platform/kernel/u-boot.git
2013-11-01 Masahiro Yamadax86: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadanios2: convert makefiles to Kbuild style
2013-11-01 Masahiro Yamadands32: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadamips: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadamicroblaze: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaopenrisc: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaavr32: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadash: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadasparc: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadash: Do not include start.o in lib$(CPU).o
2013-10-31 Masahiro Yamadasparc: fix a link error
2013-10-31 Masahiro YamadaARM: s5pc, exynos: move Samsung ARM SoC specific code...
2013-10-31 Masahiro YamadaARM: omap: move OMAP specific code under arch/arm/
2013-10-31 Masahiro YamadaARM: tegra: move Tegra specific code under arch/arm/
2013-10-31 Masahiro Yamadafs: move some file system to fs/Makefile
2013-10-31 Masahiro Yamadadrivers: move some drivers to drivers/Makefile
2013-10-31 Masahiro YamadaMakefile: support descending down to subdirectories
2013-10-31 Masahiro Yamadaboard: ti: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadapowerpc: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadasandbox: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadadisk: convert a makefile to Kbuild style
2013-10-31 Masahiro Yamadalib: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadanet: convert a makefile to Kbuild style
2013-10-31 Masahiro Yamadacommon: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadafs: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadadrivers: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadadrivers: usb: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadadrivers: mtd: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadadrivers: net: convert makefiles to Kbuild style
2013-10-31 Masahiro YamadaARM: imx-common: convert makefiles to Kbuild style
2013-10-31 Masahiro YamadaARM: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaarm720t: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaarm920t: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaarm926ejs: convert makefiles to Kbuild style
2013-10-31 Masahiro Yamadaarmv7: convert makefiles to Kbuild style
2013-10-31 Masahiro YamadaMakefile: prepare for using Kbuild-style Makefile
2013-10-31 Tom Rininand_util.c: Correct licensing
2013-10-31 Haijun.Zhangpowerpc/esdhc: Add 3.3v voltage support in esdhc capaci...
2013-10-31 Haijun.Zhangesdhc: memset mmc struct before putting into use
2013-10-31 Haijun.ZhangPowerpc/esdhc: Add simple description of esdhc register
2013-10-31 Haijun.Zhangpowerpc/esdhc: Map register for eSDHC Host Controller...
2013-10-31 Rajeshwari... DWMMC: SMDK5420: Disable SMU for eMMC
2013-10-31 Przemyslaw... mmc: sdhci: Avoid commands errors by simple timeout...
2013-10-31 Jaehoon Chungmmc: dw_mmc: change the callback function name.
2013-10-31 Oliver Metzmmc: Fix erase_grp_size for partitioned card
2013-10-30 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-video
2013-10-30 Heiko Schochervideo, formike: change tag/val write
2013-10-30 Heiko Schochervideo, cfb_console: make background and foreground...
2013-10-30 Fabio Estevamvideo: ipu_disp: Fix clock polarity logic
2013-10-24 Valentin Longchampmpc85xx: introduce the kmp204x reference design support
2013-10-24 Valentin Longchampfsl/mpc85xx: define common serdes_clock_to_string function
2013-10-24 Valentin Longchampmtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option...
2013-10-24 Valentin Longchampnet/fman: add a fm_enable_port function
2013-10-24 Valentin Longchampmpc8xxx: set x2 DDR3 refresh rate if SPD config requires it
2013-10-24 Valentin Longchampmpc8xxx: call i2c_set_bus_num in __get_spd
2013-10-24 Valentin LongchampKM: add CONFIG_KM_COMMON_ETH_INIT for km common eth...
2013-10-24 Valentin LongchampKM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned...
2013-10-24 Valentin LongchampKM: fix typo in default environment
2013-10-24 Valentin Longchampkm-powerpc: move SYS_MALLOC_LEN out of keymile-common.h
2013-10-24 Valentin Longchamppowerpc: cast bi_memsize to ulong for %ld usage
2013-10-24 ramneek mehreshpowerpc/usb:Differentiate USB controller base address
2013-10-24 ramneek mehreshpowerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT...
2013-10-24 Po Liupowerpc/c29xpcie: add DDR ECC on off config setting
2013-10-22 Troy Kiskyusb: rename board_usb_init_type to usb_init_type
2013-10-22 Nobuhiro Iwamatsuarm: rmobile: armadillo-800eva: Change clock definition...
2013-10-22 Nobuhiro Iwamatsuarm: rmobile: kzm9g: Change clock definition of SCIF...
2013-10-22 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2013-10-21 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-usb
2013-10-20 Troy Kiskyusb: udc: add udc.h include file
2013-10-20 Troy Kiskyusb: gadget: mv_udc: split mv_udc.h file
2013-10-20 Troy Kiskyusb: gadget: mv_udc: optimize ep_enable
2013-10-20 Troy Kiskyusb: gadget: mv_udc: optimize bounce
2013-10-20 Troy Kiskyusb: gadget: mv_udc: fix full speed connections
2013-10-20 Troy Kiskyusb: ehci-mx6: add support for otg port
2013-10-20 Troy Kiskyusb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROL...
2013-10-20 Troy Kiskyusb: ehci-hcd: add enum usb_init_type parameter to...
2013-10-20 Troy Kiskyusb: add enum usb_init_type parameter to usb_lowlevel_init
2013-10-20 Troy Kiskyusb: rename board_usb_init_type to usb_init_type
2013-10-20 Dan MurphyARM: omap5-evm: Move MAC creation to misc_init
2013-10-20 Dan Murphyusb: am437x: Add support for am437x xhci USB host
2013-10-20 Dan Murphyusb: dra7xx: Add support for dra7xx xhci USB host
2013-10-20 Dan Murphyusb: omap: Move the usb phy code to the usb/phy directory
2013-10-20 Dan Murphyusb: omap5: Update the board_usb_init api
2013-10-20 Dan Murphyusb: omap: Move the xhci-omap header file to common...
2013-10-20 Lukasz Majewskitrats: Update TRATS config to support TIZEN download
2013-10-20 Lukasz Majewskisamsung:common:thor: Define common Samsung code to...
2013-10-20 Lukasz Majewskicmd:thor: Support for TIZEN's download command (thordown)
2013-10-20 Lukasz Majewskiusb:g_dnl: Support for TIZEN's THOR function in generic...
2013-10-20 Lukasz Majewskiusb:g_dnl:f_thor: USB download function to support...
2013-10-20 Lukasz Majewskiusb:g_dnl: Add name parameter to g_dnl_bind_fixup function
2013-10-20 Lukasz Majewskiusb:g_dnl: Replace static usb_configuration structure...
2013-10-20 Lukasz Majewskidfu:core: Export dfu_{get|free}_buf functions
2013-10-20 Lukasz Majewskidfu:core: Find DFU alt setting number by passing its...
2013-10-20 Lukasz Majewskiusb:udc:s3c: Reduce dcache invalidate range for UDC...
2013-10-20 Suriyan Ramasamiusb:smsx95xx LED activity for USB net driver
2013-10-20 Mateusz Zalegausb: new board-specific USB init interface
2013-10-20 Troy Kiskynitrogen6x: add CONFIG_MV_UDC
2013-10-20 Troy Kiskynitrogen6x: add otg usb host/device mode support
2013-10-20 Troy Kiskymx6: iomux: add GPR1 defines for use with nitrogen6x
2013-10-20 Troy Kiskyusb: gadget: mv_udc: clear desc upon ep_disable
next