platform/kernel/linux-rpi.git
2022-03-21 Dave Stevensondrm/fourcc: Add packed 10bit YUV 4:2:0 format
2022-03-21 popcornmixbcmgenet: Disable skip_umac_reset by default
2022-03-21 Jim Quinlandt-bindings: pci: Add DT docs for Brcmstb PCIe device
2022-03-21 Phil Elwellof: overlay: Correct symbol path fixups
2022-03-21 Phil Elwellvideo: fbdev: bcm2708_fb: Use common compat header
2022-03-21 Phil Elwelldrivers: char: vcio: Use common compat header
2022-03-21 Phil Elwellpinctrl: bcm2835: Remove gpiochip on error
2022-03-21 Phil Elwellstaging: vchiq_arm: Give vchiq children DT nodes
2022-03-21 Luke HindsInitialise rpi-firmware before clk-bcm2835
2022-03-21 Stefan WahrenARM: bcm: Backport BCM2711 support from upstream
2022-03-21 Dave Stevensonstaging: vchiq: Use the old dma controller for OF confi...
2022-03-21 Dave Stevensonstaging: vchiq_arm: Set up dma ranges on child devices
2022-03-21 popcornmixclk-bcm2835: Disable v3d clock
2022-03-21 popcornmixclk-raspberrypi: Allow cpufreq driver to also adjust...
2022-03-21 popcornmixv3d_gem: Kick the clock so firmware knows we are using...
2022-03-21 popcornmixv3d_drv: Handle missing clock more gracefully
2022-03-21 James Hughesnet:phy:2711 Allow ethernet LED mode to be set via...
2022-03-21 Dave Stevensonstaging: vchiq_arm: Register bcm2835-codec as a platfor...
2022-03-21 Dave Stevensonstaging: vchiq_arm: Register vcsm-cma as a platform...
2022-03-21 Phil Elwelldrm/v3d: Plug dma_fence leak
2022-03-21 Phil Elwelldrm/v3d: Suppress all but the first MMU error
2022-03-21 Markus Proellermedia: i2c: Add a driver for the Infineon IRS1125 depth...
2022-03-21 Markus Proellerdt-bindings: Add binding for the Infineon IRS1125 sensor
2022-03-21 James HughesRename HDMI ALSA device names, check for enable state
2022-03-21 Stefan WahrenARM: bcm: Switch board, clk and pinctrl to bcm2711...
2022-03-21 Phil Elwelldrm/v3d: Delete pm_runtime support
2022-03-21 Dave Stevensonstaging: bcm2835-camera: Add greyworld AWB mode
2022-03-21 Dave Stevensonv4l2: Add a Greyworld AWB mode.
2022-03-21 Dave Stevensonmedia: dt-bindings: Add binding for the Sony IMX219...
2022-03-21 Phil Elwellarch/arm64: Add Revision, Serial, Model to cpuinfo
2022-03-21 Phil Elwellarch/arm: Add model string to cpuinfo
2022-03-21 Phil Elwellconfigs: arm64/bcm2711: Enable V3D
2022-03-21 Jonathan Bellxhci: Use more event ring segment table entries
2022-03-21 Phil Elwellnet: bcmgenet: Workaround #2 for Pi4 Ethernet fail
2022-03-21 James HughesAdd HDMI1 facility to the driver.
2022-03-21 Jonathan Bellhid: usb: Add device quirks for Freeway Airmouse T3...
2022-03-21 Jonathan Belldrivers: char: add chardev for mmap'ing the RPiVid...
2022-03-21 Eric Anholtdrm/v3d: Clock V3D down when not in use.
2022-03-21 Eric Anholtdrm/v3d: HACK: gut runtime pm for now.
2022-03-21 popcornmixclk-bcm2835: Avoid null pointer exception
2022-03-21 Phil Elwelli2c: bcm2835: Set clock-stretch timeout to 35ms
2022-03-21 Eric Anholtdrm/v3d: Hook up the runtime PM ops.
2022-03-21 Eric Anholtdrm/v3d: Skip MMU flush if the device is currently...
2022-03-21 Eric Anholtdrm/v3d: Add support for 2711.
2022-03-21 Phil Elwellarm: bcm2835: Add bcm2838 compatible string.
2022-03-21 Jonathan Bellusbhid: call usb_fixup_endpoint after mangling intervals
2022-03-21 Jonathan Bellxhci: implement xhci_fixup_endpoint for interval adjust...
2022-03-21 Jonathan Bellusb: add plumbing for updating interrupt endpoint inter...
2022-03-21 Eric Anholtclk: bcm2835: Allow reparenting leaf clocks while they...
2022-03-21 Eric Anholtclk: bcm2835: Add support for setting leaf clock rates...
2022-03-21 Eric Anholtsoc: bcm: bcm2835-pm: Add support for 2711.
2022-03-21 Phil Elwellclk-bcm2835: Don't wait for pllh lock
2022-03-21 Martin Sperlspi: bcm2835: enable shared interrupt support
2022-03-21 Jonathan Bellnet: genet: enable link energy detect powerdown for...
2022-03-21 Phil Elwellbcmgenet: Better coalescing parameter defaults
2022-03-21 Jonathan Bellbcmgenet: constrain max DMA burst length
2022-03-21 Stefan Wahrenhwrng: iproc-rng200: Add BCM2838 support
2022-03-21 Phil Elwellarm: bcm2835: DMA can only address 1GB
2022-03-21 Phil Elwellarm: bcm2835: Fix FIQ early ioremap
2022-03-21 Phil Elwellw1: w1-gpio: Make GPIO an output for strong pullup
2022-03-21 Dave Stevensonstaging: mmal-vchiq: Fix memory leak in error path
2022-03-21 Dave Stevensonstaging: mmal-vchiq: Free the event context for control...
2022-03-21 Dave Stevensonstaging: mmal-vchiq: Update mmal_parameters.h with...
2022-03-21 Dave Stevensonstaging: mmal_vchiq: Add in the Bayer encoding formats
2022-03-21 Dave Stevensonclk: clk-bcm2835: Use %zd when printing size_t
2022-03-21 Dave Stevensonstaging: mmal-vchiq: Fix client_component for 64 bit...
2022-03-21 Dave Stevensonmedia: videobuf2: Allow exporting of a struct dmabuf
2022-03-21 Dave Stevensonstaging: vc04_services: Support sending data to MMAL...
2022-03-21 Dave Stevensonstaging: mmal-vchiq: Add support for event callbacks.
2022-03-21 Dave Stevensonstaging: mmal-vchiq: Avoid use of bool in structures
2022-03-21 Dave Stevensonmedia: tc358743: Return an appropriate colorspace from...
2022-03-21 Dave StevensonMAINTAINERS: Add entry for BCM2835 Unicam driver
2022-03-21 Dave Stevensondt-bindings: Document BCM283x CSI2/CCP2 receiver
2022-03-21 Dave Stevensonmedia: videodev2: Add helper defines for printing FOURCCs
2022-03-21 Dave Stevensonmedia: adv7180: Add YPrPb support for ADV7282M
2022-03-21 Dave Stevensonmedia: adv7180: Default to the first valid input
2022-03-21 Dave Stevensonmedia: tc358743: Check I2C succeeded during probe.
2022-03-21 Dave Stevensonmedia: tc358743: Add support for 972Mbit/s link freq.
2022-03-21 Philipp Zabelmedia: tc358743: fix connected/active CSI-2 lane reporting
2022-03-21 Dave Stevensonmedia: tc358743: Increase FIFO level to 374.
2022-03-21 P33Mlan78xx: use default alignment for rx buffers
2022-03-21 Phil Howardrtc: rv3028: Add backup switchover mode support
2022-03-21 Phil Elwellbcm2835-dma: Add support for per-channel flags
2022-03-21 Phil Elwelllan78xx: EEE support is now a PHY property
2022-03-21 Joshua Emelelan78xx: Debounce link events to minimize poll storm
2022-03-21 Dave Stevensonfirmware: raspberrypi: Report the fw variant during...
2022-03-21 Phil Elwellnet: lan78xx: Support auto-downshift to 100Mb/s
2022-03-21 James HughesUpdate issue templates (#2736)
2022-03-21 Serge Schneiderdrivers: thermal: step_wise: avoid throttling at hyster...
2022-03-21 Ram Chandrasekardrivers: thermal: step_wise: add support for hysteresis
2022-03-21 Phil Elwellsc16is7xx: Don't spin if no data received
2022-03-21 Stefan Wahrenfirmware: raspberrypi: Add backward compatible get_thro...
2022-03-21 popcornmixcxd2880: CXD2880_SPI_DRV should select DVB_CXD2880...
2022-03-21 Phil Elwelllan78xx: Move enabling of EEE into PHY init code
2022-03-21 Phil Elwellbrcmfmac: Re-enable firmware roaming support
2022-03-21 Dave Stevensonnet: lan78xx: Disable TCP Segmentation Offload (TSO)
2022-03-21 Phil Elwellof: configfs: Use of_overlay_fdt_apply API call
2022-03-21 Phil Elwellirqchip: irq-bcm2835: Calc. FIQ_START at boot-time
2022-03-21 Phil Elwellfirmware/raspberrypi: Notify firmware of a reboot
2022-03-21 Nick BulleidAdd ability to export gpio used by gpio-poweroff
next