+++ /dev/null
-mmfw-sysconf (0.1.22-0) unstable; urgency=low
-
- * Initial release
- * Git: pkgs/m/mmfw-sysconf
- * Tag: mmfw-sysconf_0.1.22-0
-
- -- Seongho Jeong <sh33.jeong@samsung.com> Fri, 03 Feb 2012 15:17:36 +0900
+++ /dev/null
-Source: mmfw-sysconf
-Section: misc
-Priority: extra
-Maintainer: Jonghyuk Choi <jhchoi.choi@samsung.com>, Younghwan An <younghwan_.an@samsung.com>, Kwanghui Cho <kwanghui.cho@samsung.com>, Seungbae Shin <seungbae.shin@samsung.com>, Younghun Kim <yh8004.kim@samsung.com>, Jeongmo Yang <jm80.yang@samsung.com>, Yejin Cho <cho.yejin@samsung.com>, Sangchul Lee <sc11.lee@samsung.com>
-Build-Depends: debhelper (>= 5)
-Standards-Version: 3.7.2
-
-Package: mmfw-sysconf-cleansdk-target
-Architecture: armel
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Multimedia Framework system configuration package for clean SDK target binary
-
-Package: mmfw-sysconf-simulator
-Architecture: i386
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Multimedia Framework system configuration package for simulator
-
+++ /dev/null
-Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved.
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
\ No newline at end of file
+++ /dev/null
-#!/usr/bin/make -f
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-
-configure: configure-stamp
-configure-stamp:
- dh_testdir
- touch configure-stamp
-
-build: build-stamp
-
-build-stamp: configure-stamp
- dh_testdir
- touch $@
-
-clean:
- dh_testdir
- dh_testroot
- rm -f build-stamp configure-stamp
- dh_clean
-
-install: build
- dh_testdir
- dh_testroot
- dh_clean -k
- dh_installdirs
-
- mkdir -p $(CURDIR)/debian/tmp$(PREFIX)
-
- # architecture
- ifneq (, $(findstring arm, $(DEB_HOST_ARCH)))
- # ARM
- cp -af $(CURDIR)/mmfw-sysconf-cleansdk-target/* $(CURDIR)/debian/mmfw-sysconf-cleansdk-target
- else
- # OTHER
- cp -af $(CURDIR)/mmfw-sysconf-simulator/* $(CURDIR)/debian/mmfw-sysconf-simulator
- endif
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
- dh_testdir
- dh_testroot
- dh_installchangelogs
- dh_installdocs
-# dh_installexamples
- dh_install --sourcedir=debian/tmp
-# dh_installmenu
-# dh_installdebconf
-# dh_installlogrotate
-# dh_installemacsen
-# dh_installpam
-# dh_installmime
-# dh_python
-# dh_installinit
-# dh_installcron
-# dh_installinfo
-# dh_installman
-# dh_link
-# dh_strip
- dh_compress
- dh_fixperms
-# dh_perl
-# dh_makeshlibs
- dh_installdeb
- dh_shlibdeps
- dh_gencontrol -s
- dh_md5sums
- dh_builddeb -s
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure
+++ /dev/null
-# default sound configuration for c210
-
-pcm. !default {
- type hw
- card 0
-}
-
-ctl. !default {
- type hw
- card 0
-}
-
-pcm. AIF2{
- type hw
- card 0
- device 1
-}
-
-pcm. AIF3{
- type hw
- card 0
- device 3
-}
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-; default-server =
-
-; autospawn = yes
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-realtime-scheduling = yes
-realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file =
-
-log-target = dlog-color
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = ffmpeg
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-; flat-volumes = yes
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically (it's probably better to not load
-### these drivers manually, but instead use module-hal-detect --
-### see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-#load-module module-udev-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack udev support)
-#load-module module-detect
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP reciever module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-load-module module-console-kit
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=bell-windowing-system
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-hal-detect.so
-#load-module module-hal-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack HAL support)
-load-module module-detect
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-load-module module-bluetooth-discover
-
-### Custom policy module to route between bt<=speaker
-load-module module-policy
-
-### Automatically restore the volume of streams and devices
-#load-module module-stream-restore
-#load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-set-default-source alsa_input.0.analog-stereo
-
-load-module module-remap-sink sink_name=mono_alsa master=alsa_output.0.analog-stereo channels=1
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - aquila_FUJITSU_M5MOLS
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-
-[AudioInput]
-AudiosrcElement = avsysaudiosrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0
-AudiomodemsrcElement = audiotestsrc | 2,0 | do-timestamp,1 | slave-method,3
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; Videosink
-;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface
-Videosink = 0,1,3 || 0
-VideosinkElementX = xvimagesink | 5,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0
-VideosinkElementEvas = evasimagesink | 0,0
-VideosinkElementNull = fakesink | 2,0 | qos,0 | sync,0
-UseVideoscale = 0
-VideoscaleElement = fimcconvert | 1,0 | rotang,90
-
-[VideoEncoder]
-H263 = ffenc_h263 | 0,0
-MPEG4 = ffenc_mpeg4 | 0,0
-THEORA = theoraenc | 1,0 | num-bufs,4
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-WAVE = wavenc | 0,0
-VORBIS = vorbisenc | 0,0
-
-[ImageEncoder]
-JPEG = secjpeg_enc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-;3GP = ffmux_3gp_ext | 0,0
-3GP = ffmux_3gp | 0,0
-;AMR = ffmux_amr_ext | 0,0
-AMR = ffmux_amr | 0,0
-;MP4 = ffmux_mp4_ext | 0,0
-MP4 = ffmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - aquila_FUJITSU_M5MOLS
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = 0,-255 || 0
-DeviceName = m5mols_c210
-PreviewResolution = 128,96 | 160,120 | 176,144 | 176,176 | 240,320 | 320,240 | 240,400 | 400,240 | 352,288 | 480,360 | 640,360 | 640,480 | 720,480 | 800,480 | 800,600 | 1280,720 | 1920,1080 || 640,480
-CaptureResolution = 640,480 | 800,480 | 1280,720 | 1600,1200 | 1920,1080 | 2048,1536 | 2560,1536 | 2560,1920 | 3264,1836 | 3264,2448 || 2560,1920
-FPS = 0,8,15,24,25,30,60,120 || 30
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-PictureFormat = 4,7 || 7
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 3
-; Recommand preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 7
-; Recommand preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 7
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,3,2,-255,-255,-255,-255,4 || 2
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 0,8 || 4
-;Contrast = 1,7 || 4
-Saturation = 0,4 || 2
-Sharpness = 0,4 || 2
-
-; White balance - real setting value
-;;; 0:BASE, 1:AUTO, 2:SUNNY, 3:CLOUDY, 4:TUNGSTEN, 5:FLUORESCENT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1
-
-; Color tone - real setting value
-;;; 0:NONE, 1:SEPIA, 2:ANTIQUE, 3:NEGATIVE, 4:EMBOSS, 5:GRAY, 6:OUTLINE, 7:SOLARIZATION
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION_1, 19:SOLARIZATION_2, 20:SOLARIZATION_3,
-;;; 21:SOLARIZATION_4, 22:SKETCH_1, 23:SKETCH_2, 24:SKETCH_3, 25:SKETCH_4
-;ColorTone = 1,-255,3,2,11,6,5,18,-255,-255,3,4,10,-255,-255,-255,-255,16,17,12,13,14,15,-255,-255,-255,-255 || 0
-ColorTone = 0,-255,1,3,-255,-255,-255,-255,-255,5,-255,2,-255,-255,-255,-255,4,6,7,-255,-255,-255,-255,-255,-255,-255 || 0
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 1:OFF, 2:ON, 3:AUTO
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 1,2,3 || 3
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-DigitalZoom = 0,30 || 0
-;OpticalZoom - Not support
-
-; Focus mode - real setting value
-;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = 0,2,0,1,3,4 || 3
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = -255,0,1,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1
-
-;ExposureValue = 1,9 || 5
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600(Not Supported), 7:SPORTS(Not Supported), 8:NIGHT(Not Supported), 9:MOVIE(Not Supported)
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,1,2,3,4,5,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 0:BASE, 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
-;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 1,2,5,6,7,-255,9,10,11,3,12,13,-255,14,4 || 1
-
-; Anti-handshake - real setting value
-;;; 0:OFF, 1:Capture, 2:Movie
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-;AntiHandshake = 0,1,-255,2 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-OutputMode = 4,7,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 1
-
-
-[Detect]
-; Detect mode
-;;; No need to convert
-;;; 0:OFF, 1:ON
-;DetectMode = 0,1 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - aquila_FUJITSU_M5MOLS - VGA camera
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = -255,1 || 1
-DeviceName = m4mo_VGA_c210
-PreviewResolution = 176,144 | 320,240 | 400,240 | 352,288 | 640,480 || 640,480
-CaptureResolution = 176,144 | 320,240 | 400,240 | 352,288 | 640,480 || 640,480
-FPS = 0,8,15,25,30 || 15
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-PictureFormat = 4,7 || 7
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 3
-; Recommand preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 7
-; Recommand preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 7
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,-255,-255,-255,-255,-255,-255,-255 || 1
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 0,8 || 4
-;Contrast = 1,7 || 4
-Saturation = 0,4 || 2
-Sharpness = 0,4 || 2
-
-; White balance - real setting value
-;;; 0:BASE, 1:AUTO, 2:SUNNY, 3:CLOUDY, 4:TUNGSTEN, 5:FLUORESCENT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1
-
-; Color tone - real setting value
-;0:NONE, 1:SEPIA, 2:ANTIQUE, 3:NEGATIVE, 4:EMBOSS, 5:GRAY, 6:OUTLINE, 7:SOLARIZATION
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION_1, 19:SOLARIZATION_2, 20:SOLARIZATION_3,
-;;; 21:SOLARIZATION_4, 22:SKETCH_1, 23:SKETCH_2, 24:SKETCH_3, 25:SKETCH_4
-ColorTone = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 1:OFF, 2:ON, 3:AUTO
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 1,2,3 || 3
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-DigitalZoom = 0,30 || 0
-;OpticalZoom - Not support
-
-; Focus mode - real setting value
-;;; Not Support, no need to convert
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = 0,-255,-255,-255,-255,-255 || 0
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = 0,-255,-255,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
-; Auto exposure mode - MSL value(convert array index)
-;;; 0:OFF, 1:ALL, 2:CENTER1, 3:CENTER2, 4:CENTER3, 5:SPOT1, 6:SPOT2, 7:CUSTOM1, 8:CUSTOM2
-AEType = -255,1,2,-255,-255,5,-255,-255,-255 || 1
-
-;ExposureValue = 1,9 || 5
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600(Not Supported), 7:SPORTS(Not Supported), 8:NIGHT(Not Supported), 9:MOVIE(Not Supported)
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,1,2,3,4,5,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 0:BASE, 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
-;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 1,2,5,6,7,-255,9,10,11,3,12,13,-255,14,4 || 1
-
-; Anti-handshake - real setting value
-;;; 1:OFF, 2:ON, 3:AUTO, 4:MOVIE_ON
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-;AntiHandshake = 1,2,3,4 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-OutputMode = 4,7,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 0
-
-
-[Detect]
-; Detect mode
-;;; No need to convert
-;;; 0:OFF, 1:ON
-;DetectMode = 0,1 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-[general]
-
-; if disabled typefind element will used directely
-use decodebin = no ; async state change problem exist
-
-use sink handler = yes
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default video sink but, it can be replaced with others selected by application
-; 0:v4l2sink, 1:ximagesink, 2:xvimagesink, 3:fakesink 4:evasimagesink 5:glimagesink
-videosink element = 2
-
-video converter element = ffmpegcolorspace
-
-audiosink element = avsysaudiosink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = omx
-
-async start = yes
-
-multiple codec supported = no
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 4 ; sec
-
-; delay in msec for sending EOS
-eos delay = 150 ; msec
-
-
-[http streaming]
-
-httppsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /opt/media
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-
-
-[rtsp streaming]
-
-rtspsrc element = rtspsrc
-
-rtsp buffering time = 5000; msec
-
-rtsp rebuffering time = 15000; msec
-
-rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
-
-rtsp error concealment = yes
-
-
-[hw accelation]
-use video hw accel = no
-
-
-[features]
-
-audio filter = no
-
-
-[priority]
-
-use priority setting = no
-
-demux = 95
-
-videosink = 96
-
-audiosink = 97
-
-ringbuffer = 98
-
-
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'Aux' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'FM' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-radio
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic/Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-name = analog-input-microphone
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common element for all microphone inputs
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Mic Select'
-
-[Element Mic Select]
-enumeration = select
-
-[Option Mic Select:Mic1]
-name = input-microphone
-priority = 20
-
-[Option Mic Select:Mic2]
-name = input-microphone
-priority = 19
-
-;;; Various Boosts
-
-[Element Mic Boost (+20dB)]
-switch = select
-volume = merge
-
-[Option Mic Boost (+20dB):on]
-name = input-boost-on
-
-[Option Mic Boost (+20dB):off]
-name = input-boost-off
-
-[Element Mic Boost]
-switch = select
-volume = merge
-
-[Option Mic Boost:on]
-name = input-boost-on
-
-[Option Mic Boost:off]
-name = input-boost-off
-
-[Element Front Mic Boost]
-switch = select
-
-[Option Front Mic Boost:on]
-name = input-boost-on
-
-[Option Front Mic Boost:off]
-name = input-boost-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'TV Tuner' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-video
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Video' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV
-; Tuner/FM elements
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Capture]
-required = volume
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required-absent = any
-
-[Element Line]
-required-absent = any
-
-[Element Aux]
-required-absent = any
-
-[Element Video]
-required-absent = any
-
-[Element Mic/Line]
-required-absent = any
-
-[Element TV Tuner]
-required-absent = any
-
-[Element FM]
-required-absent = any
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Mixer path for PulseAudio's ALSA backend, common elements for all
-; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distuingish them, in the same
-; order they appear here.
-;
-; Source selection should use the following names:
-;
-; input -- If we don't know the exact kind of input
-; input-microphone
-; input-microphone-internal
-; input-microphone-external
-; input-linein
-; input-video
-; input-radio
-; input-docking-microphone
-; input-docking-linein
-; input-docking
-;
-; We explicitly don't want to wrap the following sources:
-;
-; CD
-; Synth/MIDI
-; Phone
-; Mix
-; Digital/SPDIF
-; Master
-; PC Speaker
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Input Source Select'
-
-[Element Input Source Select]
-enumeration = select
-
-[Option Input Source Select:Input1]
-name = input
-priority = 10
-
-[Option Input Source Select:Input2]
-name = input
-priority = 5
-
-;;; 'Input Source'
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Mic]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Microphone]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Front Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Front Microphone]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Internal Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Line]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line-In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Docking-Station]
-name = input-docking
-priority = 17
-
-[Option Input Source:AUX IN]
-name = input
-priority = 10
-
-;;; 'Capture Source'
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:TV Tuner]
-name = input-video
-
-[Option Capture Source:FM]
-name = input-radio
-
-[Option Capture Source:Mic/Line]
-name = input
-
-[Option Capture Source:Line/Mic]
-name = input
-
-[Option Capture Source:Mic]
-name = input-microphone
-
-[Option Capture Source:Microphone]
-name = input-microphone
-
-[Option Capture Source:Int Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Int DMic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Mic]
-name = input-microphone-internal
-
-[Option Capture Source:iMic]
-name = input-microphone-internal
-
-[Option Capture Source:i-Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Microphone]
-name = input-microphone-internal
-
-[Option Capture Source:Front Mic]
-name = input-microphone
-
-[Option Capture Source:Front Microphone]
-name = input-microphone
-
-[Option Capture Source:Rear Mic]
-name = input-microphone
-
-[Option Capture Source:Mic1]
-name = input-microphone
-
-[Option Capture Source:Mic2]
-name = input-microphone
-
-[Option Capture Source:D-Mic]
-name = input-microphone
-
-[Option Capture Source:IntMic]
-name = input-microphone-internal
-
-[Option Capture Source:ExtMic]
-name = input-microphone-external
-
-[Option Capture Source:Ext Mic]
-name = input-microphone-external
-
-[Option Capture Source:E-Mic]
-name = input-microphone-external
-
-[Option Capture Source:e-Mic]
-name = input-microphone-external
-
-[Option Capture Source:LineIn]
-name = input-linein
-
-[Option Capture Source:Analog]
-name = input
-
-[Option Capture Source:Line]
-name = input-linein
-
-[Option Capture Source:Line-In]
-name = input-linein
-
-[Option Capture Source:Line In]
-name = input-linein
-
-[Option Capture Source:Video]
-name = input-video
-
-[Option Capture Source:Aux]
-name = input
-
-[Option Capture Source:Aux0]
-name = input
-
-[Option Capture Source:Aux1]
-name = input
-
-[Option Capture Source:Aux2]
-name = input
-
-[Option Capture Source:Aux3]
-name = input
-
-[Option Capture Source:AUX IN]
-name = input
-
-[Option Capture Source:Aux In]
-name = input
-
-[Option Capture Source:AOUT]
-name = input
-
-[Option Capture Source:AUX]
-name = input
-
-[Option Capture Source:Cam Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 1]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 2]
-name = input-microphone
-
-[Option Capture Source:Analog Inputs]
-name = input
-
-[Option Capture Source:Unknown1]
-name = input
-
-[Option Capture Source:Unknown2]
-name = input
-
-[Option Capture Source:Docking-Station]
-name = input-docking
-
-[Option Capture Source:Dock Mic]
-name = input-docking-microphone
-
-;;; 'Mic Jack Mode'
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-name = input-microphone
-
-[Option Mic Jack Mode:Line In]
-name = input-linein
-
-;;; 'Digital Input Source'
-
-[Element Digital Input Source]
-enumeration = select
-
-[Option Digital Input Source:Analog Inputs]
-name = input
-
-[Option Digital Input Source:Digital Mic 1]
-name = input-microphone
-
-[Option Digital Input Source:Digital Mic 2]
-name = input-microphone
-
-;;; Various Boosts
-
-[Element Capture Boost]
-switch = select
-
-[Option Capture Boost:on]
-name = input-boost-on
-
-[Option Capture Boost:off]
-name = input-boost-off
-
-[Element Auto Gain Control]
-switch = select
-
-[Option Auto Gain Control:on]
-name = input-agc-on
-
-[Option Auto Gain Control:off]
-name = input-agc-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone2' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the second headphones, not
-; the first headphones. But it should not hurt if we leave the
-; headphone jack enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Headphone]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage in laptops that have a seperate LFE speaker
-; connected to the Master mono connector
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 40
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all-no-lfe
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage on boards that have a seperate Mono output plug.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 50
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = off
-volume = off
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Speaker' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for the 'default' output. Note that a-o-speaker.conf has a
-; higher priority than this
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-
-[Element Hardware Master]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = ignore
-volume = ignore
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the default output, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = ignore
-volume = zero
-
-[Element Headphone2]
-switch = ignore
-volume = zero
-
-[Element Speaker]
-switch = ignore
-volume = off
-
-[Element Front]
-switch = ignore
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = ignore
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = ignore
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = ignore
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common part of all paths
-
-; So here's generally how mixer paths are used by PA: PA goes through
-; a mixer path file from top to bottom and checks if a mixer element
-; described therein exists. If so it is added to the list of mixer
-; elements PA will control, keeping the order it read them in. If a
-; mixer element described here has set the required= or
-; required-absent= directives a path might not be accepted as valid
-; and is ignored in its entirety (see below). However usually if a
-; element listed here is missing this one element is ignored but not
-; the entire path.
-;
-; When a device shall be muted/unmuted *all* elements listed in a path
-; file with "switch = mute" will be toggled.
-;
-; When a device shall change its volume, PA will got through the list
-; of all elements with "volume = merge" and set the volume on the
-; first element. If that element does not support dB volumes, this is
-; where the story ends. If it does support dB volumes, PA divides the
-; requested volume by the volume that was set on this element, and
-; then go on to the next element with "volume = merge" and then set
-; that there, and so on. That way the first volume element in the
-; path will be the one that does the 'biggest' part of the overall
-; volume adjustment, with the remaining elements usually being set to
-; some value next to 0dB. This logic makes sure we get the full range
-; over all volume sliders and a very high granularity of volumes
-; already in hardware.
-;
-; All switches and enumerations set to "select" are exposed via the
-; "port" functionality of sinks/sources. Basically every possible
-; switch setting and every possible enumeration setting will be
-; combined and made into a "port". So make sure you don't list too
-; many switches/enums for exposing, because the number of ports might
-; rise exponentially.
-;
-; Only one path can be selected at a time. All paths that are valid
-; for an audio device will be exposed as "port" for the sink/source.
-
-
-; [General]
-; priority = ... # Priority for this path
-; description = ...
-;
-; [Option ...:...] # For each option of an enumeration or switch element
-; # that shall be exposed as a sink/source port. Needs to
-; # be named after the Element, followed by a colon, followed
-; # by the option name, resp. on/off if the element is a switch.
-; name = ... # Logical name to use in the path identifier
-; priority = ... # Priority if this is made into a device port
-;
-; [Element ...] # For each element that we shall control
-; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
-; # otherwise don't consider this path valid for the card
-; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
-; # available, otherwise don't consider this path valid for the card
-;
-; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
-; # always set it to off, always to on, or make it selectable as port.
-; # If set to 'select' you need to define an Option section for on
-; # and off
-; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device
-; # volume slider, always set it to the lowest value possible, or always
-; # set it to 0 dB (for whatever that means)
-; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
-; # via device ports. If set to 'select' you need to define an Option section
-; # for each of the items you want to expose
-; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
-; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
-; # unless you have a broken driver that has playback controls marked for capture or vice
-; # versa
-; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
-;
-; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
-; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
-; # Override maps should list for each element channel which high-level channels it controls via a
-; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
-; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
-; # channels in a mask
-
-[Element PCM]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element External Amplifier]
-switch = select
-
-[Option External Amplifier:on]
-name = output-amplifier-on
-priority = 10
-
-[Option External Amplifier:off]
-name = output-amplifier-off
-priority = 0
-
-;;; 'Analog Output'
-
-[Element Analog Output]
-enumeration = select
-
-[Option Analog Output:Speakers]
-name = output-speaker
-priority = 10
-
-[Option Analog Output:Headphones]
-name = output-headphones
-priority = 9
-
-[Option Analog Output:FP Headphones]
-name = output-headphones
-priority = 8
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned. (and should be good enough for the vast majority of
-; cards). Use the udev property PULSE_PROFILE_SET to assign a
-; different profile set than this one to a device. So what is this
-; about? Simply, what we do here is map ALSA devices to how they are
-; exposed in PA. We say which ALSA device string to use to open a
-; device, which channel mapping to use then, and which mixer path to
-; use. This is encoded in a 'mapping'. Multiple of these mappings can
-; be bound together in a 'profile' which is then directly exposed in
-; the UI as a card profile. Each mapping assigned to a profile will
-; result in one sink/source to be created if the profile is selected
-; for the card.
-
-; [General]
-; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
-; # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ... # Channel mapping to use for this device
-; description = ...
-; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
-; # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ... # Instead of configuring a full mixer path simply configure a single
-; # mixer element for volume/mute handling
-; element-output = ...
-; priority = ...
-; direction = any | input | output # Only useful for?
-;
-; [Profile id]
-; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
-; # defined in this file too
-; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
-; # defined in this file too
-; description = ...
-; priority = ... # Numeric value to deduce priority for this profile
-; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
-; # will be assumed as working without probing. Makes initialization
-; # a bit faster but only works if the card is really known well.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:0
-channel-map = mono
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:0
-channel-map = left,right
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-priority = 5
-
-[Mapping iec958-surround-40]
-device-strings = iec958:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 1
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-device-strings = hdmi:%f
-channel-map = left,right
-priority = 4
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 4 DJ
-;
-; This card has two stereo pairs of input and two stereo pairs of
-; output, named channels A and B. Channel B has an additional
-; Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B (Headphones)
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b-input]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b-output
-input-mappings = analog-stereo-a analog-stereo-b-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-input-mappings = analog-stereo-b-input
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b-input
-priority = 1
-skip-probe = yes
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 8 DJ
-;
-; This card has four stereo pairs of input and four stereo pairs of
-; output, named channels A to D. Channel C has an additional Mic/Line
-; connector, channel D an additional Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-
-# Since we want to set a different description for channel C's/D's input
-# and output we define two seperate mappings for them
-[Mapping analog-stereo-c-output]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C (Line/Mic)
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-output]
-description = Analog Stereo Channel D (Headphones)
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-c]
-description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-c-input
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
-description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
-output-mappings = analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 80
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-b
-input-mappings = analog-stereo-b
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-c+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C (Line/Mic)
-output-mappings = analog-stereo-c-output
-input-mappings = analog-stereo-c-input
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-d-input
-priority = 70
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 6
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-c]
-description = Analog Stereo Output Channel C
-output-mappings = analog-stereo-c-output
-priority = 7
-skip-probe = yes
-
-[Profile output:analog-stereo-d]
-description = Analog Stereo Output Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-priority = 8
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b
-priority = 1
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C (Line/Mic)
-input-mappings = analog-stereo-c-input
-priority = 4
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 3
-skip-probe = yes
+++ /dev/null
-# default sound configuration for simulator
-
-pcm. !default {
- type hw
- card 0
-}
-
-ctl. !default {
- type hw
- card 0
-}
-
-pcm. AIF2{
- type hw
- card 0
- device 1
-}
-
-pcm. AIF3{
- type hw
- card 0
- device 3
-}
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-; default-server =
-
-; autospawn = yes
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-realtime-scheduling = yes
-realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file =
-
-log-target = dlog-color
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = ffmpeg
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-; flat-volumes = yes
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically (it's probably better to not load
-### these drivers manually, but instead use module-hal-detect --
-### see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-#load-module module-udev-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack udev support)
-#load-module module-detect
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP reciever module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-load-module module-console-kit
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=bell-windowing-system
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-hal-detect.so
-#load-module module-hal-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack HAL support)
-load-module module-detect
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-load-module module-bluetooth-discover
-
-### Custom policy module to route between bt<=speaker
-load-module module-policy
-
-### Automatically restore the volume of streams and devices
-#load-module module-stream-restore
-#load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-set-default-source alsa_input.0.analog-stereo
-
-load-module module-remap-sink sink_name=mono_alsa master=alsa_output.0.analog-stereo channels=1
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - SDK Camera
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-debug=3,avsysvideosrc:4 || NOT-USE-DEFAULT_VALUE
-ModelName = TIZEN_SDK
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-;VideosrcElement = avsysvideosrc | 3,0 | do-timestamp,1 | use-pad-alloc,1 | num-alloc-buf,5
-VideosrcElement = v4l2src | 1,1 | do-timestamp,1 | device,/dev/video0
-;VideosrcElement = videotestsrc | 0,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-
-[AudioInput]
-AudiosrcElement = avsysaudiosrc | 2,0 | do-timestamp,1 | slave-method,3
-AudiomodemsrcElement = audiotestsrc | 2,0 | do-timestamp,1 | is-live,1
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; Videosink
-;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface
-Videosink = 0,1,3 || 0
-;VideosinkElementX = ximagesink | 4,0 | force-aspect-ratio,1 | handle-events,1 | qos,0 | sync,0
-VideosinkElementX = xvimagesink | 5,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0
-VideosinkElementEvas = evasimagesink | 0,0
-;VideosinkElementGL = glimagesink | 0,0
-VideosinkElementNull = fakesink | 2,0 | qos,0 | sync,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[VideoEncoder]
-H263 = emulenc_h263 | 0,0
-MPEG4 = emulenc_mpeg4 | 0,0
-THEORA = theoraenc | 1,0 | num-bufs,4
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-WAVE = wavenc | 0,0
-VORBIS = vorbisenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 1
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 0
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-;3GP = ffmux_3gp_ext | 0,0
-3GP = ffmux_3gp | 0,0
-;AMR = ffmux_amr_ext | 0,0
-AMR = ffmux_amr | 0,0
-;MP4 = ffmux_mp4_ext | 0,0
-MP4 = ffmux_mp4 | 0,0
-OGG = oggmux | 0,0
-WAV = wavenc | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - SDK Camera. Mega Camera.
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = 0,-255 || 0
-DeviceName = virtual driver
-PreviewResolution = 160,120 | 176,144 | 320,240 | 352,288 | 640,480 || 640,480
-CaptureResolution = 160,120 | 176,144 | 320,240 | 352,288 | 640,480 || 640,480
-FPS = 30 || 30
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-PictureFormat = 4,7,8 || 4
-Overlay = 0,1 || 1
-; Recommand preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 7
-; Recommand preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 7
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,-255,-255,-255,-255,-255,-255,-255 || 1
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 1,20 || 10
-Contrast = 1,20 || 10
-Saturation = 1,20 || 10
-Sharpness = 1,20 || 10
-
-; White balance - real setting value
-;;; 0:AUTO, 1:INCANDESCENT, 2:FLUORESCENT_HIGH, 3:FLUORESCENT_LOW, 4:DAYLIGHT, 5:CLOUDY, 6:SHADE, 7:HORIZON, 8:CUSTOM , 9:LED_LIGHT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUOROSCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-;WhiteBalance = -255,1,4,5,3,2,6,7,-255,-255 || 1
-;WhiteBalance = -255,0,4,5,2,1,6,7,9,8 || 0
-
-; Color tone - real setting value
-;;; 0:NONE, 1:SEPIA, 2:ANTIQUE, 3:NEGATIVE, 4:EMBOSS, 5:GRAY, 6:OUTLINE, 7:SOLARIZATION
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:REC,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION_1, 19:SOLARIZATION_2, 20:SOLARIZATION_3,
-;;; 21:SOLARIZATION_4, 22:SKETCH_1, 23:SKETCH_2, 24:SKETCH_3, 25:SKETCH_4
-;ColorTone = 1,-255,3,2,11,6,5,18,-255,-255,3,4,10,-255,-255,-255,-255,16,17,12,13,14,15,-255,-255,-255,-255 || 0
-;ColorTone = 0,-255,1,3,-255,-255,-255,-255,-255,5,-255,2,-255,-255,-255,-255,4,6,7,-255,-255,-255,-255,-255,-255,-255 || 0
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 1:OFF, 2:ON, 3:AUTO
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-;WDR = 1,2,3 || 3
-
-; Part color mode - real setting value
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-; Part color mode - MSL value(convert array index)
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-;PartColorMode = 0,1,2 || 0
-
-; Part color - real setting value
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-; Part color - MSL value(convert array index)
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-;DigitalZoom = 10,30 || 10
-;OpticalZoom - Not support
-
-; Focus mode - real setting value
-;;; Not Support, no need to convert
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-;FocusMode = 0,2,0,1,3,4 || 3
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-;AFType = -255,0,1,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 1,ALL 2,CENTER 3,SPOT
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-;AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1
-
-;ExposureValue = 1,9 || 5
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600(Not Supported), 7:3200(Not Supported)
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-;ISO = 0,1,2,3,4,5,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 0:NONE, 1:FALL_COLOR, 2:DUSK_N_DAWN, 3:CANDLE_LIGHT, 4:BEACH_SNOW, 5:BACKLIGHT, 6:LANDSCAPE, 7:NIGHT_SCENE, 8:PORTRAIT, 9:SPORTS, 10:INDOOR,
-;;; 11:FIREWORK, 12:TEXT, 13:SHOW_WINDOW
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-;ProgramMode = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 || 1
-;ProgramMode = 0,8,6,9,10,4,-255,2,1,7,11,12,13,3,5 || 0
-
-; Anti-handshake - real setting value
-;;; 0:OFF, 1:Capture, 2:Movie
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-;AntiHandshake = 0,1,-255,2 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-OutputMode = 4,7,8,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 0
-
-
-[Detect]
-; Detect mode
-;;; No need to convert
-;;; 0:OFF, 1:ON
-;DetectMode = 0,1 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - SDK Camera - VGA Camera
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = -255,0 || 0
-DeviceName = virtual driver
-PreviewResolution = 160,120 | 176,144 | 320,240 | 352,288 | 640,480 || 640,480
-CaptureResolution = 160,120 | 176,144 | 320,240 | 352,288 | 640,480 || 640,480
-FPS = 30 || 30
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-PictureFormat = 4,7,8 || 4
-Overlay = 0,1 || 1
-; Recommand preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 7
-; Recommand preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 7
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,-255,-255,-255,-255,-255,-255,-255 || 1
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 1,20 || 10
-Contrast = 1,20 || 10
-Saturation = 1,20 || 10
-Sharpness = 1,20 || 10
-
-; White balance - real setting value
-;;; 0:AUTO, 1:INCANDESCENT, 2:FLUORESCENT_HIGH, 3:FLUORESCENT_LOW, 4:DAYLIGHT, 5:CLOUDY, 6:SHADE, 7:HORIZON, 8:CUSTOM , 9:LED_LIGHT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUOROSCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-;WhiteBalance = -255,1,4,5,3,2,6,7,-255,-255 || 1
-;WhiteBalance = -255,0,4,5,2,1,6,7,9,8 || 0
-
-; Color tone - real setting value
-;;; 0:NONE, 1:SEPIA, 2:ANTIQUE, 3:NEGATIVE, 4:EMBOSS, 5:GRAY, 6:OUTLINE, 7:SOLARIZATION
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:REC,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION_1, 19:SOLARIZATION_2, 20:SOLARIZATION_3,
-;;; 21:SOLARIZATION_4, 22:SKETCH_1, 23:SKETCH_2, 24:SKETCH_3, 25:SKETCH_4
-;ColorTone = 1,-255,3,2,11,6,5,18,-255,-255,3,4,10,-255,-255,-255,-255,16,17,12,13,14,15,-255,-255,-255,-255 || 0
-;ColorTone = 0,-255,1,3,-255,-255,-255,-255,-255,5,-255,2,-255,-255,-255,-255,4,6,7,-255,-255,-255,-255,-255,-255,-255 || 0
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 1:OFF, 2:ON, 3:AUTO
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-;WDR = 1,2,3 || 3
-
-; Part color mode - real setting value
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-; Part color mode - MSL value(convert array index)
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-;PartColorMode = 0,1,2 || 0
-
-; Part color - real setting value
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-; Part color - MSL value(convert array index)
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-;DigitalZoom = 10,30 || 10
-;OpticalZoom - Not support
-
-; Focus mode - real setting value
-;;; Not Support, no need to convert
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-;FocusMode = 0,2,0,1,3,4 || 3
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-;AFType = -255,0,1,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 1,ALL 2,CENTER 3,SPOT
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-;AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1
-
-;ExposureValue = 1,9 || 5
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600(Not Supported), 7:3200(Not Supported)
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-;ISO = 0,1,2,3,4,5,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 0:NONE, 1:FALL_COLOR, 2:DUSK_N_DAWN, 3:CANDLE_LIGHT, 4:BEACH_SNOW, 5:BACKLIGHT, 6:LANDSCAPE, 7:NIGHT_SCENE, 8:PORTRAIT, 9:SPORTS, 10:INDOOR,
-;;; 11:FIREWORK, 12:TEXT, 13:SHOW_WINDOW
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-;ProgramMode = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 || 1
-;ProgramMode = 0,8,6,9,10,4,-255,2,1,7,11,12,13,3,5 || 0
-
-; Anti-handshake - real setting value
-;;; 0:OFF, 1:Capture, 2:Movie
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-;AntiHandshake = 0,1,-255,2 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-OutputMode = 4,7,8,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 0
-
-
-[Detect]
-; Detect mode
-;;; No need to convert
-;;; 0:OFF, 1:ON
-;DetectMode = 0,1 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-[general]
-
-; if disabled typefind element will used directely
-use decodebin = no ; async state change problem exist
-
-use sink handler = yes
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default video sink but, it can be replaced with others selected by application
-; 0:v4l2sink, 1:ximagesink, 2:xvimagesink, 3:fakesink 4:evasimagesink 5:glimagesink
-videosink element = 2
-
-video converter element = ffmpegcolorspace
-
-audiosink element = avsysaudiosink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword = ffdec_, omx
-
-async start = yes
-
-multiple codec supported = no
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 4 ; sec
-
-; delay in msec for sending EOS
-eos delay = 150 ; msec
-
-
-[http streaming]
-
-httppsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /opt/media
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-
-
-[rtsp streaming]
-
-rtspsrc element = rtspsrc
-
-rtsp buffering time = 5000; msec
-
-rtsp rebuffering time = 15000; msec
-
-rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
-
-rtsp error concealment = yes
-
-
-[hw accelation]
-use video hw accel = no
-
-
-[features]
-
-audio filter = no
-
-
-[priority]
-
-use priority setting = no
-
-demux = 95
-
-videosink = 96
-
-audiosink = 97
-
-ringbuffer = 98
-
-
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'Aux' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'FM' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-radio
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic/Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-name = analog-input-microphone
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common element for all microphone inputs
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Mic Select'
-
-[Element Mic Select]
-enumeration = select
-
-[Option Mic Select:Mic1]
-name = input-microphone
-priority = 20
-
-[Option Mic Select:Mic2]
-name = input-microphone
-priority = 19
-
-;;; Various Boosts
-
-[Element Mic Boost (+20dB)]
-switch = select
-volume = merge
-
-[Option Mic Boost (+20dB):on]
-name = input-boost-on
-
-[Option Mic Boost (+20dB):off]
-name = input-boost-off
-
-[Element Mic Boost]
-switch = select
-volume = merge
-
-[Option Mic Boost:on]
-name = input-boost-on
-
-[Option Mic Boost:off]
-name = input-boost-off
-
-[Element Front Mic Boost]
-switch = select
-
-[Option Front Mic Boost:on]
-name = input-boost-on
-
-[Option Front Mic Boost:off]
-name = input-boost-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'TV Tuner' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-video
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Video' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV
-; Tuner/FM elements
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Capture]
-required = volume
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required-absent = any
-
-[Element Line]
-required-absent = any
-
-[Element Aux]
-required-absent = any
-
-[Element Video]
-required-absent = any
-
-[Element Mic/Line]
-required-absent = any
-
-[Element TV Tuner]
-required-absent = any
-
-[Element FM]
-required-absent = any
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Mixer path for PulseAudio's ALSA backend, common elements for all
-; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distuingish them, in the same
-; order they appear here.
-;
-; Source selection should use the following names:
-;
-; input -- If we don't know the exact kind of input
-; input-microphone
-; input-microphone-internal
-; input-microphone-external
-; input-linein
-; input-video
-; input-radio
-; input-docking-microphone
-; input-docking-linein
-; input-docking
-;
-; We explicitly don't want to wrap the following sources:
-;
-; CD
-; Synth/MIDI
-; Phone
-; Mix
-; Digital/SPDIF
-; Master
-; PC Speaker
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Input Source Select'
-
-[Element Input Source Select]
-enumeration = select
-
-[Option Input Source Select:Input1]
-name = input
-priority = 10
-
-[Option Input Source Select:Input2]
-name = input
-priority = 5
-
-;;; 'Input Source'
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Mic]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Microphone]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Front Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Front Microphone]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Internal Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Line]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line-In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Docking-Station]
-name = input-docking
-priority = 17
-
-[Option Input Source:AUX IN]
-name = input
-priority = 10
-
-;;; 'Capture Source'
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:TV Tuner]
-name = input-video
-
-[Option Capture Source:FM]
-name = input-radio
-
-[Option Capture Source:Mic/Line]
-name = input
-
-[Option Capture Source:Line/Mic]
-name = input
-
-[Option Capture Source:Mic]
-name = input-microphone
-
-[Option Capture Source:Microphone]
-name = input-microphone
-
-[Option Capture Source:Int Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Int DMic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Mic]
-name = input-microphone-internal
-
-[Option Capture Source:iMic]
-name = input-microphone-internal
-
-[Option Capture Source:i-Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Microphone]
-name = input-microphone-internal
-
-[Option Capture Source:Front Mic]
-name = input-microphone
-
-[Option Capture Source:Front Microphone]
-name = input-microphone
-
-[Option Capture Source:Rear Mic]
-name = input-microphone
-
-[Option Capture Source:Mic1]
-name = input-microphone
-
-[Option Capture Source:Mic2]
-name = input-microphone
-
-[Option Capture Source:D-Mic]
-name = input-microphone
-
-[Option Capture Source:IntMic]
-name = input-microphone-internal
-
-[Option Capture Source:ExtMic]
-name = input-microphone-external
-
-[Option Capture Source:Ext Mic]
-name = input-microphone-external
-
-[Option Capture Source:E-Mic]
-name = input-microphone-external
-
-[Option Capture Source:e-Mic]
-name = input-microphone-external
-
-[Option Capture Source:LineIn]
-name = input-linein
-
-[Option Capture Source:Analog]
-name = input
-
-[Option Capture Source:Line]
-name = input-linein
-
-[Option Capture Source:Line-In]
-name = input-linein
-
-[Option Capture Source:Line In]
-name = input-linein
-
-[Option Capture Source:Video]
-name = input-video
-
-[Option Capture Source:Aux]
-name = input
-
-[Option Capture Source:Aux0]
-name = input
-
-[Option Capture Source:Aux1]
-name = input
-
-[Option Capture Source:Aux2]
-name = input
-
-[Option Capture Source:Aux3]
-name = input
-
-[Option Capture Source:AUX IN]
-name = input
-
-[Option Capture Source:Aux In]
-name = input
-
-[Option Capture Source:AOUT]
-name = input
-
-[Option Capture Source:AUX]
-name = input
-
-[Option Capture Source:Cam Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 1]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 2]
-name = input-microphone
-
-[Option Capture Source:Analog Inputs]
-name = input
-
-[Option Capture Source:Unknown1]
-name = input
-
-[Option Capture Source:Unknown2]
-name = input
-
-[Option Capture Source:Docking-Station]
-name = input-docking
-
-[Option Capture Source:Dock Mic]
-name = input-docking-microphone
-
-;;; 'Mic Jack Mode'
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-name = input-microphone
-
-[Option Mic Jack Mode:Line In]
-name = input-linein
-
-;;; 'Digital Input Source'
-
-[Element Digital Input Source]
-enumeration = select
-
-[Option Digital Input Source:Analog Inputs]
-name = input
-
-[Option Digital Input Source:Digital Mic 1]
-name = input-microphone
-
-[Option Digital Input Source:Digital Mic 2]
-name = input-microphone
-
-;;; Various Boosts
-
-[Element Capture Boost]
-switch = select
-
-[Option Capture Boost:on]
-name = input-boost-on
-
-[Option Capture Boost:off]
-name = input-boost-off
-
-[Element Auto Gain Control]
-switch = select
-
-[Option Auto Gain Control:on]
-name = input-agc-on
-
-[Option Auto Gain Control:off]
-name = input-agc-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone2' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the second headphones, not
-; the first headphones. But it should not hurt if we leave the
-; headphone jack enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Headphone]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage in laptops that have a seperate LFE speaker
-; connected to the Master mono connector
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 40
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all-no-lfe
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage on boards that have a seperate Mono output plug.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 50
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = off
-volume = off
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Speaker' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for the 'default' output. Note that a-o-speaker.conf has a
-; higher priority than this
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-
-[Element Hardware Master]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = ignore
-volume = ignore
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the default output, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = ignore
-volume = zero
-
-[Element Headphone2]
-switch = ignore
-volume = zero
-
-[Element Speaker]
-switch = ignore
-volume = off
-
-[Element Front]
-switch = ignore
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = ignore
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = ignore
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = ignore
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common part of all paths
-
-; So here's generally how mixer paths are used by PA: PA goes through
-; a mixer path file from top to bottom and checks if a mixer element
-; described therein exists. If so it is added to the list of mixer
-; elements PA will control, keeping the order it read them in. If a
-; mixer element described here has set the required= or
-; required-absent= directives a path might not be accepted as valid
-; and is ignored in its entirety (see below). However usually if a
-; element listed here is missing this one element is ignored but not
-; the entire path.
-;
-; When a device shall be muted/unmuted *all* elements listed in a path
-; file with "switch = mute" will be toggled.
-;
-; When a device shall change its volume, PA will got through the list
-; of all elements with "volume = merge" and set the volume on the
-; first element. If that element does not support dB volumes, this is
-; where the story ends. If it does support dB volumes, PA divides the
-; requested volume by the volume that was set on this element, and
-; then go on to the next element with "volume = merge" and then set
-; that there, and so on. That way the first volume element in the
-; path will be the one that does the 'biggest' part of the overall
-; volume adjustment, with the remaining elements usually being set to
-; some value next to 0dB. This logic makes sure we get the full range
-; over all volume sliders and a very high granularity of volumes
-; already in hardware.
-;
-; All switches and enumerations set to "select" are exposed via the
-; "port" functionality of sinks/sources. Basically every possible
-; switch setting and every possible enumeration setting will be
-; combined and made into a "port". So make sure you don't list too
-; many switches/enums for exposing, because the number of ports might
-; rise exponentially.
-;
-; Only one path can be selected at a time. All paths that are valid
-; for an audio device will be exposed as "port" for the sink/source.
-
-
-; [General]
-; priority = ... # Priority for this path
-; description = ...
-;
-; [Option ...:...] # For each option of an enumeration or switch element
-; # that shall be exposed as a sink/source port. Needs to
-; # be named after the Element, followed by a colon, followed
-; # by the option name, resp. on/off if the element is a switch.
-; name = ... # Logical name to use in the path identifier
-; priority = ... # Priority if this is made into a device port
-;
-; [Element ...] # For each element that we shall control
-; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
-; # otherwise don't consider this path valid for the card
-; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
-; # available, otherwise don't consider this path valid for the card
-;
-; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
-; # always set it to off, always to on, or make it selectable as port.
-; # If set to 'select' you need to define an Option section for on
-; # and off
-; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device
-; # volume slider, always set it to the lowest value possible, or always
-; # set it to 0 dB (for whatever that means)
-; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
-; # via device ports. If set to 'select' you need to define an Option section
-; # for each of the items you want to expose
-; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
-; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
-; # unless you have a broken driver that has playback controls marked for capture or vice
-; # versa
-; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
-;
-; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
-; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
-; # Override maps should list for each element channel which high-level channels it controls via a
-; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
-; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
-; # channels in a mask
-
-[Element PCM]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element External Amplifier]
-switch = select
-
-[Option External Amplifier:on]
-name = output-amplifier-on
-priority = 10
-
-[Option External Amplifier:off]
-name = output-amplifier-off
-priority = 0
-
-;;; 'Analog Output'
-
-[Element Analog Output]
-enumeration = select
-
-[Option Analog Output:Speakers]
-name = output-speaker
-priority = 10
-
-[Option Analog Output:Headphones]
-name = output-headphones
-priority = 9
-
-[Option Analog Output:FP Headphones]
-name = output-headphones
-priority = 8
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned. (and should be good enough for the vast majority of
-; cards). Use the udev property PULSE_PROFILE_SET to assign a
-; different profile set than this one to a device. So what is this
-; about? Simply, what we do here is map ALSA devices to how they are
-; exposed in PA. We say which ALSA device string to use to open a
-; device, which channel mapping to use then, and which mixer path to
-; use. This is encoded in a 'mapping'. Multiple of these mappings can
-; be bound together in a 'profile' which is then directly exposed in
-; the UI as a card profile. Each mapping assigned to a profile will
-; result in one sink/source to be created if the profile is selected
-; for the card.
-
-; [General]
-; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
-; # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ... # Channel mapping to use for this device
-; description = ...
-; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
-; # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ... # Instead of configuring a full mixer path simply configure a single
-; # mixer element for volume/mute handling
-; element-output = ...
-; priority = ...
-; direction = any | input | output # Only useful for?
-;
-; [Profile id]
-; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
-; # defined in this file too
-; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
-; # defined in this file too
-; description = ...
-; priority = ... # Numeric value to deduce priority for this profile
-; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
-; # will be assumed as working without probing. Makes initialization
-; # a bit faster but only works if the card is really known well.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:0
-channel-map = mono
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:0
-channel-map = left,right
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-priority = 5
-
-[Mapping iec958-surround-40]
-device-strings = iec958:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 1
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-device-strings = hdmi:%f
-channel-map = left,right
-priority = 4
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 4 DJ
-;
-; This card has two stereo pairs of input and two stereo pairs of
-; output, named channels A and B. Channel B has an additional
-; Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B (Headphones)
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b-input]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b-output
-input-mappings = analog-stereo-a analog-stereo-b-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-input-mappings = analog-stereo-b-input
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b-input
-priority = 1
-skip-probe = yes
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 8 DJ
-;
-; This card has four stereo pairs of input and four stereo pairs of
-; output, named channels A to D. Channel C has an additional Mic/Line
-; connector, channel D an additional Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-
-# Since we want to set a different description for channel C's/D's input
-# and output we define two seperate mappings for them
-[Mapping analog-stereo-c-output]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C (Line/Mic)
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-output]
-description = Analog Stereo Channel D (Headphones)
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-c]
-description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-c-input
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
-description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
-output-mappings = analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 80
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-b
-input-mappings = analog-stereo-b
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-c+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C (Line/Mic)
-output-mappings = analog-stereo-c-output
-input-mappings = analog-stereo-c-input
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-d-input
-priority = 70
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 6
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-c]
-description = Analog Stereo Output Channel C
-output-mappings = analog-stereo-c-output
-priority = 7
-skip-probe = yes
-
-[Profile output:analog-stereo-d]
-description = Analog Stereo Output Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-priority = 8
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b
-priority = 1
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C (Line/Mic)
-input-mappings = analog-stereo-c-input
-priority = 4
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 3
-skip-probe = yes
+++ /dev/null
-Name: mmfw-sysconf
-Summary: Multimedia Framework system configuration package
-Version: 0.1.22
-Release: 3
-Group: TO_BE/FILLED_IN
-License: Apache-2.0
-Source0: %{name}-%{version}.tar.gz
-
-%description
-Multimedia Framework system configuration package
-
-%ifarch %{arm}
-%package -n mmfw-sysconf-cleansdk-target
-Summary: Multimedia Framework system configuration package for clean SDK target binary
-Group: TO_BE/FILLED_IN
-
-%description -n mmfw-sysconf-cleansdk-target
-Multimedia Framework system configuration package for clean SDK target binary
-
-%else
-
-%package -n mmfw-sysconf-simulator
-Summary: Multimedia Framework system configuration package for simulator
-Group: TO_BE/FILLED_IN
-
-%description -n mmfw-sysconf-simulator
-Multimedia Framework system configuration package for simulator
-%endif
-
-
-
-%prep
-%setup -q
-
-%build
-
-%install
-rm -rf %{buildroot}
-
-%ifarch %{arm}
- mkdir -p %{buildroot}/opt/etc/mmfw-sysconf
- cp -arf mmfw-sysconf-cleansdk-target/* %{buildroot}
-%else
- mkdir -p %{buildroot}/opt/etc/mmfw-sysconf
- cp -arf mmfw-sysconf-simulator/* %{buildroot}
-%endif
-
-%post
-
-%postun
-
-%ifarch %{arm}
-%files -n mmfw-sysconf-cleansdk-target
-%defattr(-,root,root,-)
-/etc/asound.conf
-/etc/pulse/*
-/usr/etc/*.ini
-/usr/share/pulseaudio/alsa-mixer/paths/*.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.common
-/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
-%else
-
-%files -n mmfw-sysconf-simulator
-%defattr(-,root,root,-)
-/etc/asound.conf
-/etc/pulse/*
-/usr/etc/*.ini
-/usr/share/pulseaudio/alsa-mixer/paths/*.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.common
-/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
-%endif
projects / platform / adaptation / intel_mfld / mmfw-sysconf-mfld-blackbay.git / commitdiff