platform/kernel/linux-exynos.git
2015-06-03 Sagi Grimbergiscsi: Fix iscsi endpoints leak
2015-06-03 James Bottomleyips: remove pointless #warning
2015-06-03 Nilesh Javalibnx2i: Fix call trace while device reset
2015-06-03 Tej Parkashbnx2i: Fixed firmware assert, during target logout.
2015-06-02 Yaniv Gardiscsi: ufs-qcom: enable UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION
2015-06-02 Yaniv Gardiscsi: ufs: add quirk to handle broken UFS HCI version
2015-06-02 Yaniv Gardiscsi: ufs-qcom: enable UFSHCD_QUIRK_DME_PEER_ACCESS_AUT...
2015-06-02 Yaniv Gardiscsi: ufs: introduce UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_...
2015-06-02 Yaniv Gardiscsi: ufs-qcom: enable quirk to fix gear change to HS
2015-06-02 Yaniv Gardiscsi: ufs: introduce a broken PA_RXHSUNTERMCAP quirk
2015-06-02 Yaniv Gardiscsi: ufs-qcom: enable UFSHCD_QUIRK_BROKEN_LCC
2015-06-02 Yaniv Gardiscsi: ufs: provide a quirk to disable the LCC
2015-06-02 Yaniv Gardiscsi: ufs-qcom: don't enable interrupt aggregation
2015-06-02 Yaniv Gardiscsi: ufs: introduce the capability and quirk for inter...
2015-06-02 Brian Kingipr: Increase default adapter init stage change timeout
2015-06-02 Seymour, Shane Mst: implement tape statistics
2015-06-02 Bart Van Asschetarget: Minimize SCSI header #include directives
2015-06-02 Bart Van Asschetarget: Correct a comment
2015-06-01 Bart Van AsscheMove code that is used both by initiator and target...
2015-06-01 Bart Van AsscheSplit SCSI header files
2015-06-01 Sumit.Saxena... megaraid_sas : Modify return value of megasas_issue_blo...
2015-06-01 Hannes Reineckescsi: Do not set cmd_per_lun to 1 in the host template
2015-06-01 Don Bracehpsa: change driver version
2015-06-01 Don Bracehpsa: add in new controller id
2015-06-01 Webb Scaleshpsa: cleanup reset
2015-05-31 Robert Elliotthpsa: propagate the error code in hpsa_kdump_soft_reset
2015-05-31 Robert Elliotthpsa: use scsi host_no as hpsa controller number
2015-05-31 Webb Scaleshpsa: use block layer tag for command allocation
2015-05-31 Robert Elliotthpsa: add interrupt number to /proc/interrupts interrup...
2015-05-31 Robert Elliotthpsa: create workqueue after the driver is ready for use
2015-05-31 Robert Elliotthpsa: fix try_soft_reset error handling
2015-05-31 Robert Elliotthpsa: cleanup for init_one step 2 in kdump
2015-05-31 Robert Elliotthpsa: skip free_irq calls if irqs are not allocated
2015-05-31 Robert Elliotthpsa: call pci_release_regions after pci_disable_device
2015-05-31 Webb Scaleshpsa: performance tweak for hpsa_scatter_gather()
2015-05-31 Webb Scaleshpsa: refactor and rework support for sending TEST_UNIT...
2015-05-31 Webb Scaleshpsa: don't return abort request until target is complete
2015-05-31 Webb Scaleshpsa: use helper routines for finishing commands
2015-05-31 Stephen Cameronhpsa: add support sending aborts to physical devices...
2015-05-31 Robert Elliotthpsa: do not print ioaccel2 warning messages about...
2015-05-31 Robert Elliotthpsa: clean up some error reporting output in abort...
2015-05-31 Robert Elliotthpsa: clean up driver init
2015-05-31 Robert Elliotthpsa: correct return values from driver functions.
2015-05-31 Robert Elliotthpsa: do not check cmd_alloc return value - it cannnot...
2015-05-31 Joe Handzikhpsa: add more ioaccel2 error handling, including under...
2015-05-31 Webb Scaleshpsa: add ioaccel sg chaining for the ioaccel2 path
2015-05-31 Robert Elliotthpsa: refactor freeing of resources into more logical...
2015-05-31 Robert Elliotthpsa: clean up error handling
2015-05-31 Robert Elliotthpsa: break hpsa_free_irqs_and_disable_msix into two...
2015-05-31 Joe Handzikhpsa: Get queue depth from identify physical bmic for...
2015-05-31 Joe Handzikhpsa: use ioaccel2 path to submit IOs to physical drive...
2015-05-31 Robert Elliotthpsa: print accurate SSD Smart Path Enabled status
2015-05-31 Webb Scaleshpsa: factor out hpsa_ioaccel_submit function
2015-05-31 Stephen Cameronhpsa: try resubmitting down raid path on task set full
2015-05-31 Stephen Cameronhpsa: do not ignore return value of hpsa_register_scsi
2015-05-31 Stephen Cameronhpsa: factor out hpsa_init_cmd function
2015-05-31 Robert Elliotthpsa: make function names consistent
2015-05-31 Stephen Cameronhpsa: allow lockup detected to be viewed via sysfs
2015-05-31 Stephen Cameronhpsa: hpsa decode sense data for io and tmf
2015-05-31 Stephen Cameronhpsa: decrement h->commands_outstanding in fail_all_out...
2015-05-31 Stephen Cameronhpsa: clean up aborts
2015-05-31 Webb Scaleshpsa: rework controller command submission
2015-05-31 Webb Scaleshpsa: clean up host, channel, target, lun prints
2015-05-31 Stephen Cameronhpsa: add masked physical devices into h->dev[] array
2015-05-31 Tomas Henzlhpsa: dont meddle with hw which isn't ours (cciss)
2015-05-31 Tomas Henzlcciss: correct the non-resettable board list
2015-05-31 Tomas Henzlcciss: remove duplicate entries from board_type struct
2015-05-26 Hannes Reineckeadvansys: Update to version 3.5 and remove compilation...
2015-05-26 Hannes Reineckeadvansys: Remove call to dma_cache_sync()
2015-05-26 Hannes Reineckeadvansys: use spin_lock_irqsave() in interrupt handler
2015-05-26 Hannes Reineckeadvansys: Check for DMA mapping errors
2015-05-26 Hannes Reineckeadvansys: Remove cmd_per_lun setting
2015-05-26 Hannes Reineckeadvansys: Remove obsolete virtual memory mapping comment
2015-05-26 Hannes Reineckeadvansys: Remove 'a_flag'
2015-05-26 Hannes Reineckeadvansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX'
2015-05-26 Hannes Reineckeadvansys: Remove CC_VERY_LONG_SG_LIST
2015-05-26 Hannes Reineckeadvansys: Remove ASC_SCSI_REQ_Q
2015-05-26 Hannes Reineckeadvansys: scsi_q1->data_addr is little endian
2015-05-26 Hannes Reineckeadvansys: cleanup function return codes
2015-05-26 Hannes Reineckeadvansys: Make AscIsrChipHalted() a void function
2015-05-25 Hannes Reineckeadvansys: remove 'ERR' definition
2015-05-25 Hannes Reineckeadvansys: Remove 'TRUE' and 'FALSE' definitions
2015-05-25 Hannes Reineckeadvansys: use standard data types
2015-05-25 Hannes Reineckeadvansys: use 'bool' instead of 'int'
2015-05-25 Hannes Reineckeadvansys: Use dma_pool for sg elements
2015-05-25 Hannes Reineckeadvansys: Use DMA-API for mapping request blocks
2015-05-25 Hannes Reineckeadvansys: Use DMA-API for carrier buffer
2015-05-25 Hannes Reineckeadvansys: use DMA-API for mapping sense buffer
2015-05-25 Hannes Reineckeadvansys: use shared host tag map for command lookup
2015-05-25 Hannes Reineckeadvansys: use host_reset
2015-05-25 Christoph Hellwigvirtio_scsi: don't select CONFIG_BLK_DEV_INTEGRITY
2015-05-25 John Soni Josebe2iscsi : Bump the driver version
2015-05-25 John Soni Josebe2iscsi : Logout of FW Boot Session
2015-05-25 John Soni Josebe2iscsi : Fix memory check before unmapping.
2015-05-25 John Soni Josebe2iscsi : Fix memory leak in the unload path
2015-05-25 John Soni Josebe2iscsi : Fix the PCI request region reserving.
2015-05-25 John Soni Josebe2iscsi : Fix the retry count for boot targets
2015-05-25 Christoph Hellwigmegaraid_sas : swap whole register in megasas_register_aen
2015-05-25 Christoph Hellwigmegaraid_sas : fix megasas_fire_cmd_fusion calling...
2015-05-25 Christoph Hellwigmegaraid_sas : add missing byte swaps to the sriov...
next