platform/kernel/u-boot.git
2020-10-29 Tom RiniMerge https://gitlab.denx.de/u-boot/custodians/u-boot...
2020-10-29 Tom RiniMerge tag 'xilinx-for-v2021.01-v2' of https://gitlab...
2020-10-29 Tom Riniconfigs: Resync with savedefconfig
2020-10-29 Andre PrzywaraMAINTAINERS, git-mailrc: Update sunxi maintainers
2020-10-29 Tom RiniMerge https://gitlab.denx.de/u-boot/custodians/u-boot...
2020-10-29 Shmuel Hazanmtd: nand: pxa3xx: enable NAND controller if the SoC...
2020-10-29 Michal Simekxilinx: Enable SPI driver for Versal
2020-10-29 Michal Simekxilinx: Consolidate board_fit_config_name_match() for...
2020-10-29 Ashok Reddy... mmc: zynq_sdhci: Add common function to set input/outpu...
2020-10-29 Ashok Reddy... mmc: zynq_sdhci: Extend UHS timings till hs200
2020-10-29 Baruch Siachmtd: pxa3xx_nand: remove dead code
2020-10-29 Shmuel Hazanmtd: pxa3xx_nand: port to use driver model
2020-10-29 Baruch Siacharm: dts: armada-cp110-master: update nand-controller
2020-10-29 Shmuel Hazanarm: dts: armada-cp110-slave: add missing cps_nand
2020-10-29 Stefan Roesearm: octeontx: Enable network support in supported...
2020-10-29 Igal Libermanphy: marvell: cp110: update mode parameter for pcie...
2020-10-29 Grzegorz Jaszczykphy: marvell: cp110: let the firmware configure comphy...
2020-10-29 Grzegorz Jaszczykphy: marvell: cp110: let the firmware configure the...
2020-10-28 Tom RiniPrepare v2021.01-rc1
2020-10-28 Tom RiniMerge branch '2020-10-28-mux-driver-framework'
2020-10-28 Pratyush Yadavtest: mux-cmd: Add tests for the 'mux' command
2020-10-28 Pratyush Yadavcmd: Add a mux command
2020-10-28 Jean-Jacques... test: Add tests for the multiplexer framework
2020-10-28 Pratyush YadavKconfig: Increase the pre-relocation memory
2020-10-28 Jean-Jacques... drivers: mux: mmio-based syscon mux controller
2020-10-28 Jean-Jacques... dm: board: complete the initialization of the muxes...
2020-10-28 Jean-Jacques... drivers: Add a new framework for multiplexer devices
2020-10-28 Tom RiniMerge tag 'efi-2021-01-rc2' of https://gitlab.denx...
2020-10-28 Tom RiniMerge branch '2020-10-27-further-log-enhancements'
2020-10-27 Heinrich Schuchardtlog: correct and check array size of log categories
2020-10-27 Heinrich Schuchardtefi_loader: daylight saving time
2020-10-27 Ilias Apalodimasefi_loader: Disable devices before handing over control
2020-10-27 Ilias Apalodimasefi_loader: Sort header file ordering
2020-10-27 Heinrich Schuchardttrace: conserve gd register on RISC-V
2020-10-27 Heinrich Schuchardtrtc: provide an emulated RTC
2020-10-27 Heinrich SchuchardtMakefile: provide constant with seconds since epoch
2020-10-27 Heinrich Schuchardttest: log: test message continuation
2020-10-27 Heinrich Schuchardtlog: allow for message continuation
2020-10-27 Heinrich Schuchardtlog: move processing_msg to global data
2020-10-27 Anatolij Gustschinnokia_rx51: re-enable CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV
2020-10-27 Ashok Reddy... mmc: zynq_sdhci: Add clock phase delays for Versal
2020-10-27 Ashok Reddy... mmc: zynq_sdhci: Set tapdelays based on clk phase delays
2020-10-27 Michal Simekmmc: zynq_sdhci: Read clock phase delays from dt
2020-10-27 Michal Simekmmc: zynq_sdhci: Move macro to the top
2020-10-27 Ashok Reddy... mmc: Define timing macro's
2020-10-27 Ashok Reddy... Revert "mmc: zynq: parse dt when probing"
2020-10-27 Ashok Reddy... spi: zynq_qspi: Add function description
2020-10-27 Michal Simekmtd: spi: Fix incorrect indentation
2020-10-27 Michal Simekmicroblaze: Enable board_late_init()
2020-10-27 Michal Simekmicroblaze: Wire generic xilinx board_late_init_xilinx()
2020-10-27 Michal Simekxilinx: Merge together BOOT_SCRIPT_OFFSET between MB...
2020-10-27 Michal Simekxilinx: Remove additional newline in config files
2020-10-27 Michal Simekxilinx: Enable SF_TEST command for all ARM based platforms
2020-10-27 Michal Simekxilinx: zynq: Enable AES command
2020-10-27 Michal Simekxilinx: zynq: Change types from u32 to uint32_t
2020-10-27 Michal Simekxilinx: Enable FRU command for all ARM based platforms
2020-10-27 T Karthik Reddyxilinx: Add DDR base address to bootscript address
2020-10-27 T Karthik Reddyarm64: zynqmp: Fix zynqmp mini qspi max frequency
2020-10-27 Michal Simekxilinx: zynqmp: Use tab for macro indentation
2020-10-27 Michal Simekxilinx: zynqmp: Do not check 0 as invalid return from...
2020-10-27 Michal Simekxilinx: zynqmp: Fix debug message in zynqmp_get_silicon...
2020-10-27 Michal Simekxilinx: zynqmp: Check return value from xilinx_pm_request()
2020-10-27 Michal Simekxilinx: board: Add FRU decoder support
2020-10-27 Michal Simekxilinx: cmd: Add basic fru format generator
2020-10-27 Siva Durga... xilinx: cmd: Add support for FRU commands
2020-10-27 Michal Simekxilinx: common: Add Makefile to common folder
2020-10-27 Michal Simekmicroblaze: Enable i2c DM by default
2020-10-27 Michal Simekxilinx: common: Protect board_late_init_xilinx()
2020-10-27 Michal Simekxilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board...
2020-10-27 Michal Simekspl: fdt: Record load/entry fit-images entries in 64bit...
2020-10-27 Michal Simekspl: Use standard FIT entries
2020-10-27 T Karthik Reddyspi: zynq_qspi: Use clk subsystem to get reference...
2020-10-27 T Karthik Reddyspi: zynq_spi: Use clk subsystem to get reference spi clk
2020-10-27 Michal Simekserial: pl01x: Add error value checking
2020-10-27 Michal Simekxilinx: board: Add support for additional card detection
2020-10-27 Michal Simekxilinx: board: Read the whole eeprom not just offset
2020-10-27 Michal Simekdm: core: Add support for getting node from aliases
2020-10-27 T Karthik Reddyspi: xilinx_spi: remove unused local variable
2020-10-27 Michal Simekdt-bindings: arm64: versal: Add clk and power headers
2020-10-27 Michal Simekarm64: zynqmp: Add support for saving sha3 key to diffe...
2020-10-27 T Karthik Reddyarm64: zynqmp: Add support for SHA3 command
2020-10-27 T Karthik Reddyarm64: zynqmp: Add support for RSA command
2020-10-27 Siva Durga... arm64: zynqmp: Add support for encryption and decryptio...
2020-10-27 Michal Simekarm64: zynqmp: Get rid of iommus/power-domains properti...
2020-10-27 Michal Simekarm64: zynqmp: Enable cache command
2020-10-27 Michal Simekarm64: zynqmp: Enable FPGA loading from SPL
2020-10-27 Michal Simekarm64: zynqmp: Get rid of simple_itoa and replace it...
2020-10-27 Michal Simekmailbox: zynqmp: Extend timeout for getting observation bit
2020-10-27 Michal Simekfirmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD...
2020-10-27 Ashok Reddy... config: versal: Update mini u-boot timer clock to 100Mhz
2020-10-27 Ashok Reddy... arm64: versal: Update mini u-boot eMMC node parameters
2020-10-27 T Karthik Reddymicroblaze: Add support for distro boot
2020-10-27 T Karthik Reddymicroblaze: Setup distro boot env variables at run...
2020-10-27 T Karthik Reddymicroblaze: board: Check return value whlie saving...
2020-10-27 T Karthik Reddymicroblaze: trivial code fixes
2020-10-27 T Karthik Reddymicroblaze: Enable spi for microblaze
2020-10-27 Michal Simekspi: xilinx_spi: Remove unused variable
2020-10-27 Michal Simekarm64: zynqmp: Enable EMMC boot
2020-10-27 Michal Simekarm64: zynqmp: Add missing support for 9cg version
2020-10-27 Alexandre GRIVEAUXARM: zynq: Add Z-turn board V5
next