kernel/u-boot.git
2009-01-28 Stefan RoeseUSB: Add high-speed (480Mb/s) to all USB related outputs
2009-01-28 Stefan RoeseUSB: Add dcache support to the EHCI driver
2009-01-28 Stefan RoeseUSB: Add EHCI support for VCT EHCI controller
2009-01-28 Stefan RoeseUSB: Add config option to call ehci_hcd_init() again...
2009-01-28 Stefan RoeseUSB: Fix speed detection on EHCI cntr with root hub...
2009-01-28 Thomas Abrahamusb : musb : Enabling USB MSC support for DM6446 (TI...
2009-01-28 Thomas Abrahamusb : musb : Enabling DM6446 (TI DaVinci) USB module...
2009-01-28 Thomas Abrahamusb : musb : Adding DM6446 (TI DaVinci) platform specif...
2009-01-28 Thomas Abrahamusb : musb : Adding USB VBUS enable functionality for...
2009-01-28 Thomas Abrahamusb : musb : Adding host controller driver for Mentor...
2009-01-28 Mike Frysingerusb.h: use standard __LITTLE_ENDIAN from Linux headers
2009-01-28 Michael TrimarchiUSB ehci ixp4xx support
2009-01-28 Michael TrimarchiUSB ehci remove infinite loop and use handshake function
2009-01-28 Michael TrimarchiAdd initial support for USB ehci pci
2009-01-28 Bryan Wuusb_storage: do not reset SanDisk Corporation U3 Cruzer...
2009-01-28 Thomas Abrahamusb : usb_kbd : Populating 'priv' member of USB keyboar...
2009-01-28 Michael TrimarchiUSB change speed
2009-01-28 Remy BöhmerEHCI fix code and ixp4xx test.
2009-01-28 michael[PATCH] This patch add varius fix to the ehci.
2009-01-28 michael[PATCH] Fix EHCI usb. I start to test on a
2009-01-28 Michael TrimarchiUSB ehci freescale support
2009-01-28 Michael TrimarchiUSB ehci core support
2009-01-28 Michael TrimarchiPrepare USB layer for ehci
2009-01-28 Michael TrimarchiUSB storage cleanup patch
2009-01-28 Kim Phillipsmpc83xx: fix undefined reference to `flush_cache' error...
2009-01-28 Wolfgang Denkmpc8536ds.c: include sata.h to for needed function...
2009-01-28 Peter TyserCommand usage cleanup
2009-01-28 Peter Tyseramcc: Clean up command usage output
2009-01-28 Peter TyserStandardize command usage messages with cmd_usage()
2009-01-28 Peter Tyserpcs440ep: Clean up led command definition
2009-01-28 Peter TyserClean up diufb command definitions
2009-01-27 Wolfgang DenkUpdate CHANGELOG, tiny coding style cleanup.
2009-01-27 Mike FrysingerSATA: do not auto-initialize during boot
2009-01-27 Richard Retanubunpart_efi: Fix partition size calculation due to inclusi...
2009-01-27 Tomasz Figajffs2: Fix zero sector_size when not using CONFIG_JFFS2...
2009-01-27 Mike Frysingersaveenv: standardize enablement
2009-01-27 Andrew Dyersoft_i2c.c add option for repeated start in i2c_read()
2009-01-27 Wolfgang Denk{delta,zylonite}/lowlevel_init.S: fix typo
2009-01-27 Stefan Althoeferdrivers/net/e1000.c: missing terminator for supported...
2009-01-27 Wolfgang Denkfat.c: fix warning: array subscript is above array...
2009-01-27 Matthias FuchsFix gunzip in case of insufficient output buffer
2009-01-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mips
2009-01-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-cfi...
2009-01-27 Stefan RoeseMIPS: Add VCT board series support (Part 3/3)
2009-01-27 Stefan RoeseMIPS: Add VCT board series support (Part 2/3)
2009-01-27 Stefan RoeseMIPS: Add VCT board series support (Part 1/3)
2009-01-27 Stefan RoeseMIPS: Add flush_dcache_range() and invalidate_dcache_ra...
2009-01-26 Richard RetanubunCFI: Add geometry reversal for STMicro M29W320ET
2009-01-26 Jens GehrleinCFI: increase performance of function find_sector()
2009-01-26 Jens GehrleinCFI: avoid redundant function call in single word progr...
2009-01-26 Stefan Roeseppc4xx: Remove compilation warning in gdppc440etc.c
2009-01-26 Matthias Fuchsppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59...
2009-01-26 Dirk Eibachppc4xx: Add GDsys PowerPC 440 ETX board support.
2009-01-26 Dirk Eibachppc4xx: Improve DDR autodetect
2009-01-24 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2009-01-24 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
2009-01-24 Mike Frysingereasylogo: add optional gzip support
2009-01-24 Bryan Wufat: fix unaligned errors
2009-01-24 Brad Bozarthspi flash: fix crash due to spi flash miscommunication
2009-01-24 Yuri TikhonovFPU POST: fix warnings when building with 2.18 binutils
2009-01-24 Peter TyserAdd support for Maxim's DS4510 I2C device
2009-01-24 Dirk Eibachcommon: Iteration limit for memory test.
2009-01-24 Stefan Roeseserial: Rename driver vcth to vct to support other...
2009-01-24 Shinya Kuribayashinios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
2009-01-24 Peter Korsgaardcommon/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
2009-01-24 Niklaus GigerAdded legacy flash ST Micro M29W040B
2009-01-24 Graeme RussFixed off-by-one errors in lib_m68k/interrupts.c
2009-01-24 Graeme RussRemoved all references to CONFIG_SYS_RESET_GENERIC
2009-01-24 Graeme RussRemove #ifdef CONFIG_SC520 in source code
2009-01-24 Graeme RussAdded MMCR reset functionality
2009-01-24 Graeme RussMoved generic (triple fault) reset code
2009-01-24 Graeme RussMoved definition of set_vector() to new header file
2009-01-24 Graeme RussMoved sc520 specific code into new cpu/i386/sc520 folder
2009-01-24 Graeme RussRenamed cpu/i386/reset.S to resetvec.S
2009-01-24 Wolfgang DenkMakefile: keep lists sorted.
2009-01-24 Graeme RussAdded initial eNET board support
2009-01-23 Kim PhillipsMerge branch 'next'
2009-01-23 Gary JennejohnPOWERPC 82xx: add the SCC as an HDLC controller
2009-01-23 Heiko Schocherpowerpc, keymile boards: extract identical config options
2009-01-23 Heiko Schocherpowerpc: keymile: Add a check for the PIGGY debug board
2009-01-23 Heiko Schocherpowerpc: 83xx: add support for the kmeter1 board
2009-01-23 Sergei PoselenovAdd a do_div() wrapper macro, lldiv().
2009-01-23 Kumar Gala85xx: Add a 36-bit physical configuration for MPC8572DS
2009-01-23 Kumar Gala85xx: Handle eLBC difference w/36-bit physical
2009-01-23 Kumar Gala85xx: Use BR_ADDR macro for NAND chipselects
2009-01-23 Haiying WangAdd secondary CPUs processor frequency for e500 core
2009-01-23 Dave Liu85xx: enable the auto self refresh for wake up ARP
2009-01-23 Dave Liufsl-ddr: use the 1T timing as default configuration
2009-01-23 Dave Liufsl-ddr: make the self refresh idle threshold configurable
2009-01-23 Dave Liufsl-ddr: clean up the ddr code for DDR3 controller
2009-01-23 Dave Liufsl-ddr: update the bit mask for DDR3 controller
2009-01-23 Kumar Gala85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
2009-01-23 Kumar Gala85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
2009-01-23 Kumar Gala85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical...
2009-01-23 Kumar Gala85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for...
2009-01-23 Kumar Gala85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_B...
2009-01-23 Kumar Gala85xx: separate FLASH BASE virtual from physical address
2009-01-23 Kumar Gala85xx: separate PIXIS virtual from physical address
2009-01-23 Haiying WangAdd README file for MPC8572DS board
2009-01-23 Mike FrysingerBlackfin: use common strmhz() in system output
next