platform/kernel/linux-rpi.git
2020-07-01 Andrey Konovalovmedia: i2c: imx290: set bus_type before calling v4l2_fw...
2020-07-01 Manivannan... media: i2c: imx290: Move the settle time delay out...
2020-07-01 Manivannan... media: i2c: imx290: Add support to enumerate all frame...
2020-07-01 Manivannan... media: i2c: imx290: Add RAW12 mode support
2020-07-01 Manivannan... media: i2c: imx290: Add support for test pattern generation
2020-07-01 Manivannan... media: i2c: imx290: Add configurable link frequency...
2020-07-01 Manivannan... media: i2c: imx290: Add support for 2 data lanes
2020-07-01 Andrey Konovalovmedia: i2c: imx290: fix reset GPIO pin handling
2020-07-01 Andrey Konovalovmedia: i2c: imx290: fix the order of the args in SET_RU...
2020-07-01 Andrey Konovalovmedia: i2c: imx290: set the format before VIDIOC_SUBDEV...
2020-07-01 Manivannan... media: i2c: Add IMX290 CMOS image sensor driver
2020-07-01 Manivannan... media: dt-bindings: media: i2c: Add IMX290 CMOS sensor...
2020-07-01 Dave Stevensonmedia: bcm2835-unicam: Avoid gcc warning over {0} on...
2020-07-01 Dave Stevensondt/dtoverlays: Fix up base DT and overlays for updated...
2020-07-01 David Plowmanmedia: bcm2835-unicam: change minimum number of vb2_que...
2020-07-01 Dave Stevensonmedia: bcm2835-unicam: Retain packing information on...
2020-07-01 Dave Stevensonmedia: bcm2835-unicam: Fixup review comments from Hans.
2020-07-01 Jacko Dirksmedia: bcm2835: unicam: Fix uninitialized warning
2020-07-01 Dave Stevensonmedia: bcm2835-unicam: Always service interrupts
2020-07-01 Dave Stevensonmedia: bcm2835-unicam: Add support for get_mbus_config...
2020-07-01 Naushir Patuckmedia: bcm2835-unicam: Driver for CCP2/CSI2 camera...
2020-07-01 Dave Stevensoninclude: media: Add vfl_devnode_type of VFL_TYPE_VIDEO
2020-07-01 Dave Stevensondrivers: media: Remove the downstream version of bcm283...
2020-07-01 Jacopo Mondimedia: rcar-csi2: Negotiate data lanes number
2020-07-01 Jacopo Mondimedia: i2c: adv748x: Implement get_mbus_config
2020-07-01 Jacopo Mondimedia: i2c: adv748x: Adjust TXA data lanes number
2020-07-01 Jacopo Mondistaging: media: imx: Update TODO entry
2020-07-01 Jacopo Mondimedia: v4l2-subdev: Remove [s|g]_mbus_config video ops
2020-07-01 Jacopo Mondimedia: pxa_camera: Use the new set_mbus_config op
2020-07-01 Jacopo Mondimedia: i2c: ov6650: Use new [get|set]_mbus_config ops
2020-07-01 Jacopo Mondimedia: i2c: Use the new get_mbus_config pad op
2020-07-01 Jacopo Mondimedia: v4l2-subdev: Introduce [get|set]_mbus_config...
2020-07-01 Phil Elwellbrcmfmac: Prefer a ccode from OTP over nvram file
2020-07-01 Maxim Mikityanskiystaging: bcm2835-audio: Add missing MODULE_ALIAS
2020-07-01 Markus Proellermedia: irs1125: Keep HW in sync after imager reset
2020-07-01 Markus Proellermedia: irs1125: Atomic access to imager reconfiguration
2020-07-01 Markus Proellermedia: irs1125: Refactoring and debug messages
2020-07-01 Markus Proellermedia: irs1125: Using i2c_transfer for ic2 reads
2020-07-01 Phil ElwellRevert "spi: spi-bcm2835: Re-enable HW CS"
2020-07-01 Phil ElwellRevert "spi: spi-bcm2835: Disable forced software CS"
2020-07-01 Phil ElwellRevert "SQUASH: Fix spi driver compiler warnings"
2020-07-01 Phil ElwellARM: dts: Set brcm,enable-l1ss for CM4
2020-07-01 Phil ElwellPCI: brcmstb: Add DT property to control L1SS
2020-07-01 Phil ElwellARM: dts: Add bcm2711-rpi-cm4.dts
2020-07-01 Phil ElwellSQUASH: dts: Fix firmware clocks support
2020-07-01 Maxime Ripardclk: rpi: Fix compatible indentation
2020-07-01 Maxime Ripardclk: rpi: Only register a few firmware clocks
2020-07-01 Maxime Ripardclk: bcm: rpi: Remove the quirks for the CPU clock
2020-07-01 Maxime Ripardclk: bcm: rpi: Give firmware clocks a name
2020-07-01 Maxime Ripardclk: bcm: rpi: Use CCF boundaries instead of rolling...
2020-07-01 Maxime Ripardclk: bcm: rpi: Add an enum for the firmware clocks
2020-07-01 Maxime Ripardclk: rpi: Adjust DT binding to match upstream
2020-07-01 Nicolas Saenz... PCI: brcmstb: Assert fundamental reset on initialization
2020-07-01 Colin Ian Kingw1_therm: remove redundant assignments to variable ret
2020-07-01 Dan Carpenterw1_therm: Free the correct variable
2020-07-01 Akira Shimaharaw1_therm: adding bulk read support to trigger multiple...
2020-07-01 Akira Shimaharaw1_therm: adding alarm sysfs entry
2020-07-01 Akira Shimaharaw1_therm: optimizing temperature read timings
2020-07-01 Akira Shimaharaw1_therm: adding eeprom sysfs entry
2020-07-01 Akira Shimaharaw1_therm: adding resolution sysfs entry
2020-07-01 Akira Shimaharaw1_therm: adding ext_power sysfs entry
2020-07-01 Akira Shimaharaw1_therm: fix reset_select_slave during discovery
2020-07-01 Akira Shimaharaw1_therm: adding code comments and code reordering
2020-07-01 Phil Elwelloverlays: Update upstream overlays after vc4-kms-v3d...
2020-07-01 Phil Elwelloverlays: i2c-gpio: Avoid open-drain warnings
2020-07-01 Phil ElwellRevert "overlays: gpio-keys: Avoid open-drain warnings"
2020-07-01 Hristo Venevsnd_bcm2835: disable HDMI audio when vc4 is used (...
2020-07-01 Dom Cobleyvc4: cec: Restore cec physical address on reconnect
2020-07-01 Phil Elwellstaging: vchiq_arm: Use g_dma_dev for dma_unmap_sg
2020-07-01 Dom Cobleyvc4: Set driver_name for card
2020-07-01 Phil Elwellconfigs: Add SND_SOC_MAX98357A=m
2020-07-01 Kevin P. FlemingAdd Micro Crystal RV-1805 to i2c-rtc overlays
2020-07-01 David Plowmanmedia: bcm2835-isp: fix bytes per line calculations...
2020-07-01 Phil Elwelloverlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param
2020-07-01 David Lechnernet: rtl8192cu: fix gcc misleading whitespace warning
2020-07-01 bjornoverlays: Add spi0 overlay to support sc16is752
2020-07-01 Pali Rohároverlays: gpio-shutdown: Add information for Raspberry...
2020-07-01 Pali Rohároverlays: gpio-shutdown: Add information for SysV init...
2020-07-01 Phil Elwelloverlays: i2c-rtc: Fix trickle-resistor-ohms param
2020-07-01 Phil Elwellbrcmfmac: BCM43436 needs dedicated firmware
2020-07-01 Chen-Yu Tsaiconfigs: Build HWMON core into kernel
2020-07-01 Chen-Yu Tsaiconfigs: Switch to upstream thermal sensor for RPi...
2020-07-01 Chen-Yu TsaiARM: dts: bcm2711-rpi: Remove downstream thermal sensor...
2020-07-01 Chen-Yu TsaiRevert "thermal: brcmstb_thermal: Add BCM2838 support"
2020-07-01 Chen-Yu TsaiRevert "thermal: brcmstb_thermal: Correct SoC name"
2020-07-01 Stefan WahrenARM: configs: Build BCM2711 thermal as module
2020-07-01 Stefan WahrenARM: dts: bcm2711: Enable thermal
2020-07-01 Stefan Wahrenthermal: Add BCM2711 thermal driver
2020-07-01 Stefan Wahrendt-bindings: Add Broadcom AVS RO thermal
2020-07-01 David Plowmanmedia: bcm2835-unicam: change minimum number of vb2_que...
2020-07-01 Phil ElwellRevert "zswap: Uncross module parameter setting functions"
2020-07-01 Phil ElwellARM: dts: Update for new VCHIQ BCM2711 DMA support
2020-07-01 Phil Elwellstaging: vchiq_arm: Clean up 40-bit DMA support
2020-07-01 Naushir Patuckmedia: i2c: imx477: Return correct result on sensor...
2020-07-01 Dave Stevensondrm/vc4: Add FKMS as an acceptable node for dma ranges.
2020-07-01 Dave Stevensondrm/vc4: Adopt the dma configuration from the HVS or...
2020-07-01 Phil Elwellconfigs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m
2020-07-01 Phil Elwellzswap: Defer zswap initialisation
2020-07-01 Phil Elwellzswap: Uncross module parameter setting functions
2020-07-01 Dave Stevensonmedia: bcm2835-unicam: Retain packing information on...
next