platform/kernel/u-boot.git
2012-09-29 Albert ARIBAUDMerge remote-tracking branch 'u-boot-imx/master'
2012-09-29 Albert ARIBAUDMerge remote-tracking branch 'u-boot-atmel/master'
2012-09-24 Otavio Salvadormx28evk: Add missing 'setexpr' command
2012-09-24 Eric Nelsoni.MX: shut down video before launch of O/S
2012-09-24 Eric Nelsoni.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine...
2012-09-24 Fabio Estevammx28evk: Remove fecmxc_mii_postcall()
2012-09-23 Benoît ThébaudeauKARO TX25: Fix NAND Flash R/W cycle times
2012-09-23 Benoît Thébaudeaumx51evk: Add CONFIG_REVISION_TAG
2012-09-20 Albert ARIBAUDMerge remote-tracking branch 'u-boot-imx/master'
2012-09-17 Bo ShenAtmel: sam9g10/9m10/9x5: Add support to boot DT kernel
2012-09-17 Bo Shenspiflash: at25: using common spi flash operation
2012-09-17 Bo Shenspi: add atmel at25df321 serial flash support
2012-09-17 Fabio Estevammx35pdk: README: Remove NAND references
2012-09-17 Otavio Salvadormx28evk: extend default environment
2012-09-17 Stefano BabicMX6: drop binary constants from iomux header
2012-09-13 Wu, Joshatmel_nand: fix the U-Boot output information about...
2012-09-13 Wu, Joshat91sam9x5: set default EBI I/O drive configuration.
2012-09-10 Tom WarrenNAND: MXS: include common.h first so cache.h is include...
2012-09-10 Tom WarrenTegra: Change Tegra20 to Tegra in common code, prep...
2012-09-10 Lucas Stachtegra20: usb: rework set_host_mode
2012-09-10 Stefano BabicMX35: mx35pdk: add support for MMC
2012-09-10 Ashok Kumar... mx6qsabrelite:Use IMX_GPIO_NR Macro
2012-09-10 Stefano BabicMX: set a common place to share code for Freescale...
2012-09-10 Ashok Kumar... ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
2012-09-07 Stephen WarrenARM: tegra: fix Ventana standalone build
2012-09-07 Stephen WarrenARM: tegra: remove redundant mkdirs from board Makefiles
2012-09-07 Stephen Warrentegra: put eMMC environment into the boot sectors
2012-09-07 Stephen Warrenenv_mmc: allow environment to be in an eMMC partition
2012-09-07 Stephen Warrenmmc: detect boot sectors using EXT_CSD_BOOT_MULT too
2012-09-07 Thierry Redingtegra: Enable NAND on TEC
2012-09-07 Thierry Redingcmd_nand: dump: Align data and OOB buffers
2012-09-07 Stephen Warrentegra: enable NAND on Harmony
2012-09-07 Simon Glasstegra: Enable NAND on Seaboard
2012-09-07 Jim Lintegra: nand: Add Tegra NAND driver
2012-09-07 Simon Glasstegra: fdt: Add NAND definitions to fdt
2012-09-07 Simon Glasstegra: fdt: Add NAND controller binding and definitions
2012-09-07 Simon Glasstegra: Add NAND support to funcmux
2012-09-07 Simon Glassnand: Try to align the default buffers
2012-09-06 Benoît Thébaudeaumx31: Define default SoC input clock frequencies
2012-09-06 Marek VasutMX28: MMC: Avoid DMA DCache race condition
2012-09-06 Marek VasutMX28: SPI: Fix the DMA chaining
2012-09-06 Marek VasutMX28: SPI: Fix the DMA DCache race condition
2012-09-06 Benoît ThébaudeauFix mx31_decode_pll
2012-09-06 Benoît Thébaudeaumx35 timer: Switch to 32-kHz source
2012-09-06 Benoît Thébaudeaumx35: Define default SoC input clock frequencies
2012-09-06 Benoît Thébaudeaumx25: Define default SoC input clock frequencies
2012-09-06 Benoît Thébaudeaumx35: Fix clock dividers
2012-09-06 Benoît Thébaudeaumx35: Add definitions for clock gate values
2012-09-06 Benoît Thébaudeaumx35: Fix decode_pll
2012-09-05 Albert ARIBAUDMerge remote-tracking branch 'u-boot-ti/master' into m
2012-09-05 Tom Riniam33xx: Remove redundant timer config
2012-09-05 Stefano BabicOMAP3: mt_ventoux: added video support
2012-09-05 Stefano BabicOMAP3: video: add macros to set display parameters
2012-09-05 Stefano Babicvideo: drop duplicate set of DISPC_CONFIG register
2012-09-05 Stefano BabicOMAP3: mt_ventoux: disable the buzzer at start-up
2012-09-05 Stefano BabicOMAP3: mt_ventoux: read MAC address from EEPROM
2012-09-05 Stefano BabicOMAP3: mt_ventoux: activate GPIO4
2012-09-05 Stefano BabicOMAP3: mt_ventoux: Correct board pinmux
2012-09-05 Stefano BabicOMAP3: twister : get MAC address from EEPROM
2012-09-05 Stefano BabicOMAP3: tam3517: add function to read MAC from EEPROM
2012-09-05 Arnout Vandecappelle... OMAP3: add definition of CTRL_WKUP_CTRL register
2012-09-04 Albert ARIBAUDMerge remote-tracking branch 'u-boot-atmel/master'...
2012-09-04 Markus HubigFixes the crippled console output on PortuxG20.
2012-09-04 Markus Hubigarm: Adds board_postclk_init to the init_sequence.
2012-09-04 Jens Scharsigatmel: eb_cpux9k2: add ram target configuration
2012-09-04 Linus Walleijintegrator: break out common config
2012-09-04 Matt Sealeyefikamx: refine USB support
2012-09-04 Marek VasutSCSPS1: Enable caches
2012-09-04 Fabio Estevammx28evk: Add USB Ethernet support
2012-09-04 Marek VasutMX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
2012-09-04 Marek VasutMX28: Cleanup mxsboot within make mrproper
2012-09-04 Marek VasutM28: Fix the use of gpmi-nand in mtdparts
2012-09-04 Fabio Estevammx28evk: Convert to mxs_adjust_memory_params()
2012-09-04 Otavio SalvadorMX28: mx28evk: Enable SPI DMA
2012-09-04 Otavio SalvadorMX28: mx28evk: Align SSP clock speed
2012-09-03 Jens Scharsigeb_cpux9k2: fix chip select
2012-09-03 Michael Wallelsxl: support power switch
2012-09-03 Karl O. Pinccosmetic: Better explain how to use the kirkwood kwbima...
2012-09-03 Karl O. PincCosmetic doc typo fixes to the kwbimage feature docs
2012-09-03 Holger Brunckarm/km: remove unused code
2012-09-03 Valentin Longchamparm/km: fix frequency of the SPI NOR Flash
2012-09-03 Valentin Longchampkm/ivm: fix string len check to support 7 char board...
2012-09-03 Valentin Longchampkw_spi: fix clock prescaler computation
2012-09-03 Valentin Longchampkm/arm: set SPI NOR Flash default parameters
2012-09-03 Albert ARIBAUDedminiv2: orion5x: fix GPIO inits and values
2012-09-01 Wolfgang DenkMerge branch 'agust@denx.de' of git://git.denx.de/u...
2012-09-01 Wu, Joshat91: 9x5: Enable PMECC for 5series ek board.
2012-09-01 Wu, Joshat91: 9x5: change SMC config timing that both works...
2012-09-01 Wu, Joshat91: atmel_nand: Update driver to support Programmable...
2012-09-01 Wu, Joshat91: atmel_nand: remove unused variables.
2012-09-01 Wu, Joshat91: atmel_nand: extract HWECC initialization code...
2012-09-01 Bo Shenatmel: at91sam9x5: add spi flash boot support
2012-09-01 Bo Shenarm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
2012-09-01 Andreas Bießmannarm:at91-boards: remove console_init_f where unnecessary
2012-09-01 Andreas Bießmannat91sam9263ek: remove unnecessary console_init_f
2012-09-01 Bo Shenspi: atmel: add WDRBT bit to avoid receive overrun
2012-09-01 Bo Shenatmel: at91sam9x5: fix name error for spi
2012-09-01 Bo ShenTake over the maintainer for sam9g10 and sam9m10g45
2012-09-01 Bo Shenarm : at91sam9x5 : fix a small bug for NAND
2012-09-01 Xu, HongAT91: Small fix on AT91 USART initialization code
next