From f46bdbe053f3bac1333ac1a1d9504e62daa28b1d Mon Sep 17 00:00:00 2001 From: Jaekyu Park Date: Fri, 27 May 2016 17:18:03 +0900 Subject: [PATCH] Tizen 2.4 SDK Rev6 Release --- Makefile.am | 4 +- include/dlog-internal.h | 444 ++++++++++++++++++++++++++++++++++++++++++++++++ include/dlog.h | 400 +------------------------------------------ packaging/dlog.spec | 1 + 4 files changed, 451 insertions(+), 398 deletions(-) create mode 100755 include/dlog-internal.h diff --git a/Makefile.am b/Makefile.am index b0d79d5..49a299f 100755 --- a/Makefile.am +++ b/Makefile.am @@ -5,13 +5,15 @@ AM_CFLAGS = -I$(srcdir)/include \ dlog_includedir = $(includedir)/dlog dlog_include_HEADERS = \ - include/dlog.h + include/dlog.h \ + include/dlog-internal.h lib_LTLIBRARIES = libdlog.la libdlog_la_SOURCES = \ src/libdlog/log.c \ include/dlog.h \ + include/dlog-internal.h \ src/libdlog/logconfig.c \ include/logconfig.h \ src/libdlog/loglimiter.c \ diff --git a/include/dlog-internal.h b/include/dlog-internal.h new file mode 100755 index 0000000..2b58b5b --- /dev/null +++ b/include/dlog-internal.h @@ -0,0 +1,444 @@ +/* + * DLOG + * Copyright (c) 2005-2008, The Android Open Source Project + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * + * Licensed under the Apache License, Version 2.0 (the License); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * @file dlog-internal.h + * @version 0.4 + * @brief This file is the header file of interface of dlog. + */ +#ifndef _DLOG_INTERNAL_H_ +#define _DLOG_INTERNAL_H_ + +#include +#include +#include + +#include "dlog.h" + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* + * This is the local tag used for the following simplified + * logging macros. You can change this preprocessor definition + * before using the other macros to change the tag. + */ +#ifndef LOG_TAG +#define LOG_TAG NULL +#endif + +#ifndef __MODULE__ +#define __MODULE__ (strrchr(__FILE__, '/') ? strrchr(__FILE__, '/') + 1 : __FILE__) +#endif + +#ifdef TIZEN_ENGINEER_MODE +#ifndef TIZEN_DEBUG_ENABLE +#define TIZEN_DEBUG_ENABLE +#endif +#endif + +/** + * @internal + * @brief log id + * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif + */ +typedef enum { + LOG_ID_MAIN = 0, + LOG_ID_RADIO, + LOG_ID_SYSTEM, + LOG_ID_APPS, + LOG_ID_MAX +} log_id_t; + +static inline int __dlog_no_print(const char *fmt __attribute__((unused)), ...) { return 0; } + +#define CONDITION(cond) (__builtin_expect((cond) != 0, 0)) +#define NOP(...) ({ do { __dlog_no_print(__VA_ARGS__); } while (0); }) + +// Macro inner work--------------------------------------------------------------- +#undef LOG_ +#ifdef TIZEN_DEBUG_ENABLE +#define LOG_(id, prio, tag, fmt, arg...) \ + ({ do { \ + __dlog_print(id, prio, tag, "%s: %s(%d) > " fmt, __MODULE__, __func__, __LINE__, ##arg); \ + } while (0); }) +#else +#define LOG_(id, prio, tag, fmt, arg...) \ + ({ do { \ + if ((int)prio != DLOG_DEBUG) { \ + __dlog_print(id, prio, tag, "%s: %s(%d) > " fmt, __MODULE__, __func__, __LINE__, ##arg); \ + } \ + } while (0); }) +#endif + +#undef SECURE_LOG_ +#ifdef TIZEN_DEBUG_ENABLE +#define SECURE_LOG_(id, prio, tag, fmt, arg...) \ + ({ do { \ + __dlog_print(id, prio, tag, "%s: %s(%d) > [SECURE_LOG] " fmt, __MODULE__, __func__, __LINE__, ##arg); \ + } while (0); }) +#else +#define SECURE_LOG_(id, prio, tag, fmt, arg...) NOP(fmt, ##arg) +#endif +// --------------------------------------------------------------------- +/** + * @internal + * @brief For Secure Log. + * @remarks Normally we strip Secure log from release builds. + * Please use this macros. + */ +/** + * @internal + * @brief For Application and etc. + * @details Simplified macro to send a main log message using the current LOG_TAG. + * Example: + * SECURE_LOGD("app debug %d", num); + * SECURE_LOGE("app error %d", num); + */ +#define SECURE_LOGD(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_DEBUG, LOG_TAG, format, ##arg) +#define SECURE_LOGI(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_INFO, LOG_TAG, format, ##arg) +#define SECURE_LOGW(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_WARN, LOG_TAG, format, ##arg) +#define SECURE_LOGE(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_ERROR, LOG_TAG, format, ##arg) +#define SECURE_LOGF(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @brief For Framework and system etc. + * @details Simplified macro to send a system log message using the current LOG_TAG. + * Example: + * SECURE_SLOGD("system debug %d", num); + * SECURE_SLOGE("system error %d", num); + */ +#define SECURE_SLOGD(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_DEBUG, LOG_TAG, format, ##arg) +#define SECURE_SLOGI(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_INFO, LOG_TAG, format, ##arg) +#define SECURE_SLOGW(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_WARN, LOG_TAG, format, ##arg) +#define SECURE_SLOGE(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_ERROR, LOG_TAG, format, ##arg) +#define SECURE_SLOGF(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @brief For Modem and radio etc. + * @details Simplified macro to send a radio log message using the current LOG_TAG. + * Example: + * SECURE_RLOGD("radio debug %d", num); + * SECURE_RLOGE("radio error %d", num); + */ +#define SECURE_RLOGD(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_DEBUG, LOG_TAG, format, ##arg) +#define SECURE_RLOGI(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_INFO, LOG_TAG, format, ##arg) +#define SECURE_RLOGW(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_WARN, LOG_TAG, format, ##arg) +#define SECURE_RLOGE(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_ERROR, LOG_TAG, format, ##arg) +#define SECURE_RLOGF(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @brief For Tizen OSP Application macro. + */ +#define SECURE_ALOGD(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_DEBUG, LOG_TAG, format, ##arg) +#define SECURE_ALOGI(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_INFO, LOG_TAG, format, ##arg) +#define SECURE_ALOGW(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_WARN, LOG_TAG, format, ##arg) +#define SECURE_ALOGE(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_ERROR, LOG_TAG, format, ##arg) +#define SECURE_ALOGF(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @details If you want use redefined macro. + * You can use this macro. + * This macro need priority and tag arguments. + */ +#define SECURE_LOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_MAIN, D##priority, tag, format, ##arg) +#define SECURE_SLOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, D##priority, tag, format, ##arg) +#define SECURE_RLOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_RADIO, D##priority, tag, format, ##arg) +#define SECURE_ALOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_APPS, D##priority, tag, format, ##arg) + +/** + * @internal + * @brief For Application and etc. + * @details Simplified macro to send a main log message using the current LOG_TAG. + * Example: + * LOGD("app debug %d", num); + * LOGE("app error %d", num); + */ +#ifdef TIZEN_DEBUG_ENABLE +#define LOGD(format, arg...) LOG_(LOG_ID_MAIN, DLOG_DEBUG, LOG_TAG, format, ##arg) +#else +#define LOGD(format, arg...) NOP(format, ##arg) +#endif +#define LOGI(format, arg...) LOG_(LOG_ID_MAIN, DLOG_INFO, LOG_TAG, format, ##arg) +#define LOGW(format, arg...) LOG_(LOG_ID_MAIN, DLOG_WARN, LOG_TAG, format, ##arg) +#define LOGE(format, arg...) LOG_(LOG_ID_MAIN, DLOG_ERROR, LOG_TAG, format, ##arg) +#define LOGF(format, arg...) LOG_(LOG_ID_MAIN, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @brief For Framework and system etc. + * @details Simplified macro to send a system log message using the current LOG_TAG. + * Example: + * SLOGD("system debug %d", num); + * SLOGE("system error %d", num); + */ +#ifdef TIZEN_DEBUG_ENABLE +#define SLOGD(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_DEBUG, LOG_TAG, format, ##arg) +#else +#define SLOGD(format, arg...) NOP(format, ##arg) +#endif +#define SLOGI(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_INFO, LOG_TAG, format, ##arg) +#define SLOGW(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_WARN, LOG_TAG, format, ##arg) +#define SLOGE(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_ERROR, LOG_TAG, format, ##arg) +#define SLOGF(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @brief For Modem and radio etc. + * @details Simplified macro to send a radio log message using the current LOG_TAG. + * Example: + * RLOGD("radio debug %d", num); + * RLOGE("radio error %d", num); + */ +#ifdef TIZEN_DEBUG_ENABLE +#define RLOGD(format, arg...) LOG_(LOG_ID_RADIO, DLOG_DEBUG, LOG_TAG, format, ##arg) +#else +#define RLOGD(format, arg...) NOP(format, ##arg) +#endif +#define RLOGI(format, arg...) LOG_(LOG_ID_RADIO, DLOG_INFO, LOG_TAG, format, ##arg) +#define RLOGW(format, arg...) LOG_(LOG_ID_RADIO, DLOG_WARN, LOG_TAG, format, ##arg) +#define RLOGE(format, arg...) LOG_(LOG_ID_RADIO, DLOG_ERROR, LOG_TAG, format, ##arg) +#define RLOGF(format, arg...) LOG_(LOG_ID_RADIO, DLOG_FATAL, LOG_TAG, format, ##arg) +/** + * @internal + * @brief For Tizen OSP Application macro. + */ +#ifdef TIZEN_DEBUG_ENABLE +#define ALOGD(format, arg...) LOG_(LOG_ID_APPS, DLOG_DEBUG, LOG_TAG, format, ##arg) +#else +#define ALOGD(format, arg...) NOP(format, ##arg) +#endif +#define ALOGI(format, arg...) LOG_(LOG_ID_APPS, DLOG_INFO, LOG_TAG, format, ##arg) +#define ALOGW(format, arg...) LOG_(LOG_ID_APPS, DLOG_WARN, LOG_TAG, format, ##arg) +#define ALOGE(format, arg...) LOG_(LOG_ID_APPS, DLOG_ERROR, LOG_TAG, format, ##arg) +#define ALOGF(format, arg...) LOG_(LOG_ID_APPS, DLOG_FATAL, LOG_TAG, format, ##arg) + +/** + * @internal + * @brief Basic log message macro + * @details This macro allows you to specify a priority and a tag + * if you want to use this macro directly, you must add this messages for unity of messages. + * (LOG(prio, tag, "%s: %s(%d) > " format, __MODULE__, __func__, __LINE__, ##arg)) + * + * Example: + * #define MYMACRO(prio, tag, format, arg...) \ + * LOG(prio, tag, format, ##arg) + * + * MYMACRO(LOG_DEBUG, MYTAG, "test mymacro %d", num); + * + */ +#ifndef LOG +#define LOG(priority, tag, format, arg...) LOG_(LOG_ID_MAIN, D##priority, tag, format, ##arg) +#endif +#define SLOG(priority, tag, format, arg...) LOG_(LOG_ID_SYSTEM, D##priority, tag, format, ##arg) +#define RLOG(priority, tag, format, arg...) LOG_(LOG_ID_RADIO, D##priority, tag, format, ##arg) +#define ALOG(priority, tag, format, arg...) LOG_(LOG_ID_APPS, D##priority, tag, format, ##arg) +/** + * @internal + */ +#define LOG_VA(priority, tag, fmt, args) \ + vprint_log(D##priority, tag, fmt, args) +#define ALOG_VA(priority, tag, fmt, args) \ + vprint_apps_log(D##priority, tag, fmt, args) +#define RLOG_VA(priority, tag, fmt, args) \ + vprint_radio_log(D##priority, tag, fmt, args) +#define SLOG_VA(priority, tag, fmt, args) \ + vprint_system_log(D##priority, tag, fmt, args) +#define print_apps_log(prio, tag, fmt...) \ + __dlog_print(LOG_ID_APPS, prio, tag, fmt) +#define vprint_apps_log(prio, tag, fmt...) \ + __dlog_vprint(LOG_ID_APPS, prio, tag, fmt) +#define print_log(prio, tag, fmt...) \ + __dlog_print(LOG_ID_MAIN, prio, tag, fmt) +#define vprint_log(prio, tag, fmt...) \ + __dlog_vprint(LOG_ID_MAIN, prio, tag, fmt) +#define print_radio_log(prio, tag, fmt...)\ + __dlog_print(LOG_ID_RADIO, prio, tag, fmt) +#define vprint_radio_log(prio, tag, fmt...) \ + __dlog_vprint(LOG_ID_RADIO, prio, tag, fmt) +#define print_system_log(prio, tag, fmt...)\ + __dlog_print(LOG_ID_SYSTEM, prio, tag, fmt) +#define vprint_system_log(prio, tag, fmt...) \ + __dlog_vprint(LOG_ID_SYSTEM, prio, tag, fmt) + +// --------------------------------------------------------------------- +// Don't use below macro no more!! It will be removed -- Verbose and Fatal priority macro will be removed -- +#define COMPATIBILITY_ON +#ifdef COMPATIBILITY_ON +/** + * @internal + * @breif Conditional Macro. + * @remarks Don't use this macro. It's just compatibility. + * It will be deprecated. + */ +#define LOGD_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + LOGD(format, ##arg); \ + } \ + } while (0); }) +#define LOGI_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + LOGI(format, ##arg); \ + } \ + } while (0); }) +#define LOGW_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + LOGW(format, ##arg); \ + } \ + } while (0); }) +#define LOGE_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + LOGE(format, ##arg); \ + } \ + } while (0); }) +#define LOGF_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + LOGF(format, ##arg); \ + } \ + } while (0); }) +#define SLOGD_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + SLOGD(format, ##arg); \ + } \ + } while (0); }) +#define SLOGI_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + SLOGI(format, ##arg); \ + } \ + } while (0); }) +#define SLOGW_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + SLOGW(format, ##arg); \ + } \ + } while (0); }) +#define SLOGE_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + SLOGE(format, ##arg); \ + } \ + } while (0); }) +#define SLOGF_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + SLOGF(format, ##arg); \ + } \ + } while (0); }) +#define RLOGD_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + RLOGD(format, ##arg); \ + } \ + } while (0); }) +#define RLOGI_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + RLOGI(format, ##arg); \ + } \ + } while (0); }) +#define RLOGW_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + RLOGW(format, ##arg); \ + } \ + } while (0); }) +#define RLOGE_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + RLOGE(format, ##arg); \ + } \ + } while (0); }) +#define RLOGF_IF(cond, format, arg...) \ + ({ do { \ + if (CONDITION(cond)) { \ + RLOGF(format, ##arg); \ + } \ + } while (0); }) +#define LOG_ON() ({ do { } while (0); }) +#define LOGV(format, arg...) NOP(format, ##arg) +#define SLOGV(format, arg...) NOP(format, ##arg) +#define RLOGV(format, arg...) NOP(format, ##arg) +#define ALOGV(format, arg...) NOP(format, ##arg) +#define LOGV_IF(cond, format, arg...) NOP(format, ##arg) +#define SLOGV_IF(cond, format, arg...) NOP(format, ##arg) +#define RLOGV_IF(cond, format, arg...) NOP(format, ##arg) +#define SECLOG(...) ({ do { } while (0); }) +#endif +// --------------------------------------------------------------------- + +/* + * The stuff in the rest of this file should not be used directly. + */ +/** + * @internal + * @brief Send log. + * @details Use LOG(), SLOG(), RLOG() family + * not to use __dlog_print() directly + * @remarks Must not use this API directly. use macros instead. + * @param[in] log_id log device id + * @param[in] prio priority + * @param[in] tag tag + * @param[in] fmt format string + * @return Operation result + * @retval 0>= Success + * @retval -1 Error + * @pre none + * @post none + * @see __dlog_print + * @code + #define LOG_TAG USR_TAG + #include + __dlog_print(LOG_ID_MAIN, DLOG_INFO, USR_TAG, "you must not use this API directly"); + * @endcode + */ +int __dlog_print(log_id_t log_id, int prio, const char *tag, const char *fmt, ...); + +/** + * @internal + * @brief Send log with va_list. + * @details Use LOG_VA(), SLOG_VA(), RLOG_VA() family + not to use __dlog_vprint() directly + * @remarks Must not use this API directly. use macros instead. + * @param[in] log_id log device id + * @param[in] prio priority + * @param[in] tag tag + * @param[in] fmt format string + * @param[in] ap va_list + * @return Operation result + * @retval 0>= Success + * @retval -1 Error + * @pre none + * @post none + * @see __dlog_vprint + * @code + #define LOG_TAG USR_TAG + #include + __dlog_vprint(LOG_ID_MAIN, DLOG_INFO, USR_TAG, "you must not use this API directly", ap); + * @endcode + */ +int __dlog_vprint(log_id_t log_id, int prio, const char *tag, const char *fmt, va_list ap); +#ifdef __cplusplus +} +#endif /* __cplusplus */ +#endif /* _DLOG_INTERNAL_H_*/ diff --git a/include/dlog.h b/include/dlog.h index 1a61715..e809b70 100755 --- a/include/dlog.h +++ b/include/dlog.h @@ -28,6 +28,8 @@ #include #include +#include "dlog-internal.h" + #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ @@ -41,16 +43,6 @@ extern "C" { #define LOG_TAG NULL #endif -#ifndef __MODULE__ -#define __MODULE__ (strrchr(__FILE__, '/') ? strrchr(__FILE__, '/') + 1 : __FILE__) -#endif - -#ifdef TIZEN_ENGINEER_MODE -#ifndef TIZEN_DEBUG_ENABLE -#define TIZEN_DEBUG_ENABLE -#endif -#endif - /** * @addtogroup CAPI_SYSTEM_DLOG * @{ @@ -63,7 +55,7 @@ extern "C" { typedef enum { DLOG_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */ DLOG_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */ - DLOG_ERROR_NOT_PERMITTED = TIZEN_ERROR_NOT_PERMITTED, /**< Operation not permitted */ + DLOG_ERROR_NOT_PERMITTED = TIZEN_ERROR_NOT_PERMITTED /**< Operation not permitted */ } dlog_error_e; /** * @} @@ -95,340 +87,6 @@ typedef enum { */ /** - * @internal - * @brief log id - * @since_tizen @if MOBILE 2.3 @elseif WEARABLE 2.3.1 @endif - */ -typedef enum { - LOG_ID_MAIN = 0, - LOG_ID_RADIO, - LOG_ID_SYSTEM, - LOG_ID_APPS, - LOG_ID_MAX -} log_id_t; - -static inline int __dlog_no_print(const char *fmt __attribute__((unused)), ...) { return 0; } - -#define CONDITION(cond) (__builtin_expect((cond) != 0, 0)) -#define NOP(...) ({ do { __dlog_no_print(__VA_ARGS__); } while (0); }) - -// Macro inner work--------------------------------------------------------------- -#undef LOG_ -#ifdef TIZEN_DEBUG_ENABLE -#define LOG_(id, prio, tag, fmt, arg...) \ - ({ do { \ - __dlog_print(id, prio, tag, "%s: %s(%d) > " fmt, __MODULE__, __func__, __LINE__, ##arg); \ - } while (0); }) -#else -#define LOG_(id, prio, tag, fmt, arg...) \ - ({ do { \ - if ((int)prio != DLOG_DEBUG) { \ - __dlog_print(id, prio, tag, "%s: %s(%d) > " fmt, __MODULE__, __func__, __LINE__, ##arg); \ - } \ - } while (0); }) -#endif - -#undef SECURE_LOG_ -#ifdef TIZEN_DEBUG_ENABLE -#define SECURE_LOG_(id, prio, tag, fmt, arg...) \ - ({ do { \ - __dlog_print(id, prio, tag, "%s: %s(%d) > [SECURE_LOG] " fmt, __MODULE__, __func__, __LINE__, ##arg); \ - } while (0); }) -#else -#define SECURE_LOG_(id, prio, tag, fmt, arg...) NOP(fmt, ##arg) -#endif -// --------------------------------------------------------------------- -/** - * @internal - * @brief For Secure Log. - * @remarks Normally we strip Secure log from release builds. - * Please use this macros. - */ -/** - * @internal - * @brief For Application and etc. - * @details Simplified macro to send a main log message using the current LOG_TAG. - * Example: - * SECURE_LOGD("app debug %d", num); - * SECURE_LOGE("app error %d", num); - */ -#define SECURE_LOGD(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_DEBUG, LOG_TAG, format, ##arg) -#define SECURE_LOGI(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_INFO, LOG_TAG, format, ##arg) -#define SECURE_LOGW(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_WARN, LOG_TAG, format, ##arg) -#define SECURE_LOGE(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_ERROR, LOG_TAG, format, ##arg) -#define SECURE_LOGF(format, arg...) SECURE_LOG_(LOG_ID_MAIN, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @brief For Framework and system etc. - * @details Simplified macro to send a system log message using the current LOG_TAG. - * Example: - * SECURE_SLOGD("system debug %d", num); - * SECURE_SLOGE("system error %d", num); - */ -#define SECURE_SLOGD(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_DEBUG, LOG_TAG, format, ##arg) -#define SECURE_SLOGI(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_INFO, LOG_TAG, format, ##arg) -#define SECURE_SLOGW(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_WARN, LOG_TAG, format, ##arg) -#define SECURE_SLOGE(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_ERROR, LOG_TAG, format, ##arg) -#define SECURE_SLOGF(format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @brief For Modem and radio etc. - * @details Simplified macro to send a radio log message using the current LOG_TAG. - * Example: - * SECURE_RLOGD("radio debug %d", num); - * SECURE_RLOGE("radio error %d", num); - */ -#define SECURE_RLOGD(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_DEBUG, LOG_TAG, format, ##arg) -#define SECURE_RLOGI(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_INFO, LOG_TAG, format, ##arg) -#define SECURE_RLOGW(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_WARN, LOG_TAG, format, ##arg) -#define SECURE_RLOGE(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_ERROR, LOG_TAG, format, ##arg) -#define SECURE_RLOGF(format, arg...) SECURE_LOG_(LOG_ID_RADIO, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @brief For Tizen OSP Application macro. - */ -#define SECURE_ALOGD(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_DEBUG, LOG_TAG, format, ##arg) -#define SECURE_ALOGI(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_INFO, LOG_TAG, format, ##arg) -#define SECURE_ALOGW(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_WARN, LOG_TAG, format, ##arg) -#define SECURE_ALOGE(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_ERROR, LOG_TAG, format, ##arg) -#define SECURE_ALOGF(format, arg...) SECURE_LOG_(LOG_ID_APPS, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @details If you want use redefined macro. - * You can use this macro. - * This macro need priority and tag arguments. - */ -#define SECURE_LOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_MAIN, D##priority, tag, format, ##arg) -#define SECURE_SLOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_SYSTEM, D##priority, tag, format, ##arg) -#define SECURE_RLOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_RADIO, D##priority, tag, format, ##arg) -#define SECURE_ALOG(priority, tag, format, arg...) SECURE_LOG_(LOG_ID_APPS, D##priority, tag, format, ##arg) - -/** - * @internal - * @brief For Application and etc. - * @details Simplified macro to send a main log message using the current LOG_TAG. - * Example: - * LOGD("app debug %d", num); - * LOGE("app error %d", num); - */ -#ifdef TIZEN_DEBUG_ENABLE -#define LOGD(format, arg...) LOG_(LOG_ID_MAIN, DLOG_DEBUG, LOG_TAG, format, ##arg) -#else -#define LOGD(format, arg...) NOP(format, ##arg) -#endif -#define LOGI(format, arg...) LOG_(LOG_ID_MAIN, DLOG_INFO, LOG_TAG, format, ##arg) -#define LOGW(format, arg...) LOG_(LOG_ID_MAIN, DLOG_WARN, LOG_TAG, format, ##arg) -#define LOGE(format, arg...) LOG_(LOG_ID_MAIN, DLOG_ERROR, LOG_TAG, format, ##arg) -#define LOGF(format, arg...) LOG_(LOG_ID_MAIN, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @brief For Framework and system etc. - * @details Simplified macro to send a system log message using the current LOG_TAG. - * Example: - * SLOGD("system debug %d", num); - * SLOGE("system error %d", num); - */ -#ifdef TIZEN_DEBUG_ENABLE -#define SLOGD(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_DEBUG, LOG_TAG, format, ##arg) -#else -#define SLOGD(format, arg...) NOP(format, ##arg) -#endif -#define SLOGI(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_INFO, LOG_TAG, format, ##arg) -#define SLOGW(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_WARN, LOG_TAG, format, ##arg) -#define SLOGE(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_ERROR, LOG_TAG, format, ##arg) -#define SLOGF(format, arg...) LOG_(LOG_ID_SYSTEM, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @brief For Modem and radio etc. - * @details Simplified macro to send a radio log message using the current LOG_TAG. - * Example: - * RLOGD("radio debug %d", num); - * RLOGE("radio error %d", num); - */ -#ifdef TIZEN_DEBUG_ENABLE -#define RLOGD(format, arg...) LOG_(LOG_ID_RADIO, DLOG_DEBUG, LOG_TAG, format, ##arg) -#else -#define RLOGD(format, arg...) NOP(format, ##arg) -#endif -#define RLOGI(format, arg...) LOG_(LOG_ID_RADIO, DLOG_INFO, LOG_TAG, format, ##arg) -#define RLOGW(format, arg...) LOG_(LOG_ID_RADIO, DLOG_WARN, LOG_TAG, format, ##arg) -#define RLOGE(format, arg...) LOG_(LOG_ID_RADIO, DLOG_ERROR, LOG_TAG, format, ##arg) -#define RLOGF(format, arg...) LOG_(LOG_ID_RADIO, DLOG_FATAL, LOG_TAG, format, ##arg) -/** - * @internal - * @brief For Tizen OSP Application macro. - */ -#ifdef TIZEN_DEBUG_ENABLE -#define ALOGD(format, arg...) LOG_(LOG_ID_APPS, DLOG_DEBUG, LOG_TAG, format, ##arg) -#else -#define ALOGD(format, arg...) NOP(format, ##arg) -#endif -#define ALOGI(format, arg...) LOG_(LOG_ID_APPS, DLOG_INFO, LOG_TAG, format, ##arg) -#define ALOGW(format, arg...) LOG_(LOG_ID_APPS, DLOG_WARN, LOG_TAG, format, ##arg) -#define ALOGE(format, arg...) LOG_(LOG_ID_APPS, DLOG_ERROR, LOG_TAG, format, ##arg) -#define ALOGF(format, arg...) LOG_(LOG_ID_APPS, DLOG_FATAL, LOG_TAG, format, ##arg) - -/** - * @internal - * @brief Basic log message macro - * @details This macro allows you to specify a priority and a tag - * if you want to use this macro directly, you must add this messages for unity of messages. - * (LOG(prio, tag, "%s: %s(%d) > " format, __MODULE__, __func__, __LINE__, ##arg)) - * - * Example: - * #define MYMACRO(prio, tag, format, arg...) \ - * LOG(prio, tag, format, ##arg) - * - * MYMACRO(LOG_DEBUG, MYTAG, "test mymacro %d", num); - * - */ -#ifndef LOG -#define LOG(priority, tag, format, arg...) LOG_(LOG_ID_MAIN, D##priority, tag, format, ##arg) -#endif -#define SLOG(priority, tag, format, arg...) LOG_(LOG_ID_SYSTEM, D##priority, tag, format, ##arg) -#define RLOG(priority, tag, format, arg...) LOG_(LOG_ID_RADIO, D##priority, tag, format, ##arg) -#define ALOG(priority, tag, format, arg...) LOG_(LOG_ID_APPS, D##priority, tag, format, ##arg) -/** - * @internal - */ -#define LOG_VA(priority, tag, fmt, args) \ - vprint_log(D##priority, tag, fmt, args) -#define ALOG_VA(priority, tag, fmt, args) \ - vprint_apps_log(D##priority, tag, fmt, args) -#define RLOG_VA(priority, tag, fmt, args) \ - vprint_radio_log(D##priority, tag, fmt, args) -#define SLOG_VA(priority, tag, fmt, args) \ - vprint_system_log(D##priority, tag, fmt, args) -#define print_apps_log(prio, tag, fmt...) \ - __dlog_print(LOG_ID_APPS, prio, tag, fmt) -#define vprint_apps_log(prio, tag, fmt...) \ - __dlog_vprint(LOG_ID_APPS, prio, tag, fmt) -#define print_log(prio, tag, fmt...) \ - __dlog_print(LOG_ID_MAIN, prio, tag, fmt) -#define vprint_log(prio, tag, fmt...) \ - __dlog_vprint(LOG_ID_MAIN, prio, tag, fmt) -#define print_radio_log(prio, tag, fmt...)\ - __dlog_print(LOG_ID_RADIO, prio, tag, fmt) -#define vprint_radio_log(prio, tag, fmt...) \ - __dlog_vprint(LOG_ID_RADIO, prio, tag, fmt) -#define print_system_log(prio, tag, fmt...)\ - __dlog_print(LOG_ID_SYSTEM, prio, tag, fmt) -#define vprint_system_log(prio, tag, fmt...) \ - __dlog_vprint(LOG_ID_SYSTEM, prio, tag, fmt) - -// --------------------------------------------------------------------- -// Don't use below macro no more!! It will be removed -- Verbose and Fatal priority macro will be removed -- -#define COMPATIBILITY_ON -#ifdef COMPATIBILITY_ON -/** - * @internal - * @breif Conditional Macro. - * @remarks Don't use this macro. It's just compatibility. - * It will be deprecated. - */ -#define LOGD_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - LOGD(format, ##arg); \ - } \ - } while (0); }) -#define LOGI_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - LOGI(format, ##arg); \ - } \ - } while (0); }) -#define LOGW_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - LOGW(format, ##arg); \ - } \ - } while (0); }) -#define LOGE_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - LOGE(format, ##arg); \ - } \ - } while (0); }) -#define LOGF_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - LOGF(format, ##arg); \ - } \ - } while (0); }) -#define SLOGD_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - SLOGD(format, ##arg); \ - } \ - } while (0); }) -#define SLOGI_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - SLOGI(format, ##arg); \ - } \ - } while (0); }) -#define SLOGW_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - SLOGW(format, ##arg); \ - } \ - } while (0); }) -#define SLOGE_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - SLOGE(format, ##arg); \ - } \ - } while (0); }) -#define SLOGF_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - SLOGF(format, ##arg); \ - } \ - } while (0); }) -#define RLOGD_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - RLOGD(format, ##arg); \ - } \ - } while (0); }) -#define RLOGI_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - RLOGI(format, ##arg); \ - } \ - } while (0); }) -#define RLOGW_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - RLOGW(format, ##arg); \ - } \ - } while (0); }) -#define RLOGE_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - RLOGE(format, ##arg); \ - } \ - } while (0); }) -#define RLOGF_IF(cond, format, arg...) \ - ({ do { \ - if (CONDITION(cond)) { \ - RLOGF(format, ##arg); \ - } \ - } while (0); }) -#define LOG_ON() ({ do { } while (0); }) -#define LOGV(format, arg...) NOP(format, ##arg) -#define SLOGV(format, arg...) NOP(format, ##arg) -#define RLOGV(format, arg...) NOP(format, ##arg) -#define ALOGV(format, arg...) NOP(format, ##arg) -#define LOGV_IF(cond, format, arg...) NOP(format, ##arg) -#define SLOGV_IF(cond, format, arg...) NOP(format, ##arg) -#define RLOGV_IF(cond, format, arg...) NOP(format, ##arg) -#define SECLOG(...) ({ do { } while (0); }) -#endif -// --------------------------------------------------------------------- - -/** * @addtogroup CAPI_SYSTEM_DLOG * @{ */ @@ -500,58 +158,6 @@ int dlog_vprint(log_priority prio, const char *tag, const char *fmt, va_list ap) * @} */ - -/* - * The stuff in the rest of this file should not be used directly. - */ -/** - * @internal - * @brief Send log. - * @details Use LOG(), SLOG(), RLOG() family - * not to use __dlog_print() directly - * @remarks Must not use this API directly. use macros instead. - * @param[in] log_id log device id - * @param[in] prio priority - * @param[in] tag tag - * @param[in] fmt format string - * @return Operation result - * @retval 0>= Success - * @retval -1 Error - * @pre none - * @post none - * @see __dlog_print - * @code - #define LOG_TAG USR_TAG - #include - __dlog_print(LOG_ID_MAIN, DLOG_INFO, USR_TAG, "you must not use this API directly"); - * @endcode - */ -int __dlog_print(log_id_t log_id, int prio, const char *tag, const char *fmt, ...); - -/** - * @internal - * @brief Send log with va_list. - * @details Use LOG_VA(), SLOG_VA(), RLOG_VA() family - not to use __dlog_vprint() directly - * @remarks Must not use this API directly. use macros instead. - * @param[in] log_id log device id - * @param[in] prio priority - * @param[in] tag tag - * @param[in] fmt format string - * @param[in] ap va_list - * @return Operation result - * @retval 0>= Success - * @retval -1 Error - * @pre none - * @post none - * @see __dlog_vprint - * @code - #define LOG_TAG USR_TAG - #include - __dlog_vprint(LOG_ID_MAIN, DLOG_INFO, USR_TAG, "you must not use this API directly", ap); - * @endcode - */ -int __dlog_vprint(log_id_t log_id, int prio, const char *tag, const char *fmt, va_list ap); #ifdef __cplusplus } #endif /* __cplusplus */ diff --git a/packaging/dlog.spec b/packaging/dlog.spec index 5eda452..0e78002 100755 --- a/packaging/dlog.spec +++ b/packaging/dlog.spec @@ -134,6 +134,7 @@ systemctl daemon-reload %files -n libdlog-devel %{_includedir}/dlog/dlog.h +%{_includedir}/dlog/dlog-internal.h %{_libdir}/pkgconfig/dlog.pc %{_libdir}/libdlog.so -- 2.7.4