platform/kernel/linux-rpi.git
2022-03-21 Nathan ChancellorASoC: bcm: allo-piano-dac-plus: Remove unnecessary...
2022-03-21 Nathan ChancellorASoC: ma120x0p: Remove unnecessary const specifier
2022-03-21 Nathan Chancellormisc: bcm2835_smi: Use proper enum types for dma_{...
2022-03-21 coldspark29overlays: Add MAX30102 HR to i2c-sensor overlay
2022-03-21 coldspark29configs: Add CONFIG_MAX30102=m
2022-03-21 Dave Stevensondrm/vc4_hdmi: Add Broadcast RGB property to allow overr...
2022-03-21 David Plowmanmedia: i2c: imx219: Correct the minimum vblanking value
2022-03-21 Andreas Watterottupdate rpi-display-overlay.dts pins for 5.10+
2022-03-21 Phil ElwellARM: dts: BCM2711 AON_INTR2 generates IRQ edges
2022-03-21 Dave Stevensondtoverlays: Correct [h|v]sync_invert config in vc4...
2022-03-21 Dave Stevensondtoverlays: Add pwm backlight option to vc4-kms-dpi...
2022-03-21 Dave Stevensondefconfig: Add BACKLIGHT_PWM to bcm2709 and bcmrpi...
2022-03-21 Dave Stevensondrm/vc4: dsi: Correct max divider to 255 (not 7)
2022-03-21 Phil Elwellarm: Remove spurious .fnend directive
2022-03-21 Naushir Patuckdrivers: bcm2835_unicam: Disable trigger mode operation
2022-03-21 Dave Stevensondtoverlays: Add option for PoE HAT to use Linux I2C...
2022-03-21 Dave Stevensondefconfigs: Add MFD_RASPBERRYPI_POE_HAT to Pi defconfigs.
2022-03-21 Dave Stevensonpower: rpi-poe: Add option of being created by MFD...
2022-03-21 Dave Stevensonpower: rpi-poe: Drop CURRENT_AVG as it is not hardware...
2022-03-21 Dave Stevensonpwm: raspberrypi-poe: Add option of being created by...
2022-03-21 Dave Stevensonmfd: simple-mfd-i2c: Add configuration for RPi POE HAT
2022-03-21 Phil ElwellARM: dts: Remove VL805 USB node from CM4 dts
2022-03-21 Dom Cobleydrm/vc4: hdmi: Fix clock value used for validating...
2022-03-21 Dave Stevensondrm/vc4: Disable Gamma control on HVS5 due to issues...
2022-03-21 Phil Elwellarm: Fix annoying .eh_frame section warnings
2022-03-21 Phil Elwelloverlays: Add vl805 overlay
2022-03-21 Phil Elwellarm: Fix custom rpi __memset32 and __memset64
2022-03-21 Dave Stevensondrm/vc4: Add alpha_blend_mode property to each plane.
2022-03-21 marconeconfigs: add CONFIG_LEDS_TRIGGER_PATTERN=m
2022-03-21 Dave Stevensondtoverlays: Add backlight-gpio parameter to vc4-kms...
2022-03-21 Jeff LaBundyoverlays: Add overlay for Azoteq IQS550
2022-03-21 Jeff LaBundyconfigs: Enable Azoteq IQS550/572/525
2022-03-21 Padmanabha... bcm2835-v4l2-isp: Add missing lock initialization
2022-03-21 Andreas BlaesiusUse GitHubs issue form for bug reports
2022-03-21 Dave Stevensonmedia: i2c: ov9281: Increase diff between VTS and max...
2022-03-21 Andriy Gelmanstaging/bcm2835-codec: Fix typo
2022-03-21 Matthias Reichldrm/vc4: hdmi: Fix no video output on DVI monitors
2022-03-21 Matthias Reichldrm/vc4: hdmi: Fix HDMI monitor detection in polled...
2022-03-21 Dave Stevensonuapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BAS...
2022-03-21 Jakub Vaněkdtoverlays: Enable cam1_clock when using tc358743 or...
2022-03-21 Penk ChenAdd panel overlay for CutiePi
2022-03-21 Penk ChenEnable ili9881 panel and pwm backlight driver by default
2022-03-21 Penk ChenExtending ili9881c driver support for nwe080 panel
2022-03-21 David Plowmanmedia: v4l2-ctrls: Document V4L2_CID_NOTIFY_GAINS control
2022-03-21 David Plowmanmedia: v4l2-ctrls: Add V4L2_CID_NOTIFY_GAINS control
2022-03-21 Maxime Riparddrm/vc4: hdmi: Support HDMI YUV output
2022-03-21 Maxime Riparddrm/vc4: hdmi: Always try to have the highest bpc
2022-03-21 Maxime Riparddrm/vc4: hdmi: Take bpp into account for the scrambler
2022-03-21 Maxime Riparddrm/vc4: hdmi: Take the sink maximum TMDS clock into...
2022-03-21 Maxime Riparddrm/vc4: hdmi: Move clock calculation into its own...
2022-03-21 Maxime Riparddrm/vc4: hdmi: Move clock validation to its own function
2022-03-21 Maxime Riparddrm/vc4: hdmi: Change CSC callback prototype
2022-03-21 Maxime Riparddrm/vc4: hdmi: Define colorspace matrices
2022-03-21 Maxime Riparddrm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
2022-03-21 Maxime Riparddrm/vc4: hdmi: Move XBAR setup to csc_setup
2022-03-21 Maxime Riparddrm/vc4: hdmi: Use full range helper in csc functions
2022-03-21 Maxime Riparddrm/vc4: hdmi: Add full range RGB helper
2022-03-21 Maxime Riparddrm/edid: Rename drm_hdmi_avi_infoframe_colorspace...
2022-03-21 Maxime Riparddrm/edid: Don't clear YUV422 if using deep color
2022-03-21 Dom Cobleydrm/vc4: Skip writes to disabled packet RAM
2022-03-21 Maxime Riparddrm/vc4: hvs: Ignore atomic_flush if we're disabled
2022-03-21 Maxime Riparddrm/vc4: hvs: Move the dlist setup to its own function
2022-03-21 Maxime Riparddrm/vc4: hvs: Remove dlist setup duplication
2022-03-21 Maxime Riparddrm/vc4: hvs: Store channel in variable
2022-03-21 Maxime Riparddrm/vc4: kms: Take old state core clock rate into account
2022-03-21 Phil Elwellstaging/bcm2835-isp: Fix cleanup after init fail
2022-03-21 Joerg SchambacherASoC:ma120x0p: Increase maximum sample rate to 192KHz
2022-03-21 Dave Stevensondtoverlays: Add option to select camera as on CAM0...
2022-03-21 Dave StevensonARM: dts: bcm2711-cm4s Correct i2c0mux to use 0/1 and...
2022-03-21 Dave Stevensonmedia: i2c: ov7251: Make the enable GPIO optional.
2022-03-21 Dave Stevensondtoverlays: Convert ov5647 to use the regulator framework
2022-03-21 Dave Stevensonmedia: i2c: ov5647: Add support for regulator control.
2022-03-21 Dave Stevensondtoverlays: Convert the camera sensor overlays to use...
2022-03-21 Dave Stevensondt: Create static regulators and clocks for camera...
2022-03-21 Phil Elwelldrm/vc4: Fix build without DRM_VC4_HDMI_CEC
2022-03-21 Jonathan Bellusb: xhci: add VLI_TRB_CACHE_BUG quirk
2022-03-21 Jonathan Bellxhci: refactor out TRBS_PER_SEGMENT define in runtime...
2022-03-21 peterharperukARM: dts: Create bcm2711-rpi-cm4s.dts (#4761)
2022-03-21 popcornmixvc4/drm: Ignore vc4_hdmi->output_enabled for allowing...
2022-03-21 Naushir Patuck media: imx219: Advertise embedded data node on media...
2022-03-21 Jonathan Bellxhci: correct room_on_ring() for cases where there...
2022-03-21 Jonathan Bellxhci: quirks: add link TRB quirk for VL805
2022-03-21 Dave Stevensondtoverlays: Add a generic DPI panel overlay for KMS
2022-03-21 Dave Stevensondt: bcm270x: Add GPIO defines for RGB565 DPI output...
2022-03-21 Dave Stevensondrm/vc4: dpi: Ensure a default format is selected
2022-03-21 Dave Stevensondrm/vc4: dpi: Add option for inverting pixel clock...
2022-03-21 Dave Stevensondrm/panel-simple: Allow the bus format to be read from...
2022-03-21 Dave Stevensondrm/panel-simple: Populate bpc when using panel-dpi
2022-03-21 Phil Elwelloverlays: vc4-kms-v3d: Change composite handling
2022-03-21 Dave Stevensondt: bcm283x: Change BCM283x HDMI to use firmware clock...
2022-03-21 Dave Stevensonclk: bcm: rpi: Add the BCM283x pixel clock.
2022-03-21 Dave Stevensondrm/vc4: Move HDMI reset to pm_resume
2022-03-21 Dave Stevensoninput: edt-ft5x06: Only look at the number of points...
2022-03-21 Dave Stevensonregulator/rpi-panel-attiny: Use two transactions for...
2022-03-21 Dave Stevensonregulator/rpi-panel-attiny: Don't read the LCD power...
2022-03-21 Naushir Patuckdrivers: bcm2835_unicam: Add logging message when a...
2022-03-21 Dave Stevensonstaging/bcm2835-codec: Allow a different stride alignme...
2022-03-21 John Coxmedia: rpivid: remove min_buffers_needed from src queue
2022-03-21 Dave Stevensonstaging/bcm2835-codec: bytesperline for YUV420/YVU420...
2022-03-21 Dave Stevensondtoverlays: Use edt-ft5506 for 10 points, instead of...
next