platform/kernel/u-boot.git
2018-02-05 Maxime RipardMAINTAINERS: Update email address for Maxime Ripard
2018-02-04 Tom RiniMerge git://git.denx.de/u-boot-dm
2018-02-04 Tom RiniMerge git://git.denx.de/u-boot-imx
2018-02-04 Bryan O'Donoghueimx: mx7: run sec_init for CAAM RNG
2018-02-04 Bryan O'Donoghuedrivers/crypto/fsl: assign job-rings to non-TrustZone
2018-02-04 Eran Matityahui2c: imx: Take mx6dqp in consideration in the I2C_PADS_...
2018-02-04 Eran Matityahuiomux-v3: Take mx6dqp in consideration for imx_iomux_v3...
2018-02-04 Fabio Estevamdoc: mxc_hab: Improve the config option list
2018-02-04 Stefan Agnerarm: dts: imx6ull: move input include to base device...
2018-02-04 Fabio Estevammx6sabresd: Add fastboot support
2018-02-04 Fabio Estevammx6sabresd: Select CONFIG_CMD_USB_MASS_STORAGE
2018-02-04 Fabio Estevammx6sabre_common: Allow building CONFIG_USB_FUNCTION_MAS...
2018-02-04 Soeren Mochboard: tbs2910: add private imx config
2018-02-04 Michael Trimarchiimx: mx25: Remove SION bit in all pin-mux that are...
2018-02-04 Peng Fanimx: mx7dsabresd: enable UHS and HS200
2018-02-04 Peng Fanmmc: fsl_esdhc: support SDR104 and HS200
2018-02-04 Peng FanARM: dts: add pinmux and tuning settings for HS200...
2018-02-04 Peng Fanmmc: fsl_esdhc: add strobe and tuning entry
2018-02-04 Eric Nelsonmx6memcal: fix comment in board header file
2018-02-04 Eric Nelsonmx6memcal: enable SDP support
2018-02-04 Eric Nelsonmx6memcal: launder through savedefconfig
2018-02-04 Patrick Bruennarm: imx: mx53loco: remove usage of mx53_dram_size
2018-02-04 Patrick Bruennarm: imx: m53evk: remove usage of mx53_dram_size
2018-02-04 Patrick Bruennarm: imx: cx9020: move dram init into common place
2018-02-04 Patrick Bruennarm: imx: cx9020: remove usage of mx53_dram_size
2018-02-04 Nandor Hanboard,ge,bx50v3 - rtc time validation
2018-02-04 Ian Rayconfigs: ge_bx50v3: automatic partition selection and...
2018-02-04 Hannu Lounentoboard: ge: bx50v3: mount rootfs read-only
2018-02-04 Ian Rayconfigs: ge_bx50v3: enable bootcount
2018-02-04 Ian Rayconfig: ge_bx50v3: read boot script
2018-02-04 Ian Rayboard: ge: bx50v3: Support FIT and select configuration...
2018-02-04 Martyn Welchboard: ge: bx50v3: Enable hardware watchdog
2018-02-04 Hannu Lounentoboard: ge: bx50v3: program MAC address to I210
2018-02-04 Martyn Welchboard: ge: bx50v3: move FEC MAC address programming...
2018-02-04 Ian Rayconfigs: Add network device support for bx50v3 products
2018-02-04 Martyn Welchboard: ge: Enable access to i2c bus 1 and 2
2018-02-04 Nandor Hanrtc: adding RX8010SJ rtc driver
2018-02-04 Hannu Lounentonet: e1000: implement eth_write_hwaddr
2018-02-04 Hannu Lounentonet: e1000: split e1000_read_mac_addr
2018-02-04 Hannu Lounentonet: e1000: add support for writing to EEPROM
2018-02-04 Peng Fanimx: mx8m: add ddr controller memory map
2018-02-04 Peng Fanpower: pmic/regulator allow dm be omitted by SPL
2018-02-04 Peng Fanimx: imx8mq: add dtsi file
2018-02-04 Ye Linet: fec: fix build warnings for 64bits support
2018-02-04 Peng Fannet: fec: do not access reserved register for i.MX8M
2018-02-04 Peng Fangpio: mxc: add i.MX8M support
2018-02-04 Peng Fanimx: lcdif: include i.MX8M
2018-02-04 Peng Fanmmc: fsl_esdhc: support i.MX8M
2018-02-04 Peng Fanmisc: ocotp: add i.MX8M support
2018-02-04 Peng Fanimx: makefile: compile files for i.MX8M
2018-02-04 Peng Fanimx: mx8m: add soc related settings and files
2018-02-04 Peng Fanimx: mx7: move mmc env code to mmc_env.c
2018-02-04 Peng Fanimx: cpu: support get_boot_device for i.MX8M
2018-02-04 Peng Fanimx: mx7: move get_boot_device to cpu.c
2018-02-04 Peng Fanimx: bootaux: support i.MX8M
2018-02-04 Peng Fanimx: cleanup bootaux
2018-02-04 Peng Fanimx: refactor imx_get_mac_from_fuse
2018-02-04 Peng Fanimx: cpu: add cpu speed/grade for i.MX8M
2018-02-04 Peng Fanimx: cpu: move speed/temp to common cpu
2018-02-04 Peng Fanimx: add pad settings bit definition for i.MX8M
2018-02-04 Peng Fanimx: add i.MX8MQ SoC Revision and is_mx8m helper
2018-02-04 Peng Fanimx: spl: implement spl_boot_device for i.MX8M
2018-02-04 Peng Fanimx: cpu: update cpu file to support i.MX8M
2018-02-04 Peng Fanimx: boot_mode: add USB_BOOT entry
2018-02-04 Peng Fanimx: add sip function
2018-02-04 Peng Fanimx: mx8m: add clock driver
2018-02-04 Peng Fanimx: mx8m: add pin header file
2018-02-04 Peng Fanimx: mx8m: add register definition header file
2018-02-04 Peng Fanimx: add i.MX8M into Kconfig
2018-02-04 Jagan Tekiconfigs: icore: enable nand on mmc defconfig
2018-02-04 Jagan Tekiconfigs: enable spl support wrt env device
2018-02-04 Anson Huangimx: mx7: psci: add system power off support
2018-02-04 Anson Huangimx: mx7: psci: add system reset support
2018-02-04 Anson Huangmx7_common: use psci 1.0 instead of 0.1
2018-02-04 Jagan Tekiboard: i.MX6QDL: add Engicam i.CoreM6 1.5 QDL MIPI...
2018-02-03 Heinrich Schuchardtlog: add category LOGC_EFI
2018-02-03 Simon Glasslog: Add a way to log error-return values
2018-02-03 Simon Glasslog: Add documentation for commands and formatting
2018-02-03 Simon Glasslog: Add tests for the new log features
2018-02-03 Simon Glasslog: Add a command to output a log record
2018-02-03 Simon Glasslog: Add a command to control the log output format
2018-02-03 Simon Glasslog: Update log_console to honour the log format
2018-02-03 Simon Glasslog: Add control over log formatting
2018-02-03 Simon Glasslog: Add functions to convert IDs to/from names
2018-02-03 Simon Glassdm: core: Add a function to look up a uclass by name
2018-02-02 Lukasz MajewskiKconfig: usb: rockchip: Remove not needed *_defconfig...
2018-02-02 Lukasz Majewskiusb: ums: Kconfig: Select USB_FUNCTION_MASS_STORAGE...
2018-02-02 Lukasz MajewskiKconfig: gadget: Move CONFIG_USB_FUNCTION_MASS_STORAGE...
2018-02-02 Lukasz MajewskiKconfig: gadget: Move CONFIG_USB_FUNCTION_THOR to Kconfig
2018-02-02 Lukasz MajewskiKconfig: usb: Sort USB_FUNCTION_* entries
2018-02-01 Simon Goldschmidtenv: sf: use env_import_redund to simplify env_sf_load
2018-02-01 Simon Goldschmidtenv: make env drivers propagate env_import return value
2018-02-01 Simon Goldschmidtenv: move more common code to env_import_redund
2018-01-31 Simon Goldschmidtenv: make env_import(_redund) return 0 on success,...
2018-01-31 Simon Goldschmidtcmd: nvedit: env_get_f must check for env_get_char...
2018-01-31 Tom RiniMerge git://git.denx.de/u-boot-fsl-qoriq
2018-01-31 Tom Rinidavinci: Fix omapl138_lcdk builds
2018-01-31 Tom RiniMerge tag 'xilinx-for-v2018.03' of git://git.denx.de...
2018-01-30 Adam FordConvert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig
2018-01-30 Adam FordConvert CONFIG_SYS_DV_CLKMODE et al to Kconfig
next