platform/kernel/linux-amlogic.git
2018-03-07 Xing Wangaudio: auge: pdm supports 96k sample rate
2018-03-07 Yi Zengmtd: add a new slc nand and avoid the 2nd column in...
2018-03-06 Yalong Liudrm: fix g12a buildoot dts
2018-03-06 jianxin.pandefconfig: generate defconfig with savedefconfig
2018-03-06 Hong GuoCPUFREQ: fix cpufreq system halt for reboot.
2018-03-06 Qiufang Daiclk: fix g12a pll enable ops mutex in in_atomic
2018-03-06 kele baidi: fix post write crash for pps enabled in post
2018-03-06 Nanxin Qinmedia: adds the register ops for media codec io efuse...
2018-03-06 zhilei.wudv: enable dv efuse for g12a
2018-03-06 Colin Crosshardlockup: detect hard lockups without NMIs using...
2018-03-06 Zongdong Jiaohdmitx: optimise the clock divider
2018-03-06 pengcheng chenosd: remove useless log print
2018-03-06 Evoke Zhanglcd: support two clk_path for g12a
2018-03-06 Long YuPD#156734: emmc: refixed core phase value for emmc...
2018-03-06 Evoke Zhangvout: update viu config when change display mode
2018-03-06 Evoke Zhangvpu: add viu2 vpu_clk_gate control
2018-03-06 pengcheng chenosd: add viu2 support for g12a
2018-03-06 Jian Huarm64: dts: add i2c alias aliases node
2018-03-06 MingLiang Dongamvecm: gamma init enable
2018-03-06 Evoke Zhangclktree: enable dsi_meas clktree
2018-03-06 Sam WufactoryBurn: efuse: keyman support efuse user space
2018-03-06 Jiacheng Meiencoder: add encoder for G12A
2018-03-05 kele baidi: turn on cont wr interrupt, fine tune cue
2018-03-05 MingLiang Dongamvecm: optimize G12A hdr code
2018-03-05 Brian Zhuge2d: fix the vapb div and ge2d gate error
2018-03-05 zhilei.wuge2d: revised ge2d vapb clk for g12a
2018-03-05 Nanxin Qinmedia: drop g12a register defintion change
2018-03-05 tao zengmm: optimize for CMA allocate time
2018-03-05 Nian Jingcvbs: drop busy mdelay, also update register settings
2018-03-05 Xing Wangsound: minor fix make array data ready only, short...
2018-03-05 Dezhi KongSR: only disable sr for g12a default
2018-03-05 Xing Wangaudio: auge: pdm supports 64k sample rate
2018-03-05 zhilei.wudv: add dolby vision driver for g12a
2018-03-05 Qiufang Daidts: G12A: enable reboot and fix mhu playload base...
2018-03-05 qi duanUSB: set UTMI interface is 8bit for new phy
2018-03-05 Liang Yangnand: improve nfc clock
2018-03-05 Brian Zhuosd: fix the fifo ctrl setting error
2018-03-05 Evoke Zhanglcd: add mipi-dsi checking panel state support
2018-03-05 Yalong LiuDRM: add drm support for g12a
2018-03-05 Evoke Zhangvpu: update vpu_clk_gate control for g12a
2018-03-05 weiming.liubl_extern: add lp8556 driver
2018-03-05 kele baidi: fix MADI flicker for mem enable
2018-03-05 Xing Wangaudio: auge: fix audio locker, resample, tdm format...
2018-03-05 Brian Zhudisplay: power improvement for g12a
2018-03-05 Zongdong Jiaohdmitx: bringup for g12a
2018-03-05 weiming.liulcd: add mipi_dsi cmd debug interface
2018-03-05 Jiyu Yangdts: add 850M clk configure
2018-03-05 Bo Yangdtsi: meson-g12a: add pwm slave device node
2018-03-05 MingLiang Dongamvecm: optimize g12a hdr effect
2018-03-05 MingLiang Dongamvecm: fix dynamic switch output mode
2018-03-05 Brian Zhuvideo: add bypass cm interface and change afbc busrt
2018-03-05 Qiufang Daiclock: G12A: add 846M freq for pll table
2018-03-05 hong.guoCPUFREQ: fix cpufreq at low 1.2G.
2018-03-05 huan.biaothermal: G12A: bind cooldev dts.
2018-03-05 hong.guoCPUFREQ: add cpufreq 1.7G.
2018-03-05 Xing Wangaudio: dts: add audio efuse module support for g12a
2018-03-05 Zhuo Wangdts: g12a: ethernet: re-organize ethernet dts/dtsi
2018-03-05 Nanxin.Qindts: enable clocks of the media modules.
2018-03-05 MingLiang Dongamvecm: add hdr support for g12a
2018-03-05 Yue Wangusb: fix usb device rename bug for g12a
2018-03-05 Yue Wangusb: fix usb2 phy pll setting for g12a
2018-03-05 Yi Zhouhdmitx: bringup for g12a
2018-03-05 Brian Zhuosd: enable osd rdma and afbc function
2018-03-05 hong.guoCPUFREQ: delete cpufreq driver's log config.
2018-03-05 Dezhi Kongvdin: add reset patch && viu debug interface
2018-03-05 huan.biaothermal: G12A: update thermal driver
2018-03-05 huan.biaothermal: G12A: update thermal driver.
2018-03-05 huan.biaothermal: G12A: add tsensor and cooldev dts.
2018-03-05 Yonghui Yusdio: both pio&dma are supported for g12a
2018-03-05 huan.biaothermal: G12A: fix cpucore cooling devices driver.
2018-03-05 huan.biaothermal: G12A: tsensor and cooldev driver.
2018-03-05 Brian Zhuppmgr: enable for g12a
2018-03-05 Jiamin Maunifykey: add unifykey description in g12a_skt dts
2018-03-05 Yu Turemote out: add irblaster config for G12A
2018-03-05 weiming.liulcd: update pll parameter
2018-03-05 Qiufang Daiclock: G12A: add hevcf, spicc clock
2018-03-05 kuibao zhangBT: g12a_skt: initial host wake bt pin [1/1]
2018-03-05 Bo Yangi2c: meson: set clk div for fast mode
2018-03-05 hong.guoCPUFREQ: modify cpufreq dts.
2018-03-05 Yi Zhouhdmitx: bringup for g12a
2018-03-05 Evoke Zhangvout: add missed vout2_module macro definition protection
2018-03-05 Liang Yangnand: free controller when no nand inserted or error
2018-03-05 hong.guoCPUFREQ: add dvfs cpufreq and latency.
2018-03-05 Yi Zhouhdmitx: eliminate unnecessary print
2018-03-05 weiming.liulcd: add g12a support
2018-03-05 Bo Yangpwm: meson-g12a: fix pwm xtal
2018-03-05 Nanxin Qinmedia: fixed the issure of mpeg12 playback.
2018-03-05 Bo Yangdts: meson-g12a: update hmditx i2c pinctrl
2018-03-05 kele baidi: di post wr&vpp link disaply ok
2018-03-05 Sunny Luodts: g12a-skt: add touch device node
2018-03-05 Brian Zhuosd: make osd2 and osd3 work
2018-03-05 Jiyu Yangvideo: enable ionvideo
2018-03-05 Brian Zhuvideo: disable blend ctrl when video off
2018-03-05 Liang Yangnand: add clock for mtd nand driver
2018-03-05 hong.guoCPUFREQ: add cpufreq driver.
2018-03-05 Bo Yangdtsi: meson-g12a: add all pwm pinmux definitions
2018-03-05 Nanxin.Qinmedia: add the HEVC_DBLK_CFGE to hevc regs.
2018-03-05 Yixun Laneth: meson-g12a: add Ethernet driver support
2018-03-05 hongmin huacec: cec g12a bring up
2018-03-05 Zan Pengpcie: fix config spaces error
next