platform/kernel/u-boot.git
2012-05-15 Fabio Estevammx53loco: Remove unneeded gpio_set_value()
2012-05-15 Fabio Estevammx53loco: Add CONFIG_REVISION_TAG
2012-05-15 Fabio Estevammx53loco: Turn on VUSB regulator
2012-05-15 Fabio Estevammx53loco: Add mc34708 support and set mx53 frequency...
2012-05-15 Fabio Estevampmic: dialog: Avoid name conflicts
2012-05-15 Timo Ketolaimx: Add u-boot.imx as target for ARM9 i.MX SOCs
2012-05-15 Timo Ketolai.MX2: Include asm/types.h in arch-mx25/imx-regs.h
2012-05-15 Timo Ketolaimx: usb: There is no such register
2012-05-15 Timo Ketolai.MX25: usb: Set PORTSCx register
2012-05-15 Timo Ketolaimx: nand: Support flash based BBT
2012-05-15 Timo Ketolai.MX25: This architecture has a GPIO4 too
2012-05-15 Timo Ketolai.MX25: esdhc: Add mxc_get_clock infrastructure
2012-05-15 Eric Nelsoni.MX6: mx6q_sabrelite: add SATA bindings
2012-05-15 Eric Nelsoni.MX6: add enable_sata_clock()
2012-05-15 Dirk Behmei.MX6: Add ANATOP regulator init
2012-05-15 Lauri Hintsalamx28evk: add NAND support
2012-05-15 Wolfgang GrandeggerUSB: ehci-mx6: Fix broken IO access
2012-05-15 Marek VasutM28: Scan only first 512 MB of DRAM to avoid memory...
2012-05-15 Marek VasutRevert "i.MX28: Enable additional DRAM address bits"
2012-05-15 Marek VasutM28: Enable FDT support
2012-05-15 Fabio Estevammx53loco: Add support for 1GHz operation for DA9053...
2012-05-15 Fabio Estevammx53loco: Allow to print CPU information at a later...
2012-05-15 Fabio Estevammx5: Add clock config interface
2012-05-15 Fabio Estevamimx-common: Factor out get_ahb_clk()
2012-05-15 Eric Nelsoni.MX6Q: mx6qsabrelite: Add keypress support to alter...
2012-05-15 Fabio Estevammx31pdk: Allow booting a zImage kernel
2012-05-15 Fabio Estevammx6qarm2: Allow booting a zImage kernel
2012-05-15 Fabio Estevammx6qsabrelite: Allow booting a zImage kernel
2012-05-15 Fabio Estevammx28evk: Allow booting a zImage kernel
2012-05-15 Fabio Estevamm28evk: Allow to booting a dt kernel
2012-05-15 Fabio Estevammx28evk: Allow to booting a dt kernel
2012-05-15 Fabio Estevammx6qsabrelite: No need to set the direction for GPIO3_2...
2012-05-15 Fabio Estevampmic: Add support for the Dialog DA9053 PMIC
2012-05-15 Stefano BabicMX53: mx53loco: Add SATA support
2012-05-15 Stefano BabicMX53: Add support to ESG ima3 board
2012-05-15 Stefano BabicSATA: add driver for MX5 / MX6 SOCs
2012-05-15 Stefano BabicMX53: add function to set SATA clock to internal
2012-05-15 Stefano BabicSATA: check for return value from sata functions
2012-05-15 Stefano BabicMX5: Add definitions for SATA controller
2012-05-15 Stefano BabicNET: fec_mxc.c: Add a way to disable auto negotiation
2012-05-15 Stefano BabicDefine UART4 and UART5 base addresses
2012-05-15 Donghwa LeeEXYNOS: Change bits per pixel value proper for u-boot.
2012-05-15 Donghwa LeeEXYNOS: support TRATS board display function
2012-05-15 Donghwa LeeLCD: support S6E8AX0 amoled driver based on EXYNOS...
2012-05-15 Donghwa LeeEXYNOS: support EXYNOS MIPI DSI interface driver.
2012-05-15 Donghwa LeeEXYNOS: support EXYNOS framebuffer and FIMD display...
2012-05-15 Donghwa LeeLCD: add data structure for EXYNOS display driver
2012-05-15 Donghwa LeeEXYNOS: add LCD and MIPI DSI clock interface.
2012-05-15 Donghwa LeeEXYNOS: definitions of system resgister and power manag...
2012-05-15 Minkyu KangSMDK5250: fix compiler warning
2012-05-15 Łukasz Majewskimisc:pmic:samsung Convert TRATS target to use MAX8997...
2012-05-15 Łukasz Majewskimisc:pmic:max8997 MAX8997 support for PMIC driver
2012-05-15 Jaehoon ChungTRATS: modify the trats's configuration
2012-05-15 Łukasz MajewskiARM: Exynos4: ADC: Universal_C210: Enable LDO4 power...
2012-05-15 Chander KashyapEXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
2012-05-15 Nobuhiro Iwamatsuarm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_...
2012-05-15 Nobuhiro Iwamatsuarm: cam_enc_4xx: Change macro from BOARD_LATE_INIT...
2012-05-15 Nikita Kiryanovcm-t35: add I2C multi-bus support
2012-05-15 Tom Riniinclude/configs: Remove CONFIG_SYS_64BIT_STRTOUL
2012-05-15 Tom Riniinclude/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
2012-05-15 Tom Riniomap3: Introduce weak misc_init_r
2012-05-15 Tom Riniomap730p2: Remove empty misc_init_r
2012-05-15 Tom Riniomap5912osk: Remove empty misc_init_r
2012-05-15 Tom Riniomap4+: Remove CONFIG_ARCH_CPU_INIT
2012-05-15 Tom Riniomap4: Remove CONFIG_SYS_MMC_SET_DEV
2012-05-15 Grazvydas IgnotasOMAP3: pandora: drop console kernel argument
2012-05-15 Grazvydas IgnotasOMAP3: pandora: revise GPIO configuration
2012-05-15 Grazvydas IgnotasOMAP3: pandora: pin mux updates for DM3730 board variant
2012-05-15 Tom RiniMakefile: Add a 'checkthumb' rule
2012-05-15 Tom Rinitools, config.mk: Add gcc-version.sh, cc-version test...
2012-05-15 Aneesh VOMAP4: enable Thumb build
2012-05-15 Aneesh Vomap4+: Avoid using __attribute__ ((__packed__))
2012-05-15 Aneesh Varmv7: Use -march=armv7-a and thereby enable Thumb-2
2012-05-15 Aneesh VARM: enable Thumb build
2012-05-15 Aneesh Varmv7: add appropriate headers for assembly functions
2012-05-15 Aneesh Varm: adapt asm/linkage.h from Linux
2012-05-15 SRICHARAN ROMAP5: reset: Use cold reset in case of 5430ES1.0
2012-05-15 SRICHARAN ROMAP3+: reset: Create a common reset layer.
2012-05-15 Balaji T Kmmc: omap5evm: Add eMMC saveenv support
2012-05-15 Balaji T Komap5: pbias ldo9 turn on
2012-05-15 SRICHARAN Rpower: twl6035: add palmas PMIC support
2012-05-15 Balaji T Karm: omap5: correct boot device mode7 for eMMC
2012-05-15 SRICHARAN ROMAP4/5: emif: Correct the emif power mgt shadow regist...
2012-05-15 SRICHARAN ROMAP5: ddr: Change the ddr device name.
2012-05-15 SRICHARAN ROMAP5: defconfig: Align the defconfig for 5430 ES1.0
2012-05-15 SRICHARAN ROMAP4/5: device: Add support to get the device type.
2012-05-15 SRICHARAN ROMAP4/5: Make the sysctrl structure common
2012-05-15 SRICHARAN ROMAP5: SRAM: Change the SRAM base address.
2012-05-15 SRICHARAN ROMAP4/5: Make the silicon revision variable common.
2012-05-15 SRICHARAN ROMAP5: hwinit: Add the missing break statement
2012-05-15 SRICHARAN ROMAP5: palmas: Configure nominal opp vdd values
2012-05-15 SRICHARAN ROMAP5: emif/ddr: Change emif settings as required for...
2012-05-15 SRICHARAN ROMAP5: io: Configure the io settings for omap5430 sevm...
2012-05-15 SRICHARAN ROMAP5: board: Add pinmux data for omap5_evm board.
2012-05-15 SRICHARAN ROMAP5: clocks: Change clock settings as required for...
2012-05-15 Enric Balletbò... OMAP3: igep00x0: Reduce lines of code for IGEP-based...
2012-05-15 Nishanth MenonOMAP4: scale voltage of core before MPU scales
2012-05-15 Nishanth MenonOMAP4460: TPS Ensure SET1 is selected after voltage...
2012-05-15 Nishanth MenonOMAP3+: Introduce generic logic for OMAP voltage controller
2012-05-15 Jonathan SolnitARM:OMAP+:MMC: Add parameters to MMC init
next