platform/kernel/linux-amlogic.git
2010-08-02 Nishanth Menonomap2/3/4: serial: remove initialization sparse warnings
2010-08-02 Govindraj Romap3: serial: Add context save and restore for mcr
2010-08-02 David Andersomap4: Add OMAP4 Panda Support
2010-08-02 Hemanth VOMAP4: Add GPIO LED support for SDP board
2010-08-02 Shubhrajyoti... omap4: Board changes for 4430sdp tmp105 temperature...
2010-08-02 Santosh Shilimkaromap4: mmc: Fix the regulator resource for MMC2 on...
2010-08-02 Mathias Nymanomap: tsl2563 ALS support for Nokia N900
2010-08-02 Jarkko Nikulaomap: rx51: Add supply and data for the tpa6130a2 headp...
2010-08-02 Jarkko Nikulaomap: rx51: Use REGULATOR_SUPPLY macro when initializin...
2010-08-02 Jarkko Nikulaomap: rx51: Add platform_data for tlv320aic3x with...
2010-08-02 Jarkko Nikulaomap: rx51: Set regulator V28 always on
2010-08-02 Grazvydas Ignotasomap3: pandora: add NAND and wifi support
2010-08-02 Grazvydas Ignotasomap3: pandora: update gpio-keys data
2010-08-02 Ohad Ben-Cohenomap: zoom3: wlan board muxing
2010-08-02 Ohad Ben-Cohenomap: zoom2: wlan board muxing
2010-07-05 Thomas WeberOMAP2: Devkit8000: Fix regulator for power supply
2010-07-05 Thomas WeberOMAP2: Devkit8000: Remove unused omap_board_config
2010-07-05 Thomas WeberOMAP2: Devkit8000: Using gpio_is_valid macro
2010-07-05 Thomas WeberOMAP2: Devkit8000: Using the REGULATOR_SUPPLY macro
2010-07-05 Thomas WeberOMAP2: Devkit8000: Remove en-/disable for tv panel
2010-07-05 Thomas WeberOMAP2: Devkit8000: Remove non existing vsim supply
2010-07-05 Thomas WeberOMAP2: Devkit8000: Remove unneeded VDVI supply
2010-07-05 Kan-Ru ChenOMAP2: Devkit8000: Setup LCD reset
2010-07-05 Kan-Ru ChenOMAP2: Devkit8000: Enable DVI-D output
2010-07-05 Thomas WeberOMAP2: Devkit8000: change panel to generic panel
2010-07-05 Thomas WeberOMAP2: Devkit8000: Cleanup for power supplies
2010-07-05 Christoph EggerRemoving dead MACH_OMAP2_H4_USB1
2010-07-05 Christoph EggerRemoving dead MACH_OMAP_H4_OTG
2010-07-05 Christoph EggerRemoving dead APM
2010-07-05 Christoph EggerReplacing LEDS_OMAP_DEBUG with OMAP_DEBUG_LEDS
2010-07-05 Christoph EggerRemoving dead OMAP_STI
2010-07-05 Christoph EggerRemoving dead OMAP_DSP
2010-07-05 Christoph EggerRemoving dead OMAP_IR
2010-07-05 Christoph EggerReplace dead OMAP_MUX_ERRORS with OMAP_MUX_WARNINGS
2010-07-05 Tony Lindgrenomap2/3/4: Add Kconfig option to compile in typical...
2010-07-05 Tony Lindgrenomap2/3/4: Select all omaps and boards by default
2010-07-05 Tony Lindgrenomap2/3/4: Move Kconfig options to mach-omap2/Kconfig
2010-07-05 Tony Lindgrenomap: Make omap specific features appear under Kconfig...
2010-07-05 Tony Lindgrenomap: Use 32KiHZ timer by default
2010-07-05 Tony LindgrenARM: Disable VGA console for ARM in most cases
2010-07-05 Tony Lindgrenomap: mux: Remove old mux code
2010-07-05 Tony Lindgrenomap: mux: Convert 2420 platform init code to use new...
2010-07-05 Tony Lindgrenomap: mux: Mux 2430 USB0HS_STP in board-2430.c
2010-07-05 Tony Lindgrenomap: mux: Mux Apollon LCD power in board-apollon.c
2010-07-05 Tony Lindgrenomap: mux: Do keypad muxing in board-*.c files
2010-07-05 Tony Lindgrenomap: mux: Make omap2 FS USB code use new mux functions
2010-07-05 Tony Lindgrenomap: mux: Select POP package for 2430SDP
2010-07-05 Tony Lindgrenomap: mux: Select POP package for N8X0
2010-07-05 Tony Lindgrenomap: mux: Select POP package for Apollon
2010-07-05 Tony Lindgrenomap: mux: Select SIP package for H4
2010-07-05 Tony Lindgrenomap: mux: Add data for 2430
2010-07-05 Tony Lindgrenomap: mux: Add data for 2420
2010-07-05 Tony Lindgrenomap: mux: Remove unncessary parens from mux34xx.c
2010-07-05 Tony Lindgrenomap: mux: Allow compiling in new mux code on all mach...
2010-07-05 Tony Lindgrenomap: mux: Renumber package defines to make room for...
2010-07-05 Tony Lindgrenomap: mux: Fix omap_mux_init_gpio for omap24xx
2010-07-05 Tony Lindgrenomap: Move omap1 USB platform init code into mach-omap1...
2010-07-05 Tony Lindgrenomap: Enable interface clock for omap2 FS USB
2010-07-05 Tony Lindgrenomap: Move omap2 FS USB platform init code into mach...
2010-07-05 Tony Lindgrenomap: Separate out omap2 FS USB platform init functions
2010-07-02 Tony LindgrenMerge branch 'v2.6.35-rc3-iommu-for-next' of git:/...
2010-06-30 Linus TorvaldsMerge git://git./linux/kernel/git/gregkh/usb-2.6
2010-06-30 Linus TorvaldsMerge git://git./linux/kernel/git/gregkh/tty-2.6
2010-06-30 Linus TorvaldsMerge branch 'omap-fixes-for-linus' of git://git./linux...
2010-06-30 Jes SorensenAdd mdr as maintainer of qla1280 driver.
2010-06-30 Michal Hockofutex: futex_find_get_task remove credentails check
2010-06-30 Michal NazarewiczUSB: gadget: f_mass_storage: stale common->fsg value...
2010-06-30 Michal NazarewiczUSB: gadget: f_mass_storage: fixed fs descriptors not...
2010-06-30 Hema HKUSB: musb: Enable the maximum supported burst mode...
2010-06-30 Mike FrysingerUSB: musb: fix Blackfin ulpi stubs
2010-06-30 Sergei ShtylyovUSB: MUSB: make non-OMAP platforms build with CONFIG_PM=y
2010-06-30 Sergei ShtylyovUSB: musb_core: make disconnect and suspend interrupts...
2010-06-30 Alan SternUSB: obey the sysfs power/wakeup setting
2010-06-30 Jiri PinkavaUSB: gadget eth: Fix calculate CRC32 in EEM
2010-06-30 Axel LinUSB: qcserial: fix a memory leak in qcprobe error path
2010-06-30 Jiri SlabyUSB: gadget/printer, fix sleep inside atomic
2010-06-30 Jiri SlabyUSB: isp1362-hcd, fix double lock
2010-06-30 Daniel SangorrinUSB: serial: ftdi: correct merge conflict with CONTEC id
2010-06-30 Alan SternUSB: fix oops in usb_sg_init()
2010-06-30 Vladimir ZapolskiyUSB: s3c2410: deactivate endpoints before gadget unbinding
2010-06-30 Wolfram SangUSB: ehci-mxc: bail out on transceiver problems
2010-06-30 Wolfram SangUSB: otg/ulpi: bail out on read errors
2010-06-30 Maulik Mankadusb: musb: Fix a bug by making suspend interrupt availa...
2010-06-30 Nobuhiro IwamatsuUSB: r8a66597: Fix failure in change of status
2010-06-30 Sarah SharpUSB: xHCI: Fix bug in link TRB activation change.
2010-06-30 Michal NazarewiczUSB: gadget: g_fs: possible invalid pointer reference...
2010-06-30 Jon PoveyUSB: g_serial: fix tty cleanup on unload
2010-06-30 Jon PoveyUSB: g_serial: don't set low_latency flag
2010-06-30 Dongdong Dengserial: cpm_uart: implement the cpm_uart_early_write...
2010-06-29 Andrew Mortonfs/fcntl.c:kill_fasync_rcu() fa_lock must be IRQ-safe
2010-06-29 Liu Aleaxanderum: os-linux/mem.c needs sys/stat.h
2010-06-29 Wan ZongShundrivers/video/nuc900fb.c: fix lcd build error
2010-06-29 Lubomir Rintelsysvfs: fix NULL deref. when allocating new inode
2010-06-29 David Brownelldrivers/gpio is platform-neutral
2010-06-29 Joakim Tjernlundrtc: fix ds1388 time corruption
2010-06-29 Nicolas FerreMAINTAINERS: some Atmel drivers change maintainer
2010-06-29 Masami HiramatsuMAINTAINERS: Masami Hiramatsu has moved
2010-06-29 Martin Wilckipmi: set schedule_timeout_wait() value back to one
2010-06-29 Lee Schermerhornmempolicy: fix dangling reference to tmpfs superblock...
2010-06-29 Matthew Garrettipmi: make sure drivers were registered before unregist...
next