platform/kernel/u-boot.git
2017-04-07 Jaehoon Chungconfigs: trats2: enable CONFIG_DM_I2C_GPIO
2017-04-07 Jaehoon Chungboard: samsung: trats2: remove the board_i2c_init(...
2017-04-07 Jaehoon Chungarm: dts: trats2: add the i2c-gpio nodes
2017-04-03 Jaehoon Chungodroid: dts: change the buck8 min-microvolt value
2017-04-03 Jaehoon Chungconfigs: trats: enable the CONFIG_DM_I2C_GPIO
2017-04-03 Jaehoon Chungboard: samsung: trats: remove the i2c_init function
2017-04-03 Jaehoon Chungarm: dts: trats: add i2c_fg node for fuelgauge
2017-04-03 Jaehoon Chungboard: samsung: trats: convert to driver model for...
2017-04-03 Jaehoon Chungboard: samsung: trats: remove the unnecessary codes
2017-04-03 Jaehoon Chungconfigs: trats: enable the CONFIG_DM_PMIC and PMIC_MAX8997
2017-03-24 Tom RiniMerge git://git.denx.de/u-boot-arc
2017-03-24 Vlad Zakharovarc: use timer driver for ARC boards
2017-03-24 Vlad Zakharovarc: dts: separate single axs10x.dts file
2017-03-24 Tom RiniMerge git://www.denx.de/git/u-boot-marvell
2017-03-24 Vlad Zakharovdrivers: timer: Introduce ARC timer driver
2017-03-23 Tom RiniMerge git://git.denx.de/u-boot-dm
2017-03-23 Dirk Eibacharm: mvebu: Add gdsys ControlCenter-Compact board
2017-03-23 mario.six@gdsys.ccdm: Add callback to modify the device tree
2017-03-23 Stefan Roesearm: mvebu: theadorable: Add 'pcie' test command
2017-03-23 Stefan Roesearm: mvebu: theadorable: Add board-specific PEX detecti...
2017-03-23 Stefan Roesearm: mvebu: AXP: Add possiblity to configure PEX detect...
2017-03-23 Konstantin... arm64: a37xx: Remove DM_I2C_COMPAT from the board config
2017-03-23 Konstantin... arm64: a37xx: Disable DB configurations on ESPRESSOBin...
2017-03-23 Konstantin... arm64: mvebu: Add default config for ESPRESSOBin board
2017-03-23 Konstantin... arm64: dts: Add device tree for ESPRESSOBin board
2017-03-23 Konstantin... mvebu: a37xx: Add init for ESPRESSBin Topaz switch
2017-03-23 Konstantin... mvebu: neta: a37xx: Add fixed link support to neta...
2017-03-23 Konstantin... mvebu: neta: Add support for board init function
2017-03-23 Konstantin... arm64: a37xx: Handle pin controls in early board init
2017-03-23 Konstantin... arm64: a37xx: dts: Add pin control nodes to DT
2017-03-23 Konstantin... arm64: a37xx: Enable bubt command support on A3720-DB
2017-03-23 Konstantin... arm64: a37xx: Enable Marvell ETH PHY support
2017-03-23 Konstantin... arm64: mvebu: Rename the db-88f3720 to armada-37xx...
2017-03-23 Konstantin... mvebu: usb: xhci: Add VBUS regulator supply to the...
2017-03-23 Konstantin... arm64: mvebu: Add default configuraton for MACCHIATOBin...
2017-03-23 Rabeeh Khouryarm64: mvebu: dts: Add DTS file for MACCHIATOBin board
2017-03-23 Konstantin... mvebu: pcie: Add support for GPIO reset for PCIe device
2017-03-23 Konstantin... arm64: mvebu: dts: Add i2c1 pin definitions to CPM
2017-03-23 Konstantin... arm64: mvebu: gpio: Add GPIO nodes to A8K family devices
2017-03-22 Philipp Tomsichdtoc: make ScanTree recurse into subnodes
2017-03-22 Jean-Jacques... drivers: ti_qspi: use syscon to get the address ctrl_mo...
2017-03-22 Jean-Jacques... regmap: use fdt address translation
2017-03-22 Lokesh Vutladm: core: Fix Handling of global_data moving in SPL
2017-03-21 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mmc
2017-03-21 Stefan Roesemmc: xenon_sdhci: Add missing host->max_clk to Xenon...
2017-03-21 Xu Ziyuanmmc: drop unnecessary send_status request
2017-03-21 Kevin Liummc: sdhci: only flush cache for data command
2017-03-21 Felipe Balbimmc: tangier: Add Intel Tangier eMMC/SDHCI driver
2017-03-21 Felipe Balbimmc: pci: Add CONFIG_MMC_PCI
2017-03-21 Lokesh Vutlaconfigs: am43xx_evm: Enable SPL_DM
2017-03-21 Lokesh VutlaARM: AM43xx: Enable DM_I2C/SPI/ETH
2017-03-21 Lokesh VutlaARM: dts: am43xx: Add u-boot specific dtsi
2017-03-21 Lokesh Vutlaconfigs: dra7xx_evm: Enable SPL_DM
2017-03-21 Lokesh Vutlaconfigs: am57xx_evm: Enable SPL_DM
2017-03-21 Lokesh VutlaARM: dts: OMAP5+: Add u-boot specific dtsi
2017-03-21 Lokesh VutlaARM: OMAP2+: define _image_binary_end to fix SPL_OF_CONTROL
2017-03-21 Tom Rinispl: Correct call to spl_common_init() with SPL_STACK_R...
2017-03-20 Jon Masonboard: ns2: Add support for Broadcom Northstar 2
2017-03-20 ahaslam@baylibre.comda850: Add instructions to copy AIS image to NAND
2017-03-20 Max FilippovPass empty CFLAGS on invocation of libfdt/setup.py
2017-03-20 George McCollisterKconfig: Don't use RSA_FREESCALE_EXP on IMX
2017-03-20 Tero KristoARM: am43xx: fix SOC revision print outs
2017-03-20 Robert P. J... test-fit.py: Minor grammar/spelling/clarification tweaks
2017-03-20 Philipp Tomsichpart_efi: document device-tree binding for part_efi...
2017-03-20 Philipp Tomsichdoc: move documentation for /config node into a separat...
2017-03-20 Philipp Tomsichpart_efi: support padding between the GPT header and...
2017-03-20 Roger Quadrosnet: don't override ethernet address environment
2017-03-20 Roger QuadrosARM: k2g: setup PRU ethernet MAC addresses
2017-03-20 Roger QuadrosARM: Use Kconfig for board EEPROM's I2C bus and chip...
2017-03-20 Nishanth Menonboard: ti: am57xx-idk: Auto detect LCD Panel
2017-03-20 Roger Quadrosboard: ti: am571x-idk: Update pinmux for ICSS2 Ethernet
2017-03-20 Roger Quadrosboard: ti: am571x-idk: Support 6 port Ethernet or 4...
2017-03-20 Roger Quadrosti: common: board_detect: commodify ethaddr environment...
2017-03-20 Franklin S... ti_armv7_keystone2: Define scratch space in SRAM
2017-03-20 Lokesh Vutlati: common: board_detect: Rename EEPROM scratch start...
2017-03-20 Roger QuadrosARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro
2017-03-20 Tom Rinitravis-ci: Re-work i.MX6 jobs, clarify Freescale and...
2017-03-20 Jean-Jacques... ti: boot: Register the MMC controllers in SPL in the...
2017-03-19 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-imx
2017-03-19 Philipp TomsichKconfig: Migrate CONFIG_BAUDRATE
2017-03-19 Tim Harveyimx: ventana: add EMMC configuration
2017-03-19 Peng Fantools: imximage: add set bit command
2017-03-19 Stefan AgnerARM: vf610: move to standard arch/board approach
2017-03-19 Tim Harveyimx: ventana: make SD3_VSELECT board specific
2017-03-19 Tim Harveyimx: ventana: make OTG VBUS power enable board specific
2017-03-19 Tim Harveyimx: ventana: fix hwconfig
2017-03-19 Tim Harveyimx: ventana: change name of rs232_en to indicate polarity
2017-03-19 Tim Harveyimx: ventana: use mmc_root in boot scripts
2017-03-19 Tim Harveyimx: ventana: move mmc_init to common
2017-03-19 Tim Harveyimx: ventana: config: add gzwrite support
2017-03-19 Tim Harveyimx: ventana: add additional DRAM configurations
2017-03-19 Stefan Agnercolibri_imx7: split and resize firmware MTD partition
2017-03-19 Stefan Agnercolibri_imx7: use device-tree for MTD partitions
2017-03-19 Stefan Agnercolibri_imx7: setup PMIC sleep mode configuration
2017-03-19 Stefan Agnercolibri_imx7: implement board level USB PHY mode
2017-03-19 Stefan Agnercolibri_imx7/colibri_imx6/apalis_imx6: limit bootm...
2017-03-19 Stefan Agnertoradex apalis/colibri: add device tree overlay support
2017-03-19 Stefan Agnertoradex apalis/colibri: use common USB product id fallback
2017-03-19 Fabio Estevammx7: Add 1.2GHz speed grade entry
2017-03-19 Fabio Estevammx7: Fix the get_cpu_speed_grade_hz() return values
next