kernel/u-boot.git
2012-03-29 Simon Glassarm: fdt: Add skeleton device tree file from kernel
2012-03-29 Simon Glassfdt: Add basic support for decoding GPIO definitions
2012-03-29 Simon Glassfdt: Add functions to access phandles, arrays and bools
2012-03-29 Simon Glassfdt: Tidy up a few fdtdec problems
2012-03-29 Simon Glassfdt: Add tests for fdtdec
2012-03-29 Simon Glassfdt: Add fdtdec_find_aliases() to deal with alias nodes
2012-03-29 Tom Warrenarm: Tegra2: Fix ELDK42 gcc failure with inline asm...
2012-03-29 Eric Nelsonnet: fec_mxc: allow use with cache enabled
2012-03-29 Eric Nelsonnet: force PKTALIGN to ARCH_DMA_MINALIGN
2012-03-29 Marek Vasuti.MX28: Enable caches by default
2012-03-29 Marek Vasuti.MX28: Make use of the bounce buffer
2012-03-29 Marek Vasuti.MX28: Do data transfers via DMA in MMC driver
2012-03-29 Marek VasutMMC: Implement generic bounce buffer
2012-03-29 Marek Vasuti.MX28: Add cache support to MXS NAND driver
2012-03-29 Marek Vasuti.MX28: Add cache support into the APBH DMA driver
2012-03-29 Marek VasutARM926EJS: Implement cache operations
2012-03-28 Anatolij Gustschinboard/vpac270/onenand.c: Fix build errors
2012-03-28 Anatolij Gustschinnhk8815: fix build errors
2012-03-28 Andreas Bießmannatmel-boards: add missing atmel_mci.h
2012-03-28 Rob HerringARM: highbank: setup env from boot source register
2012-03-28 Jason HobbsARM: highbank: change env config to use nvram
2012-03-28 Rob HerringARM: highbank: add reset support
2012-03-28 Rob HerringARM: highbank: Add boot counter support
2012-03-28 Rob HerringARM: highbank: change TEXT_BASE to 0x8000
2012-03-28 Rob HerringARM: highbank: fix us_to_tick calculation
2012-03-28 Rob HerringARM: highbank: add missing get_tbclk
2012-03-28 Rob HerringARM: highbank: fix warning for calxedaxgmac_initialize
2012-03-28 Rob Herringnet: calxedaxgmac: fix build due to missing __aligned...
2012-03-27 Chander KashyapEXYNOS: Add structure for Exynos4 DMC
2012-03-27 Doug AndersonEXYNOS: SMDK5250: Support all 4 UARTs
2012-03-27 David Müller... ARM: fix s3c2410 timer code
2012-03-27 Heiko SchocherARM: davinci: fixes for cam_enc_4xx board
2012-03-27 jacopo mondiomap3_spi: receive transmit mode
2012-03-27 Christian Rieschcalimain, enbw_cmc: Fix typo in comments
2012-03-27 Stefano BabicDavinci: ea20: use gpio framework to access gpios
2012-03-27 Stefano BabicOMAP3: mt_ventoux: sets its own mtdparts
2012-03-27 Stefano BabicOMAP3: mt_ventoux: updated timing for FPGA
2012-03-27 Grazvydas Ignotastwl4030: fix potential power supply handling issues
2012-03-27 Stefano BabicNAND: TI: fix warnings in omap_gpmc.c
2012-03-27 Tom Rinicam_enc_4xx: Rename 'images' to 'imgs'
2012-03-27 Simon Schwarzarm: Add Prep subcommand support to bootm
2012-03-27 Stefano BabicOMAP3: twister: add support to boot Linux from SPL
2012-03-27 Stefano BabicSPL: call cleanup_before_linux() before booting Linux
2012-03-27 Stefano BabicOMAP3: SPL: do not call I2C init if no I2C is set.
2012-03-27 Stefano BabicAdd cache functions to SPL for armv7
2012-03-27 Simon Schwarzdevkit8000: Implement and activate direct OS boot
2012-03-27 Simon Schwarzomap/spl: change output of spl_parse_image_header
2012-03-27 Simon Schwarzomap-common/spl: Add linux boot to SPL
2012-03-27 Simon Schwarzdevkit8000/spl: init GPMC for dm9000 in SPL
2012-03-27 Simon Schwarzomap-common: Add NAND SPL linux booting
2012-03-27 Simon Schwarzdevkit8000: add config for spl command
2012-03-27 Simon SchwarzAdd cmd_spl command
2012-03-27 Fabio Estevammx53ard: Initialize return code with error
2012-03-27 Fabio Estevammx53: Make PLL2 to be the parent of UART clock
2012-03-27 Fabio Estevamconfigs: imx: Use CONFIG_SF_DEFAULT_CS
2012-03-27 Fabio Estevammx28evk: Provide default values for SPI bus and chip...
2012-03-27 Fabio EstevamUSB: ehci-mx6: Add proper IO accessors
2012-03-27 Fabio Estevammx6: Read silicon revision from register
2012-03-27 Marek Vasuti.MX28: Drop __naked function from spl_mem_init
2012-03-27 Fabio Estevammxs_spi: Return proper timeout error
2012-03-27 Marek Vasuti.MX28: Make the stabilization delays shorter
2012-03-27 Fabio Estevampmic_i2c: Return error in case of invalid pmic_i2c_tx_num
2012-03-27 Fabio Estevammx6: Remove duplicate definition of ANATOP_BASE_ADDR
2012-03-27 Fabio Estevammx6: Fix reset cause for Power On Reset case
2012-03-27 Eric Nelsoni.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
2012-03-27 Eric Nelsoni.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
2012-03-27 Marek Vasuti.MX28: Enable additional DRAM address bits
2012-03-27 Eric Nelsonmx6q: mx6qsabrelite: setup_spi() should be called in...
2012-03-27 Helmut Raigermx31: add "ARM11P power gating" to get_reset_cause
2012-03-27 Fabio Estevammx31pdk: Fix CONFIG_SYS_MEMTEST_END
2012-03-27 Fabio Estevamefikamx: Fix CONFIG_SYS_MEMTEST_END
2012-03-27 Fabio Estevammx53smd: Fix CONFIG_SYS_MEMTEST_END
2012-03-27 Fabio Estevammx53evk: Fix CONFIG_SYS_MEMTEST_END
2012-03-27 Fabio Estevammx51evk: Fix CONFIG_SYS_MEMTEST_END
2012-03-27 Eric Nelsoni.MX6: mx6qsabrelite: add ext2 support
2012-03-27 Dirk Behmeimximage: Remove overwriting of flash_offset
2012-03-26 Marek VasutIXP: Fix GPIO_INT_ACT_LOW_SET()
2012-03-26 Marek VasutIXP: Fix NAND build warning on PDNB3 and SCPU
2012-03-26 Marek VasutIXP: Move PDNB3 and SCPU from Makefile to boards.cfg
2012-03-26 Marek VasutIXP: Squash warnings in IXP NPE
2012-03-26 Marek VasutIXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
2012-03-26 Marek VasutIXP: Make IXP buildable with arm-linux- toolchains
2012-03-26 Marek VasutExamples: Properly append LDFLAGS to LD command
2012-03-26 Matt PorterSPL: Enable YMODEM support on BeagleBone and AM335x EVM
2012-03-26 Matt PorterSPL: Add YMODEM over UART load support
2012-03-26 Tom RiniSPL: Add README.omap3
2012-03-26 Tom RiniREADME: document more SPL config options
2012-03-26 Tom Rinispl.c: Use __noreturn decorator
2012-03-26 Tom Riniconfig.mk: Check for -fstack-usage support
2012-03-26 Tom Riniconfig.mk: Make cc-option create a file under include...
2012-03-26 Tom Rini.gitignore: Add .su files
2012-03-26 Robert DelienFix erroneous 32-bit access to hw_clkctrl_frac0 and...
2012-03-26 Robert DelienIntroducing 8-bit wide register, mx28_register_8
2012-03-26 Robert DelienRenamed mx28_register to mx28_register_32 to prepare...
2012-03-26 Marek Vasuti.MX28: Reformat the DRAM memory configuration data
2012-03-26 Marek VasutM28: Support for the old M28 SoM v1.0
2012-03-26 Marek VasutM28: Fix LCD PINMUX
2012-03-26 Wolfgang Grandeggermx6qsabrelite: add and enable USB Host 1 support
2012-03-26 Wolfgang Grandeggerusb/ehci: Add USB support for the MX6Q
2012-03-26 Dirk Behmemx6q: mx6qsabrelite: Update the README
next