platform/kernel/u-boot.git
2012-09-01 Allen Martinspl: fix SPL build of private libgcc
2012-09-01 Allen Martinarm: enable libgcc build for SPL
2012-09-01 Allen Martintegra20: enable SPL for tegra20 boards
2012-09-01 Allen Martintegra20: move SDRAM param save to later in boot
2012-09-01 Allen Martintegra20: add u-boot-*-tegra.bin targets
2012-09-01 Allen MartinARM: add tegra20 support to arm720t
2012-09-01 Allen Martintegra20: remove timer_init from SPL build
2012-09-01 Allen MartinARM: Fix arm720t SPL build
2012-09-01 Allen MartinMAKEALL: update to work with new boards.cfg syntax
2012-09-01 Allen Martinmkconfig: remove bashisms and cleanup config.mk generation
2012-09-01 Allen Martintegra20: make board mkdir commands unconditional
2012-09-01 Allen Martintegra20: tec: add tegra20-common-post.h
2012-09-01 Allen Martintegra20: rename CONFIG_MACH_TEGRA_GENERIC
2012-09-01 Allen Martintegra20: move tegra20 SoC code to arch/arm/cpu/tegra20...
2012-09-01 Allen Martintegra20: rename tegra2 -> tegra20
2012-09-01 Stephen WarrenARM: add Raspberry Pi model B board, using BCM2835 SoC
2012-09-01 Stephen WarrenARM: add basic support for the Broadcom BCM2835 SoC
2012-09-01 Stephen WarrenARM: arm1176: enable instruction cache in arch_cpu_init()
2012-09-01 Stephen WarrenREADME: fix references to config_cmd_default.h
2012-09-01 Mathieu J.... snowball: Adding board specific cache cleanup routine
2012-09-01 Mathieu J.... armv7: Adding cpu specific cache managmenent
2012-09-01 John Rigbyu8500: Separating mmc config parameters from driver
2012-09-01 Mathieu J.... u8500: Enabling power to MMC device on AB8500 V2
2012-09-01 Mathieu J.... u8500: Moving processor-specific functions to cpu area.
2012-09-01 Mathieu J.... snowball: applying power to LAN and GBF controllers
2012-09-01 Mathieu J.... snowball: Moving to ux500.v2 addess scheme for PRCMU...
2012-09-01 Mathieu J.... snowball: Adding CPU clock initialisation
2012-09-01 Mathieu J.... snowball: Adding architecture dependent initialisation
2012-09-01 Mathieu J.... u8500: Moving prcmu to cpu directory
2012-09-01 Mathieu J.... snowball: Add support for ux500 based snowball board
2012-09-01 Tom Rinidavinci, c6x: Always use C version of reset code
2012-09-01 Jeroen Hofsteearm: omap: Fix switching back to nandecc sw.
2012-09-01 Heiko Schocherdavinci: enbw_cmc: change switch init behaviour
2012-09-01 Satyanarayana... am33xx evm: Update secure_emif_sdram_config during...
2012-09-01 Sughosh Ganuda8xx/hawkboard: Add support for ohci host controller
2012-09-01 Tom Riniarmv7: Make lowlevel_init.S's lowlevel_init do ABI...
2012-09-01 Tom Riniomap4/5/am33xx: Make lowlevel_init available to all...
2012-09-01 Tom Riniam335x evm: Enable support for spi0
2012-09-01 Tom Riniam33xx: Add support, update omap3 McSPI driver
2012-09-01 Tom Riniam335x evm: Enable MMC1 pinmux
2012-09-01 Tom Riniam33xx: Correct MMC1, remove MMC2 support
2012-09-01 Tom Riniam335x evm: Initial support for AM335x GP EVM Profiles
2012-09-01 Otavio Salvadorsc_sps_1: Adjust board config to use 'mxs' SoC code
2012-09-01 Benoît Thébaudeaurtc: imxdi: Initial support
2012-09-01 Marek VasutMX28: Add SchulerControl SC_SPS_1 platform
2012-09-01 Stathis Voukelatosi.MX28: bug fixes in PMU configuration code
2012-09-01 Marek VasutMX28: Move the u-boot.bd info CPUDIR/SOCDIR
2012-09-01 Fabio Estevamvision2: do not overwrite the console
2012-09-01 Fabio Estevammx51evk: do not overwrite the console
2012-09-01 Stefano BabicMX5: mx53loco: do not overwrite the console
2012-09-01 Marek VasutMX28: Fix MXS MMC DMA issues
2012-09-01 Marek VasutMX28: Transfer small blocks via PIO in MXS MMC
2012-09-01 Marek VasutMX28: Split out the PIO and DMA transfer functions
2012-09-01 Marek VasutMX28: Fix up the MMC driver DMA mode
2012-09-01 Otavio Salvadormxs: rename mx28.c to mxs.c as it is common to i.MX233...
2012-09-01 Otavio Salvadormxs: Clarify why we poweroff in case of brownout in...
2012-09-01 Otavio Salvadormxs: Reowork SPL to use 'mxs' prefix for methods
2012-09-01 Otavio Salvadormxs: prefix register structs with 'mxs' prefix
2012-09-01 Otavio Salvadormxs: prefix register acessor macros with 'mxs' prefix
2012-09-01 Otavio Salvadormxs: reorganize source directory for easy sharing of...
2012-09-01 Fabio Estevammx28evk: Turn on caches
2012-09-01 Otavio SalvadorMX28: use a clear name for DDR2 initialization
2012-09-01 Veli-Pekka... Add support for Bluegiga APX4 Development Kit
2012-09-01 Otavio SalvadorMX28: extend print_cpuinfo() to use chip information
2012-09-01 Marek VasutMX28: SPI: Add DMA transfer support
2012-09-01 Marek VasutMX28: SPI: Pull out the PIO transfer function
2012-09-01 Marek VasutMX28: SPI: Refactor spi_xfer a bit
2012-09-01 Otavio Salvadorimx: Use a clear identification of an unidentified...
2012-09-01 Markus Hubigat91: Add support for taskit AT91SAM9G20 boards.
2012-09-01 Markus HubigEnable the EMAC clock in at91_macb_hw_init().
2012-09-01 Andreas BießmannMAINTAINERS: fix Andreas Bießmann AVR32 entry
2012-09-01 Andreas BießmannMAINTAINERS: fix entry of Ilko Iliev
2012-09-01 Bo Shenarm : Atmel : add at91sam9x5ek board support
2012-09-01 Andreas Bießmanndoc/git-mailrc: update at91 and avr32
2012-09-01 Ilya Yanokam335x_evm: enable SMSC PHY driver
2012-09-01 Enric Balletbò... OMAP3: fix DRAM size for IGEP-based boards.
2012-09-01 Laurence WithersDaVinci DA8xx: fix set_cpu_clk_info()
2012-09-01 Laurence WithersDaVinci DA8xx: replace magic number for DDR speed
2012-09-01 Laurence WithersDaVinci DA850: UART2 clock ID comes from ASYNC3
2012-09-01 Laurence WithersDaVinci DA8xx: tidy up clock ID definition
2012-09-01 Tom Rinidoc/git-mailrc: Update 'ti' alias
2012-09-01 Marek Vasutdm: Move OMAP GPIO driver to drivers/gpio/
2012-09-01 Marek Vasutdm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
2012-09-01 Tom Riniam33xx: Rework pinmux functions
2012-09-01 Tom Riniam33xx evm: Add CONFIG_CMD_EEPROM and related
2012-09-01 Tom Riniam33xx: Add support for TI AM335x StarterKit EVM
2012-09-01 Tom Riniam33xx: Remove board/ti/am335x/evm.c
2012-09-01 Tom Riniam33xx: Add DDR3 (Micron MT41J128M16JT-125) timings...
2012-09-01 Tom Riniam33xx: Rework config_ddr to make DDR3 support easier.
2012-09-01 Tom Riniam33xx: Move some variables in emif4.c, mark them static.
2012-09-01 Tom Riniam33xx: Correct and clean up ddr_regs struct
2012-09-01 Tom Riniam33xx: Do not touch 'ratio1' fields
2012-09-01 Tom Riniam33xx: Rework config_io_ctrl slightly
2012-09-01 Tom Riniam33xx: Use emif_regs struct for storing initialization...
2012-09-01 Tom Riniam33xx: Turn a number of 'int' functions to 'void'
2012-09-01 Tom Riniam33xx: Document what we're doing with ddrctrl->ddrckectrl
2012-09-01 Vaibhav Bediaam335x: ddr_defs: Update EMIF parameters
2012-09-01 Tom Riniam33xx: Clean up unused DDR defines, prefix more with...
2012-09-01 Tom Riniam33xx: Move the call to ddr_pll_config, make it take...
2012-09-01 Tom Riniam33xx: Pass to config_ddr the type of memory that...
next