* limitations under the License.
*/
+
#ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__
#define __TIZEN_NETWORK_CONNECTION_PROFILE_H__
+
#include <tizen.h>
+
#ifdef __cplusplus
extern "C" {
#endif
+
+/**
+ * @file connection_profile.h
+ */
+
+
/**
* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
* @{
*/
+
/**
-* @brief Security type of Wi-Fi
+ * @brief Enumeration for security type of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
- CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
- CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
- CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
- CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
+typedef enum {
+ CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */
+ CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */
+ CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */
} connection_wifi_security_type_e;
+
/**
-* @brief Below encryption modes are used in infrastructure and ad-hoc mode
+ * @brief Enumeration for encryption modes.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
- CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
- CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
- CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
- CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
+typedef enum {
+ CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */
+ CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */
} connection_wifi_encryption_type_e;
+
/**
* @}
*/
* @{
*/
-/**
-* @brief This enumeration defines the cellular protocol type.
-*/
-typedef enum
-{
- CONNECTION_CELLULAR_NETWORK_TYPE_UNKNOWN = 0, /**< Not defined */
- CONNECTION_CELLULAR_NETWORK_TYPE_GPRS = 1, /**< GPRS type */
- CONNECTION_CELLULAR_NETWORK_TYPE_EDGE = 2, /**< EDGE type */
- CONNECTION_CELLULAR_NETWORK_TYPE_UMTS = 3, /**< UMTS type */
-} connection_cellular_network_type_e;
/**
-* @breif This enum indicates cellular service type
+ * @brief Enumeration for cellular service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
- CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
- CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
- CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
- CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
- CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
- CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
+typedef enum {
+ CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */
+ CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */
+ CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */
+ CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */
+ CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */
} connection_cellular_service_type_e;
+
+/**
+ * @brief Enumeration for cellular pdn type.
+ * @since_tizen 3.0
+ * @remarks Use CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPV6 instead of
+ * CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6.
+ */
+typedef enum {
+ CONNECTION_CELLULAR_PDN_TYPE_UNKNOWN = 0, /**> Unknown */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4 = 1, /**> IPv4 */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV6 = 2, /**> IPv6 */
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPv6 = 3, /**> IPv4 and IPv6 (Deprecated since 4.0)*/
+ CONNECTION_CELLULAR_PDN_TYPE_IPV4_IPV6 = 4, /**> IPv4 and IPv6 (Since 4.0)*/
+} connection_cellular_pdn_type_e;
+
+
/**
-* @brief Cellular Authentication Type
+ * @brief Enumeration for cellular authentication type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
- CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
- CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
+typedef enum {
+ CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */
+ CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */
} connection_cellular_auth_type_e;
+
/**
* @}
*/
* @{
*/
+
/**
-* @brief The handle of profile
+ * @brief The profile handle.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
typedef void* connection_profile_h;
+
/**
-* @brief This enumeration defines the profile state type.
+ * @brief Enumeration for profile state type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
- CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
- CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
- CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
+typedef enum {
+ CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */
+ CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */
+ CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */
+ CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */
} connection_profile_state_e;
+
/**
-* @brief Enumerations of Address family
+ * @brief Enumeration for address family.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
- CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
+typedef enum {
+ CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */
+ CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */
} connection_address_family_e;
+
/**
-* @brief Net IP configuration Type
+ * @brief Enumeration for IP configuration type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */
- CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */
- CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/
- CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
- CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */
+typedef enum {
+ /**
+ * Not defined
+ */
+ CONNECTION_IP_CONFIG_TYPE_NONE = 0,
+
+ /**
+ * Manual IP configuration
+ */
+ CONNECTION_IP_CONFIG_TYPE_STATIC = 1,
+
+ /**
+ * Config IP using DHCP client
+ */
+ CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2,
+
+ /**
+ * Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available
+ */
+ CONNECTION_IP_CONFIG_TYPE_AUTO = 3,
+
+ /**
+ * Indicates an IP address that can not be modified
+ */
+ CONNECTION_IP_CONFIG_TYPE_FIXED = 4,
+
} connection_ip_config_type_e;
+
/**
-* @brief This enumeration defines the proxy method type.
+ * @brief Enumeration for proxy method type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-typedef enum
-{
- CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */
- CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
- CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */
+typedef enum {
+ /**
+ * Direct connection
+ */
+ CONNECTION_PROXY_TYPE_DIRECT = 0,
+
+ /**
+ * Auto configuration (use PAC file). If URL property is not set,
+ * DHCP/WPAD auto-discover will be tried
+ */
+ CONNECTION_PROXY_TYPE_AUTO = 1,
+
+ /**
+ * Manual configuration
+ */
+ CONNECTION_PROXY_TYPE_MANUAL = 2,
+
} connection_proxy_type_e;
/**
-* @enum connection_profile_type_e
-* @brief Enumerations of network connection type.
-*/
-typedef enum{
- CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
- CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
- CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
- CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
-} connection_profile_type_e;
+ * @brief Enumeration for DNS configuration type.
+ * @since_tizen 4.0
+ */
+typedef enum {
+ CONNECTION_DNS_CONFIG_TYPE_NONE = 0, /**< Not defined */
+ CONNECTION_DNS_CONFIG_TYPE_STATIC = 1, /**< Manual DNS configuration */
+ CONNECTION_DNS_CONFIG_TYPE_DYNAMIC = 2, /**< Config DNS using DHCP client */
+} connection_dns_config_type_e;
/**
-* @brief Creates the profile handle.
-* @details The profile name, which is got from connection_profile_get_name(), will include the keyword you set.
-* @remarks @a profile must be released with connection_profile_destroy().
-* @param[in] type The type of profile. #CONNECTION_PROFILE_TYPE_CELLULAR is only supported.
-* @param[in] keyword The keyword included in profile name
-* @param[out] profile The handle of the profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @see connection_profile_destroy()
-* @see connection_profile_get_name()
+ * @brief Enumeration for network connection type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
*/
-int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
+typedef enum {
+ CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */
+ CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */
+ CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */
+ CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */
+} connection_profile_type_e;
+
/**
-* @brief Destroys the profile handle.
-* @param[out] connection The handle to the connection
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_profile_create()
+ * @brief Creates a profile handle.
+ * @details The profile name, which you get from connection_profile_get_name()
+ * will include the keyword you set.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @remarks You must release @a profile using connection_profile_destroy().
+ * @param[in] type The type of profile \n
+ * #CONNECTION_PROFILE_TYPE_CELLULAR and #CONNECTION_PROFILE_TYPE_WIFI are supported
+ * @param[in] keyword The keyword included in profile name
+ * @param[out] profile The handle of the profile
+ * @return @c 0 on success,
+ * otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_profile_destroy()
+ * @see connection_profile_get_name()
+*/
+int connection_profile_create(connection_profile_type_e type,
+ const char *keyword, connection_profile_h *profile);
+
+
+/**
+ * @brief Destroys a profile handle.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[out] profile The handle to the profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see connection_profile_create()
*/
int connection_profile_destroy(connection_profile_h profile);
+
/**
-* @brief Clons the profile handle.
-* @remarks @a cloned_profile must be released with connection_profile_destroy().
-* @param[in] origin_profile The handle of origin profile
-* @param[out] cloned_profile The handle of cloned profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @see connection_profile_destroy()
-*/
-int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
-
-/**
-* @brief Gets the profile ID.
-* @details The separate profiles can have the same name.
-* So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
-* In case that you create a profile, this value will be determined when you add the profile.
-* @remarks @a profile_id must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] profile_id The ID of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @see connection_profile_get_name()
-* @see connection_add_profile()
-*/
-int connection_profile_get_id(connection_profile_h profile, char** profile_id);
-
-/**
-* @brief Gets the profile name.
-* @remarks @a profile_name must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] profile_name The name of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @see connection_profile_get_id()
-*/
-int connection_profile_get_name(connection_profile_h profile, char** profile_name);
-
-/**
-* @brief Gets the network type.
-* @param[in] profile The handle of profile
-* @param[out] type The type of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
-
-/**
-* @brief Gets the name of network interface. For example, eth0 and pdp0.
-* @remarks @a interface_name must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] interface_name The name of network interface
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-*/
-int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
-
-/**
-* @brief Refresh the profile information.
-* @remarks You should call this function in order to get the current information because the profile information can be changed.
-* @param[in] profile The handle of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @brief Clones a profile handle.
+ * @since_tizen 2.3
+ * @remarks You must release @a cloned_profile using connection_profile_destroy().
+ * @param[out] cloned_profile The handle of the cloned profile
+ * @param[in] origin_profile The handle of the origin profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_destroy()
+*/
+int connection_profile_clone(connection_profile_h *cloned_profile,
+ connection_profile_h origin_profile);
+
+
+/**
+ * @brief Gets the profile ID.
+ * @details The separate profiles can have the same name.
+ * So, you must use this API instead of connection_profile_get_name()
+ * if you want to get the unique identification.
+ * In case you create a profile, this value will be determined when you add the profile.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a profile_id using free().
+ * @param[in] profile The profile handle
+ * @param[out] profile_id The ID of the profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_get_name()
+ * @see connection_add_profile()
+*/
+int connection_profile_get_id(connection_profile_h profile, char **profile_id);
+
+
+/**
+ * @brief Gets the profile name.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a profile_name using free().
+ * @param[in] profile The profile handle
+ * @param[out] profile_name The name of the profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @see connection_profile_get_id()
+*/
+int connection_profile_get_name(connection_profile_h profile, char **profile_name);
+
+
+/**
+ * @brief Gets the network type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e *type);
+
+
+/**
+ * @brief Gets the name of the network interface, e.g. eth0 and pdp0.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a interface_name using free().
+ * @param[in] profile The profile handle
+ * @param[out] interface_name The name of the network interface
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+*/
+int connection_profile_get_network_interface_name(connection_profile_h profile,
+ char **interface_name);
+
+
+/**
+ * @brief Refreshes the profile information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @privlevel public
+ * @privilege %http://tizen.org/privilege/network.get
+ * @remarks You should call this function in order to get the current information
+ * because the profile information can be changed.
+ * @param[in] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_PERMISSION_DENIED Permission denied
*/
int connection_profile_refresh(connection_profile_h profile);
+
/**
-* @brief Gets the network type.
-* @param[in] profile The handle of profile
-* @param[out] state The state of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
-
-/**
-* @brief Gets the IP config type.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[out] type The type of IP config
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
-
-/**
-* @brief Gets the IP address.
-* @remarks @a ip_address must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[out] ip_address The IP address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
-
-/**
-* @brief Gets the Subnet Mask.
-* @remarks @a subnet_mask must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[out] subnet_mask The subnet mask
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
-
-/**
-* @brief Gets the Gateway address.
-* @remarks @a gateway_address must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[out] gateway_address The gateway address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
-
-/**
-* @brief Gets the DNS address.
-* @remarks The allowance of DNS address is 2. @a dns_address must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[in] order The order of DNS address. It starts from 1, which means first DNS address.
-* @param[in] address_family The address family
-* @param[out] dns_address The DNS address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
-
-/**
-* @brief Gets the Proxy type.
-* @param[in] profile The handle of profile
-* @param[out] type The type of proxy
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
-
-/**
-* @brief Gets the Proxy address.
-* @remarks @a proxy_address must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[out] proxy_address The proxy address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
-
-/**
-* @brief Sets the IP config type.
-* @details If you set IP config type to #WIFI_IP_CONFIG_TYPE_STATIC,
-* then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[in] type The type of IP config
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-*/
-int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
-
-/**
-* @brief Sets the IP address.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[in] ip_address The IP address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
-
-/**
-* @brief Sets the Subnet Mask.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[in] subnet_mask The subnet mask. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
-
-/**
-* @brief Sets the Gateway address.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[in] gateway_address The gateway address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
-
-/**
-* @brief Sets the DNS address.
-* @remarks The allowance of DNS address is 2.
-* @param[in] profile The handle of profile
-* @param[in] order The order of DNS address. It starts from 1, which means first DNS address.
-* @param[in] address_family The address family
-* @param[in] dns_address The DNS address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
-
-/**
-* @brief Sets the Proxy type.
-* @details If you set Proxy type to #WIFI_PROXY_TYPE_AUTO or #WIFI_PROXY_TYPE_MANUAL, then Proxy will be restored.
-* @param[in] profile The handle of profile
-* @param[in] type The type of proxy
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
-
-/**
-* @brief Sets the Proxy address.
-* @param[in] profile The handle of profile
-* @param[in] address_family The address family
-* @param[in] proxy_address The proxy address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
-
-/**
-* @brief Called when the state of profile is changed.
-* @param[in] state The state
-* @param[in] user_data The user data passed from the callback registration function
-* @see connection_profile_set_state_changed_cb()
-* @see connection_profile_unset_state_changed_cb()
-*/
-typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
-
-/**
-* @brief Registers the callback called when the state of profile is changed.
-* @param[in] profile The handle of profile
-* @param[in] callback The callback function to be called
-* @param[in] user_data The user data passed to the callback function
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
-* @post connection_opened_cb() is invoked when the state of profile is changed.
-* @see connection_profile_state_changed_cb()
-* @see connection_profile_unset_state_changed_cb()
-*/
-int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
-
-/**
-* @brief Unregisters the callback called when the state of profile is changed.
-* @param[in] profile The handle of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_profile_state_changed_cb()
-* @see connection_profile_set_state_changed_cb()
+ * @brief Gets the network type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] state The state of the profile
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_state(connection_profile_h profile,
+ connection_profile_state_e *state);
+
+
+/**
+ * @brief Gets the IP config type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] type The type of the IP config
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_ip_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_ip_config_type_e *type);
+
+
+/**
+ * @brief Gets the IP address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a ip_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] ip_address The IP address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_ip_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **ip_address);
+
+
+/**
+ * @brief Gets the Subnet Mask.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a subnet_mask using free().
+ * This function is supported only for IPv4 address family.
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] subnet_mask The subnet mask
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_subnet_mask(connection_profile_h profile,
+ connection_address_family_e address_family, char **subnet_mask);
+
+
+/**
+ * @brief Gets the Gateway address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a gateway_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] gateway_address The gateway address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_gateway_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **gateway_address);
+
+/**
+ * @brief Gets the DHCP Server address.
+ * @since_tizen 4.0
+ * @remarks You must release @a dhcp_server using free().
+ * This function is supported only for IPv4 address family.
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] dhcp_server The DHCP Server address
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_dhcp_server_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **dhcp_server);
+
+/**
+ * @brief Gets the DHCP lease duration.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] dhcp_lease_duration The DHCP lease duration in seconds
+ * @return @c 0 on success, otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_dhcp_lease_duration(connection_profile_h profile,
+ connection_address_family_e address_family, int *dhcp_lease_duration);
+
+/**
+ * @brief Gets the DNS address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks The allowance of the DNS address is @c 2. You must release @a dns_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] order The order of DNS address \n
+ * It starts from 1, which means first DNS address
+ * @param[in] address_family The address family
+ * @param[out] dns_address The DNS address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_dns_address(connection_profile_h profile,
+ int order, connection_address_family_e address_family, char **dns_address);
+
+
+/**
+ * @brief Gets the Proxy type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the proxy
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_proxy_type(connection_profile_h profile,
+ connection_proxy_type_e *type);
+
+
+/**
+ * @brief Gets the Proxy address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a proxy_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] proxy_address The proxy address
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_get_proxy_address(connection_profile_h profile,
+ connection_address_family_e address_family, char **proxy_address);
+
+
+/**
+ * @brief Sets the IP config type.
+ * @details If you set IP config type to #CONNECTION_IP_CONFIG_TYPE_STATIC,
+ * then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] type The type of the IP config
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+*/
+int connection_profile_set_ip_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_ip_config_type_e type);
+
+
+/**
+ * @brief Sets the IP address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a ip_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] ip_address The IP address \n
+ * If you set this value to @c NULL, then the existing value will be deleted
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_ip_address(connection_profile_h profile,
+ connection_address_family_e address_family, const char *ip_address);
+
+
+/**
+ * @brief Sets the Subnet Mask.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a subnet_mask using free().
+ * This function is supported only for IPv4 address family.
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] subnet_mask The subnet mask \n
+ * If you set this value to @c NULL, then the existing value will be deleted
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_subnet_mask(connection_profile_h profile,
+ connection_address_family_e address_family, const char *subnet_mask);
+
+
+/**
+ * @brief Sets the Gateway address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a gateway_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] gateway_address The gateway address \n
+ * If you set this value to @c NULL, then the existing value will be deleted
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_gateway_address(connection_profile_h profile,
+ connection_address_family_e address_family, const char *gateway_address);
+
+
+/**
+ * @brief Sets the DNS address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks The allowance of the DNS address is @c 2.
+ * @remarks You must release @a dns_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] order The order of the DNS address \n
+ * It starts from @c 1, which means first DNS address
+ * @param[in] address_family The address family
+ * @param[in] dns_address The DNS address \n
+ * If you set this value to NULL then the existing value will be deleted
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_dns_address(connection_profile_h profile,
+ int order, connection_address_family_e address_family, const char *dns_address);
+
+
+/**
+ * @brief Sets the Proxy type.
+ * @details If you set the Proxy type to #CONNECTION_PROXY_TYPE_AUTO or
+ * #CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the proxy
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_proxy_type(connection_profile_h profile,
+ connection_proxy_type_e type);
+
+
+/**
+ * @brief Sets the Proxy address.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a proxy_address using free().
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] proxy_address The proxy address \n
+ * If you set this value to @c NULL, then the existing value will be deleted
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @see connection_update_profile()
+*/
+int connection_profile_set_proxy_address(connection_profile_h profile,
+ connection_address_family_e address_family, const char *proxy_address);
+
+
+/**
+ * @brief Called when the state of the profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] state The state
+ * @param[in] user_data The user data passed from the callback registration function
+ * @see connection_profile_set_state_changed_cb()
+ * @see connection_profile_unset_state_changed_cb()
+*/
+typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state,
+ void *user_data);
+
+
+/**
+ * @brief Registers the callback that is called when the state of profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] callback The callback function to be called
+ * @param[in] user_data The user data passed to the callback function
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @post connection_opened_cb() is invoked when the state of profile is changed.
+ * @see connection_profile_state_changed_cb()
+ * @see connection_profile_unset_state_changed_cb()
+*/
+int connection_profile_set_state_changed_cb(connection_profile_h profile,
+ connection_profile_state_changed_cb callback, void *user_data);
+
+
+/**
+ * @brief Unregisters the callback that is called when the state of profile is changed.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @see connection_profile_state_changed_cb()
+ * @see connection_profile_set_state_changed_cb()
*/
int connection_profile_unset_state_changed_cb(connection_profile_h profile);
/**
+ * @brief Gets the IPv6 network state.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[out] state The profile state
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_get_ipv6_state(connection_profile_h profile,
+ connection_profile_state_e *state);
+
+/**
+ * @brief Sets the DNS config type.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] type The DNS config type
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_set_dns_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_dns_config_type_e type);
+
+/**
+ * @brief Gets the DNS config type.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] type The DNS config type
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_get_dns_config_type(connection_profile_h profile,
+ connection_address_family_e address_family, connection_dns_config_type_e *type);
+
+/**
+ * @brief Gets the network prefix length.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[out] prefix_len The network prefix length \n
+ * In case of IPv4, it means netmask length
+ * (also called a prefix, e.g. 8, 16, 24, 32)
+ * @return 0 on success, otherwise negative error value.
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ */
+int connection_profile_get_prefix_length(connection_profile_h profile,
+ connection_address_family_e address_family, int *prefix_len);
+
+/**
+ * @brief Sets the network prefix length.
+ * @since_tizen 4.0
+ * @param[in] profile The profile handle
+ * @param[in] address_family The address family
+ * @param[in] prefix_len The network prefix length
+ * In case of IPv4, it means netmask length
+ * (also called a prefix, e.g. 8, 16, 24, 32)
+ * @return 0 on success, otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+ */
+int connection_profile_set_prefix_length(connection_profile_h profile,
+ connection_address_family_e address_family, int prefix_len);
+
+/**
* @}
*/
* @{
*/
+
/**
-* @brief Gets the ESSID(Extended Service Set Identifier).
-* @remarks @a essid must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] essid The ESSID
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @brief Gets the ESSID (Extended Service Set Identifier).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a essid using free().
+ * @param[in] profile The profile handle
+ * @param[out] essid The ESSID
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
+int connection_profile_get_wifi_essid(connection_profile_h profile, char **essid);
+
/**
-* @brief Gets the BSSID(Basic Service Set Identifier).
-* @remarks @a bssid must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] bssid The BSSID
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @brief Gets the BSSID (Basic Service Set Identifier).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a bssid using free().
+ * @param[in] profile The profile handle
+ * @param[out] bssid The BSSID
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
+int connection_profile_get_wifi_bssid(connection_profile_h profile, char **bssid);
+
/**
-* @brief Gets the RSSI.
-* @param[in] profile The handle of profile
-* @param[out] rssi The RSSI
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @brief Gets the RSSI.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] rssi The RSSI
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
+int connection_profile_get_wifi_rssi(connection_profile_h profile, int *rssi);
+
/**
-* @brief Gets the frequency (MHz).
-* @param[in] profile The handle of profile
-* @param[out] frequency The frequency
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @brief Gets the frequency (MHz).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] frequency The frequency
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
+int connection_profile_get_wifi_frequency(connection_profile_h profile, int *frequency);
+
/**
-* @brief Gets the max speed (Mbps).
-* @param[in] profile The handle of profile
-* @param[out] max_speed The max speed
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @brief Gets the max speed (Mbps).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] max_speed The max speed
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
+int connection_profile_get_wifi_max_speed(connection_profile_h profile, int *max_speed);
+
/**
-* @brief Gets the security mode of Wi-Fi.
-* @param[in] profile The handle of profile
-* @param[out] type The type of Wi-Fi security
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @brief Gets the security mode of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
+int connection_profile_get_wifi_security_type(connection_profile_h profile,
+ connection_wifi_security_type_e *type);
+
/**
-* @brief Gets the security mode of Wi-Fi.
-* @param[in] profile The handle of profile
-* @param[out] type The type of Wi-Fi security
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @brief Gets the security mode of Wi-Fi.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of Wi-Fi security
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
+int connection_profile_get_wifi_encryption_type(connection_profile_h profile,
+ connection_wifi_encryption_type_e *type);
+
/**
-* @brief Checks whether passphrase is required.
-* @remarks This function is not valid if security type is #WIFI_SECURITY_TYPE_EAP.
-* @param[in] profile The handle of profile
-* @param[out] required Indicates whether passphrase is required or not
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @brief Checks whether passphrase is required.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks This function is not valid if security type is #CONNECTION_WIFI_SECURITY_TYPE_EAP.
+ * @param[in] profile The profile handle
+ * @param[out] required @c true if a passphrase is required,
+ * otherwise @c false if a passphrase is not required
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
+int connection_profile_is_wifi_passphrase_required(connection_profile_h profile,
+ bool *required);
+
/**
-* @brief Sets the passphrase of Wi-Fi WPA.
-* @param[in] profile The handle of profile
-* @param[in] passphrase The passphrase of Wi-Fi security
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_update_profile()
+ * @brief Sets the passphrase of the Wi-Fi WPA.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a passphrase using free().
+ * @param[in] profile The profile handle
+ * @param[in] passphrase The passphrase of Wi-Fi security
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
*/
-int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
+int connection_profile_set_wifi_passphrase(connection_profile_h profile,
+ const char *passphrase);
+
/**
-* @brief Checks whether WPS(Wi-Fi Protected Setup) is supported.
-* @remarks If WPS is supported, you can connect access point with WPS by wifi_connect_with_wps().
-* @param[in] profile The handle of profile
-* @param[out] supported Indicates whether WPS is supported or not
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @brief Checks whether the WPS (Wi-Fi Protected Setup) is supported.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks If WPS is supported, you can connect the access point with WPS by wifi_connect_with_wps().
+ * @param[in] profile The profile handle
+ * @param[out] supported @c true if WPS is supported,
+ * otherwise @c false if WPS is not supported
+ * @return @c 0 on success,
+ * otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
+int connection_profile_is_wifi_wps_supported(connection_profile_h profile,
+ bool *supported);
+
/**
* @}
* @{
*/
+
/**
-* @brief Gets the cellular network type.
-* @param[in] profile The handle of profile
-* @param[out] type The type of cellular
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @brief Gets the service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the cellular service
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_network_type(connection_profile_h profile, connection_cellular_network_type_e* type);
+int connection_profile_get_cellular_service_type(connection_profile_h profile,
+ connection_cellular_service_type_e *type);
+
/**
-* @brief Gets the service type.
-* @param[in] profile The handle of profile
-* @param[out] type The type of cellular service
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @brief Gets the APN (access point name).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a apn using free().
+ * @param[in] profile The profile handle
+ * @param[out] apn The name of the APN
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
+int connection_profile_get_cellular_apn(connection_profile_h profile, char **apn);
+
/**
-* @brief Gets the APN(access point name).
-* @remarks @a apn must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] apn The name of APN
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @brief Gets the authentication information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a user_name and @a password using free().
+ * @param[in] profile The profile handle
+ * @param[out] type The type of the authentication
+ * @param[out] user_name The user name
+ * @param[out] password The password
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
+int connection_profile_get_cellular_auth_info(connection_profile_h profile,
+ connection_cellular_auth_type_e *type, char **user_name, char **password);
+
/**
-* @brief Gets the authentication information.
-* @remarks @a user_name and @a password must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] type The type of authentication
-* @param[out] user_name The user name
-* @param[out] password The password
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
-* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @brief Gets the home URL.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a home_url using free().
+ * @param[in] profile The profile handle
+ * @param[out] home_url The home URL
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
+int connection_profile_get_cellular_home_url(connection_profile_h profile,
+ char **home_url);
+
/**
-* @brief Gets the home URL.
-* @remarks @a home_url must be released with free() by you.
-* @param[in] profile The handle of profile
-* @param[out] home_url The home URL
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
+ * @brief Gets the cellular pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
+ * @return @c 0 on success,
+ * otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
+int connection_profile_get_cellular_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e *type);
+
+
+/**
+ * @brief Gets the cellular roam pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[out] type The cellular pdn type
+ * @return @c 0 on success,
+ * otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_get_cellular_roam_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e *type);
+
+
+/**
+ * @brief Checks whether the connection is in roaming state.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_roaming @c true if the cellular is roaming,
+ * otherwise @c false if it is not roaming
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_roaming(connection_profile_h profile,
+ bool *is_roaming);
+
+
+/**
+ * @brief Checks whether the profile is hidden.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_hidden @c true if the profile is in hidden,
+ * otherwise @c false if the profile is not hidden
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_hidden(connection_profile_h profile,
+ bool *is_hidden);
+
+
+/**
+ * @brief Checks whether the profile is editable.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_editable @c true if the profile is editable,
+ * otherwise @c false if the profile is not editable
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_editable(connection_profile_h profile,
+ bool *is_editable);
+
+
+/**
+ * @brief Checks whether the profile is default.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[out] is_default @c true if the profile is default,
+ * otherwise @c false if the profile is not default
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+*/
+int connection_profile_is_cellular_default(connection_profile_h profile,
+ bool *is_default);
+
+
+/**
+ * @brief Sets the service type.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @param[in] profile The profile handle
+ * @param[in] service_type The type of cellular service
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
+*/
+int connection_profile_set_cellular_service_type(connection_profile_h profile,
+ connection_cellular_service_type_e service_type);
+
/**
-* @brief Gets the state of roaming.
-* @param[in] profile The handle of profile
-* @param[out] is_roaming Indicates whether cellular is in roaming or not
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @brief Sets the APN (Access Point Name).
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a apn using free().
+ * @param[in] profile The profile handle
+ * @param[in] apn The name of APN
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
*/
-int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
+int connection_profile_set_cellular_apn(connection_profile_h profile, const char *apn);
+
/**
-* @brief Sets the service type.
-* @param[in] profile The handle of profile
-* @param[out] type The type of cellular service
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_update_profile()
+ * @brief Sets the Authentication information.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a user_name using free().
+ * @param[in] profile The profile handle
+ * @param[in] type The type of the authentication
+ * @param[in] user_name The user name
+ * @param[in] password The password
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
*/
-int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
+int connection_profile_set_cellular_auth_info(connection_profile_h profile,
+ connection_cellular_auth_type_e type, const char *user_name, const char *password);
+
/**
-* @brief Sets the APN(Access Point Name).
-* @param[in] profile The handle of profile
-* @param[out] apn The name of APN
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_update_profile()
+ * @brief Sets the home URL.
+ * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif
+ * @remarks You must release @a home_url using free().
+ * @param[in] profile The profile handle
+ * @param[in] home_url The home URL
+ * @return @c 0 on success,
+ * otherwise a negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
+ * @see connection_update_profile()
*/
-int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
+int connection_profile_set_cellular_home_url(connection_profile_h profile,
+ const char *home_url);
+
/**
-* @brief Sets the Athentication information.
-* @param[in] profile The handle of profile
-* @param[out] type The type of authentication
-* @param[out] user_name The user name
-* @param[out] password The password
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_update_profile()
+ * @brief Sets the cellular pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
+ * @return @c 0 on success,
+ * otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
+int connection_profile_set_cellular_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e type);
+
/**
-* @brief Sets the home URL.
-* @param[in] profile The handle of profile
-* @param[out] home_url The home URL
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
-* @see connection_update_profile()
+ * @brief Sets the cellular roam pdn type.
+ * @since_tizen 3.0
+ * @param[in] profile The profile handle
+ * @param[in] type The cellular pdn type
+ * @return @c 0 on success,
+ * otherwise negative error value
+ * @retval #CONNECTION_ERROR_NONE Successful
+ * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
+ * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
+ * @retval #CONNECTION_ERROR_NOT_SUPPORTED Not supported
*/
-int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
+int connection_profile_set_cellular_roam_pdn_type(connection_profile_h profile,
+ connection_cellular_pdn_type_e type);
+
/**
* @}
#ifdef __cplusplus
}
+
#endif
+
#endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */
projects / platform / core / api / connection.git / blobdiff