="automake-1.4" ;;
+ 1.5*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
+ 1.6*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
+ 1.7*) automake_progs="automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
+ 1.8*) automake_progs="automake-1.10 automake-1.9 automake-1.8" ;;
+ 1.9*) automake_progs="automake-1.10 automake-1.9" ;;
+ 1.10*) automake_progs="automake-1.10" ;;
+esac
+version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
+ "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz"
+ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
-########################
-# check for autoreconf #
-########################
-HAVE_AUTORECONF=no
-if [ "x$AUTORECONF" = "x" ] ; then
- for AUTORECONF in autoreconf ; do
- $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version"
- $AUTORECONF --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- HAVE_AUTORECONF=yes
- break
- fi
- done
-else
- HAVE_AUTORECONF=yes
- $ECHO "Using AUTORECONF environment variable override: $AUTORECONF"
+if $want_libtool; then
+ version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
+ "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz"
+ require_m4macro libtool.m4
fi
-
-##########################
-# autoconf version check #
-##########################
-_acfound=no
-if [ "x$AUTOCONF" = "x" ] ; then
- for AUTOCONF in autoconf ; do
- $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version"
- $AUTOCONF --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- _acfound=yes
- break
- fi
- done
-else
- _acfound=yes
- $ECHO "Using AUTOCONF environment variable override: $AUTOCONF"
+if $want_gettext; then
+ version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
+ "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz"
+ require_m4macro gettext.m4
fi
-_report_error=no
-if [ ! "x$_acfound" = "xyes" ] ; then
- $ECHO "ERROR: Unable to locate GNU Autoconf."
- _report_error=yes
-else
- _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Autoconf version $_version"
- version_check "$AUTOCONF_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$AUTOCONF_VERSION" "GNU Autoconf"
- exit 1
+if $want_glib_gettext; then
+ version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
+ "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
+ require_m4macro glib-gettext.m4
fi
-
-##########################
-# automake version check #
-##########################
-_amfound=no
-if [ "x$AUTOMAKE" = "x" ] ; then
- for AUTOMAKE in automake ; do
- $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version"
- $AUTOMAKE --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- _amfound=yes
- break
- fi
- done
-else
- _amfound=yes
- $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE"
+if $want_intltool; then
+ version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
+ require_m4macro intltool.m4
fi
-
-_report_error=no
-if [ ! "x$_amfound" = "xyes" ] ; then
- $ECHO
- $ECHO "ERROR: Unable to locate GNU Automake."
- _report_error=yes
-else
- _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Automake version $_version"
- version_check "$AUTOMAKE_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$AUTOMAKE_VERSION" "GNU Automake"
- exit 1
+if $want_pkg_config; then
+ version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
+ "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
+ require_m4macro pkg.m4
fi
-
-########################
-# check for libtoolize #
-########################
-HAVE_LIBTOOLIZE=yes
-HAVE_ALT_LIBTOOLIZE=no
-_ltfound=no
-if [ "x$LIBTOOLIZE" = "x" ] ; then
- LIBTOOLIZE=libtoolize
- $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version"
- $LIBTOOLIZE --version > /dev/null 2>&1
- if [ ! $? = 0 ] ; then
- HAVE_LIBTOOLIZE=no
- $ECHO
- if [ "x$HAVE_AUTORECONF" = "xno" ] ; then
- $ECHO "Warning: libtoolize does not appear to be available."
- else
- $ECHO "Warning: libtoolize does not appear to be available. This means that"
- $ECHO "the automatic build preparation via autoreconf will probably not work."
- $ECHO "Preparing the build by running each step individually, however, should"
- $ECHO "work and will be done automatically for you if autoreconf fails."
- fi
-
- # look for some alternates
- for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do
- $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version"
- _glibtoolize="`$tool --version > /dev/null 2>&1`"
- if [ $? = 0 ] ; then
- $VERBOSE_ECHO "Found $tool --version"
- _glti="`which $tool`"
- if [ "x$_glti" = "x" ] ; then
- $VERBOSE_ECHO "Cannot find $tool with which"
- continue;
- fi
- if test ! -f "$_glti" ; then
- $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file"
- continue;
- fi
- _gltidir="`dirname $_glti`"
- if [ "x$_gltidir" = "x" ] ; then
- $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti"
- continue;
- fi
- if test ! -d "$_gltidir" ; then
- $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory"
- continue;
- fi
- HAVE_ALT_LIBTOOLIZE=yes
- LIBTOOLIZE="$tool"
- $ECHO
- $ECHO "Fortunately, $tool was found which means that your system may simply"
- $ECHO "have a non-standard or incomplete GNU Autotools install. If you have"
- $ECHO "sufficient system access, it may be possible to quell this warning by"
- $ECHO "running:"
- $ECHO
- sudo -V > /dev/null 2>&1
- if [ $? = 0 ] ; then
- $ECHO " sudo ln -s $_glti $_gltidir/libtoolize"
- $ECHO
- else
- $ECHO " ln -s $_glti $_gltidir/libtoolize"
- $ECHO
- $ECHO "Run that as root or with proper permissions to the $_gltidir directory"
- $ECHO
- fi
- _ltfound=yes
- break
- fi
- done
- else
- _ltfound=yes
- fi
-else
- _ltfound=yes
- $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE"
+if $want_gtk_doc; then
+ version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/"
+ require_m4macro gtk-doc.m4
fi
-
-############################
-# libtoolize version check #
-############################
-_report_error=no
-if [ ! "x$_ltfound" = "xyes" ] ; then
- $ECHO
- $ECHO "ERROR: Unable to locate GNU Libtool."
- _report_error=yes
-else
- _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Libtool version $_version"
- version_check "$LIBTOOL_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$LIBTOOL_VERSION" "GNU Libtool"
- exit 1
+if $want_gnome_doc_utils; then
+ version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/"
fi
-
-#####################
-# check for aclocal #
-#####################
-if [ "x$ACLOCAL" = "x" ] ; then
- for ACLOCAL in aclocal ; do
- $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version"
- $ACLOCAL --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- break
- fi
- done
-else
- $ECHO "Using ACLOCAL environment variable override: $ACLOCAL"
-fi
-
-
-########################
-# check for autoheader #
-########################
-if [ "x$AUTOHEADER" = "x" ] ; then
- for AUTOHEADER in autoheader ; do
- $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version"
- $AUTOHEADER --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- break
- fi
- done
-else
- $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER"
+if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
+ version_check gnome-common DOC_COMMON gnome-doc-common \
+ $REQUIRED_DOC_COMMON_VERSION " "
fi
+check_m4macros
-#########################
-# check if version only #
-#########################
-$VERBOSE_ECHO "Checking whether to only output version information"
-if [ "x$VERSION_ONLY" = "xyes" ] ; then
- $ECHO
- ident
- $ECHO "---"
- $ECHO "Version requested. No preparation or configuration will be performed."
- exit 0
+if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
+ printerr "**Warning**: I am going to run \`configure' with no arguments."
+ printerr "If you wish to pass any to it, please specify them on the"
+ printerr \`$0\'" command line."
+ printerr
fi
-
-#################################
-# PROTECT_FROM_CLOBBER FUNCTION #
-#################################
-protect_from_clobber ( ) {
- PFC_INIT=1
-
- # protect COPYING & INSTALL from overwrite by automake. the
- # automake force option will (inappropriately) ignore the existing
- # contents of a COPYING and/or INSTALL files (depending on the
- # version) instead of just forcing *missing* files like it does
- # for AUTHORS, NEWS, and README. this is broken but extremely
- # prevalent behavior, so we protect against it by keeping a backup
- # of the file that can later be restored.
-
- if test -f COPYING ; then
- if test -f COPYING.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "Already backed up COPYING in `pwd`"
- else
- $VERBOSE_ECHO "Backing up COPYING in `pwd`"
- $VERBOSE_ECHO "cp -p COPYING COPYING.$$.protect_from_automake.backup"
- cp -p COPYING COPYING.$$.protect_from_automake.backup
- fi
- fi
- if test -f INSTALL ; then
- if test -f INSTALL.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "Already backed up INSTALL in `pwd`"
- else
- $VERBOSE_ECHO "Backing up INSTALL in `pwd`"
- $VERBOSE_ECHO "cp -p INSTALL INSTALL.$$.protect_from_automake.backup"
- cp -p INSTALL INSTALL.$$.protect_from_automake.backup
- fi
- fi
-}
-
-
-##############################
-# RECURSIVE_PROTECT FUNCTION #
-##############################
-recursive_protect ( ) {
-
- # for projects using recursive configure, run the build
- # preparation steps for the subdirectories. this function assumes
- # START_PATH was set to pwd before recursion begins so that
- # relative paths work.
-
- # git 'r done, protect COPYING and INSTALL from being clobbered
- protect_from_clobber
-
- if test -d autom4te.cache ; then
- $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
- fi
-
- # find configure template
- _configure="`locate_configure_template`"
- if [ "x$_configure" = "x" ] ; then
- return
- fi
- # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure"
-
- # look for subdirs
- # $VERBOSE_ECHO "Looking for subdirs in `pwd`"
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- CHECK_DIRS=""
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
- fi
- done
-
- # process subdirs
- if [ ! "x$CHECK_DIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively scanning the following directories:"
- $VERBOSE_ECHO " $CHECK_DIRS"
- for dir in $CHECK_DIRS ; do
- $VERBOSE_ECHO "Protecting files from automake in $dir"
- cd "$START_PATH"
- eval "cd $dir"
-
- # recursively git 'r done
- recursive_protect
- done
- fi
-} # end of recursive_protect
-
-
-#############################
-# RESTORE_CLOBBERED FUNCION #
-#############################
-restore_clobbered ( ) {
-
- # The automake (and autoreconf by extension) -f/--force-missing
- # option may overwrite COPYING and INSTALL even if they do exist.
- # Here we restore the files if necessary.
-
- spacer=no
-
- # COPYING
- if test -f COPYING.$$.protect_from_automake.backup ; then
- if test -f COPYING ; then
- # compare entire content, restore if needed
- if test "x`cat COPYING`" != "x`cat COPYING.$$.protect_from_automake.backup`" ; then
- if test "x$spacer" = "xno" ; then
- $VERBOSE_ECHO
- spacer=yes
- fi
- # restore the backup
- $VERBOSE_ECHO "Restoring COPYING from backup (automake -f likely clobbered it)"
- $VERBOSE_ECHO "rm -f COPYING"
- rm -f COPYING
- $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
- mv COPYING.$$.protect_from_automake.backup COPYING
- fi # check contents
- elif test -f COPYING.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "mv COPYING.$$.protect_from_automake.backup COPYING"
- mv COPYING.$$.protect_from_automake.backup COPYING
- fi # -f COPYING
-
- # just in case
- $VERBOSE_ECHO "rm -f COPYING.$$.protect_from_automake.backup"
- rm -f COPYING.$$.protect_from_automake.backup
- fi # -f COPYING.$$.protect_from_automake.backup
-
- # INSTALL
- if test -f INSTALL.$$.protect_from_automake.backup ; then
- if test -f INSTALL ; then
- # compare entire content, restore if needed
- if test "x`cat INSTALL`" != "x`cat INSTALL.$$.protect_from_automake.backup`" ; then
- if test "x$spacer" = "xno" ; then
- $VERBOSE_ECHO
- spacer=yes
- fi
- # restore the backup
- $VERBOSE_ECHO "Restoring INSTALL from backup (automake -f likely clobbered it)"
- $VERBOSE_ECHO "rm -f INSTALL"
- rm -f INSTALL
- $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
- mv INSTALL.$$.protect_from_automake.backup INSTALL
- fi # check contents
- elif test -f INSTALL.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "mv INSTALL.$$.protect_from_automake.backup INSTALL"
- mv INSTALL.$$.protect_from_automake.backup INSTALL
- fi # -f INSTALL
-
- # just in case
- $VERBOSE_ECHO "rm -f INSTALL.$$.protect_from_automake.backup"
- rm -f INSTALL.$$.protect_from_automake.backup
- fi # -f INSTALL.$$.protect_from_automake.backup
-
- CONFIGURE="`locate_configure_template`"
- if [ "x$CONFIGURE" = "x" ] ; then
- return
- fi
-
- _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if test ! -d "$_aux_dir" ; then
- _aux_dir=.
- fi
-
- for file in config.guess config.sub ltmain.sh ; do
- if test -f "${_aux_dir}/${file}" ; then
- $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\""
- rm -f "${_aux_dir}/${file}.backup"
- fi
- done
-} # end of restore_clobbered
-
-
-##############################
-# RECURSIVE_RESTORE FUNCTION #
-##############################
-recursive_restore ( ) {
-
- # restore COPYING and INSTALL from backup if they were clobbered
- # for each directory recursively.
-
- # git 'r undone
- restore_clobbered
-
- # find configure template
- _configure="`locate_configure_template`"
- if [ "x$_configure" = "x" ] ; then
- return
- fi
-
- # look for subdirs
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- CHECK_DIRS=""
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
- fi
- done
-
- # process subdirs
- if [ ! "x$CHECK_DIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively scanning the following directories:"
- $VERBOSE_ECHO " $CHECK_DIRS"
- for dir in $CHECK_DIRS ; do
- $VERBOSE_ECHO "Checking files for automake damage in $dir"
- cd "$START_PATH"
- eval "cd $dir"
-
- # recursively git 'r undone
- recursive_restore
- done
- fi
-} # end of recursive_restore
-
-
-#######################
-# INITIALIZE FUNCTION #
-#######################
-initialize ( ) {
-
- # this routine performs a variety of directory-specific
- # initializations. some are sanity checks, some are preventive,
- # and some are necessary setup detection.
- #
- # this function sets:
- # CONFIGURE
- # SEARCH_DIRS
- # CONFIG_SUBDIRS
-
- ##################################
- # check for a configure template #
- ##################################
- CONFIGURE="`locate_configure_template`"
- if [ "x$CONFIGURE" = "x" ] ; then
- $ECHO
- $ECHO "A configure.ac or configure.in file could not be located implying"
- $ECHO "that the GNU Build System is at least not used in this directory. In"
- $ECHO "any case, there is nothing to do here without one of those files."
- $ECHO
- $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
- exit 1
- fi
-
- #####################
- # detect an aux dir #
- #####################
- _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if test ! -d "$_aux_dir" ; then
- _aux_dir=.
+topdir=`pwd`
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ basename=`basename $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ elif [ ! -w $dirname ]; then
+ echo skipping $dirname -- directory is read only
else
- $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir"
- fi
-
- ################################
- # detect a recursive configure #
- ################################
- CONFIG_SUBDIRS=""
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir"
- CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir"
+ printbold "Processing $configure_ac"
+ cd $dirname
+
+ # Note that the order these tools are called should match what
+ # autoconf's "autoupdate" package does. See bug 138584 for
+ # details.
+
+ # programs that might install new macros get run before aclocal
+ if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
+ grep "^LT_INIT" $basename >/dev/null; then
+ printbold "Running $LIBTOOLIZE..."
+ $LIBTOOLIZE --force --copy || exit 1
fi
- done
- ##########################################
- # make sure certain required files exist #
- ##########################################
- for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do
- if test ! -f $file ; then
- $VERBOSE_ECHO "Touching ${file} since it does not exist"
- touch $file
+ if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
+ printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
+ echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
+ elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
+ if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
+ printbold "Running autopoint..."
+ autopoint --force || exit 1
+ else
+ printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
+ echo "no" | $GETTEXTIZE --force --copy || exit 1
+ fi
fi
- done
-
- ##################################################
- # make sure certain generated files do not exist #
- ##################################################
- for file in config.guess config.sub ltmain.sh ; do
- if test -f "${_aux_dir}/${file}" ; then
- $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\""
- mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup"
- fi
- done
- ############################
- # search alternate m4 dirs #
- ############################
- SEARCH_DIRS=""
- for dir in m4 ; do
- if [ -d $dir ] ; then
- $VERBOSE_ECHO "Found extra aclocal search directory: $dir"
- SEARCH_DIRS="$SEARCH_DIRS -I $dir"
+ if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
+ printbold "Running $INTLTOOLIZE..."
+ $INTLTOOLIZE --force --copy --automake || exit 1
fi
- done
-
- ######################################
- # remove any previous build products #
- ######################################
- if test -d autom4te.cache ; then
- $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
- fi
-# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it
-# if test -f aclocal.m4 ; then
-# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it"
-# $VERBOSE_ECHO "rm -f aclocal.m4"
-# rm -f aclocal.m4
-# fi
-
-} # end of initialize()
-
-
-##############
-# initialize #
-##############
-
-# stash path
-START_PATH="`pwd`"
-
-# Before running autoreconf or manual steps, some prep detection work
-# is necessary or useful. Only needs to occur once per directory, but
-# does need to traverse the entire subconfigure hierarchy to protect
-# files from being clobbered even by autoreconf.
-recursive_protect
-
-# start from where we started
-cd "$START_PATH"
-
-# get ready to process
-initialize
-
-
-############################################
-# prepare build via autoreconf or manually #
-############################################
-reconfigure_manually=no
-if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then
- $ECHO
- $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C"
-
- $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS"
- autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoreconf_output"
-
- if [ ! $ret = 0 ] ; then
- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
- if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then
- $ECHO
- $ECHO "Warning: autoreconf failed but due to what is usually a common libtool"
- $ECHO "misconfiguration issue. This problem is encountered on systems that"
- $ECHO "have installed libtoolize under a different name without providing a"
- $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable."
- $ECHO
- $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE"
-
- export LIBTOOLIZE
- RUN_RECURSIVE=no
- export RUN_RECURSIVE
- untrap_abnormal
-
- $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- exit $?
- fi
+ if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
+ printbold "Running $GTKDOCIZE..."
+ $GTKDOCIZE --copy || exit 1
fi
- $ECHO "Warning: $AUTORECONF failed"
-
- if test -f ltmain.sh ; then
- $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should"
+ if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
+ printbold "Running gnome-doc-common..."
+ gnome-doc-common --copy || exit 1
fi
-
- $ECHO "Attempting to run the preparation steps individually"
- reconfigure_manually=yes
- fi
-else
- reconfigure_manually=yes
-fi
-
-
-############################
-# LIBTOOL_FAILURE FUNCTION #
-############################
-libtool_failure ( ) {
-
- # libtool is rather error-prone in comparison to the other
- # autotools and this routine attempts to compensate for some
- # common failures. the output after a libtoolize failure is
- # parsed for an error related to AC_PROG_LIBTOOL and if found, we
- # attempt to inject a project-provided libtool.m4 file.
-
- _autoconf_output="$1"
-
- if [ "x$RUN_RECURSIVE" = "xno" ] ; then
- # we already tried the libtool.m4, don't try again
- return 1
- fi
-
- if test -f "$LIBTOOL_M4" ; then
- found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`"
- if test ! "x$found_libtool" = "x" ; then
- if test -f acinclude.m4 ; then
- rm -f acinclude.m4.$$.backup
- $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup"
- cat acinclude.m4 > acinclude.m4.$$.backup
- fi
- $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4"
- chmod u+w acinclude.m4
- cat "$LIBTOOL_M4" >> acinclude.m4
-
- # don't keep doing this
- RUN_RECURSIVE=no
- export RUN_RECURSIVE
- untrap_abnormal
-
- $ECHO
- $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4"
- $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- exit $?
+ if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
+ printbold "Running $GNOME_DOC_PREPARE..."
+ $GNOME_DOC_PREPARE --force --copy || exit 1
fi
- fi
-}
-
-###########################
-# MANUAL_AUTOGEN FUNCTION #
-###########################
-manual_autogen ( ) {
+ # Now run aclocal to pull in any additional macros needed
- ##################################################
- # Manual preparation steps taken are as follows: #
- # aclocal [-I m4] #
- # libtoolize --automake -c -f #
- # aclocal [-I m4] #
- # autoconf -f #
- # autoheader #
- # automake -a -c -f #
- ##################################################
-
- ###########
- # aclocal #
- ###########
- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
- aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$aclocal_output"
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi
-
- ##############
- # libtoolize #
- ##############
- need_libtoolize=no
- for feature in AC_PROG_LIBTOOL LT_INIT ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_libtoolize=yes
- break
- fi
- done
- if [ "x$need_libtoolize" = "xyes" ] ; then
- if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then
- $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS"
- libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$libtoolize_output"
-
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
- else
- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
- $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS"
- libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$libtoolize_output"
-
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
- fi
+ # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
+ # directory to aclocal.
+ m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+ if [ -n "$m4dir" ]; then
+ m4dir="-I $m4dir"
fi
+ printbold "Running $ACLOCAL..."
+ $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
- ###########
- # aclocal #
- ###########
- # re-run again as instructed by libtoolize
- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
- aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$aclocal_output"
-
- # libtoolize might put ltmain.sh in the wrong place
- if test -f ltmain.sh ; then
- if test ! -f "${_aux_dir}/ltmain.sh" ; then
- $ECHO
- $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory"
- $ECHO
- $ECHO "Fortunately, the problem can be worked around by simply copying the"
- $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you."
- $ECHO
- $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\""
- cp -p ltmain.sh "${_aux_dir}/ltmain.sh"
- $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
- fi
- fi # ltmain.sh
- fi # need_libtoolize
-
- ############
- # autoconf #
- ############
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS"
- autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoconf_output"
-
- if [ ! $ret = 0 ] ; then
- # retry without the -f and check for usage of macros that are too new
- ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE"
- ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE"
- ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T"
-
- macros_to_search=""
- ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`"
- ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`"
-
- if [ $ac_major -lt 2 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
- else
- if [ $ac_minor -lt 54 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
- elif [ $ac_minor -lt 55 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros"
- elif [ $ac_minor -lt 59 ] ; then
- macros_to_search="$ac2_59_macros"
- fi
+ if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
+ printerr "*** obsolete gnome macros were used in $configure_ac"
fi
- configure_ac_macros=__none__
- for feature in $macros_to_search ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- if [ "x$configure_ac_macros" = "x__none__" ] ; then
- configure_ac_macros="$feature"
- else
- configure_ac_macros="$feature $configure_ac_macros"
- fi
- fi
- done
- if [ ! "x$configure_ac_macros" = "x__none__" ] ; then
- $ECHO
- $ECHO "Warning: Unsupported macros were found in $CONFIGURE"
- $ECHO
- $ECHO "The `echo $CONFIGURE | basename` file was scanned in order to determine if any"
- $ECHO "unsupported macros are used that exceed the minimum version"
- $ECHO "settings specified within this file. As such, the following macros"
- $ECHO "should be removed from configure.ac or the version numbers in this"
- $ECHO "file should be increased:"
- $ECHO
- $ECHO "$configure_ac_macros"
- $ECHO
- $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C"
+ # Now that all the macros are sorted, run autoconf and autoheader ...
+ printbold "Running $AUTOCONF..."
+ $AUTOCONF || exit 1
+ if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
+ printbold "Running $AUTOHEADER..."
+ $AUTOHEADER || exit 1
+ # this prevents automake from thinking config.h.in is out of
+ # date, since autoheader doesn't touch the file if it doesn't
+ # change.
+ test -f config.h.in && touch config.h.in
fi
- ###################
- # autoconf, retry #
- ###################
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOCONF"
- autoconf_output="`$AUTOCONF 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoconf_output"
-
- if [ ! $ret = 0 ] ; then
- # test if libtool is busted
- libtool_failure "$autoconf_output"
-
- # let the user know what went wrong
- cat <<EOF
-$autoconf_output
-EOF
- $ECHO "ERROR: $AUTOCONF failed"
- exit 2
+ # Finally, run automake to create the makefiles ...
+ printbold "Running $AUTOMAKE..."
+ if [ -f COPYING ]; then
+ cp -pf COPYING COPYING.autogen_bak
+ fi
+ if [ -f INSTALL ]; then
+ cp -pf INSTALL INSTALL.autogen_bak
+ fi
+ if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
+ $AUTOMAKE --gnu --add-missing --force --copy || exit 1
else
- # autoconf sans -f and possibly sans unsupported options succeed so warn verbosely
- $ECHO
- $ECHO "Warning: autoconf seems to have succeeded by removing the following options:"
- $ECHO " AUTOCONF_OPTIONS=\"$AUTOCONF_OPTIONS\""
- $ECHO
- $ECHO "Removing those options should not be necessary and indicate some other"
- $ECHO "problem with the build system. The build preparation is highly suspect"
- $ECHO "and may result in configuration or compilation errors. Consider"
- if [ "x$VERBOSE_ECHO" = "x:" ] ; then
- $ECHO "rerunning the build preparation with verbose output enabled."
- $ECHO " $AUTOGEN_SH --verbose"
- else
- $ECHO "reviewing the minimum GNU Autotools version settings contained in"
- $ECHO "this script along with the macros being used in your `echo $CONFIGURE | basename` file."
- fi
- $ECHO
- $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
- fi # autoconf ret = 0
- fi # autoconf ret = 0
-
- ##############
- # autoheader #
- ##############
- need_autoheader=no
- for feature in AM_CONFIG_HEADER AC_CONFIG_HEADER ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_autoheader=yes
- break
- fi
- done
- if [ "x$need_autoheader" = "xyes" ] ; then
- $VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS"
- autoheader_output="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoheader_output"
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $AUTOHEADER failed" && exit 2 ; fi
- fi # need_autoheader
-
- ############
- # automake #
- ############
- need_automake=no
- for feature in AM_INIT_AUTOMAKE ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_automake=yes
- break
+ $AUTOMAKE --gnu --add-missing --copy || exit 1
fi
- done
-
- if [ "x$need_automake" = "xyes" ] ; then
- $VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS"
- automake_output="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$automake_output"
-
- if [ ! $ret = 0 ] ; then
-
- ###################
- # automake, retry #
- ###################
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOMAKE $ALT_AUTOMAKE_OPTIONS"
- # retry without the -f
- automake_output="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$automake_output"
-
- if [ ! $ret = 0 ] ; then
- # test if libtool is busted
- libtool_failure "$automake_output"
-
- # let the user know what went wrong
- cat <<EOF
-$automake_output
-EOF
- $ECHO "ERROR: $AUTOMAKE failed"
- exit 2
- fi # automake retry
- fi # automake ret = 0
- fi # need_automake
-} # end of manual_autogen
-
-
-#####################################
-# RECURSIVE_MANUAL_AUTOGEN FUNCTION #
-#####################################
-recursive_manual_autogen ( ) {
-
- # run the build preparation steps manually for this directory
- manual_autogen
-
- # for projects using recursive configure, run the build
- # preparation steps for the subdirectories.
- if [ ! "x$CONFIG_SUBDIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively configuring the following directories:"
- $VERBOSE_ECHO " $CONFIG_SUBDIRS"
- for dir in $CONFIG_SUBDIRS ; do
- $VERBOSE_ECHO "Processing recursive configure in $dir"
- cd "$START_PATH"
- cd "$dir"
-
- # new directory, prepare
- initialize
+ if [ -f COPYING.autogen_bak ]; then
+ cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
+ rm -f COPYING.autogen_bak
+ fi
+ if [ -f INSTALL.autogen_bak ]; then
+ cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
+ rm -f INSTALL.autogen_bak
+ fi
- # run manual steps for the subdir and any others below
- recursive_manual_autogen
- done
+ cd "$topdir"
fi
-}
-
-
-################################
-# run manual preparation steps #
-################################
-if [ "x$reconfigure_manually" = "xyes" ] ; then
- $ECHO
- $ECHO $ECHO_N "Preparing build ... $ECHO_C"
-
- recursive_manual_autogen
-fi
-
-
-#########################
-# restore and summarize #
-#########################
-cd "$START_PATH"
-
-# restore COPYING and INSTALL from backup if necessary
-recursive_restore
+done
-# make sure we end up with a configure script
-config_ac="`locate_configure_template`"
-config="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`"
-if [ "x$config" = "x" ] ; then
- $VERBOSE_ECHO "Could not locate the configure template (from `pwd`)"
-fi
+conf_flags="--enable-maintainer-mode"
-# summarize
-$ECHO "done"
-$ECHO
-if test "x$config" = "x" -o ! -f "$config" ; then
- $ECHO "WARNING: The $PROJECT build system should now be prepared but there"
- $ECHO "does not seem to be a resulting configure file. This is unexpected"
- $ECHO "and likely the result of an error. You should run $NAME_OF_AUTOGEN"
- $ECHO "with the --verbose option to get more details on a potential"
- $ECHO "misconfiguration."
+if test x$NOCONFIGURE = x; then
+ printbold Running $srcdir/configure $conf_flags "$@" ...
+ $srcdir/configure $conf_flags "$@" \
+ && echo Now type \`make\' to compile $PKG_NAME || exit 1
else
- $ECHO "The $PROJECT build system is now prepared. To build here, run:"
- $ECHO " $config"
- $ECHO " make"
+ echo Skipping configure process.
fi
-
-
-# Local Variables:
-# mode: sh
-# tab-width: 8
-# sh-basic-offset: 4
-# sh-indentation: 4
-# indent-tabs-mode: t
-# End:
-# ex: shiftwidth=4 tabstop=8
--- /dev/null
+/* Generated from , version 1.24.0
+
+
+
+ !\mainpage AT-SPI Interfaces and Subinterfaces
+
+ This is the main documentation page for the
+ Assistive Technology Service Provider Interface (AT-SPI).
+
+ \section apps Applications and Interface Components
+ Namespace Accessibility includes service APIs implemented by
+ participating applications and their user interface components:\n\n
+ Accessibility::Accessible\n
+ Accessibility::Application\n
+ Accessibility::Desktop\n
+ Accessibility::Collecgtion\n
+ Accessibility::Component\n
+ Accessibility::Hypertext\n
+ Accessibility::Image\n
+ Accessibility::Selection\n
+ Accessibility::StreamableContent\n
+ Accessibility::Table\n
+ Accessibility::Text\n
+ Accessibility::EditableText\n
+ Accessibility::Value
+
+ \section types Enumerated Types
+ Accessibility defines a number of key enumerated types, including:\n\n
+ Accessibility::RelationType\n
+ Accessibility::Role\n
+ Accessibility::StateType\n
+ Accessibility::Event\n
+ Accessibility::EventDetails \n
+
+ \section Registry
+ Accessibility also includes Accessibility::Registry,
+ which is the service used by assistive technologies and related
+ AT-SPI clients to register interest in certain classes of events,
+ enumerate the currently available desktop and application list,
+ and to synthesize certain kinds of device events.
+
+ \section listeners Event Listener Interfaces
+ Accessibility::EventListener\n
+ Accessibility::DeviceEventListener
+
+ \section helpers Helper Interfaces
+
+ The following interfaces may be implemented by assistive technologies
+ themselves, in order to export their services in a consistent manner or
+ in order to interoperate with other applications or desktop services.\n
+
+ Accessibility::LoginHelper : Implemented by adaptive technologies which
+ need to participate in user-authentication or login activities, and which
+ therefore may need negotiation with authentication agents or processes.\n
+
+ Accessibility::Selector [NEW]: Implemented by user agents or assistive
+ technologies which export lists of choices from which the end-user is
+ expected to make selections. Useful for various types of remote
+ activation or intercommunication between multiple ATs.
+
+ */
+
+#ifndef _ACCESSIBILITY_H_
+#define _ACCESSIBILITY_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *
+Accessibility_LOCALE_TYPE:
+ * @Accessibility_LOCALE_TYPE_MESSAGES: <![CDATA[]]>
+ * @Accessibility_LOCALE_TYPE_COLLATE: <![CDATA[]]>
+ * @Accessibility_LOCALE_TYPE_CTYPE: <![CDATA[]]>
+ * @Accessibility_LOCALE_TYPE_MONETARY: <![CDATA[]]>
+ * @Accessibility_LOCALE_TYPE_NUMERIC: <![CDATA[]]>
+ * @Accessibility_LOCALE_TYPE_TIME: <![CDATA[]]>
+ *
+ * <![CDATA[ Used by Text and Document interfaces these correspond to the POSIX 'setlocale' enum values. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_LOCALE_TYPE_MESSAGES,
+ Accessibility_LOCALE_TYPE_COLLATE,
+ Accessibility_LOCALE_TYPE_CTYPE,
+ Accessibility_LOCALE_TYPE_MONETARY,
+ Accessibility_LOCALE_TYPE_NUMERIC,
+ Accessibility_LOCALE_TYPE_TIME,
+} Accessibility_LOCALE_TYPE;
+
+/**
+ * NUM_ACCESSIBILITY_LOCALE_TYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_LOCALE_TYPE.
+ */
+#define NUM_ACCESSIBILITY_LOCALE_TYPES (5+1)
+
+/**
+ *
+Accessibility_Collection_SortOrder:
+ * @Accessibility_Collection_SORT_ORDER_INVALID: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_CANONICAL: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_FLOW: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_TAB: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_REVERSE_CANONICAL: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_REVERSE_FLOW: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_REVERSE_TAB: <![CDATA[]]>
+ * @Accessibility_Collection_SORT_ORDER_LAST_DEFINED: <![CDATA[]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_Collection_SORT_ORDER_INVALID,
+ Accessibility_Collection_SORT_ORDER_CANONICAL,
+ Accessibility_Collection_SORT_ORDER_FLOW,
+ Accessibility_Collection_SORT_ORDER_TAB,
+ Accessibility_Collection_SORT_ORDER_REVERSE_CANONICAL,
+ Accessibility_Collection_SORT_ORDER_REVERSE_FLOW,
+ Accessibility_Collection_SORT_ORDER_REVERSE_TAB,
+ Accessibility_Collection_SORT_ORDER_LAST_DEFINED,
+} Accessibility_Collection_SortOrder;
+
+/**
+ * NUM_ACCESSIBILITY_SORTORDERS:
+ *
+ * 1 higher than the highest valid value of #Accessibility_Collection_SortOrder.
+ */
+#define NUM_ACCESSIBILITY_SORTORDERS (7+1)
+
+/**
+ *
+Accessibility_Collection_MatchType:
+ * @Accessibility_Collection_MATCH_INVALID: <![CDATA[]]>
+ * @Accessibility_Collection_MATCH_ALL: <![CDATA[]]>
+ * @Accessibility_Collection_MATCH_ANY: <![CDATA[]]>
+ * @Accessibility_Collection_MATCH_NONE: <![CDATA[]]>
+ * @Accessibility_Collection_MATCH_EMPTY: <![CDATA[]]>
+ * @Accessibility_Collection_MATCH_LAST_DEFINED: <![CDATA[]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_Collection_MATCH_INVALID,
+ Accessibility_Collection_MATCH_ALL,
+ Accessibility_Collection_MATCH_ANY,
+ Accessibility_Collection_MATCH_NONE,
+ Accessibility_Collection_MATCH_EMPTY,
+ Accessibility_Collection_MATCH_LAST_DEFINED,
+} Accessibility_Collection_MatchType;
+
+/**
+ * NUM_ACCESSIBILITY_MATCHTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_Collection_MatchType.
+ */
+#define NUM_ACCESSIBILITY_MATCHTYPES (5+1)
+
+/**
+ *
+Accessibility_Collection_TreeTraversalType:
+ * @Accessibility_Collection_TREE_RESTRICT_CHILDREN: <![CDATA[]]>
+ * @Accessibility_Collection_TREE_RESTRICT_SIBLING: <![CDATA[]]>
+ * @Accessibility_Collection_TREE_INORDER: <![CDATA[]]>
+ * @Accessibility_Collection_TREE_LAST_DEFINED: <![CDATA[]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_Collection_TREE_RESTRICT_CHILDREN,
+ Accessibility_Collection_TREE_RESTRICT_SIBLING,
+ Accessibility_Collection_TREE_INORDER,
+ Accessibility_Collection_TREE_LAST_DEFINED,
+} Accessibility_Collection_TreeTraversalType;
+
+/**
+ * NUM_ACCESSIBILITY_TREETRAVERSALTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_Collection_TreeTraversalType.
+ */
+#define NUM_ACCESSIBILITY_TREETRAVERSALTYPES (3+1)
+
+/**
+ *
+Accessibility_ComponentLayer:
+ * @Accessibility_LAYER_INVALID: <![CDATA[ Indicates an error condition or uninitialized value. ]]>
+ * @Accessibility_LAYER_BACKGROUND: <![CDATA[ The bottom-most layer, over which everything else is painted. The 'desktop background' is generally in this layer. ]]>
+ * @Accessibility_LAYER_CANVAS: <![CDATA[ The 'background' layer for most content renderers and UI Component containers. ]]>
+ * @Accessibility_LAYER_WIDGET: <![CDATA[ The layer in which the majority of ordinary 'foreground' widgets reside. ]]>
+ * @Accessibility_LAYER_MDI: <![CDATA[ A special layer between LAYER_CANVAS and LAYER_WIDGET, in which the 'pseudo windows' (e.g. the MDI frames) reside. (See Component.getMDIZOrder) ]]>
+ * @Accessibility_LAYER_POPUP: <![CDATA[ A layer for popup window content, above LAYER_WIDGET. ]]>
+ * @Accessibility_LAYER_OVERLAY: <![CDATA[ The topmost layer. ]]>
+ * @Accessibility_LAYER_WINDOW: <![CDATA[ The layer in which a toplevel window background usually resides. ]]>
+ * @Accessibility_LAYER_LAST_DEFINED: <![CDATA[ Used only to determine the end of the enumeration. ]]>
+ *
+ * <![CDATA[ The ComponentLayer of a Component instance indicates its relative stacking order with respect to the onscreen visual representation of the UI. ComponentLayer, in combination with Component bounds information, can be used to compute the visibility of all or part of a component. This is important in programmatic determination of region-of-interest for magnification, and in ¨flat screen review¨ models of the screen, as well as for other uses. Objects residing in two of the ComponentLayer categories support further z-ordering information, with respect to their peers in the same layer: namely, LAYER_WINDOW and LAYER_MDI. Relative stacking order for other objects within the same layer is not available; the recommended heuristic is ¨first child paints first¨, in other words, assume that the first siblings in the child list are subject to being overpainted by later siblings if their bounds intersect. The order of layers, from bottom to top, is: LAYER_BACKGROUND LAYER_WINDOW LAYER_MDI LAYER_CANVAS LAYER_WIDGET LAYER_POPUP LAYER_OVERLAY ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_LAYER_INVALID,
+ Accessibility_LAYER_BACKGROUND,
+ Accessibility_LAYER_CANVAS,
+ Accessibility_LAYER_WIDGET,
+ Accessibility_LAYER_MDI,
+ Accessibility_LAYER_POPUP,
+ Accessibility_LAYER_OVERLAY,
+ Accessibility_LAYER_WINDOW,
+ Accessibility_LAYER_LAST_DEFINED,
+} Accessibility_ComponentLayer;
+
+/**
+ * NUM_ACCESSIBILITY_COMPONENTLAYERS:
+ *
+ * 1 higher than the highest valid value of #Accessibility_ComponentLayer.
+ */
+#define NUM_ACCESSIBILITY_COMPONENTLAYERS (8+1)
+
+/**
+ *
+Accessibility_SeekType:
+ * @Accessibility_SEEK_SET: <![CDATA[ Seek from the start of the stream or data source. ]]>
+ * @Accessibility_SEEK_CURRENT: <![CDATA[ Seek relative to the current position. ]]>
+ * @Accessibility_SEEK_END: <![CDATA[ Seek from the end of the file, stream, or data source. ]]>
+ *
+ * <![CDATA[ Specifies the meaning of a seek 'offset'. Not all SeekTypes are supported by all StreamableContent data sources, for instance some streams may not support seeking from the beginning or other types of 'backwards' seeks. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_SEEK_SET,
+ Accessibility_SEEK_CURRENT,
+ Accessibility_SEEK_END,
+} Accessibility_SeekType;
+
+/**
+ * NUM_ACCESSIBILITY_SEEKTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_SeekType.
+ */
+#define NUM_ACCESSIBILITY_SEEKTYPES (2+1)
+
+/**
+ *
+Accessibility_TEXT_BOUNDARY_TYPE:
+ * @Accessibility_TEXT_BOUNDARY_CHAR: <![CDATA[ Text is bounded by this character only. Start and end offsets differ by one, by definition, for this value. ]]>
+ * @Accessibility_TEXT_BOUNDARY_WORD_START: <![CDATA[ Boundary condition is start of a word; i.e. range is from start of one word to the start of another word. ]]>
+ * @Accessibility_TEXT_BOUNDARY_WORD_END: <![CDATA[ Boundary condition is the end of a word; i.e. range is from the end of one word to the end of another. Some locales may not distinguish between words and characters or glyphs, in particular those locales which use wholly or partially ideographic character sets. In these cases, characters may be returned in lieu of multi-character substrings. ]]>
+ * @Accessibility_TEXT_BOUNDARY_SENTENCE_START: <![CDATA[ Boundary condition is start of a sentence, as determined by the application. Some locales or character sets may not include explicit sentence delimiters, so this boundary type can not always be honored. Some locales will return lines of text instead of grammatical sentences. ]]>
+ * @Accessibility_TEXT_BOUNDARY_SENTENCE_END: <![CDATA[ Boundary condition is end of a sentence, as determined by the application, including the sentence-delimiting character, for instance '.' Some locales or character sets may not include explicit sentence delimiters, so this boundary type can not always be honored. Some locales will return lines of text instead of grammatical sentences. ]]>
+ * @Accessibility_TEXT_BOUNDARY_LINE_START: <![CDATA[ Boundary condition is the start of a line; i.e. range is from start of one line to the start of another. This generally means that an end-of-line character will appear at the end of the range. ]]>
+ * @Accessibility_TEXT_BOUNDARY_LINE_END: <![CDATA[ Boundary condition is the end of a line; i.e. range is from start of one line to the start of another. This generally means that an end-of-line character will be the first character of the range. ]]>
+ *
+ * <![CDATA[ Specifies the boundary conditions determining a run of text as returned from getTextAtOffset, getTextAfterOffset, and getTextBeforeOffset. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_TEXT_BOUNDARY_CHAR,
+ Accessibility_TEXT_BOUNDARY_WORD_START,
+ Accessibility_TEXT_BOUNDARY_WORD_END,
+ Accessibility_TEXT_BOUNDARY_SENTENCE_START,
+ Accessibility_TEXT_BOUNDARY_SENTENCE_END,
+ Accessibility_TEXT_BOUNDARY_LINE_START,
+ Accessibility_TEXT_BOUNDARY_LINE_END,
+} Accessibility_TEXT_BOUNDARY_TYPE;
+
+/**
+ * NUM_ACCESSIBILITY_TEXT_BOUNDARY_TYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_TEXT_BOUNDARY_TYPE.
+ */
+#define NUM_ACCESSIBILITY_TEXT_BOUNDARY_TYPES (6+1)
+
+/**
+ *
+Accessibility_TEXT_CLIP_TYPE:
+ * @Accessibility_TEXT_CLIP_NONE: <![CDATA[]]>
+ * @Accessibility_TEXT_CLIP_MIN: <![CDATA[ Characters/glyphs clipped by the minimum coordinate are omitted ]]>
+ * @Accessibility_TEXT_CLIP_MAX: <![CDATA[ Characters/glyphs which intersect the maximum coordinate are omitted ]]>
+ * @Accessibility_TEXT_CLIP_BOTH: <![CDATA[ Only glyphs falling entirely within the region bounded by min and max are retained. ]]>
+ *
+ * <![CDATA[ TEXT_CLIP_TYPE: CLIP_MIN means text clipped by min coordinate is omitted, CLIP_MAX clips text interescted by the max coord, and CLIP_BOTH will retain only text falling fully within the min/max bounds. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_TEXT_CLIP_NONE,
+ Accessibility_TEXT_CLIP_MIN,
+ Accessibility_TEXT_CLIP_MAX,
+ Accessibility_TEXT_CLIP_BOTH,
+} Accessibility_TEXT_CLIP_TYPE;
+
+/**
+ * NUM_ACCESSIBILITY_TEXT_CLIP_TYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_TEXT_CLIP_TYPE.
+ */
+#define NUM_ACCESSIBILITY_TEXT_CLIP_TYPES (3+1)
+
+/**
+ *
+Accessibility_StateType:
+ * @Accessibility_STATE_INVALID: <![CDATA[]]>
+ * @Accessibility_STATE_ACTIVE: <![CDATA[ Indicates a window is currently the active window, or is an active subelement within a container or table ]]>
+ * @Accessibility_STATE_ARMED: <![CDATA[ Indicates that the object is armed ]]>
+ * @Accessibility_STATE_BUSY: <![CDATA[ Indicates the current object is busy, i.e. onscreen representation is in the process of changing, or the object is temporarily unavailable for interaction due to activity already in progress. ]]>
+ * @Accessibility_STATE_CHECKED: <![CDATA[ Indicates this object is currently checked ]]>
+ * @Accessibility_STATE_COLLAPSED: <![CDATA[ Indicates this object is collapsed ]]>
+ * @Accessibility_STATE_DEFUNCT: <![CDATA[ Indicates that this object no longer has a valid backing widget (for instance, if its peer object has been destroyed) ]]>
+ * @Accessibility_STATE_EDITABLE: <![CDATA[ Indicates the user can change the contents of this object ]]>
+ * @Accessibility_STATE_ENABLED: <![CDATA[ Indicates that this object is enabled, i.e. that it currently reflects some application state. Objects that are "greyed out" may lack this state, and may lack the STATE_SENSITIVE if direct user interaction cannot cause them to acquire STATE_ENABLED. @see STATE_SENSITIVE. ]]>
+ * @Accessibility_STATE_EXPANDABLE: <![CDATA[ Indicates this object allows progressive disclosure of its children ]]>
+ * @Accessibility_STATE_EXPANDED: <![CDATA[ Indicates this object its expanded ]]>
+ * @Accessibility_STATE_FOCUSABLE: <![CDATA[ Indicates this object can accept keyboard focus, which means all events resulting from typing on the keyboard will normally be passed to it when it has focus ]]>
+ * @Accessibility_STATE_FOCUSED: <![CDATA[ Indicates this object currently has the keyboard focus ]]>
+ * @Accessibility_STATE_HAS_TOOLTIP: <![CDATA[ Indicates that the object has an associated tooltip ]]>
+ * @Accessibility_STATE_HORIZONTAL: <![CDATA[ Indicates the orientation of thsi object is horizontal ]]>
+ * @Accessibility_STATE_ICONIFIED: <![CDATA[ Indicates this object is minimized and is represented only by an icon ]]>
+ * @Accessibility_STATE_MODAL: <![CDATA[ Indicates something must be done with this object before the user can interact with an object in a different window. ]]>
+ * @Accessibility_STATE_MULTI_LINE: <![CDATA[ Indicates this (text) object can contain multiple lines of text ]]>
+ * @Accessibility_STATE_MULTISELECTABLE: <![CDATA[ Indicates this object allows more than one of its children to be selected at the same time, or in the case of text objects, that the object supports non-contiguous text selections. ]]>
+ * @Accessibility_STATE_OPAQUE: <![CDATA[ Indicates this object paints every pixel within its rectangular region. It also indicates an alpha value of unity, if it supports alpha blending. ]]>
+ * @Accessibility_STATE_PRESSED: <![CDATA[ Indicates this object is currently pressed ]]>
+ * @Accessibility_STATE_RESIZABLE: <![CDATA[ Indicates the size of this object's size is not fixed ]]>
+ * @Accessibility_STATE_SELECTABLE: <![CDATA[ Indicates this object is the child of an object that allows its children to be selected and that this child is one of those children that can be selected. ]]>
+ * @Accessibility_STATE_SELECTED: <![CDATA[ Indicates this object is the child of an object that allows its children to be selected and that this child is one of those children that has been selected. ]]>
+ * @Accessibility_STATE_SENSITIVE: <![CDATA[ Indicates this object is sensitive, e.g. to user interaction. STATE_SENSITIVE usually accompanies STATE_ENABLED for user-actionable controls, but may be found in the absence of STATE_ENABLED if the current visible state of the control is "disconnected" from the application state. In such cases, direct user interaction can often result in the object gaining STATE_SENSITIVE, for instance if a user makes an explicit selection using an object whose current state is ambiguous or undefined. @see STATE_ENABLED, STATE_INDETERMINATE. ]]>
+ * @Accessibility_STATE_SHOWING: <![CDATA[ Indicates this object, the object's parent, the object's parent's parent, and so on, are all 'shown' to the end-user, i.e. subject to "exposure" if blocking or obscuring objects do not interpose between this object and the top of the window stack. ]]>
+ * @Accessibility_STATE_SINGLE_LINE: <![CDATA[ Indicates this (text) object can contain only a single line of text ]]>
+ * @Accessibility_STATE_STALE: <![CDATA[ Indicates that the information returned for this object may no longer be synchronized with the application state. This can occur if the object has STATE_TRANSIENT, and can also occur towards the end of the object peer's lifecycle. ]]>
+ * @Accessibility_STATE_TRANSIENT: <![CDATA[ Indicates this object is transient ]]>
+ * @Accessibility_STATE_VERTICAL: <![CDATA[ Indicates the orientation of this object is vertical; for example this state may appear on such objects as scrollbars, text objects (with vertical text flow), separators, etc. ]]>
+ * @Accessibility_STATE_VISIBLE: <![CDATA[ Indicates this object is visible, e.g. has been explicitly marked for exposure to the user. STATE_VISIBLE is no guarantee that the object is actually unobscured on the screen, only that it is 'potentially' visible, barring obstruction, being scrolled or clipped out of the field of view, or having an ancestor container that has not yet made visible. A widget is potentially onscreen if it has both STATE_VISIBLE and STATE_SHOWING. The absence of STATE_VISIBLE and STATE_SHOWING is semantically equivalent to saying that an object is 'hidden'. ]]>
+ * @Accessibility_STATE_MANAGES_DESCENDANTS: <![CDATA[ Indicates that "active-descendant-changed" event is sent when children become 'active' (i.e. are selected or navigated to onscreen). Used to prevent need to enumerate all children in very large containers, like tables. The presence of STATE_MANAGES_DESCENDANTS is an indication to the client. that the children should not, and need not, be enumerated by the client. Objects implementing this state are expected to provide relevant state notifications to listening clients, for instance notifications of visibility changes and activation of their contained child objects, without the client having previously requested references to those children. ]]>
+ * @Accessibility_STATE_INDETERMINATE: <![CDATA[ Indicates that a check box or other boolean indicator is in a state other than checked or not checked. This usually means that the boolean value reflected or controlled by the object does not apply consistently to the entire current context. For example, a checkbox for the "Bold" attribute of text may have STATE_INDETERMINATE if the currently selected text contains a mixture of weight attributes. In many cases interacting with a STATE_INDETERMINATE object will cause the context's corresponding boolean attribute to be homogenized, whereupon the object will lose STATE_INDETERMINATE and a corresponding state-changed event will be fired. ]]>
+ * @Accessibility_STATE_REQUIRED: <![CDATA[ Indicates that user interaction with this object is 'required' from the user, for instance before completing the processing of a form. ]]>
+ * @Accessibility_STATE_TRUNCATED: <![CDATA[ Indicates that an object's onscreen content is truncated, e.g. a text value in a spreadsheet cell. ]]>
+ * @Accessibility_STATE_ANIMATED: <![CDATA[ Indicates this object's visual representation is dynamic, not static. This state may be applied to an object during an animated 'effect' and be removed from the object once its visual representation becomes static. some applications, notably content viewers, may not be able to detect all kinds of animated content. Therefore the absence of this state should not be taken as definitive evidence that the object's visual representation is static; this state is advisory. ]]>
+ * @Accessibility_STATE_INVALID_ENTRY: <![CDATA[ This object has indicated an error condition due to failure of input validation. For instance, a form control may acquire this state in response to invalid or malformed user input. ]]>
+ * @Accessibility_STATE_SUPPORTS_AUTOCOMPLETION: <![CDATA[ This state indicates that the object in question implements some form of ¨typeahead¨ or pre-selection behavior whereby entering the first character of one or more sub-elements causes those elements to scroll into view or become selected. Subsequent character input may narrow the selection further as long as one or more sub-elements match the string. This state is normally only useful and encountered on objects that implement Selection. In some cases the typeahead behavior may result in full or partial ¨completion¨ of the data in the input field, in which case these input events may trigger text-changed events from the source. ]]>
+ * @Accessibility_STATE_SELECTABLE_TEXT: <![CDATA[ This state indicates that the object in question supports text selection. It should only be exposed on objects which implement the Text interface, in order to distinguish this state from STATE_SELECTABLE, which infers that the object in question is a selectable child of an object which implements Selection. While similar, text selection and subelement selection are distinct operations. ]]>
+ * @Accessibility_STATE_IS_DEFAULT: <![CDATA[ This state indicates that the object in question is the 'default' interaction object in a dialog, i.e. the one that gets activated if the user presses "Enter" when the dialog is initially posted. ]]>
+ * @Accessibility_STATE_VISITED: <![CDATA[ This state indicates that the object (typically a hyperlink) has already been activated or invoked, with the result that some backing data has been downloaded or rendered. ]]>
+ * @Accessibility_STATE_LAST_DEFINED: <![CDATA[ This value of the enumeration should not be used as a parameter, it indicates the number of items in the StateType enumeration. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_STATE_INVALID,
+ Accessibility_STATE_ACTIVE,
+ Accessibility_STATE_ARMED,
+ Accessibility_STATE_BUSY,
+ Accessibility_STATE_CHECKED,
+ Accessibility_STATE_COLLAPSED,
+ Accessibility_STATE_DEFUNCT,
+ Accessibility_STATE_EDITABLE,
+ Accessibility_STATE_ENABLED,
+ Accessibility_STATE_EXPANDABLE,
+ Accessibility_STATE_EXPANDED,
+ Accessibility_STATE_FOCUSABLE,
+ Accessibility_STATE_FOCUSED,
+ Accessibility_STATE_HAS_TOOLTIP,
+ Accessibility_STATE_HORIZONTAL,
+ Accessibility_STATE_ICONIFIED,
+ Accessibility_STATE_MODAL,
+ Accessibility_STATE_MULTI_LINE,
+ Accessibility_STATE_MULTISELECTABLE,
+ Accessibility_STATE_OPAQUE,
+ Accessibility_STATE_PRESSED,
+ Accessibility_STATE_RESIZABLE,
+ Accessibility_STATE_SELECTABLE,
+ Accessibility_STATE_SELECTED,
+ Accessibility_STATE_SENSITIVE,
+ Accessibility_STATE_SHOWING,
+ Accessibility_STATE_SINGLE_LINE,
+ Accessibility_STATE_STALE,
+ Accessibility_STATE_TRANSIENT,
+ Accessibility_STATE_VERTICAL,
+ Accessibility_STATE_VISIBLE,
+ Accessibility_STATE_MANAGES_DESCENDANTS,
+ Accessibility_STATE_INDETERMINATE,
+ Accessibility_STATE_REQUIRED,
+ Accessibility_STATE_TRUNCATED,
+ Accessibility_STATE_ANIMATED,
+ Accessibility_STATE_INVALID_ENTRY,
+ Accessibility_STATE_SUPPORTS_AUTOCOMPLETION,
+ Accessibility_STATE_SELECTABLE_TEXT,
+ Accessibility_STATE_IS_DEFAULT,
+ Accessibility_STATE_VISITED,
+ Accessibility_STATE_LAST_DEFINED,
+} Accessibility_StateType;
+
+/**
+ * NUM_ACCESSIBILITY_STATETYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_StateType.
+ */
+#define NUM_ACCESSIBILITY_STATETYPES (41+1)
+
+/**
+ *
+Accessibility_KeyEventType:
+ * @Accessibility_KEY_PRESSED: <![CDATA[]]>
+ * @Accessibility_KEY_RELEASED: <![CDATA[]]>
+ *
+ * <![CDATA[ Deprecated, DO NOT USE! ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_KEY_PRESSED,
+ Accessibility_KEY_RELEASED,
+} Accessibility_KeyEventType;
+
+/**
+ * NUM_ACCESSIBILITY_KEYEVENTTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_KeyEventType.
+ */
+#define NUM_ACCESSIBILITY_KEYEVENTTYPES (1+1)
+
+/**
+ *
+Accessibility_EventType:
+ * @Accessibility_KEY_PRESSED_EVENT: <![CDATA[ < key on a keyboard device was pressed. ]]>
+ * @Accessibility_KEY_RELEASED_EVENT: <![CDATA[ < key on a keyboard device was released. ]]>
+ * @Accessibility_BUTTON_PRESSED_EVENT: <![CDATA[ < button on a non-keyboard human interface device (HID) was pressed ]]>
+ * @Accessibility_BUTTON_RELEASED_EVENT: <![CDATA[ < button on a non-keyboard human interface device (HID) was pressed ]]>
+ *
+ * <![CDATA[ Used to specify the event types of interest to an EventListener, or to identify the type of an event for which notification has been sent. @see EventTypeSeq, DeviceEvent::type ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_KEY_PRESSED_EVENT,
+ Accessibility_KEY_RELEASED_EVENT,
+ Accessibility_BUTTON_PRESSED_EVENT,
+ Accessibility_BUTTON_RELEASED_EVENT,
+} Accessibility_EventType;
+
+/**
+ * NUM_ACCESSIBILITY_EVENTTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_EventType.
+ */
+#define NUM_ACCESSIBILITY_EVENTTYPES (3+1)
+
+/**
+ *
+Accessibility_KeySynthType:
+ * @Accessibility_KEY_PRESS: <![CDATA[ emulate the pressing of a hardware keyboard key. ]]>
+ * @Accessibility_KEY_RELEASE: <![CDATA[ emulate the release of a hardware keyboard key. ]]>
+ * @Accessibility_KEY_PRESSRELEASE: <![CDATA[ a hardware keyboard key is pressed and immediately released. ]]>
+ * @Accessibility_KEY_SYM: <![CDATA[ a symbolic key event is generated, without specifying a hardware key. @note if the keysym is not present in the current keyboard map, the DeviceEventController instance has a limited ability to generate such keysyms on-the-fly. Reliability of generateKeyboardEvent calls using out-of-keymap keysyms will vary from system to system, and on the number of different out-of-keymap being generated in quick succession. In practice this is rarely significant, since the keysyms of interest to AT clients and keyboard emulators are usually part of the current keymap, i.e. present on the system keyboard for the current locale (even if a physical hardware keyboard is not connected. ]]>
+ * @Accessibility_KEY_STRING: <![CDATA[ a string is converted to its equivalent keyboard events and emitted. If the string consists of complex character or composed characters which are not in the current keymap, string emission is subject to the out-of-keymap limitations described for KeySynthType::KEY_SYM. In practice this limitation primarily effects Chinese and Japanese locales. ]]>
+ *
+ * <![CDATA[ Used when synthesizing keyboard input via DeviceEventController:generateKeyboardEvent. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_KEY_PRESS,
+ Accessibility_KEY_RELEASE,
+ Accessibility_KEY_PRESSRELEASE,
+ Accessibility_KEY_SYM,
+ Accessibility_KEY_STRING,
+} Accessibility_KeySynthType;
+
+/**
+ * NUM_ACCESSIBILITY_KEYSYNTHTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_KeySynthType.
+ */
+#define NUM_ACCESSIBILITY_KEYSYNTHTYPES (4+1)
+
+/**
+ *
+Accessibility_ModifierType:
+ * @Accessibility_MODIFIER_SHIFT: <![CDATA[ The left or right 'Shift' key ]]>
+ * @Accessibility_MODIFIER_SHIFTLOCK: <![CDATA[ The ShiftLock or CapsLock key ]]>
+ * @Accessibility_MODIFIER_CONTROL: <![CDATA[ 'Control'/'Ctrl' ]]>
+ * @Accessibility_MODIFIER_ALT: <![CDATA[ The Alt key (as opposed to AltGr) ]]>
+ * @Accessibility_MODIFIER_META: <![CDATA[ depending on the platform this may map to 'Window', 'Function', 'Meta', 'Menu', or 'NumLock'. Such 'Meta keys' will map to one of META, META2, META3. On X Windows platforms these META values map to the modifier masks Mod1Mask, Mod2Mask, Mod3Mask, e.g. an event having ModifierType::MODIFIER_META2 means that the 'Mod2Mask' bit is set in the corresponding XEvent. ]]>
+ * @Accessibility_MODIFIER_META2: <![CDATA[]]>
+ * @Accessibility_MODIFIER_META3: <![CDATA[]]>
+ * @Accessibility_MODIFIER_NUMLOCK: <![CDATA[ A symbolic meta key name that is mapped by AT-SPI to the appropriate META value, for the convenience of the client. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_MODIFIER_SHIFT,
+ Accessibility_MODIFIER_SHIFTLOCK,
+ Accessibility_MODIFIER_CONTROL,
+ Accessibility_MODIFIER_ALT,
+ Accessibility_MODIFIER_META,
+ Accessibility_MODIFIER_META2,
+ Accessibility_MODIFIER_META3,
+ Accessibility_MODIFIER_NUMLOCK,
+} Accessibility_ModifierType;
+
+/**
+ * NUM_ACCESSIBILITY_MODIFIERTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_ModifierType.
+ */
+#define NUM_ACCESSIBILITY_MODIFIERTYPES (7+1)
+
+/**
+ *
+Accessibility_RelationType:
+ * @Accessibility_RELATION_NULL: <![CDATA[ Not a meaningful relationship; clients should not normally encounter this RelationType value. ]]>
+ * @Accessibility_RELATION_LABEL_FOR: <![CDATA[ Object is a label for one or more other objects. ]]>
+ * @Accessibility_RELATION_LABELLED_BY: <![CDATA[ Object is labelled by one or more other objects. ]]>
+ * @Accessibility_RELATION_CONTROLLER_FOR: <![CDATA[ Object is an interactive object which modifies the state, onscreen location, or other attributes of one or more target objects. ]]>
+ * @Accessibility_RELATION_CONTROLLED_BY: <![CDATA[ Object state, position, etc. is modified/controlled by user interaction with one or more other objects. For instance a viewport or scroll pane may be CONTROLLED_BY scrollbars. ]]>
+ * @Accessibility_RELATION_MEMBER_OF: <![CDATA[ Object has a grouping relationship (e.g. 'same group as') to one or more other objects. ]]>
+ * @Accessibility_RELATION_TOOLTIP_FOR: <![CDATA[ Object is a tooltip associated with another object. ]]>
+ * @Accessibility_RELATION_NODE_CHILD_OF: <![CDATA[ Reserved for future use. ]]>
+ * @Accessibility_RELATION_EXTENDED: <![CDATA[ Used to indicate that a relationship exists, but its type is not specified in the enumeration and must be obtained via a call to getRelationTypeName. ]]>
+ * @Accessibility_RELATION_FLOWS_TO: <![CDATA[ Object renders content which flows logically to another object. For instance, text in a paragraph may flow to another object which is not the 'next sibling' in the accessibility hierarchy. ]]>
+ * @Accessibility_RELATION_FLOWS_FROM: <![CDATA[ Reciprocal of RELATION_FLOWS_TO. ]]>
+ * @Accessibility_RELATION_SUBWINDOW_OF: <![CDATA[ Object is visually and semantically considered a subwindow of another object, even though it is not the object's child. Useful when dealing with embedded applications and other cases where the widget hierarchy does not map cleanly to the onscreen presentation. ]]>
+ * @Accessibility_RELATION_EMBEDS: <![CDATA[ Similar to SUBWINDOW_OF, but specifically used for cross-process embedding. ]]>
+ * @Accessibility_RELATION_EMBEDDED_BY: <![CDATA[ Reciprocal of RELATION_EMBEDS; Used to denote content rendered by embedded renderers that live in a separate process space from the embedding context. ]]>
+ * @Accessibility_RELATION_POPUP_FOR: <![CDATA[ Denotes that the object is a transient window or frame associated with another onscreen object. Similar to TOOLTIP_FOR, but more general. Useful for windows which are technically toplevels but which, for one or more reasons, do not explicitly cause their associated window to lose 'window focus'. Creation of a ROLE_WINDOW object with the POPUP_FOR relation usually requires some presentation action on the part of assistive technology clients, even though the previous toplevel ROLE_FRAME object may still be the active window. ]]>
+ * @Accessibility_RELATION_PARENT_WINDOW_OF: <![CDATA[ This is the reciprocal relation to RELATION_POPUP_FOR. ]]>
+ * @Accessibility_RELATION_DESCRIPTION_FOR: <![CDATA[ Indicates that an object provides descriptive information about another object; more verbose than RELATION_LABEL_FOR. ]]>
+ * @Accessibility_RELATION_DESCRIBED_BY: <![CDATA[ Indicates that another object provides descriptive information about this object; more verbose than RELATION_LABELLED_BY. ]]>
+ * @Accessibility_RELATION_LAST_DEFINED: <![CDATA[ Do not use as a parameter value, used to determine the size of the enumeration. ]]>
+ *
+ * <![CDATA[ RelationType specifies a relationship between objects (possibly one-to-many or many-to-one) outside of the normal parent/child hierarchical relationship. It allows better semantic identification of how objects are associated with one another. For instance the RELATION_LABELLED_BY relationship may be used to identify labelling information that should accompany the accessibleName property when presenting an object's content or identity to the end user. Similarly, RELATION_CONTROLLER_FOR can be used to further specify the context in which a valuator is useful, and/or the other UI components which are directly effected by user interactions with the valuator. Common examples include association of scrollbars with the viewport or panel which they control. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_RELATION_NULL,
+ Accessibility_RELATION_LABEL_FOR,
+ Accessibility_RELATION_LABELLED_BY,
+ Accessibility_RELATION_CONTROLLER_FOR,
+ Accessibility_RELATION_CONTROLLED_BY,
+ Accessibility_RELATION_MEMBER_OF,
+ Accessibility_RELATION_TOOLTIP_FOR,
+ Accessibility_RELATION_NODE_CHILD_OF,
+ Accessibility_RELATION_EXTENDED,
+ Accessibility_RELATION_FLOWS_TO,
+ Accessibility_RELATION_FLOWS_FROM,
+ Accessibility_RELATION_SUBWINDOW_OF,
+ Accessibility_RELATION_EMBEDS,
+ Accessibility_RELATION_EMBEDDED_BY,
+ Accessibility_RELATION_POPUP_FOR,
+ Accessibility_RELATION_PARENT_WINDOW_OF,
+ Accessibility_RELATION_DESCRIPTION_FOR,
+ Accessibility_RELATION_DESCRIBED_BY,
+ Accessibility_RELATION_LAST_DEFINED,
+} Accessibility_RelationType;
+
+/**
+ * NUM_ACCESSIBILITY_RELATIONTYPES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_RelationType.
+ */
+#define NUM_ACCESSIBILITY_RELATIONTYPES (18+1)
+
+/**
+ *
+Accessibility_Role:
+ * @Accessibility_ROLE_INVALID: <![CDATA[ A Role indicating an error condition, such as uninitialized Role data. ]]>
+ * @Accessibility_ROLE_ACCELERATOR_LABEL: <![CDATA[ Object is a label indicating the keyboard accelerators for the parent ]]>
+ * @Accessibility_ROLE_ALERT: <![CDATA[ Object is used to alert the user about something ]]>
+ * @Accessibility_ROLE_ANIMATION: <![CDATA[ Object contains a dynamic or moving image of some kind ]]>
+ * @Accessibility_ROLE_ARROW: <![CDATA[ Object is a 2d directional indicator ]]>
+ * @Accessibility_ROLE_CALENDAR: <![CDATA[ Object contains one or more dates, usually arranged into a 2d list ]]>
+ * @Accessibility_ROLE_CANVAS: <![CDATA[ Object that can be drawn into and is used to trap events ]]>
+ * @Accessibility_ROLE_CHECK_BOX: <![CDATA[ A choice that can be checked or unchecked and provides a separate indicator for the current state. ]]>
+ * @Accessibility_ROLE_CHECK_MENU_ITEM: <![CDATA[ A menu item that behaves like a check box (see ROLE_CHECK_BOX) ]]>
+ * @Accessibility_ROLE_COLOR_CHOOSER: <![CDATA[ A specialized dialog that lets the user choose a color. ]]>
+ * @Accessibility_ROLE_COLUMN_HEADER: <![CDATA[ The header for a column of data ]]>
+ * @Accessibility_ROLE_COMBO_BOX: <![CDATA[ A list of choices the user can select from ]]>
+ * @Accessibility_ROLE_DATE_EDITOR: <![CDATA[ An object which allows entry of a date ]]>
+ * @Accessibility_ROLE_DESKTOP_ICON: <![CDATA[ An inconifed internal frame within a DESKTOP_PANE ]]>
+ * @Accessibility_ROLE_DESKTOP_FRAME: <![CDATA[ A pane that supports internal frames and iconified versions of those internal frames. ]]>
+ * @Accessibility_ROLE_DIAL: <![CDATA[ An object that allows a value to be changed via rotating a visual element, or which displays a value via such a rotating element. ]]>
+ * @Accessibility_ROLE_DIALOG: <![CDATA[ A top level window with title bar and a border ]]>
+ * @Accessibility_ROLE_DIRECTORY_PANE: <![CDATA[ A pane that allows the user to navigate through and select the contents of a directory ]]>
+ * @Accessibility_ROLE_DRAWING_AREA: <![CDATA[ A specialized dialog that displays the files in the directory and lets the user select a file, browse a different directory, or specify a filename. ]]>
+ * @Accessibility_ROLE_FILE_CHOOSER: <![CDATA[ An object used for drawing custom user interface elements. ]]>
+ * @Accessibility_ROLE_FILLER: <![CDATA[ A object that fills up space in a user interface ]]>
+ * @Accessibility_ROLE_FOCUS_TRAVERSABLE: <![CDATA[ Don't use, reserved for future use. ]]>
+ * @Accessibility_ROLE_FONT_CHOOSER: <![CDATA[ Allows selection of a display font ]]>
+ * @Accessibility_ROLE_FRAME: <![CDATA[ A top level window with a title bar, border, menubar, etc. ]]>
+ * @Accessibility_ROLE_GLASS_PANE: <![CDATA[ A pane that is guaranteed to be painted on top of all panes beneath it ]]>
+ * @Accessibility_ROLE_HTML_CONTAINER: <![CDATA[ A document container for HTML, whose children represent the document content. ]]>
+ * @Accessibility_ROLE_ICON: <![CDATA[ A small fixed size picture, typically used to decorate components ]]>
+ * @Accessibility_ROLE_IMAGE: <![CDATA[ An image, typically static. ]]>
+ * @Accessibility_ROLE_INTERNAL_FRAME: <![CDATA[ A frame-like object that is clipped by a desktop pane. ]]>
+ * @Accessibility_ROLE_LABEL: <![CDATA[ An object used to present an icon or short string in an interface ]]>
+ * @Accessibility_ROLE_LAYERED_PANE: <![CDATA[ A specialized pane that allows its children to be drawn in layers, providing a form of stacking order. ]]>
+ * @Accessibility_ROLE_LIST: <![CDATA[ An object that presents a list of objects to the user and allows the user to select one or more of them. ]]>
+ * @Accessibility_ROLE_LIST_ITEM: <![CDATA[ An object that represents an element of a list. ]]>
+ * @Accessibility_ROLE_MENU: <![CDATA[ An object usually found inside a menu bar that contains a list of actions the user can choose from. ]]>
+ * @Accessibility_ROLE_MENU_BAR: <![CDATA[ An object usually drawn at the top of the primary dialog box of an application that contains a list of menus the user can choose from. ]]>
+ * @Accessibility_ROLE_MENU_ITEM: <![CDATA[ An object usually contained in a menu that presents an action the user can choose. ]]>
+ * @Accessibility_ROLE_OPTION_PANE: <![CDATA[ A specialized pane whose primary use is inside a DIALOG ]]>
+ * @Accessibility_ROLE_PAGE_TAB: <![CDATA[ An object that is a child of a page tab list ]]>
+ * @Accessibility_ROLE_PAGE_TAB_LIST: <![CDATA[ An object that presents a series of panels (or page tabs), one at a time, through some mechanism provided by the object. ]]>
+ * @Accessibility_ROLE_PANEL: <![CDATA[ A generic container that is often used to group objects. ]]>
+ * @Accessibility_ROLE_PASSWORD_TEXT: <![CDATA[ A text object uses for passwords, or other places where the text content is not shown visibly to the user. ]]>
+ * @Accessibility_ROLE_POPUP_MENU: <![CDATA[ A temporary window that is usually used to offer the user a list of choices, and then hides when the user selects one of those choices. ]]>
+ * @Accessibility_ROLE_PROGRESS_BAR: <![CDATA[ An object used to indicate how much of a task has been completed. ]]>
+ * @Accessibility_ROLE_PUSH_BUTTON: <![CDATA[ An object the user can manipulate to tell the application to do something. ]]>
+ * @Accessibility_ROLE_RADIO_BUTTON: <![CDATA[ A specialized check box that will cause other radio buttons in the same group to become uncghecked when this one is checked. ]]>
+ * @Accessibility_ROLE_RADIO_MENU_ITEM: <![CDATA[ Object is both a menu item and a "radio button" (see ROLE_RADIO_BUTTON) ]]>
+ * @Accessibility_ROLE_ROOT_PANE: <![CDATA[ A specialized pane that has a glass pane and a layered pane as its children. ]]>
+ * @Accessibility_ROLE_ROW_HEADER: <![CDATA[ The header for a row of data ]]>
+ * @Accessibility_ROLE_SCROLL_BAR: <![CDATA[ An object usually used to allow a user to incrementally view a large amount of data by moving the bounds of a viewport along a one-dimensional axis. ]]>
+ * @Accessibility_ROLE_SCROLL_PANE: <![CDATA[ An object that allows a user to incrementally view a large amount of information. ROLE_SCROLL_PANE objects are usually accompanied by ROLE_SCROLL_BAR controllers, on which the RELATION_CONTROLLER_FOR and RELATION_CONTROLLED_BY reciprocal relations are set; \see Accessibility::RelationSet. ]]>
+ * @Accessibility_ROLE_SEPARATOR: <![CDATA[ An object usually contained in a menu to provide a visible and logical separation of the contents in a menu. ]]>
+ * @Accessibility_ROLE_SLIDER: <![CDATA[ An object that allows the user to select from a bounded range ]]>
+ * @Accessibility_ROLE_SPIN_BUTTON: <![CDATA[ An object which allows one of a set of choices to be selected, and which displays the current choice. Unlike ROLE_SCROLL_BAR, ROLE_SLIDER objects need not control 'viewport'-like objects. ]]>
+ * @Accessibility_ROLE_SPLIT_PANE: <![CDATA[ A specialized panel that presents two other panels at the same time. ]]>
+ * @Accessibility_ROLE_STATUS_BAR: <![CDATA[ Object displays non-quantitative status information (c.f. ROLE_PROGRESS_BAR) ]]>
+ * @Accessibility_ROLE_TABLE: <![CDATA[ An object used to repesent information in terms of rows and columns. ]]>
+ * @Accessibility_ROLE_TABLE_CELL: <![CDATA[ A 'cell' or discrete child within a Table. \note Table cells need not have ROLE_TABLE_CELL, other RoleType values are valid as well. ]]>
+ * @Accessibility_ROLE_TABLE_COLUMN_HEADER: <![CDATA[ An object which labels a particular column in a Table. ]]>
+ * @Accessibility_ROLE_TABLE_ROW_HEADER: <![CDATA[ An object which labels a particular row in a Table. Table rows and columns may also be labelled via the RELATION_LABEL_FOR/RELATION_LABELLED_BY relationships; see Accessibility.RelationSet. ]]>
+ * @Accessibility_ROLE_TEAROFF_MENU_ITEM: <![CDATA[ Object allows menu to be removed from menubar and shown in its own window. ]]>
+ * @Accessibility_ROLE_TERMINAL: <![CDATA[ An object that emulates a terminal ]]>
+ * @Accessibility_ROLE_TEXT: <![CDATA[ An object that presents text to the user, of nonspecific type. ]]>
+ * @Accessibility_ROLE_TOGGLE_BUTTON: <![CDATA[ A specialized push button that can be checked or unchecked, but does not procide a separate indicator for the current state. ]]>
+ * @Accessibility_ROLE_TOOL_BAR: <![CDATA[ A bar or palette usually composed of push buttons or toggle buttons ]]>
+ * @Accessibility_ROLE_TOOL_TIP: <![CDATA[ An object that provides information about another object ]]>
+ * @Accessibility_ROLE_TREE: <![CDATA[ An object used to repsent hierarchical information to the user. ]]>
+ * @Accessibility_ROLE_TREE_TABLE: <![CDATA[ An object that presents both tabular and hierarchical info to the user ]]>
+ * @Accessibility_ROLE_UNKNOWN: <![CDATA[ The object contains some Accessible information, but its role is not known. ]]>
+ * @Accessibility_ROLE_VIEWPORT: <![CDATA[ An object usually used in a scroll pane, or to otherwise clip a larger object or content renderer to a specific onscreen viewport. ]]>
+ * @Accessibility_ROLE_WINDOW: <![CDATA[ A ¨top level window¨ with no title or border. ]]>
+ * @Accessibility_ROLE_EXTENDED: <![CDATA[ means that the role for this item is known, but not included in the core enumeration ]]>
+ * @Accessibility_ROLE_HEADER: <![CDATA[ An object that serves as a document header. ]]>
+ * @Accessibility_ROLE_FOOTER: <![CDATA[ An object that serves as a document footer. ]]>
+ * @Accessibility_ROLE_PARAGRAPH: <![CDATA[ An object which is contains a single paragraph of text content. See also ROLE_TEXT. ]]>
+ * @Accessibility_ROLE_RULER: <![CDATA[ An object which describes margins and tab stops, etc. for text objects which it controls (should have CONTROLLER_FOR relation to such). ]]>
+ * @Accessibility_ROLE_APPLICATION: <![CDATA[ An object corresponding to the toplevel accessible of an application, which may contain ROLE_FRAME objects or other accessible objects. Children of AccessibleDesktop objects are generally ROLE_APPLICATION objects. ]]>
+ * @Accessibility_ROLE_AUTOCOMPLETE: <![CDATA[ The object is a dialog or list containing items for insertion into an entry widget, for instance a list of words for completion of a text entry. ]]>
+ * @Accessibility_ROLE_EDITBAR: <![CDATA[ The object is an editable text object in a toolbar. ]]>
+ * @Accessibility_ROLE_EMBEDDED: <![CDATA[ The object is an embedded component container. This role is a "grouping" hint that the contained objects share a context which is different from the container in which this accessible is embedded. In particular, it is used for some kinds of document embedding, and for embedding of out-of-process component, "panel applets", etc. ]]>
+ * @Accessibility_ROLE_ENTRY: <![CDATA[ The object is a component whose textual content may be entered or modified by the user, provided STATE_EDITABLE is present. A readonly ROLE_ENTRY object (i.e. where STATE_EDITABLE is not present) implies a read-only 'text field' in a form, as opposed to a title, label, or caption. ]]>
+ * @Accessibility_ROLE_CHART: <![CDATA[ The object is a graphical depiction of quantitative data. It may contain multiple subelements whose attributes and/or description may be queried to obtain both the quantitative data and information about how the data is being presented. The LABELLED_BY relation is particularly important in interpreting objects of this type, as is the accessible-description property. See ROLE_CAPTION ]]>
+ * @Accessibility_ROLE_CAPTION: <![CDATA[ The object contains descriptive information, usually textual, about another user interface element such as a table, chart, or image. ]]>
+ * @Accessibility_ROLE_DOCUMENT_FRAME: <![CDATA[ The object is a visual frame or container which contains a view of document content. Document frames may occur within another Document instance, in which case the second document may be said to be embedded in the containing instance. HTML frames are often ROLE_DOCUMENT_FRAME. Either this object, or a singleton descendant, should implement the Document interface. ]]>
+ * @Accessibility_ROLE_HEADING: <![CDATA[ The object serves as a heading for content which follows it in a document. The 'heading level' of the heading, if availabe, may be obtained by querying the object's attributes. ]]>
+ * @Accessibility_ROLE_PAGE: <![CDATA[ The object is a containing instance which encapsulates a page of information. ROLE_PAGE is used in documents and content which support a paginated navigation model. ]]>
+ * @Accessibility_ROLE_SECTION: <![CDATA[ The object is a containing instance of document content which constitutes a particular 'logical' section of the document. The type of content within a section, and the nature of the section division itself, may be obtained by querying the object's attributes. Sections may be nested. ]]>
+ * @Accessibility_ROLE_REDUNDANT_OBJECT: <![CDATA[ The object is redundant with another object in the hierarchy, and is exposed for purely technical reasons. Objects of this role should be ignored by clients, if they are encountered at all. ]]>
+ * @Accessibility_ROLE_FORM: <![CDATA[ The object is a containing instance of document content which has within it components with which the user can interact in order to input information; i.e. the object is a container for pushbuttons, comboboxes, text input fields, and other 'GUI' components. ROLE_FORM should not, in general, be used for toplevel GUI containers or dialogs, but should be reserved for 'GUI' containers which occur within document content, for instance within Web documents, presentations, or text documents. Unlike other GUI containers and dialogs which occur inside application instances, ROLE_FORM containers' components are associated with the current document, rather than the current foreground application or viewer instance. ]]>
+ * @Accessibility_ROLE_LINK: <![CDATA[ The object is a hypertext anchor, i.e. a "link" in a hypertext document. Such objects are distinct from 'inline' content which may also use the Hypertext/Hyperlink interfaces to indicate the range/location within a text object where an inline or embedded object lies. ]]>
+ * @Accessibility_ROLE_INPUT_METHOD_WINDOW: <![CDATA[ The object is a window or similar viewport which is used to allow composition or input of a 'complex character', in other words it is an "input method window." ]]>
+ * @Accessibility_ROLE_LAST_DEFINED: <![CDATA[ Not a valid role, used for finding end of enumeration. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_ROLE_INVALID,
+ Accessibility_ROLE_ACCELERATOR_LABEL,
+ Accessibility_ROLE_ALERT,
+ Accessibility_ROLE_ANIMATION,
+ Accessibility_ROLE_ARROW,
+ Accessibility_ROLE_CALENDAR,
+ Accessibility_ROLE_CANVAS,
+ Accessibility_ROLE_CHECK_BOX,
+ Accessibility_ROLE_CHECK_MENU_ITEM,
+ Accessibility_ROLE_COLOR_CHOOSER,
+ Accessibility_ROLE_COLUMN_HEADER,
+ Accessibility_ROLE_COMBO_BOX,
+ Accessibility_ROLE_DATE_EDITOR,
+ Accessibility_ROLE_DESKTOP_ICON,
+ Accessibility_ROLE_DESKTOP_FRAME,
+ Accessibility_ROLE_DIAL,
+ Accessibility_ROLE_DIALOG,
+ Accessibility_ROLE_DIRECTORY_PANE,
+ Accessibility_ROLE_DRAWING_AREA,
+ Accessibility_ROLE_FILE_CHOOSER,
+ Accessibility_ROLE_FILLER,
+ Accessibility_ROLE_FOCUS_TRAVERSABLE,
+ Accessibility_ROLE_FONT_CHOOSER,
+ Accessibility_ROLE_FRAME,
+ Accessibility_ROLE_GLASS_PANE,
+ Accessibility_ROLE_HTML_CONTAINER,
+ Accessibility_ROLE_ICON,
+ Accessibility_ROLE_IMAGE,
+ Accessibility_ROLE_INTERNAL_FRAME,
+ Accessibility_ROLE_LABEL,
+ Accessibility_ROLE_LAYERED_PANE,
+ Accessibility_ROLE_LIST,
+ Accessibility_ROLE_LIST_ITEM,
+ Accessibility_ROLE_MENU,
+ Accessibility_ROLE_MENU_BAR,
+ Accessibility_ROLE_MENU_ITEM,
+ Accessibility_ROLE_OPTION_PANE,
+ Accessibility_ROLE_PAGE_TAB,
+ Accessibility_ROLE_PAGE_TAB_LIST,
+ Accessibility_ROLE_PANEL,
+ Accessibility_ROLE_PASSWORD_TEXT,
+ Accessibility_ROLE_POPUP_MENU,
+ Accessibility_ROLE_PROGRESS_BAR,
+ Accessibility_ROLE_PUSH_BUTTON,
+ Accessibility_ROLE_RADIO_BUTTON,
+ Accessibility_ROLE_RADIO_MENU_ITEM,
+ Accessibility_ROLE_ROOT_PANE,
+ Accessibility_ROLE_ROW_HEADER,
+ Accessibility_ROLE_SCROLL_BAR,
+ Accessibility_ROLE_SCROLL_PANE,
+ Accessibility_ROLE_SEPARATOR,
+ Accessibility_ROLE_SLIDER,
+ Accessibility_ROLE_SPIN_BUTTON,
+ Accessibility_ROLE_SPLIT_PANE,
+ Accessibility_ROLE_STATUS_BAR,
+ Accessibility_ROLE_TABLE,
+ Accessibility_ROLE_TABLE_CELL,
+ Accessibility_ROLE_TABLE_COLUMN_HEADER,
+ Accessibility_ROLE_TABLE_ROW_HEADER,
+ Accessibility_ROLE_TEAROFF_MENU_ITEM,
+ Accessibility_ROLE_TERMINAL,
+ Accessibility_ROLE_TEXT,
+ Accessibility_ROLE_TOGGLE_BUTTON,
+ Accessibility_ROLE_TOOL_BAR,
+ Accessibility_ROLE_TOOL_TIP,
+ Accessibility_ROLE_TREE,
+ Accessibility_ROLE_TREE_TABLE,
+ Accessibility_ROLE_UNKNOWN,
+ Accessibility_ROLE_VIEWPORT,
+ Accessibility_ROLE_WINDOW,
+ Accessibility_ROLE_EXTENDED,
+ Accessibility_ROLE_HEADER,
+ Accessibility_ROLE_FOOTER,
+ Accessibility_ROLE_PARAGRAPH,
+ Accessibility_ROLE_RULER,
+ Accessibility_ROLE_APPLICATION,
+ Accessibility_ROLE_AUTOCOMPLETE,
+ Accessibility_ROLE_EDITBAR,
+ Accessibility_ROLE_EMBEDDED,
+ Accessibility_ROLE_ENTRY,
+ Accessibility_ROLE_CHART,
+ Accessibility_ROLE_CAPTION,
+ Accessibility_ROLE_DOCUMENT_FRAME,
+ Accessibility_ROLE_HEADING,
+ Accessibility_ROLE_PAGE,
+ Accessibility_ROLE_SECTION,
+ Accessibility_ROLE_REDUNDANT_OBJECT,
+ Accessibility_ROLE_FORM,
+ Accessibility_ROLE_LINK,
+ Accessibility_ROLE_INPUT_METHOD_WINDOW,
+ Accessibility_ROLE_LAST_DEFINED,
+} Accessibility_Role;
+
+/**
+ * NUM_ACCESSIBILITY_ROLES:
+ *
+ * 1 higher than the highest valid value of #Accessibility_Role.
+ */
+#define NUM_ACCESSIBILITY_ROLES (90+1)
+
+/**
+ *
+Accessibility_LoginHelper_DeviceReq:
+ * @Accessibility_LoginHelper_GUI_EVENTS: <![CDATA[ Needs access to the GUI event subsystem (e.g. Xserver) ]]>
+ * @Accessibility_LoginHelper_CORE_KEYBOARD: <![CDATA[ Needs access to the system keyboard events (read and write) ]]>
+ * @Accessibility_LoginHelper_CORE_POINTER: <![CDATA[ Needs access to the onscreen pointer (e.g. mouse pointer) ]]>
+ * @Accessibility_LoginHelper_EXT_INPUT: <![CDATA[ Reads XInput extended input devices ]]>
+ * @Accessibility_LoginHelper_POST_WINDOWS: <![CDATA[ Posts Windows, and needs for toplevel windows to be visible ]]>
+ * @Accessibility_LoginHelper_AUDIO_OUT: <![CDATA[ Writes to audio device ]]>
+ * @Accessibility_LoginHelper_AUDIO_IN: <![CDATA[ Reads from audio device ]]>
+ * @Accessibility_LoginHelper_NETWORK: <![CDATA[ Requires access to general network services, including remote access ]]>
+ * @Accessibility_LoginHelper_LOCALHOST: <![CDATA[ Requires network services hosted on LOCALHOST only ]]>
+ * @Accessibility_LoginHelper_SERIAL_OUT: <![CDATA[ Writes to a serial port ]]>
+ * @Accessibility_LoginHelper_SERIAL_IN: <![CDATA[ !<: Reads from a serial port ]]>
+ *
+ * <![CDATA[ The system and device access and services which the LoginHelper-implementing assistive technology requires in order to enable the user to use the system. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_LoginHelper_GUI_EVENTS,
+ Accessibility_LoginHelper_CORE_KEYBOARD,
+ Accessibility_LoginHelper_CORE_POINTER,
+ Accessibility_LoginHelper_EXT_INPUT,
+ Accessibility_LoginHelper_POST_WINDOWS,
+ Accessibility_LoginHelper_AUDIO_OUT,
+ Accessibility_LoginHelper_AUDIO_IN,
+ Accessibility_LoginHelper_NETWORK,
+ Accessibility_LoginHelper_LOCALHOST,
+ Accessibility_LoginHelper_SERIAL_OUT,
+ Accessibility_LoginHelper_SERIAL_IN,
+} Accessibility_LoginHelper_DeviceReq;
+
+/**
+ * NUM_ACCESSIBILITY_DEVICEREQS:
+ *
+ * 1 higher than the highest valid value of #Accessibility_LoginHelper_DeviceReq.
+ */
+#define NUM_ACCESSIBILITY_DEVICEREQS (10+1)
+
+/**
+ *
+Accessibility_Selector_CommandResult:
+ * @Accessibility_Selector_COMMAND_RESULT_INVALID: <![CDATA[ The command was invalid or ill-formed; usually indicates an error condition. ]]>
+ * @Accessibility_Selector_COMMAND_RESULT_SUCCESS: <![CDATA[ The command was successfully activated. ]]>
+ * @Accessibility_Selector_COMMAND_RESULT_FAILED: <![CDATA[ The command was valid, but could not be activated. This may be due to problems with permissions or error conditions. ]]>
+ * @Accessibility_Selector_COMMAND_RESULT_OBSOLETE: <![CDATA[ The command is no longer valid in the current program context. This may mean that the application has changed state in such a way that the specified command it no longer applicable, or because changes to the application state have rendered it ambiguous. Commands should be re-fetched and a new selection made. ]]>
+ * @Accessibility_Selector_COMMAND_RESULT_LAST_DEFINED: <![CDATA[ Defines size of enumeration; do not use this value as a parameter. ]]>
+ *
+ * <![CDATA[ A code returned by a call to activateCommand, indicating the result of the activation request. ]]>
+ *
+ * Bitfield/set of flags generated from the AT-SPI specification.
+ */
+typedef enum {
+ Accessibility_Selector_COMMAND_RESULT_INVALID,
+ Accessibility_Selector_COMMAND_RESULT_SUCCESS,
+ Accessibility_Selector_COMMAND_RESULT_FAILED,
+ Accessibility_Selector_COMMAND_RESULT_OBSOLETE,
+ Accessibility_Selector_COMMAND_RESULT_LAST_DEFINED,
+} Accessibility_Selector_CommandResult;
+
+/**
+ * NUM_ACCESSIBILITY_COMMANDRESULTS:
+ *
+ * 1 higher than the highest valid value of #Accessibility_Selector_CommandResult.
+ */
+#define NUM_ACCESSIBILITY_COMMANDRESULTS (4+1)
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif
projects / platform / core / uifw / at-spi2-atk.git / commitdiff