platform/kernel/linux-starfive.git
2016-03-10 Jes Sorensenrtl8xxxu: Set the correct thermal meter register for...
2016-03-10 Jes Sorensenrtl8xxxu: Set 8723bu MCS TX power
2016-03-10 Jes Sorensenrtl8xxxu: Set 8723bu TX power for CCK and OFDM rates
2016-03-10 Jes Sorensenrtl8xxxu: Parse efuse power indices for 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Bump TX power arrays to handle larger channel...
2016-03-10 Jes Sorensenrtl8xxxu: Use size of source pointer when copying efuse...
2016-03-10 Jes Sorensenrtl8xxxu: Introduce set_tx_power() fileop and a new...
2016-03-10 Jes Sorensenrtl8xxxu: Correct struct rtl8723bu_efuse to list power...
2016-03-10 Jes Sorensenrtl8xxxu: Do not use hard-wired RF enable settings...
2016-03-10 Jes Sorensenrtl8xxxu: Setup coex table correctly (hopefully)
2016-03-10 Jes Sorensenrtl8xxxu: Use REG_RFE_CTRL_ANTA_SRC rather than hard...
2016-03-10 Jes Sorensenrtl8xxxu: Use name for REG_RFE_BUFFER rather than hard...
2016-03-10 Jes Sorensenrtl8xxxu: 8723bu: REG_BT_COEX_TABLE4 is only 8 bits
2016-03-10 Jes Sorensenrtl8xxxu: Set WLAN_ACT_CONTROL per vendor driver setting
2016-03-10 Jes Sorensenrtl8xxxu: RF_T_METER is different on the newer chips
2016-03-10 Jes Sorensenrtl8xxxu: Implement init_statistics for 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Add missing blank space in front of bracket
2016-03-10 Jes Sorensenrtl8xxxu: Setup RX aggregation
2016-03-10 Jes Sorensenrtl8xxxu: Group chip quirks together
2016-03-10 Jes Sorensenrtl8xxxu: Add REG_DWBCN1_CTRL_8723B define
2016-03-10 Jes Sorensenrtl8xxxu: 8723bu lock phy after RF init
2016-03-10 Jes Sorensenrtl8xxxu: Call device specific _config_channel()
2016-03-10 Jes Sorensenrtl8xxxu: Initialize burst parameters for 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Set RX boundary for 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Do not set FPGA0_TX_INFO for 8723bu and use...
2016-03-10 Jes Sorensenrtl8xxxu: Do queue init in same order as 8723bu vendor...
2016-03-10 Jes Sorensenrtl8xxxu: 80M spur hack is for 8723au only
2016-03-10 Jes Sorensenrtl8xxxu: Init H2C command register for 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Another 8723bu magic register set during...
2016-03-10 Jes Sorensenrtl8xxxu: Another 8723bu patch for rtl8xxxu_init_phy_bb()
2016-03-10 Jes Sorensenrtl8xxxu: Handle XTAL_K value in efuse specific location
2016-03-10 Jes Sorensenrtl8xxxu: Additional fixes for 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Setup LLT before downloading firmware
2016-03-10 Jes Sorensenrtl8xxxu: Implement 8723bu power on sequence
2016-03-10 Jes Sorensenrtl8xxxu: Do not set REG_AFE_XTAL_CTRL on 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Issue BT_INFO command
2016-03-10 Jes Sorensenrtl8xxxu: Handle BT register writes and MP_OPER events
2016-03-10 Jes Sorensenrtl8xxxu: Initial functionality to handle C2H events...
2016-03-10 Jes Sorensenrtl8xxxu: Handle 8723bu style rx descriptors
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8723bu (nextgen) rx descriptor definition
2016-03-10 Jes Sorensenrtl8xxxu: Set the right type for ps tdma on 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Do not ignore wlan activity on 8723bu
2016-03-10 Jes Sorensenrtl8xxxu: Improve 8723bu init code
2016-03-10 Jes Sorensenrtl8xxxu: Remove unused variable
2016-03-10 Jes Sorensenrtl8xxxu: Initial rtl8723bu_init_bt() code
2016-03-10 Jes Sorensenrtl8xxxu: Initial implementation of rtl8723bu_config_ch...
2016-03-10 Jakub Sitnickirtl8xxxu: rtl8192eu: Map out EFUSE TX power area
2016-03-10 Jes Sorensenrtl8xxxu: Remove backing up certain registers, which...
2016-03-10 Jes Sorensenrtl8xxxu: Do LC calibration before IQK calibration
2016-03-10 Jes Sorensenrtl8xxxu: Handle S0S1 register in lc_calibrate()
2016-03-10 Jes Sorensenrtl8xxxu: First stab at adding IQK calibration for...
2016-03-10 Jes Sorensenrtl8xxxu: Add a couple of new register definitions
2016-03-10 Jes Sorensenrtl8xxxu: Make rtl8xxxu_add_path_on() use device specif...
2016-03-10 Jes Sorensenrtl8xxxu: Use correct formatting type to print sizeof()
2016-03-10 Jes Sorensenrtl8xxxu: Do not overwrite rtl8xxxu_debug for untested...
2016-03-10 Jes Sorensenrtl8xxxu: Do BT_WLAN_CALIBRATION before doing IQK calib...
2016-03-10 Jes Sorensenrtl8xxxu: rtl8xxxu_h2c_cmd(): Add size argument
2016-03-10 Jes Sorensenrtl8xxxu: rtl8723bu_parse_efuse(): Use a pointer to...
2016-03-10 Jes Sorensenrtl8xxxu: rtl8192eu_parse_efuse(): Use a pointer to...
2016-03-10 Jakub Sitnickirtl8xxxu: rtl8192cu: Introduce a pointer to efuse
2016-03-10 Jakub Sitnickirtl8xxxu: rtl8723au: Introduce a pointer to efuse
2016-03-10 Jakub Sitnickirtl8xxxu: Skip disabled efuse words early
2016-03-10 Jakub Sitnickirtl8xxxu: Don't check for illegal offset when reading...
2016-03-10 Jes Sorensenrtl8xxxu: Add definitions for new generation h2c commands
2016-03-10 Jes Sorensenrtl8xxxu: Group USB fixups together for all chips
2016-03-10 Jes Sorensenrtl8xxxu: Add some missing register definitions for...
2016-03-10 Jes Sorensenrtl8xxxu: Handle 32 bit mailbox extension regs found...
2016-03-10 Jes Sorensenrtl8xxxu: Add 8723by AGC table
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8723b_mac_init_table
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8723bu_phy_init_antenna_selection()
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8723bu_radioa_1t_init_table
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8723b_phy_1t_init_table
2016-03-10 Jes Sorensenrtl8xxxu: Only setup USB interrupts for parts which...
2016-03-10 Jes Sorensenrtl8xxxu: Use 1024 byte writes for writing 8723bu firmware
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8723bu_parse_efuse() and 8723bu efuse...
2016-03-10 Jes Sorensenrtl8xxxu: Initial rtl8723bu chip identification
2016-03-10 Jes Sorensenrtl8xxxu: Init REG_HIMR[01] for 8192eu parts
2016-03-10 Jes Sorensenrtl8xxxu: Kludge to drop incorrect USB OUT EP for 8192EU
2016-03-10 Jes Sorensenrtl8xxxu: Fix incorrect test for auto LLT failure
2016-03-10 Jes Sorensenrtl8xxxu: Init the LLT after we start the firmware
2016-03-10 Jes Sorensenrtl8xxxu: Init page boundaries before starting the...
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8xxxu_auto_llt_table()
2016-03-10 Jes Sorensenrtl8xxxu: Implment rtl8192eu_power_on()
2016-03-10 Jes Sorensenrtl8xxxu: Add rtl8192eu_nic.bin to the MODULE_FIRMWARE...
2016-03-10 Jes Sorensenrtl8xxxu: Use 1024 byte block loads for 8192eu firmware
2016-03-10 Jes Sorensenrtl8xxxu: Identify chip vendors correctly
2016-03-10 Jes Sorensenrtl8xxxu: Add initial code to parse rtl8192eu efuse
2016-03-10 Eliad Pellerwlcore/wl18xx: add radar_debug_mode handling
2016-03-10 Eliad Pellerwlcore: don't WARN_ON in case of existing ROC
2016-03-10 Amitkumar Karwarmwifiex: Empty Tx queue during suspend
2016-03-10 Hui Wangbrcmfmac: Remove waitqueue_active check
2016-03-10 Dan Carpenterlibertas: fix an error code in probe
2016-03-10 Kalle ValoMerge tag 'iwlwifi-next-for-kalle-2016-03-09_2' of...
2016-03-09 Ayala Bekeriwlwifi: mvm: update GSCAN capabilities
2016-03-09 Johannes Bergiwlwifi: mvm: don't try to offload AES-CMAC in AP/IBSS...
2016-03-09 Emmanuel Grumbachiwlwifi: mvm: adapt the firmware assert log to new...
2016-03-09 Gregory Greenmaniwlwifi: pcie: avoid restocks inside rx loop if not...
2016-03-09 Chaya Rachel... iwlwifi: mvm: return the cooling state index instead...
2016-03-09 Emmanuel Grumbachiwlwifi: mvm: remove RRM advertisement
2016-03-09 Emmanuel Grumbachiwlwifi: mvm: don't let NDPs mess the packet tracking
next