platform/kernel/u-boot.git
2018-10-22 Xiaoliang YangKconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig
2018-10-22 Dan Cimpocaboard: ge: bx50v3: fix initialization of i2c bus0
2018-10-22 Ian Rayboard: ge: bx50v3: b{4,6}50v3 modeline
2018-10-22 Ian Rayboard: ge: bx50v3: correct LDB clock
2018-10-22 Fabien Lahoudereboard: ge: bx50v3: Change maintainer
2018-10-22 Breno Matheus... doc: imx: Improve i.MX documentation naming
2018-10-22 Breno Matheus... doc: imx: misc: Reorganize miscellaneous documentation
2018-10-22 Breno Matheus... doc: imx: hab: Reorganize High Assurance Boot documentation
2018-10-22 Breno Matheus... doc: imx: Reorganize i.MX SoC common documentation
2018-10-22 Breno Matheus... doc: imx: mkimage: reorganize i.MX mkimage documentation
2018-10-22 Breno Matheus... doc: imx: Move SPD related info to the appropriate doc
2018-10-22 Breno Matheus... doc: imx: reorganize i.MX documentation
2018-10-22 Peng Fanimx: imx8qxp_mek: update to build image in U-Boot
2018-10-22 Peng Fanarm: imx: include imx8image support
2018-10-22 Peng Fantools: add i.MX8/8X image support
2018-10-22 Peng Fanimx: add i.MX8QXP MEK board support
2018-10-22 Peng Fanarm: dts: introduce dtsi for i.MX8QXP
2018-10-22 Peng Fanmmc: fsl_esdhc: add uclass clk support
2018-10-22 Ye Lifsl_esdhc: Update usdhc driver to support i.MX8
2018-10-22 Peng Fanserial: lpuart: support uclass clk api
2018-10-22 Ye Liserial: lpuart: Enable RX and TX FIFO
2018-10-22 Peng Fanserial_lpuart: Update lpuart driver to support i.MX8
2018-10-22 Peng Fanclk: imx: add clk driver for i.MX8QXP
2018-10-22 Peng Fanpower: Add power domain driver for i.MX8
2018-10-22 Peng Fanpinctrl: Add pinctrl driver for i.MX8
2018-10-22 Peng Fangpio: mxc_gpio: add support for i.MX8
2018-10-22 Peng Fanimx8: add dummy clock
2018-10-22 Peng Fanimx8: add iomux configuration api
2018-10-22 Anatolij Gustschinimx8: cpu: add uclass based CPU driver
2018-10-22 Anatolij Gustschinimx8: cpu: add function for reading FEC MAC from fuse
2018-10-22 Peng Fanimx8: add arch_cpu_init arch_cpu_init_dm
2018-10-22 Peng Fanimx8: add mmu and dram related functions
2018-10-22 Peng Fanimx8: implement mmc_get_env_dev
2018-10-22 Peng Fanimx8: add boot device detection
2018-10-22 Peng Fanimx8: add basic cpu support
2018-10-22 Peng Fanarmv8: add cpu core helper functions
2018-10-22 Peng Fanimx: add i.MX8 cpu type
2018-10-22 Peng Fanimx8: pins: include i.MX8QXP pin header when CONFIG_IMX...
2018-10-22 Peng Fanimx8: add imx-regs header file
2018-10-22 Peng Fanimx: boot_mode: Add FLEXSPI boot entry
2018-10-22 Peng Fanmisc: imx8: add scfw api impementation
2018-10-22 Peng Fanmisc: add i.MX8 misc driver
2018-10-22 Peng Fanarm: global_data: add scu_dev for i.MX8
2018-10-22 Peng Fanarm: build mach-imx for i.MX8
2018-10-22 Peng Fanimx: add Kconfig entry for i.MX8QXP
2018-10-22 Peng Fanimx8: add scfw macro definition
2018-10-22 Peng Fandt-bindings: soc: add i.MX8QXP pm and rsrc definition
2018-10-22 Peng Fandt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP...
2018-10-22 Peng Fandt-bindings: pinctrl: add i.MX8QXP pads definition
2018-10-16 Marek Vasutarm: mx5: Add M53Menlo board
2018-10-16 Marek Vasutarm: mx5: Add LDB clock config code
2018-10-16 Marek Vasutarm: imx: mx5: Make videoskip available on MX5
2018-10-09 Sébastien SzymanskiARM: opos6ul: make the board boot again
2018-10-09 Fabio Estevamconfigs: mx7: Remove CONFIG_DBG_MONITOR
2018-10-09 Fabio Estevamcolibri_imx7: prime get_ram_size() using imx_ddr_size()
2018-10-09 Marcel Ziswilerimx: mx7: fix potential overflow in imx_ddr_size()
2018-10-09 Fabio Estevampico-imx7d: Add USB Host support
2018-10-09 Fabio Estevampico-imx7d: Make SPL binary fit into 64kB
2018-10-09 Otavio Salvadorpico-imx6ul, pico-imx7d: Enable USB and PXE boot support
2018-10-09 Otavio Salvadorpico-imx6ul, pico-imx7d: Use eMMC user partition by...
2018-10-07 Jens WiklanderKconfig: sandbox: enable cmd_avb and dependencies
2018-10-07 Jens Wiklanderavb_verify: support sandbox configuration
2018-10-07 Jens Wiklandertest_avb: Update pymark.buildconfigspec information...
2018-10-07 Jens Wiklanderavb_verify: support using OP-TEE TA AVB
2018-10-07 Jens Wiklandertest: tee: test TEE uclass
2018-10-07 Jens Wiklandertee: add sandbox driver
2018-10-07 Jens Wiklandersandbox: imply CONFIG_TEE (TEE uclass)
2018-10-07 Jens Wiklandersandbox: dt: add sandbox_tee node
2018-10-07 Jens Wiklandertee: optee: support AVB trusted application
2018-10-07 Jens Wiklanderoptee: support routing of rpmb data frames to mmc
2018-10-07 Jens Wiklanderarm: dt: hikey: Add optee node
2018-10-07 Jens WiklanderDocumentation: tee uclass and op-tee driver
2018-10-07 Jens Wiklandertee: add OP-TEE driver
2018-10-07 Jens Wiklanderdt/bindings: add bindings for optee
2018-10-07 Jens WiklanderAdd UCLASS_TEE for Trusted Execution Environment
2018-10-07 Jens Wiklandermmc: rpmb: add mmc_rpmb_route_frames()
2018-10-07 Jens Wiklandercmd: avb: print error message if command fails
2018-10-07 Jens Wiklandercmd: avb read_rb: print rb_idx in hexadecimal
2018-10-07 Jens Wiklanderdm: fdt: scan for devices under /firmware too
2018-10-06 Michal Simekspl: spi: Do not hardcode fixed size for header
2018-10-06 Michal Simekspl: ram: Fix u_boot_pos calculation
2018-10-06 Patrice Chotardmach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7
2018-10-06 Heinrich Schuchardtfs: fat: fix set_cluster()
2018-10-06 Heinrich Schuchardtfs: fat: memory leak in fat_unlink()
2018-10-06 Adam FordARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection
2018-10-06 Adam FordARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35...
2018-10-06 Adam FordARM: DTS: Add support for Logic PD OMAP35 Torpedo ...
2018-10-06 Adam FordARM: DTS: Remove unnecessary u-boot.dtsi options from...
2018-10-06 Adam FordARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with...
2018-10-06 Liviu Dudaumisc: Add support for the Arm Versatile Express config bus
2018-10-06 Simon Goldschmidtconfigs: drop CONFIG_SYS_EXTRA_ENV_RELOC
2018-10-06 Akashi Takahirotest/py: test_fs: add docstring comments to helper...
2018-10-06 Akashi Takahirotest/py: test_fs: remove fs_type argument from umount_fs()
2018-10-06 Stephen Warrentest/py: ignore console read exceptions after test...
2018-10-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2018-10-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-socfpga
2018-10-05 Tom RiniMerge tag 'rockchip-for-v2018.11-rc2' of git://git...
2018-10-05 Tom RiniMerge tag 'arc-updates-for-2018.11-rc2' of git://git...
2018-10-05 Alexey Brodkinarc: Add support for IoT development kit
2018-10-05 Alexey BrodkinARC: Enable DISPLAY_CPUINFO & DISPLAY_BOARDINFO
next