srcdir=`dirname $0`
test -z "$srcdir" && srcdir=.
-PKG_NAME="at-spi"
-REQUIRED_AUTOMAKE_VERSION=1.9
+#name of package
+PKG_NAME=${PKG_NAME:-Package}
-USE_GNOME2_MACROS=1 . gnome-autogen.sh
+# default version requirements ...
+REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
+REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
+REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
+REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
+REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
+REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
+REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
+REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
+REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
+REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
+
+# a list of required m4 macros. Package can set an initial value
+REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
+FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
+
+# Not all echo versions allow -n, so we check what is possible. This test is
+# based on the one in autoconf.
+ECHO_C=
+ECHO_N=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ;;
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+# some terminal codes ...
+if tty < /dev/null 1>/dev/null 2>&1; then
+ boldface="`tput bold 2>/dev/null`"
+ normal="`tput sgr0 2>/dev/null`"
+else
+ boldface=
+ normal=
+fi
+printbold() {
+ echo $ECHO_N "$boldface" $ECHO_C
+ echo "$@"
+ echo $ECHO_N "$normal" $ECHO_C
+}
+printerr() {
+ echo "$@" >&2
+}
+
+# Usage:
+# compare_versions MIN_VERSION ACTUAL_VERSION
+# returns true if ACTUAL_VERSION >= MIN_VERSION
+compare_versions() {
+ ch_min_version=$1
+ ch_actual_version=$2
+ ch_status=0
+ IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
+ set $ch_actual_version
+ for ch_min in $ch_min_version; do
+ ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
+ if [ -z "$ch_min" ]; then break; fi
+ if [ -z "$ch_cur" ]; then ch_status=1; break; fi
+ if [ $ch_cur -gt $ch_min ]; then break; fi
+ if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
+ done
+ IFS="$ch_save_IFS"
+ return $ch_status
+}
+
+# Usage:
+# version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
+# checks to see if the package is available
+version_check() {
+ vc_package=$1
+ vc_variable=$2
+ vc_checkprogs=$3
+ vc_min_version=$4
+ vc_source=$5
+ vc_status=1
+
+ vc_checkprog=`eval echo "\\$$vc_variable"`
+ if [ -n "$vc_checkprog" ]; then
+ printbold "using $vc_checkprog for $vc_package"
+ return 0
+ fi
+
+ if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
+ vc_comparator="="
+ else
+ vc_comparator=">="
+ fi
+ printbold "checking for $vc_package $vc_comparator $vc_min_version..."
+ for vc_checkprog in $vc_checkprogs; do
+ echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
+ if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
+ vc_actual_version=`$vc_checkprog --version | head -n 1 | \
+ sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
+ if compare_versions $vc_min_version $vc_actual_version; then
+ echo "found $vc_actual_version"
+ # set variables
+ eval "$vc_variable=$vc_checkprog; \
+ ${vc_variable}_VERSION=$vc_actual_version"
+ vc_status=0
+ break
+ else
+ echo "too old (found version $vc_actual_version)"
+ fi
+ else
+ echo "not found."
+ fi
+ done
+ if [ "$vc_status" != 0 ]; then
+ printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
+ printerr " to build $PKG_NAME. Download the appropriate package for"
+ printerr " from your distribution or get the source tarball at"
+ printerr " $vc_source"
+ printerr
+ exit $vc_status
+ fi
+ return $vc_status
+}
+
+# Usage:
+# require_m4macro filename.m4
+# adds filename.m4 to the list of required macros
+require_m4macro() {
+ case "$REQUIRED_M4MACROS" in
+ $1\ * | *\ $1\ * | *\ $1) ;;
+ *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
+ esac
+}
+
+forbid_m4macro() {
+ case "$FORBIDDEN_M4MACROS" in
+ $1\ * | *\ $1\ * | *\ $1) ;;
+ *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
+ esac
+}
+
+# Usage:
+# add_to_cm_macrodirs dirname
+# Adds the dir to $cm_macrodirs, if it's not there yet.
+add_to_cm_macrodirs() {
+ case $cm_macrodirs in
+ "$1 "* | *" $1 "* | *" $1") ;;
+ *) cm_macrodirs="$cm_macrodirs $1";;
+ esac
+}
+
+# Usage:
+# print_m4macros_error
+# Prints an error message saying that autoconf macros were misused
+print_m4macros_error() {
+ printerr "***Error***: some autoconf macros required to build $PKG_NAME"
+ printerr " were not found in your aclocal path, or some forbidden"
+ printerr " macros were found. Perhaps you need to adjust your"
+ printerr " ACLOCAL_FLAGS?"
+ printerr
+}
+
+# Usage:
+# check_m4macros
+# Checks that all the requested macro files are in the aclocal macro path
+# Uses REQUIRED_M4MACROS and ACLOCAL variables.
+check_m4macros() {
+ # construct list of macro directories
+ cm_macrodirs=`$ACLOCAL --print-ac-dir`
+ # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
+ # but it contains only Automake's own macros, so we can ignore it.
+
+ # Read the dirlist file, supported by Automake >= 1.7.
+ if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
+ cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
+ if [ -n "$cm_dirlist" ] ; then
+ for cm_dir in $cm_dirlist; do
+ if [ -d $cm_dir ]; then
+ add_to_cm_macrodirs $cm_dir
+ fi
+ done
+ fi
+ fi
+
+ # Parse $ACLOCAL_FLAGS
+ set - $ACLOCAL_FLAGS
+ while [ $# -gt 0 ]; do
+ if [ "$1" = "-I" ]; then
+ add_to_cm_macrodirs "$2"
+ shift
+ fi
+ shift
+ done
+
+ cm_status=0
+ if [ -n "$REQUIRED_M4MACROS" ]; then
+ printbold "Checking for required M4 macros..."
+ # check that each macro file is in one of the macro dirs
+ for cm_macro in $REQUIRED_M4MACROS; do
+ cm_macrofound=false
+ for cm_dir in $cm_macrodirs; do
+ if [ -f "$cm_dir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ # The macro dir in Cygwin environments may contain a file
+ # called dirlist containing other directories to look in.
+ if [ -f "$cm_dir/dirlist" ]; then
+ for cm_otherdir in `cat $cm_dir/dirlist`; do
+ if [ -f "$cm_otherdir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ done
+ fi
+ done
+ if $cm_macrofound; then
+ :
+ else
+ printerr " $cm_macro not found"
+ cm_status=1
+ fi
+ done
+ fi
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
+ fi
+ if [ -n "$FORBIDDEN_M4MACROS" ]; then
+ printbold "Checking for forbidden M4 macros..."
+ # check that each macro file is in one of the macro dirs
+ for cm_macro in $FORBIDDEN_M4MACROS; do
+ cm_macrofound=false
+ for cm_dir in $cm_macrodirs; do
+ if [ -f "$cm_dir/$cm_macro" ]; then
+ cm_macrofound=true
+ break
+ fi
+ done
+ if $cm_macrofound; then
+ printerr " $cm_macro found (should be cleared from macros dir)"
+ cm_status=1
+ fi
+ done
+ fi
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
+ fi
+}
+
+# try to catch the case where the macros2/ directory hasn't been cleared out.
+forbid_m4macro gnome-cxx-check.m4
+
+want_libtool=false
+want_gettext=false
+want_glib_gettext=false
+want_intltool=false
+want_pkg_config=false
+want_gtk_doc=false
+want_gnome_doc_utils=false
+want_maintainer_mode=false
+
+configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ continue
+ fi
+ if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
+ grep "^LT_INIT" $configure_ac >/dev/null; then
+ want_libtool=true
+ fi
+ if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
+ want_gettext=true
+ fi
+ if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
+ want_glib_gettext=true
+ fi
+ if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
+ want_intltool=true
+ fi
+ if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
+ want_pkg_config=true
+ fi
+ if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
+ want_gtk_doc=true
+ fi
+ if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
+ want_gnome_doc_utils=true
+ fi
+
+ # check that AM_MAINTAINER_MODE is used
+ if grep "^AM_MAINTAINER_MODE" $configure_ac >/dev/null; then
+ want_maintainer_mode=true
+ fi
+
+ if grep "^YELP_HELP_INIT" $configure_ac >/dev/null; then
+ require_m4macro yelp.m4
+ fi
+
+ # check to make sure gnome-common macros can be found ...
+ if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
+ grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
+ grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
+ require_m4macro gnome-common.m4
+ fi
+ if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
+ grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
+ require_m4macro gnome-compiler-flags.m4
+ fi
+done
+
+#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
+WANT_AUTOCONF_2_5=1
+export WANT_AUTOCONF_2_5
+version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
+ "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz"
+AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
+
+case $REQUIRED_AUTOMAKE_VERSION in
+ 1.4*) automake_progs="automake-1.4" ;;
+ 1.5*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
+ 1.6*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
+ 1.7*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
+ 1.8*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8" ;;
+ 1.9*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9" ;;
+ 1.10*) automake_progs="automake-1.12 automake-1.11 automake-1.10" ;;
+ 1.11*) automake_progs="automake-1.12 automake-1.11" ;;
+ 1.12*) automake_progs="automake-1.12" ;;
+esac
+version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
+ "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz"
+ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
+
+if $want_libtool; then
+ version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
+ "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz"
+ require_m4macro libtool.m4
+fi
+
+if $want_gettext; then
+ version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
+ "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz"
+ require_m4macro gettext.m4
+fi
+
+if $want_glib_gettext; then
+ version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
+ "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
+ require_m4macro glib-gettext.m4
+fi
+
+if $want_intltool; then
+ version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
+ require_m4macro intltool.m4
+fi
+
+if $want_pkg_config; then
+ version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
+ "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
+ require_m4macro pkg.m4
+fi
+
+if $want_gtk_doc; then
+ version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/"
+ require_m4macro gtk-doc.m4
+fi
+
+if $want_gnome_doc_utils; then
+ version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
+ "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/"
+fi
+
+if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
+ version_check gnome-common DOC_COMMON gnome-doc-common \
+ $REQUIRED_DOC_COMMON_VERSION " "
+fi
+
+check_m4macros
+
+if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
+ printerr "**Warning**: I am going to run \`configure' with no arguments."
+ printerr "If you wish to pass any to it, please specify them on the"
+ printerr \`$0\'" command line."
+ printerr
+fi
+
+topdir=`pwd`
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ basename=`basename $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ elif [ ! -w $dirname ]; then
+ echo skipping $dirname -- directory is read only
+ else
+ printbold "Processing $configure_ac"
+ cd $dirname
+
+ # Note that the order these tools are called should match what
+ # autoconf's "autoupdate" package does. See bug 138584 for
+ # details.
+
+ # programs that might install new macros get run before aclocal
+ if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
+ grep "^LT_INIT" $basename >/dev/null; then
+ printbold "Running $LIBTOOLIZE..."
+ $LIBTOOLIZE --force --copy || exit 1
+ fi
+
+ if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
+ printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
+ echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
+ elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
+ if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
+ printbold "Running autopoint..."
+ autopoint --force || exit 1
+ else
+ printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
+ echo "no" | $GETTEXTIZE --force --copy || exit 1
+ fi
+ fi
+
+ if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
+ printbold "Running $INTLTOOLIZE..."
+ $INTLTOOLIZE --force --copy --automake || exit 1
+ fi
+ if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
+ printbold "Running $GTKDOCIZE..."
+ $GTKDOCIZE --copy || exit 1
+ fi
+
+ if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
+ printbold "Running gnome-doc-common..."
+ gnome-doc-common --copy || exit 1
+ fi
+ if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
+ printbold "Running $GNOME_DOC_PREPARE..."
+ $GNOME_DOC_PREPARE --force --copy || exit 1
+ fi
+
+ # Now run aclocal to pull in any additional macros needed
+
+ # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
+ # directory to aclocal.
+ m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+ if [ -n "$m4dir" ]; then
+ m4dir="-I $m4dir"
+ fi
+ printbold "Running $ACLOCAL..."
+ $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
+
+ if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
+ printerr "*** obsolete gnome macros were used in $configure_ac"
+ fi
+
+ # Now that all the macros are sorted, run autoconf and autoheader ...
+ printbold "Running $AUTOCONF..."
+ $AUTOCONF || exit 1
+ if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
+ printbold "Running $AUTOHEADER..."
+ $AUTOHEADER || exit 1
+ # this prevents automake from thinking config.h.in is out of
+ # date, since autoheader doesn't touch the file if it doesn't
+ # change.
+ test -f config.h.in && touch config.h.in
+ fi
+
+ # Finally, run automake to create the makefiles ...
+ printbold "Running $AUTOMAKE..."
+ if [ -f COPYING ]; then
+ cp -pf COPYING COPYING.autogen_bak
+ fi
+ if [ -f INSTALL ]; then
+ cp -pf INSTALL INSTALL.autogen_bak
+ fi
+ if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
+ $AUTOMAKE --gnu --add-missing --force --copy -Wno-portability || exit 1
+ else
+ $AUTOMAKE --gnu --add-missing --copy || exit 1
+ fi
+ if [ -f COPYING.autogen_bak ]; then
+ cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
+ rm -f COPYING.autogen_bak
+ fi
+ if [ -f INSTALL.autogen_bak ]; then
+ cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
+ rm -f INSTALL.autogen_bak
+ fi
+
+ cd "$topdir"
+ fi
+done
+
+conf_flags=""
+
+if $want_maintainer_mode; then
+ conf_flags="--enable-maintainer-mode"
+fi
+
+if test x$NOCONFIGURE = x; then
+ printbold Running $srcdir/configure $conf_flags "$@" ...
+ $srcdir/configure $conf_flags "$@" \
+ && echo Now type \`make\' to compile $PKG_NAME || exit 1
+else
+ echo Skipping configure process.
+fi
projects / platform / core / uifw / at-spi2-atk.git / blobdiff