kernel/u-boot.git
2010-05-12 York SunEnabled support for Rev 1.3 SPD for DDR2 DIMMs
2010-05-12 Kumar Gala85xx/fsl-sata: Use is_serdes_configured() to determine...
2010-05-12 Kumar Gala85xx/mpc8536ds: Use is_serdes_configured() to determine...
2010-05-12 Kumar Gala85xx: Add is_serdes_configured() support to MPC8536...
2010-05-12 Jerry Huangfsl-diu: Using I/O accessor to CCSR space
2010-05-08 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
2010-05-07 Andre Schwarzmpc83xx/mvBLM7: add usb commands and cleanup.
2010-05-07 Ron Madridmpc83xx: Add UPMA configuration to SIMPC8313
2010-05-06 Mike Frysingerserial: punt unused serial_addr()
2010-05-06 Mike Frysingerupdate include/asm/ gitignore after move
2010-05-06 Kumar GalaFixup native builds on powerpc
2010-05-06 Serge Ziryukincmd_usb.c: show cmd usage if no args given
2010-05-06 Stefan Roesepowerpc: Consolidate bootcount_{store|load} for PowerPC
2010-05-06 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-i2c
2010-05-05 Ender.Daidrivers/*/Makefile: fix conditional compile rule.
2010-05-05 Larry JohnsonMove test for unnecessary memmove to memmove_wd()
2010-05-05 Mike Frysingercompiler.h: add uint typedef
2010-05-05 Trübenbach... command.c: Enable auto tab for the editenv command
2010-05-05 Reinhard Arlt74xx_7xx: CPCI750: Add ECC support on esd CPCI-CPU...
2010-05-05 Graeme Russsc520: Fix minor DRAM Controller Setup bug
2010-05-05 Graeme Russsc520: Update to new AMD Copyright
2010-05-05 Graeme RusseNET: Implement eNET Watchdog
2010-05-05 Graeme RusseNET: Use SC520 MMCR to reset eNET board
2010-05-05 Graeme RusseNET: Add PC/AT compatibility setup function
2010-05-05 Graeme RusseNET: Add support for onboard RTL8100B (RTL8139) chips
2010-05-05 Graeme Russsc520: Board Specific PCI Init
2010-05-05 Graeme Russsc520: Move PCI defines to PCI include file
2010-05-05 Graeme RusseNET: Fix CONFIG_SYS_HZ to be 1000
2010-05-05 Graeme RusseNET: Fix Flash Write
2010-05-05 Graeme Russsc520: Allow boards to override udelay
2010-05-05 Graeme Russx86: Fix support for booting bzImage
2010-05-05 Graeme Russx86: Provide weak PC/AT compatibility setup function
2010-05-05 Graeme Russx86: Use CONFIG_SERIAL_MULTI
2010-05-05 Graeme RussSERIAL: Enable port-mapped access
2010-05-05 Graeme Russx86: Fix copying of Real-Mode code into RAM
2010-05-05 Graeme Russx86: Pass relocation offset into Global Data
2010-05-05 Graeme Russx86: Move GDT to a safe location in RAM
2010-05-05 Graeme Russx86: Add RAM bootstrap functionality
2010-05-05 Graeme Russx86: Split sc520 memory sizing versus reporting
2010-05-05 Graeme Russx86: Fix sc520 memory size reporting
2010-05-05 Graeme Russx86: Fix do_go_exec()
2010-05-05 Graeme Russx86: Add register dump to crash handlers
2010-05-05 Graeme Russx86: Fix MMCR Access
2010-05-05 Graeme Russx86: #ifdef out getenv_IPaddr()
2010-05-05 Graeme Russx86: Add unaligned.h
2010-05-05 Michael ZaidmanPOST: Added ECC memory test for mpc83xx.
2010-05-05 Frans Meulenbroekscmd_onenand.c: moved to standard subcommand handling
2010-05-05 Norbert van... ppc: unused memory region too close to current stack...
2010-05-05 Timur Tabiallow print_size to print large numbers on 32-bit systems
2010-05-05 Timur Tabifix print_size printing fractional gigabyte numbers...
2010-05-05 Mike FrysingerBlackfin: TWI/I2C: implement multibus support
2010-05-04 Kim Phillipsconfigs: remove unused CONFIG_COMMAND_HISTORY
2010-05-04 Anatolij Gustschinmvsmr: fix link error
2010-05-04 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-net
2010-05-04 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2010-05-03 Mike FrysingerBlackfin: bfin_mac: hook up new write_hwaddr function
2010-05-03 Thomas Chounet: ethoc: add write_hwaddr support
2010-05-03 Thomas Chounet: altera_tse: add write_hwaddr support
2010-05-03 Heiko Schochernet: fec_mxc: add write_hwaddr support
2010-05-03 Prafulla Wadaskarnet:kirkwood_egiga.c: MAC addresses programming using...
2010-05-03 Ben WarrenProgram net device MAC addresses after initializing
2010-05-03 Thomas Chounet: add altera triple speeds ethernet mac driver
2010-05-03 Thomas Chounet: add opencore 10/100 ethernet mac driver
2010-05-03 Valentin Yakovenkovsmc911x driver frame alignment patch
2010-05-03 Prafulla Wadaskarnet: Kirkwood_egiga.c bugfixes for rx path
2010-05-03 Eric Jarrigefec_mxc.c: Fix MX27 FEC MAC validity check
2010-05-03 Andy Flemingtsec: Wait for both RX and TX to stop
2010-05-03 Mike Frysingernet: dm9000x: use standard I/O accessors
2010-05-03 Detlev Zundelmpc512x_fec: Move PHY initialization from probe into...
2010-05-03 John Rigbyfec_mxc don't use internal eeprom on MX25
2010-05-03 Wolfgang Wegnerfix lockup in mcfmii/mii_discover_phy() in case communi...
2010-05-03 Richard Retanubun83xx: UEC: Added support for bitBang MII driver access...
2010-05-03 Robin Getz./net/net.c - make Microsoft dns servers happy with...
2010-05-03 Detlev ZundelRemove unused "local_crc32" function.
2010-05-03 Detlev Zundelnet: Trivial coding style issue with empty for statement
2010-05-03 Prafulla Wadaskarnet: Kirkwood_egiga.c: fixed build warnings
2010-04-30 Wolfgang DenkMerge branch 'master' of ssh://gemini/home/wd/git/u...
2010-04-30 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-ppc4xx
2010-04-30 Asen Dimovpm9263 converted to at91 soc access
2010-04-30 Asen Dimovat91: define matrix registers bit fields
2010-04-30 Stefano BabicMX31: Removed erroneous board name from QONG
2010-04-30 Stefano BabicMX31: Add UBI support to QONG module
2010-04-30 Stefano BabicMX31: Support 128MB RAM on QONG module
2010-04-30 Stefano BabicMX31: Add support for NAND to QONG board
2010-04-30 Stefano BabicMX31: add pin definitions for NAND controller
2010-04-30 Stefano BabicMX31: add accessor function to get a gpio
2010-04-30 Stefano Babicmx51evk: correct list of possible BOOT_FROM values
2010-04-30 Stefano Babicmkimage: correct spelling error in imximage
2010-04-30 John RigbyMX25 print arm clock instead of mpllclk on boot
2010-04-30 Frans Meulenbroeksconfigs/openrd_base.h: reordered macros
2010-04-30 Frans Meulenbroeksconfigs/sheevaplug: added a few additional commands
2010-04-30 Siddarth GoreMarvell GuruPlug Board Support
2010-04-30 Stefano BabicMoved board specific values in config file
2010-04-30 Fabio EstevamMX51EVK: Remove CPLD related code
2010-04-30 Heiko Schocherarm, i.mx27: add support for magnesium board from proje...
2010-04-30 Heiko Schocherarm, mx27: add support for SDHC1 pin init
2010-04-30 Minkyu KangSAMSUNG: make s5p common gpio functions
2010-04-30 Minkyu KangSAMSUNG: serial: modify name from s5pc1xx to s5p
2010-04-30 Asen Dimovpm9263: remove CONFIG_CMD_AUTOSCRIPT
2010-04-30 Alexander Hollerat91: add defines for RTT and GPBR
next