platform/kernel/linux-amlogic.git
2018-03-05 Liang Yangnand: improve nfc clock
2018-03-05 Brian Zhuosd: fix the fifo ctrl setting error
2018-03-05 Evoke Zhanglcd: add mipi-dsi checking panel state support
2018-03-05 Yalong LiuDRM: add drm support for g12a
2018-03-05 Evoke Zhangvpu: update vpu_clk_gate control for g12a
2018-03-05 weiming.liubl_extern: add lp8556 driver
2018-03-05 kele baidi: fix MADI flicker for mem enable
2018-03-05 Xing Wangaudio: auge: fix audio locker, resample, tdm format...
2018-03-05 Brian Zhudisplay: power improvement for g12a
2018-03-05 Zongdong Jiaohdmitx: bringup for g12a
2018-03-05 weiming.liulcd: add mipi_dsi cmd debug interface
2018-03-05 Jiyu Yangdts: add 850M clk configure
2018-03-05 Bo Yangdtsi: meson-g12a: add pwm slave device node
2018-03-05 MingLiang Dongamvecm: optimize g12a hdr effect
2018-03-05 MingLiang Dongamvecm: fix dynamic switch output mode
2018-03-05 Brian Zhuvideo: add bypass cm interface and change afbc busrt
2018-03-05 Qiufang Daiclock: G12A: add 846M freq for pll table
2018-03-05 hong.guoCPUFREQ: fix cpufreq at low 1.2G.
2018-03-05 huan.biaothermal: G12A: bind cooldev dts.
2018-03-05 hong.guoCPUFREQ: add cpufreq 1.7G.
2018-03-05 Xing Wangaudio: dts: add audio efuse module support for g12a
2018-03-05 Zhuo Wangdts: g12a: ethernet: re-organize ethernet dts/dtsi
2018-03-05 Nanxin.Qindts: enable clocks of the media modules.
2018-03-05 MingLiang Dongamvecm: add hdr support for g12a
2018-03-05 Yue Wangusb: fix usb device rename bug for g12a
2018-03-05 Yue Wangusb: fix usb2 phy pll setting for g12a
2018-03-05 Yi Zhouhdmitx: bringup for g12a
2018-03-05 Brian Zhuosd: enable osd rdma and afbc function
2018-03-05 hong.guoCPUFREQ: delete cpufreq driver's log config.
2018-03-05 Dezhi Kongvdin: add reset patch && viu debug interface
2018-03-05 huan.biaothermal: G12A: update thermal driver
2018-03-05 huan.biaothermal: G12A: update thermal driver.
2018-03-05 huan.biaothermal: G12A: add tsensor and cooldev dts.
2018-03-05 Yonghui Yusdio: both pio&dma are supported for g12a
2018-03-05 huan.biaothermal: G12A: fix cpucore cooling devices driver.
2018-03-05 huan.biaothermal: G12A: tsensor and cooldev driver.
2018-03-05 Brian Zhuppmgr: enable for g12a
2018-03-05 Jiamin Maunifykey: add unifykey description in g12a_skt dts
2018-03-05 Yu Turemote out: add irblaster config for G12A
2018-03-05 weiming.liulcd: update pll parameter
2018-03-05 Qiufang Daiclock: G12A: add hevcf, spicc clock
2018-03-05 kuibao zhangBT: g12a_skt: initial host wake bt pin [1/1]
2018-03-05 Bo Yangi2c: meson: set clk div for fast mode
2018-03-05 hong.guoCPUFREQ: modify cpufreq dts.
2018-03-05 Yi Zhouhdmitx: bringup for g12a
2018-03-05 Evoke Zhangvout: add missed vout2_module macro definition protection
2018-03-05 Liang Yangnand: free controller when no nand inserted or error
2018-03-05 hong.guoCPUFREQ: add dvfs cpufreq and latency.
2018-03-05 Yi Zhouhdmitx: eliminate unnecessary print
2018-03-05 weiming.liulcd: add g12a support
2018-03-05 Bo Yangpwm: meson-g12a: fix pwm xtal
2018-03-05 Nanxin Qinmedia: fixed the issure of mpeg12 playback.
2018-03-05 Bo Yangdts: meson-g12a: update hmditx i2c pinctrl
2018-03-05 kele baidi: di post wr&vpp link disaply ok
2018-03-05 Sunny Luodts: g12a-skt: add touch device node
2018-03-05 Brian Zhuosd: make osd2 and osd3 work
2018-03-05 Jiyu Yangvideo: enable ionvideo
2018-03-05 Brian Zhuvideo: disable blend ctrl when video off
2018-03-05 Liang Yangnand: add clock for mtd nand driver
2018-03-05 hong.guoCPUFREQ: add cpufreq driver.
2018-03-05 Bo Yangdtsi: meson-g12a: add all pwm pinmux definitions
2018-03-05 Nanxin.Qinmedia: add the HEVC_DBLK_CFGE to hevc regs.
2018-03-05 Yixun Laneth: meson-g12a: add Ethernet driver support
2018-03-05 hongmin huacec: cec g12a bring up
2018-03-05 Zan Pengpcie: fix config spaces error
2018-03-05 Bo Yangdts: g12a-skt: removed repetitive definition of i2c...
2018-03-05 Bo Yangdts: g12a-skt: add i2c-0 enable
2018-03-05 Brian Zhurdma: enable rdma mem_PD g12a
2018-03-05 Zan Pengpcie: fix pcie reset gpio failed
2018-03-05 kele baidi: G12A add di nrds&pps&diwr support
2018-03-02 Bo Yangdtsi: meson-i2c: add g12a i2c pinmux definitions
2018-03-02 Brian Zhuosd: enable lacth and use extern canvas mode
2018-03-02 Xing Wangaudio: auge: fix tdm skew, pdm clk, spdif to hdmxtx...
2018-03-02 Yue Wangusb: add usb otg driver support for g12a
2018-03-02 Qiufang Daiclock: g12a: add emmc portA and aoclkc
2018-03-02 Yonghui Yuemmc: g12a: enable emmc at high speed mode
2018-03-02 Yue Wangusb: add usb3.0 driver support for g12a
2018-03-02 Dezhi Kongvpp: config vdin/sr for g12a
2018-03-02 Liang Yangnand: mtd nand modification
2018-03-02 hong.guoCPUFREQ: add cpufreq dts and config.
2018-03-02 Nanxin.Qinmedia: add the cpu type of G12A and AVS2 vformat
2018-03-02 Xing Wangaudio: codec: add ad82584f driver
2018-03-02 Zan Pengpcie: add pcie dts support for G12A
2018-03-02 Nian Jingcvbs: cvbs bring up for g12a
2018-03-02 Zan Pengpcie: add pcie driver support for G12A
2018-03-02 Xing Wangaudio: auge: avout and notify spdifb to hdmitx
2018-03-02 Jiyu Yangosd: disable out fence and wait infence
2018-03-02 Brian Zhuvideo: disable vd1 post and pre as default
2018-03-02 Yi Zhouhdmitx: update hdmitx mode parameters
2018-03-02 Yu Turemote in: add remote dtsi config for G12A
2018-03-02 Weiguang.ruanwifi/bt: add wifi bt config [1/1]
2018-03-02 Yonghui Yusdcard: g12a: enbable hotplug
2018-03-02 Xingyu Cheniio: saradc: add support for g12a
2018-03-02 Yue Wangusb: add usb host & device driver support for g12a
2018-03-02 Liang Yangnand: mtd nand initial version
2018-03-02 qi duanUART: G12A: verify all uart port on skt dts.[1/1]
2018-03-02 Qiufang Daiclock: G12A: fine-tune pcie/common pll parameters
2018-03-02 Yi Zhouhdmitx: update 1080p60hz parameters
2018-03-02 Brian Zhuvideo: enable vd1 scaler mem_pd for g12a
2018-03-02 kele baidi: G12A skt dts add di support
next