platform/kernel/u-boot.git
2018-09-15 Patrice Chotardusb: ehci-generic: Add vbus-supply regulator support
2018-09-14 Tom RiniRevert "ARM: da850evm_direct_nor_defconfig: Enable...
2018-09-14 Tom Riniam3517_evm: Drop inadvertently added line
2018-09-14 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-i2c
2018-09-14 Tuomas Tynkkyneni2c: Drop CONFIG_SYS_I2C_MXS
2018-09-12 Adam FordMMC: davinici_mmc: Enable CD and WP with DM and OF_CONTROL
2018-09-12 Adam FordARM: am3517_evm: Disable DM_I2C_COMPAT
2018-09-12 Adam FordConfigs: am3517_evm: Remove TWL4030 reference
2018-09-12 Adam FordARM: omap3_logic: Enable DM_PMIC and DM_REGULATOR
2018-09-12 Adam FordARM: da850evm_direct_nor_defconfig: Enable DM_SERIAL
2018-09-12 Adam FordARM: davinci: omapl138_lcdk: Enable DM_MMC
2018-09-12 Adam FordARM: davinci: da850evm: Support DM_MMC
2018-09-12 Adam FordMMC: Enable DM_MMC for Davinci
2018-09-12 Adam FordARM: omap3_logic: Enable Pinctrl
2018-09-12 Adam FordARM: omap3_logic_defconfig: Convert to DM_SPL
2018-09-12 Adam Fordmmc: omap_hsmmc: Make DM_GPIO calls dependent on DM_GPIO
2018-09-12 Adam FordDM: serial: ti_omap3_common: Don't define serial unless...
2018-09-12 Adam FordARM: mach-omap2: Don't initialize I2C if DM_I2C is...
2018-09-12 Adam FordDM: omap_gpio: Reduce overhead when used with OF_PLATDATA
2018-09-12 Adam FordDM: OMAP24XX_I2C: Reduce overhead when used with OF_PLA...
2018-09-12 Adam FordDM: I2C: Reduce overhead when used with OF_PLATDATA
2018-09-12 Adam Fordregulator: pbias: Add additional compatible flags
2018-09-12 Adam FordGPIO: omap_gpio: Fix gpio name names with device tree
2018-09-12 Adam FordARM: dts: da850-evm-u-boot: Remove redundant entries
2018-09-12 Adam Fordarm: dts: da850: Re-sync da850-evm.dts from Linux 4.18
2018-09-12 Adam Forddm: gpio: da8xx_gpio: Add support for GPIO_ACTIVE_LOW...
2018-09-12 Adam FordDM: GPIO: Fix da8xx GPIO indexing over GPIO 32
2018-09-12 Adam FordARM: configs: Add da850evm_nand to boot from NAND
2018-09-12 Adam FordARM: da850evm_direct_nor: Enable CONFIG_BLK
2018-09-11 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-uniphier
2018-09-11 Tom RiniMerge tag 'fpga-for-v2018.11' of git://git.denx.de...
2018-09-11 Lokesh Vutlaconfigs: am65x_evm_a53: Add initial support
2018-09-11 Lokesh Vutlaarm64: dts: k3: Add u-boot specific nodes
2018-09-11 Lokesh Vutlaarm64: dts: k3: Add Support for AM654 SoC
2018-09-11 Andreas Dannenberginclude: am654_evm: Establish initial environment for...
2018-09-11 Lokesh Vutlaboard: ti: am654: a53: Add initial support for am654
2018-09-11 Lokesh Vutlagpio: do not include <asm/arch/gpio.h> for ARCH_K3
2018-09-11 Lokesh Vutlammc: k3_arasan: Add sdhci driver support for K3 family...
2018-09-11 Lokesh Vutlaspl: Allow remoteproc drivers to be used within SPL
2018-09-11 Lokesh Vutlaremoteproc: Introduce K3 remoteproc driver
2018-09-11 Lokesh Vutlaremoteproc: Introduce K3 system controller
2018-09-11 Lokesh Vutlaremoteproc: Allow for individual remoteproc initialization
2018-09-11 Lokesh Vutlaspl: Allow mailbox drivers to be used within SPL
2018-09-11 Lokesh Vutlamailbox: Introduce K3 Secure Proxy Driver
2018-09-11 Lokesh Vutlamailbox: Allow attaching private data for mbox_chan
2018-09-11 Andreas Dannenbergsysreset: Add TI System Control Interface (TI SCI)...
2018-09-11 Andreas Dannenbergpower domain: Introduce TI System Control Interface...
2018-09-11 Lokesh Vutlapower domain: Add support for multiple powerdomains...
2018-09-11 Andreas Dannenbergclk: Introduce TI System Control Interface (TI SCI...
2018-09-11 Andreas Dannenbergclk: Extend clock control with an optional data field
2018-09-11 Andreas Dannenbergreset: Introduce TI System Control Interface (TI SCI...
2018-09-11 Andreas Dannenbergreset: Extend reset control with an optional data field
2018-09-11 Andreas Dannenbergdm: reset: Update uclass to allow querying reset status
2018-09-11 Andreas Dannenbergdm: firmware: Automatically bind child devices
2018-09-11 Lokesh Vutlafirmware: ti_sci: Add support for processor control...
2018-09-11 Andreas Dannenbergfirmware: ti_sci: Add support for reboot core service
2018-09-11 Lokesh Vutlafirmware: ti_sci: Add support for clock control
2018-09-11 Andreas Dannenbergfirmware: ti_sci: Add support for device control
2018-09-11 Andreas Dannenbergfirmware: ti_sci: Add support for board configuration
2018-09-11 Lokesh Vutlafirmware: Add basic support for TI System Control Inter...
2018-09-11 Lokesh Vutlaarmv8: K3: am654: Add support for generating build...
2018-09-11 Lokesh Vutlaarmv8: K3: am654: Introduce FIT generator script
2018-09-11 Lokesh Vutlaarmv8: K3: am654: Add custom MMU support
2018-09-11 Andreas Dannenbergarm: K3: am654: Unlock control module registers during...
2018-09-11 Lokesh Vutlaarm: K3: am654: Add support for boot device detection
2018-09-11 Lokesh Vutlaarm: K3: Update _start instruction
2018-09-11 Lokesh Vutlaarm: K3: Add support for AM654 SoC definition
2018-09-11 Lokesh Vutlaarm: K3: Add initial support for TI's K3 generation...
2018-09-11 Masahiro YamadaARM: uniphier: remove ad-hoc clock enabling for EHCI
2018-09-11 Masahiro Yamadammc: uniphier-sd: sync with Linux
2018-09-11 Masahiro YamadaARM: uniphier: enable CONFIG_CMD_UBI
2018-09-11 Masahiro YamadaARM: uniphier: increase CONFIG_SYS_MONITOR_LEN again
2018-09-11 Masahiro YamadaARM: dts: uniphier: sync DT with Linux 4.19-rc1
2018-09-11 Michal SimekMAINTAINERS: Add myself as the FPGA maintainer
2018-09-11 Michal Simekcmd: fpga: Fix loads command
2018-09-11 Michal Simekcmd: fpga: Use CMD_RET_FAILURE instead of simple 1
2018-09-11 Michal Simekcmd: fpga: Add support for missing fpga loadmk commands
2018-09-11 Michal Simekcmd: fpga: Fix loadmk command
2018-09-11 Michal Simekcmd: fpga: Fix loadfs command
2018-09-11 Michal Simekcmd: fpga: Fix dump and all direct fpga load commands
2018-09-11 Michal Simekcmd: fpga: Extract fpga info command to separate function
2018-09-11 Michal Simekcmd: fpga: Create new do_fpga_wrapper for using u-boot...
2018-09-11 Michal Simekcmd: fpga: Clean wrong_parms handling
2018-09-11 Michal Simekcmd: fpga: Remove parameter checking from fpga loadfs...
2018-09-11 Michal Simekcmd: fpga: Move parameter checking for loadfs/loads
2018-09-11 Michal Simekcmd: fpga: Cleanup error handling in connection to...
2018-09-11 Michal Simekcmd: fpga: Move fpga_get_op to avoid local function...
2018-09-11 Michal Simekcmd: fpga: Move error handling to do_fpga()
2018-09-11 Michal Simektest/py: Extend fpga command to test all fpga load...
2018-09-11 Michal Simekcmd: fpga: Remove fit image support passed without...
2018-09-11 Michal Simekfpga: Kconfig: Replace spaces with tabs
2018-09-11 Kever Yangcmd: part: use MAX_SEARCH_PARTITIONS for part search
2018-09-11 Vikas Manochaarm: armv7m: clean up armv7m unified code compilation
2018-09-11 Vikas Manochaarm: armv7m: remove un-necessary If then instruction
2018-09-11 Vikas Manochaarm: stm32: Remove redundant thumb build selection
2018-09-11 Quentin Schulzarm: spear: enable GPIO3 and 4 clocks when the GPIO...
2018-09-11 Mark Tomlinsontools: mkimage: Ensure munmap unmaps the same length...
2018-09-11 Lokesh Vutlaserial: omap: Introduce DM specific omap serial
2018-09-11 Grazvydas Ignotasomap3: pandora: Enable DM_SERIAL
2018-09-11 Thomas Fitzsimmonsboard: arm: Add support for Broadcom BCM7260
next