platform/kernel/u-boot.git
2012-10-16 Tetsuyuki Kobayashii2c: sh_i2c: enable i2c_probe
2012-10-16 Tetsuyuki Kobayashii2c: sh_i2c.c: support I2C2, I2C3 and I2C4
2012-10-16 Tetsuyuki Kobayashii2c: sh_i2c.c: adjust for SH73A0
2012-10-16 Tetsuyuki Kobayashii2c: sh_i2c.c: correct BUSY bit define in ICSR
2012-10-16 Tetsuyuki Kobayashii2c: sh_i2c.c: support iccl and icch extension
2012-10-15 Tom RiniMerge branch 'agust@denx.de-next' of git://git.denx...
2012-10-15 Joe Hershbergertools/env: Fix build failure from missing header include
2012-10-15 Marek Vasutkerneldoc: Add myself to the git-mailrc for kerneldoc
2012-10-15 Marek Vasutkerneldoc: Implement "Example" section handling
2012-10-15 Marek Vasutkerneldoc: Add nicer CSS stylesheet for HTML docs
2012-10-15 Marek Vasutkerneldoc: Implant DocBook from Linux kernel
2012-10-15 Fabio Estevamconfigs: mx6qsabre_common.h: Use default clock definitions
2012-10-15 Fabio Estevammx6qsabreauto: Add Ethernet support
2012-10-15 Benoît Thébaudeaumx25: Clean up lowlevel_init
2012-10-15 Benoît Thébaudeaumx31: Fix PDR0_CSI_PODF
2012-10-15 Benoît Thébaudeaumx35: Define MAX and AIPS registers
2012-10-15 Benoît Thébaudeaumx31: Add more CCM access macros
2012-10-15 Benoît Thébaudeaumx5: Optimize lowlevel_init code size
2012-10-15 Otavio Salvadormx6qsabreauto: Use ttymxc3 as console
2012-10-15 Benoît Thébaudeaumx25: Fix eSDHC support
2012-10-15 Benoît Thébaudeaumx25: Define cpu_eth_init() only if needed
2012-10-15 Benoît Thébaudeaumx25: Clean up clocks API
2012-10-15 Benoît Thébaudeaumx25 clocks: Fix MXC_FEC_CLK
2012-10-15 Benoît Thébaudeaumx25: Define more standard clocks
2012-10-15 Benoît Thébaudeaumx25: Clean up clock calculations
2012-10-15 Benoît Thébaudeaumx25: Fix decode_pll
2012-10-15 Benoît Thébaudeaumx5/6 clocks: Fix SDHC clocks
2012-10-15 Benoît Thébaudeaumx51: Fix I2C clock ID check
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix MXC_FEC_CLK
2012-10-15 Benoît Thébaudeaumx5 clocks: Simplify imx_get_cspiclk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_uart_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_ipg_per_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_periph_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_lp_apm()
2012-10-15 Benoît Thébaudeaumx5 clocks: Add and use CCSR definitions
2012-10-15 Benoît Thébaudeaumx51: Fix USB PHY clocks
2012-10-15 Benoît Thébaudeaumx5: Fix clock gate values
2012-10-15 Benoît Thébaudeaumx5: Use explicit clock gate names
2012-10-15 Benoît Thébaudeaumx5 clocks: Cleanup
2012-10-15 Benoît Thébaudeaumx5/6: Define default SoC input clock frequencies
2012-10-15 Matthias Weisserimx: Use MXC_I2C_CLK in imx i2c driver
2012-10-15 Eric Benardmx25: add CPU revision 1.2
2012-10-15 Fabio Estevammx6q: Add basic support for mx6qsabreauto
2012-10-15 Fabio Estevamconfigs: mx6: Add a common config file
2012-10-15 Eric Nelsoni.MX6: get rid of redundant struct src_regs (dupe of...
2012-10-15 Eric Nelsoni.MX6: define struct iomuxc and IOMUX_GPR2 register...
2012-10-15 Eric Nelsoni.MX6: Add ANATOP_PFD_480 bitfield constants
2012-10-15 Eric Nelsoni.MX6: define IOMUX_GPR3 register bitfields
2012-10-15 Eric Nelsoni.MX6: define bitfields for CHSCCDR register
2012-10-15 Eric Nelsoni.MX6: change register name for CCM_CHSCCDR to match...
2012-10-15 Eric Nelsoni.MX6: provide functional names for CCM_CCGR0-CCGR6...
2012-10-15 Fabio Estevammx6qsabresd: Add 8-bit USDHC support
2012-10-15 Fabio Estevammx6qsabresd: Add Ethernet support
2012-10-15 Fabio Estevammx6: Add basic support for mx6qsabresd board.
2012-10-15 Fabio Estevammx6q: Factor out common DDR3 init code
2012-10-15 Lukasz Dalekpxa: Add code to examine cpu model and revision
2012-10-15 Lucas Stachtegra: nand: add board pinmux
2012-10-15 Lucas Stachtegra: clean up board include hell
2012-10-15 Lucas Stachtegra: add funcmux entry for NAND attached to KBC
2012-10-15 Lucas Stachtegra20: rework UART GPIO handling
2012-10-15 Lucas Stachtegra20: add clock_set_pllout function
2012-10-15 Lucas Stachtegra20: complete periph_id enum
2012-10-15 Stephen Warrentegra: enable CONFIG_CMD_PART
2012-10-15 Tom WarrenTegra20: Move some include files to arch-tegra for...
2012-10-15 Tom WarrenTegra20: Move some code files to common directories...
2012-10-15 Thierry Redingtegra: Rename Medcom to Medcom-Wide
2012-10-15 Thierry Redingtegra: Update Avionic Design vendor prefix
2012-10-15 Joe Hershbergertools: Add a README note about fw_printenv lock file
2012-10-15 Joe Hershbergerenv: Check for NULL pointer in envmatch()
2012-10-15 Joe Hershbergertools/env: Serialize calls to fw_*env
2012-10-15 Joe Hershbergertools/env: Don't call env_init() in fw_getenv()
2012-10-15 Joe Hershbergertools/env: Remove unneeded complexity
2012-10-15 Joe Hershbergertools/env: Use a board-specific default env
2012-10-15 Daniel Schwierzeckcommon: cmd_bdinfo: fix type of value in print_lnum
2012-10-15 Simon Glassinput: Add debugging for key matrix key codes
2012-10-15 Simon Glassinput: Allow key ghosting filter to be disabled
2012-10-15 Simon Glassinput: Separate out keyboard repeat/delay from init
2012-10-15 Simon Glassinput: Correct key_matrix fdt decoding
2012-10-15 Fabio Estevamtools: Add cleanpatch
2012-10-15 Simon Glasspatman: Handle checkpatch.pl not providing file/line...
2012-10-15 Simon Glasspatman: Support Series-name tag to name a series
2012-10-15 Kim PhillipsMAKEALL: add a -C/--check option to enable build checking
2012-10-15 Kim Phillipsadd check infrastructure, default sparse
2012-10-15 Pavel Herrmannsata.h: Make all sata/ata drivers include <sata.h>
2012-10-15 Tom Riniide.h: Make ide_(read|write) match block_dev_desc_t...
2012-10-15 Tom Rinisil_sata: Make sata_write() comply with <part.h>
2012-10-15 Tom Rinisata_dwc: Make sata_write() use const void, per <part.h>
2012-10-15 Tom Rinipata_bfin: Make sata_{read,write}() comply with <part.h>
2012-10-15 Tom Rinifsl_sata: Make sata_{read,write}() comply with <part.h>
2012-10-15 Tom Rinidwc_ahsata: Make sata_write() comply with <part.h>
2012-10-15 Tom Riniata_piix: sata_write must take a const void argument.
2012-10-15 Tom Riniata_piix: Fix checkpatch issues
2012-10-15 Lukasz Dalekusb.h: Add udc_disconnect prototype to usb.h
2012-10-15 Lukasz Dalekpxa25x: Add support for USB ethernet gadget
2012-10-15 Lukasz Dalekusbether: Removed DEV_CONFIG_{CDC,SUBSET}
2012-10-15 Lukasz Dalekusbether: Define CONFIG_USB_ETH_{CDC,SUBSET}
2012-10-15 Lukasz Dalekusbether: Fixed bug when using with PXA25X chips
2012-10-15 Lucas Stachtegra20: add USB ULPI init code
2012-10-15 Lucas Stachusb: ulpi: add indicator configuration function
2012-10-15 Lucas Stachusb: ehci: don't print debug output
next