#!/bin/sh
-# Run this to generate all the initial makefiles, etc.
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
+test -n "$srcdir" || srcdir=`dirname "$0"`
+test -n "$srcdir" || srcdir=.
-#name of package
-PKG_NAME=${PKG_NAME:-Package}
+olddir=`pwd`
+cd "$srcdir"
-# default version requirements ...
-REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
-REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
-REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
-REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
-REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
-REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
-REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
-REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
-REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
-REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
+# gnome-autogen.sh runs configure, so do likewise.
+autoreconf -vif
-# a list of required m4 macros. Package can set an initial value
-REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
-FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
+cd "$olddir"
-# Not all echo versions allow -n, so we check what is possible. This test is
-# based on the one in autoconf.
-ECHO_C=
-ECHO_N=
-case `echo -n x` in
--n*)
- case `echo 'x\c'` in
- *c*) ;;
- *) ECHO_C='\c';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
+test -n "$NOCONFIGURE" || "$srcdir/configure" "$@"
-# some terminal codes ...
-if tty < /dev/null 1>/dev/null 2>&1; then
- boldface="`tput bold 2>/dev/null`"
- normal="`tput sgr0 2>/dev/null`"
-else
- boldface=
- normal=
-fi
-printbold() {
- echo $ECHO_N "$boldface" $ECHO_C
- echo "$@"
- echo $ECHO_N "$normal" $ECHO_C
-}
-printerr() {
- echo "$@" >&2
-}
-
-# Usage:
-# compare_versions MIN_VERSION ACTUAL_VERSION
-# returns true if ACTUAL_VERSION >= MIN_VERSION
-compare_versions() {
- ch_min_version=$1
- ch_actual_version=$2
- ch_status=0
- IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
- set $ch_actual_version
- for ch_min in $ch_min_version; do
- ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
- if [ -z "$ch_min" ]; then break; fi
- if [ -z "$ch_cur" ]; then ch_status=1; break; fi
- if [ $ch_cur -gt $ch_min ]; then break; fi
- if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
- done
- IFS="$ch_save_IFS"
- return $ch_status
-}
-
-# Usage:
-# version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
-# checks to see if the package is available
-version_check() {
- vc_package=$1
- vc_variable=$2
- vc_checkprogs=$3
- vc_min_version=$4
- vc_source=$5
- vc_status=1
-
- vc_checkprog=`eval echo "\\$$vc_variable"`
- if [ -n "$vc_checkprog" ]; then
- printbold "using $vc_checkprog for $vc_package"
- return 0
- fi
-
- if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
- vc_comparator="="
- else
- vc_comparator=">="
- fi
- printbold "checking for $vc_package $vc_comparator $vc_min_version..."
- for vc_checkprog in $vc_checkprogs; do
- echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
- if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
- vc_actual_version=`$vc_checkprog --version | head -n 1 | \
- sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
- if compare_versions $vc_min_version $vc_actual_version; then
- echo "found $vc_actual_version"
- # set variables
- eval "$vc_variable=$vc_checkprog; \
- ${vc_variable}_VERSION=$vc_actual_version"
- vc_status=0
- break
- else
- echo "too old (found version $vc_actual_version)"
- fi
- else
- echo "not found."
- fi
- done
- if [ "$vc_status" != 0 ]; then
- printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
- printerr " to build $PKG_NAME. Download the appropriate package for"
- printerr " from your distribution or get the source tarball at"
- printerr " $vc_source"
- printerr
- exit $vc_status
- fi
- return $vc_status
-}
-
-# Usage:
-# require_m4macro filename.m4
-# adds filename.m4 to the list of required macros
-require_m4macro() {
- case "$REQUIRED_M4MACROS" in
- $1\ * | *\ $1\ * | *\ $1) ;;
- *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
- esac
-}
-
-forbid_m4macro() {
- case "$FORBIDDEN_M4MACROS" in
- $1\ * | *\ $1\ * | *\ $1) ;;
- *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
- esac
-}
-
-# Usage:
-# add_to_cm_macrodirs dirname
-# Adds the dir to $cm_macrodirs, if it's not there yet.
-add_to_cm_macrodirs() {
- case $cm_macrodirs in
- "$1 "* | *" $1 "* | *" $1") ;;
- *) cm_macrodirs="$cm_macrodirs $1";;
- esac
-}
-
-# Usage:
-# print_m4macros_error
-# Prints an error message saying that autoconf macros were misused
-print_m4macros_error() {
- printerr "***Error***: some autoconf macros required to build $PKG_NAME"
- printerr " were not found in your aclocal path, or some forbidden"
- printerr " macros were found. Perhaps you need to adjust your"
- printerr " ACLOCAL_FLAGS?"
- printerr
-}
-
-# Usage:
-# check_m4macros
-# Checks that all the requested macro files are in the aclocal macro path
-# Uses REQUIRED_M4MACROS and ACLOCAL variables.
-check_m4macros() {
- # construct list of macro directories
- cm_macrodirs=`$ACLOCAL --print-ac-dir`
- # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
- # but it contains only Automake's own macros, so we can ignore it.
-
- # Read the dirlist file, supported by Automake >= 1.7.
- if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
- cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
- if [ -n "$cm_dirlist" ] ; then
- for cm_dir in $cm_dirlist; do
- if [ -d $cm_dir ]; then
- add_to_cm_macrodirs $cm_dir
- fi
- done
- fi
- fi
-
- # Parse $ACLOCAL_FLAGS
- set - $ACLOCAL_FLAGS
- while [ $# -gt 0 ]; do
- if [ "$1" = "-I" ]; then
- add_to_cm_macrodirs "$2"
- shift
- fi
- shift
- done
-
- cm_status=0
- if [ -n "$REQUIRED_M4MACROS" ]; then
- printbold "Checking for required M4 macros..."
- # check that each macro file is in one of the macro dirs
- for cm_macro in $REQUIRED_M4MACROS; do
- cm_macrofound=false
- for cm_dir in $cm_macrodirs; do
- if [ -f "$cm_dir/$cm_macro" ]; then
- cm_macrofound=true
- break
- fi
- # The macro dir in Cygwin environments may contain a file
- # called dirlist containing other directories to look in.
- if [ -f "$cm_dir/dirlist" ]; then
- for cm_otherdir in `cat $cm_dir/dirlist`; do
- if [ -f "$cm_otherdir/$cm_macro" ]; then
- cm_macrofound=true
- break
- fi
- done
- fi
- done
- if $cm_macrofound; then
- :
- else
- printerr " $cm_macro not found"
- cm_status=1
- fi
- done
- fi
- if [ "$cm_status" != 0 ]; then
- print_m4macros_error
- exit $cm_status
- fi
- if [ -n "$FORBIDDEN_M4MACROS" ]; then
- printbold "Checking for forbidden M4 macros..."
- # check that each macro file is in one of the macro dirs
- for cm_macro in $FORBIDDEN_M4MACROS; do
- cm_macrofound=false
- for cm_dir in $cm_macrodirs; do
- if [ -f "$cm_dir/$cm_macro" ]; then
- cm_macrofound=true
- break
- fi
- done
- if $cm_macrofound; then
- printerr " $cm_macro found (should be cleared from macros dir)"
- cm_status=1
- fi
- done
- fi
- if [ "$cm_status" != 0 ]; then
- print_m4macros_error
- exit $cm_status
- fi
-}
-
-# try to catch the case where the macros2/ directory hasn't been cleared out.
-forbid_m4macro gnome-cxx-check.m4
-
-want_libtool=false
-want_gettext=false
-want_glib_gettext=false
-want_intltool=false
-want_pkg_config=false
-want_gtk_doc=false
-want_gnome_doc_utils=false
-want_maintainer_mode=false
-
-configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
-for configure_ac in $configure_files; do
- dirname=`dirname $configure_ac`
- if [ -f $dirname/NO-AUTO-GEN ]; then
- echo skipping $dirname -- flagged as no auto-gen
- continue
- fi
- if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
- grep "^LT_INIT" $configure_ac >/dev/null; then
- want_libtool=true
- fi
- if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
- want_gettext=true
- fi
- if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
- want_glib_gettext=true
- fi
- if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
- grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
- want_intltool=true
- fi
- if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
- want_pkg_config=true
- fi
- if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
- want_gtk_doc=true
- fi
- if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
- want_gnome_doc_utils=true
- fi
-
- # check that AM_MAINTAINER_MODE is used
- if grep "^AM_MAINTAINER_MODE" $configure_ac >/dev/null; then
- want_maintainer_mode=true
- fi
-
- if grep "^YELP_HELP_INIT" $configure_ac >/dev/null; then
- require_m4macro yelp.m4
- fi
-
- # check to make sure gnome-common macros can be found ...
- if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
- grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
- grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
- require_m4macro gnome-common.m4
- fi
- if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
- grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
- require_m4macro gnome-compiler-flags.m4
- fi
-done
-
-#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
-WANT_AUTOCONF_2_5=1
-export WANT_AUTOCONF_2_5
-version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
- "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz"
-AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
-
-case $REQUIRED_AUTOMAKE_VERSION in
- 1.4*) automake_progs="automake-1.4" ;;
- 1.5*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
- 1.6*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
- 1.7*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
- 1.8*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8" ;;
- 1.9*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9" ;;
- 1.10*) automake_progs="automake-1.12 automake-1.11 automake-1.10" ;;
- 1.11*) automake_progs="automake-1.12 automake-1.11" ;;
- 1.12*) automake_progs="automake-1.12" ;;
-esac
-version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
- "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz"
-ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
-
-if $want_libtool; then
- version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
- "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz"
- require_m4macro libtool.m4
-fi
-
-if $want_gettext; then
- version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
- "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz"
- require_m4macro gettext.m4
-fi
-
-if $want_glib_gettext; then
- version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
- "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
- require_m4macro glib-gettext.m4
-fi
-
-if $want_intltool; then
- version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
- "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
- require_m4macro intltool.m4
-fi
-
-if $want_pkg_config; then
- version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
- "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
- require_m4macro pkg.m4
-fi
-
-if $want_gtk_doc; then
- version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
- "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/"
- require_m4macro gtk-doc.m4
-fi
-
-if $want_gnome_doc_utils; then
- version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
- "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/"
-fi
-
-if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
- version_check gnome-common DOC_COMMON gnome-doc-common \
- $REQUIRED_DOC_COMMON_VERSION " "
-fi
-
-check_m4macros
-
-if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
- printerr "**Warning**: I am going to run \`configure' with no arguments."
- printerr "If you wish to pass any to it, please specify them on the"
- printerr \`$0\'" command line."
- printerr
-fi
-
-topdir=`pwd`
-for configure_ac in $configure_files; do
- dirname=`dirname $configure_ac`
- basename=`basename $configure_ac`
- if [ -f $dirname/NO-AUTO-GEN ]; then
- echo skipping $dirname -- flagged as no auto-gen
- elif [ ! -w $dirname ]; then
- echo skipping $dirname -- directory is read only
- else
- printbold "Processing $configure_ac"
- cd $dirname
-
- # Note that the order these tools are called should match what
- # autoconf's "autoupdate" package does. See bug 138584 for
- # details.
-
- # programs that might install new macros get run before aclocal
- if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
- grep "^LT_INIT" $basename >/dev/null; then
- printbold "Running $LIBTOOLIZE..."
- $LIBTOOLIZE --force --copy || exit 1
- fi
-
- if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
- printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
- echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
- elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
- if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
- printbold "Running autopoint..."
- autopoint --force || exit 1
- else
- printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
- echo "no" | $GETTEXTIZE --force --copy || exit 1
- fi
- fi
-
- if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
- grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
- printbold "Running $INTLTOOLIZE..."
- $INTLTOOLIZE --force --copy --automake || exit 1
- fi
- if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
- printbold "Running $GTKDOCIZE..."
- $GTKDOCIZE --copy || exit 1
- fi
-
- if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
- printbold "Running gnome-doc-common..."
- gnome-doc-common --copy || exit 1
- fi
- if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
- printbold "Running $GNOME_DOC_PREPARE..."
- $GNOME_DOC_PREPARE --force --copy || exit 1
- fi
-
- # Now run aclocal to pull in any additional macros needed
-
- # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
- # directory to aclocal.
- m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
- if [ -n "$m4dir" ]; then
- m4dir="-I $m4dir"
- fi
- printbold "Running $ACLOCAL..."
- $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
-
- if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
- printerr "*** obsolete gnome macros were used in $configure_ac"
- fi
-
- # Now that all the macros are sorted, run autoconf and autoheader ...
- printbold "Running $AUTOCONF..."
- $AUTOCONF || exit 1
- if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
- printbold "Running $AUTOHEADER..."
- $AUTOHEADER || exit 1
- # this prevents automake from thinking config.h.in is out of
- # date, since autoheader doesn't touch the file if it doesn't
- # change.
- test -f config.h.in && touch config.h.in
- fi
-
- # Finally, run automake to create the makefiles ...
- printbold "Running $AUTOMAKE..."
- if [ -f COPYING ]; then
- cp -pf COPYING COPYING.autogen_bak
- fi
- if [ -f INSTALL ]; then
- cp -pf INSTALL INSTALL.autogen_bak
- fi
- if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
- $AUTOMAKE --gnu --add-missing --force --copy -Wno-portability || exit 1
- else
- $AUTOMAKE --gnu --add-missing --copy || exit 1
- fi
- if [ -f COPYING.autogen_bak ]; then
- cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
- rm -f COPYING.autogen_bak
- fi
- if [ -f INSTALL.autogen_bak ]; then
- cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
- rm -f INSTALL.autogen_bak
- fi
-
- cd "$topdir"
- fi
-done
-
-conf_flags=""
-
-if $want_maintainer_mode; then
- conf_flags="--enable-maintainer-mode"
-fi
-
-if test x$NOCONFIGURE = x; then
- printbold Running $srcdir/configure $conf_flags "$@" ...
- $srcdir/configure $conf_flags "$@" \
- && echo Now type \`make\' to compile $PKG_NAME || exit 1
-else
- echo Skipping configure process.
-fi
projects / platform / core / uifw / at-spi2-atk.git / blobdiff