platform/adaptation/renesas_rcar/renesas_kernel.git
2012-01-27 Mark BrownARM: S3C64XX: Use IN4 DC measurement mode on Tobermory
2012-01-27 Axel LinASoC: Set idle_bias_off flag in snd_soc_codec_driver
2012-01-26 Mark BrownASoC: wm8994: Report any low impedance accessory as...
2012-01-26 Mark BrownASoC: wm8996: Handle failures to determine accessory...
2012-01-26 Mark BrownASoC: wm5100: Use pm_runtime for powerdown managment
2012-01-26 Mark BrownASoC: wm5100: Convert to devm_regulator_bulk_get()
2012-01-26 Mark BrownASoC: dapm: Ignore isolated signal generators for power...
2012-01-26 Mark BrownASoC: dapm: Drop runtime PM references asynchronously
2012-01-26 Mark BrownASoC: wm2200: Add WM2200 CODEC driver
2012-01-26 Mark BrownASoC: wm5100: Move regulator supplies over to DAPM...
2012-01-26 Mark BrownASoC: Provide REGULATOR_SUPPLY widget type
2012-01-26 Mark BrownMerge tag 'topic/devm' of git://git./linux/kernel/git...
2012-01-25 Peter UjfalusiASoC: soc-pcm: msbits constraint: Drop 8 and 16 bit...
2012-01-24 Mark BrownASoC: wm8962: Optimise power consumption for IN4 DC...
2012-01-24 Mark BrownASoC: wm5100: Fix warnings from recent patches
2012-01-24 Mark BrownASoC: Convert the WM5100 revision A updates to a regmap...
2012-01-24 Mark BrownMerge tag 'regmap-patch-initial' of git://git./linux...
2012-01-24 Mark BrownASoC: wm5100: Fix mismerge of IRQ frees
2012-01-24 Mark BrownASoC: Convert WM8731 to direct regmap API usage
2012-01-23 Mark Brownregmap: Support register patch sets
2012-01-23 Axel LinASoC: Add __devinit/__devexit annotations at necessary...
2012-01-23 Mark BrownASoC: sgtl5000: It's sgtl5000 not sgtl500
2012-01-22 Fabio EstevamASoC: sgtl5000: Convert to table based DAPM and control...
2012-01-22 Mark Brownregulator: Provide devm_regulator_bulk_get()
2012-01-22 Mark Brownregulator: Implement devm_regulator_free()
2012-01-21 Mark BrownASoC: wm8988: Convert to devm_kzalloc()
2012-01-21 Mark BrownASoC: wm8988: Convert to table based DAPM and control...
2012-01-21 Mark BrownASoC: wm8985: Convert to direct regmap API usage
2012-01-21 Mark BrownASoC: wm8985 Don't directly reference the cache data...
2012-01-21 Mark BrownASoC: wm8985: Use standard cache sync implementation
2012-01-21 Mark BrownASoC: wm8985: Convert to table based DAPM and control...
2012-01-21 Mark BrownASoC: wm8985: Convert to devm_kzalloc()
2012-01-21 Javier MartinASoC: Add external amplifier controls for Visstrim_M10.
2012-01-21 Mark BrownASoC: Fix build of tlv320dac33
2012-01-21 Mark BrownASoC: Use regmap update bits operation for drivers...
2012-01-21 Mark BrownASoC: Don't tell applications about msbits unless we...
2012-01-20 Mark BrownASoC: Push WM5100 interrupt request into I2C probe
2012-01-20 Mark BrownASoC: Make WM5100 interrupt path use regmap directly
2012-01-20 Mark BrownASoC: Remove redundant set_bias_level() from WM5100...
2012-01-20 Peter UjfalusiASoC: omap-mcpdm: Set 24msbits constraint
2012-01-20 Peter UjfalusiASoC: omap-dmic: Use core to set the msbits constraint
2012-01-20 Peter UjfalusiASoC: twl4030: Use core to set the msbits constraint
2012-01-20 Peter UjfalusiASoC: tlv320dac33: Use core to set the msbits constraint
2012-01-20 Fabio EstevamASoC: sgtl5000: Print revision number in hex
2012-01-20 Mark BrownASoC: Say we can't read WM5100 ID register
2012-01-20 Mark BrownASoC: When releasing WM5100 put /RESET into reset
2012-01-20 Mark BrownASoC: 24 bits are significant on wm_hubs DAIs
2012-01-20 Mark BrownASoC: Make WM8993 I2C usage unconditional
2012-01-20 Mark BrownASoC: Implement basic WM8993 interrupt support
2012-01-20 Mark BrownASoC: 24 bits are significant on the WM8996 audio inter...
2012-01-20 Mark BrownASoC: Allow drivers to specify how many bits are signif...
2012-01-20 Mark BrownASoC: Add WM8962 DAC and ADC L/R swap support
2012-01-20 Dimitris PapastamosASoC: wm8983: Remove useless snd_kcontrol
2012-01-20 Axel LinASoC: jz4740: Convert qi_lb60 to use snd_soc_register_c...
2012-01-20 Mark BrownASoC: Convert WM8962 register access map to modern...
2012-01-20 Javier MartinASoC: Route Mic Bias in Visstrim_M10 board.
2012-01-20 Ryan Mallonep93xx: Don't use system controller defines in audio...
2012-01-20 Mark BrownASoC: Make WM8962 I2C usage unconditional
2012-01-20 Manjunath HadliASoC: CQ93VC: remove machine specific header file inclu...
2012-01-20 Liam GirdwoodASoC: utils - Add support for a dummy codec driver.
2012-01-20 Liam GirdwoodASoC: twl6040 - add method to query HS DC offset step...
2012-01-20 Mark BrownASoC: Optimise performance of WM8904 ADC 128fs OSR...
2012-01-20 Liam GirdwoodASoC: core - Improve card registration error messaging...
2012-01-20 Joachim EastwoodASoC: replace 0xffffffff with DMA_BIT_MASK macro
2012-01-20 Joachim EastwoodASoC: use proper defines for stream directions in pcm...
2012-01-20 Mark BrownASoC: Convert WM8955 to table based DAPM and control...
2012-01-20 Mark BrownASoC: Convert WM8955 to direct regmap API usage
2012-01-20 Mark BrownASoC: Use standard register cache sync for WM8955
2012-01-20 Mark BrownASoC: Convert WM8955 to devm_kzalloc()
2012-01-20 Mark BrownASoC: Make I2C usage unconditional in WM8955
2012-01-20 Mark BrownASoC: Convert WM8940 to devm_kzalloc()
2012-01-20 Mark BrownASoC: Make I2C usage unconditional in WM8940
2012-01-20 Mark BrownASoC: Convert WM8904 to direct regmap API usage
2012-01-20 Mark BrownASoC: Use standard cache sync for WM8904
2012-01-20 Mark BrownASoC: Convert wm8904 to devm_kzalloc()
2012-01-20 Mark BrownASoC: Make WM8904 I2C usage unconditional
2012-01-20 Mark BrownASoC: Convert wm8804 to direct regmap API usage
2012-01-20 Mark BrownASoC: Convert wm8804 to devm_kzalloc()
2012-01-20 Mark BrownASoC: Use standard cache sync for wm8804
2012-01-20 Mark BrownASoC: Remove wm8974 private data
2012-01-20 Mark BrownASoC: Convert wm8974 to table based DAPM and control...
2012-01-20 Mark BrownASoC: Make wm8974 I2C usage unconditional
2012-01-20 Mark BrownASoC: Convert wm8971 to devm_kzalloc()
2012-01-20 Mark BrownASoC: Convert wm8971 to table based DAPM and control...
2012-01-20 Mark BrownASoC: Make WM8971 I2C usage unconditional
2012-01-20 Mark BrownASoC: Convert WM8753 to direct regmap API usage
2012-01-20 Mark BrownASoC: Move WM8993 resource acquisition and device reset...
2012-01-20 Mark BrownASoC: Convert wm8993 to direct regmap API usage
2012-01-20 Mark BrownASoC: Move WM9090 device identification and reset to...
2012-01-20 Mark BrownASoC: Convert WM9090 to use regmap directly
2012-01-20 Mark BrownASoC: Push wm8978 reset down into the I2C probe
2012-01-20 Mark BrownASoC: Convert wm8978 to direct regmap API usage
2012-01-20 Mark BrownASoC: Use standard cache sync for WM8978
2012-01-20 Mark BrownASoC: Convert wm8978 to devm_kzalloc()
2012-01-20 Mark BrownASoC: Convert wm8978 to table based DAPM and control...
2012-01-20 Mark BrownASoC: Remove unused control type from wm8978 driver
2012-01-20 Mark BrownASoC: Make WM8978 I2C usage unconditional
2012-01-20 Mark BrownASoC: Disable register synchronisation for low frequenc...
2012-01-20 Mark BrownASoC: Don't go through cache when applying WM5100 rev...
2012-01-20 Mark BrownASoC: Mark WM5100 register map cache only when going...
next