platform/kernel/u-boot.git
2012-05-15 SRICHARAN ROMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maint...
2012-05-15 Tom RiniARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MM...
2012-05-15 Tom RiniARM: omap3: Set SPL stack size to 8KB, image to 54KB.
2012-05-15 Matt Porterarm, omap3: fix warm reset serial output on OMAP36xx...
2012-05-15 Jon HunterOMAP4: Set fdt_high for OMAP4 devices to enable booting...
2012-05-15 Tero Kristoomap4: do not enable auxiliary cores
2012-05-15 Tero Kristoomap4: do not enable fs-usb module
2012-05-15 Tero Kristoomap4: panda: disable uart2 pads during boot
2012-05-15 Enric Balletbo... igep00x0: change mpurate from 500 to auto
2012-05-15 Enric Balletbo... igep00x0: enable the use of a plain text file
2012-05-15 Lucas Stachtegra2: trivially enable 13 mhz crystal frequency
2012-05-15 Simon Glasstegra: Enable keyboard for Seaboard
2012-05-15 Simon Glasstegra: Switch on console mux and use environment for...
2012-05-15 Rakesh Iyertegra: Add tegra keyboard driver
2012-05-15 Anton Stafftegra: fdt: Add keyboard definitions for Seaboard
2012-05-15 Anton Stafftegra: fdt: Add keyboard controller definition
2012-05-15 Simon Glasstegra: Add keyboard support to funcmux
2012-05-15 Bernie Thompsoninput: Add support for keyboard matrix decoding from...
2012-05-15 Simon Glassinput: Add generic keyboard input handler
2012-05-15 Simon Glassinput: Add linux/input.h for key code support
2012-05-15 Anton Stafffdt: Add fdtdec functions to read byte array
2012-05-15 Simon Glasstegra: Enable LP0 on Seaboard
2012-05-15 Simon Glasstegra: fdt: Add EMC data for Tegra2 Seaboard
2012-05-15 Simon Glasstegra: i2c: Add function to find DVC bus
2012-05-15 Simon Glassfdt: tegra: Add EMC node to device tree
2012-05-15 Jimmy Zhangtegra: Add EMC settings for Seaboard
2012-05-15 Wei Nitegra: Turn off power detect in board init
2012-05-15 Simon Glasstegra: Set up warmboot code on Nvidia boards
2012-05-15 Yen Lintegra: Setup PMC scratch info from ap20 setup
2012-05-15 Yen Lintegra: Add warmboot implementation
2012-05-15 Simon Glasstegra: Set up PMU for Nvidia boards
2012-05-15 Jimmy Zhangtegra: Add PMU to manage power supplies
2012-05-15 Jimmy Zhangtegra: Add EMC support for optimal memory timings
2012-05-15 Simon Glasstegra: Add header file for APB_MISC register
2012-05-15 Simon Glasstegra: Add tegra_get_chip_type() to detect SKU
2012-05-15 Yen Lintegra: Add flow, gp_padctl, fuse, sdram headers
2012-05-15 Yen Lintegra: Add crypto library for warmboot code
2012-05-15 Simon Glasstegra: Add functions to access low-level Osc/PLL details
2012-05-15 Simon Glasstegra: Move ap20.h header into arch location
2012-05-15 Yen LinAdd AES crypto library
2012-05-15 Simon Glassi2c: Add TPS6586X driver
2012-05-15 Simon GlassAdd abs() macro to return absolute value
2012-05-15 Simon Glassfdt: Add function to return next compatible subnode
2012-05-15 Simon Glassfdt: Add function to locate an array in the device...
2012-05-15 Marek Vasuti.MX28: Avoid redefining serial_put[cs]()
2012-05-15 Marek Vasuti.MX28: Check if WP detection is implemented at all
2012-05-15 Marek Vasuti.MX28: Add battery boot components to SPL
2012-05-15 Marek Vasuti.MX28: Reorder battery status functions in SPL
2012-05-15 Marek Vasuti.MX28: Add LRADC init to i.MX28 SPL
2012-05-15 Marek Vasuti.MX28: Add LRADC register definitions
2012-05-15 Marek Vasuti.MX28: Shut down the LCD controller before reset
2012-05-15 Marek Vasuti.MX28: Add LCDIF register definitions
2012-05-15 Marek Vasuti.MX28: Implement boot pads sampling and reporting
2012-05-15 Marek Vasuti.MX28: Improve passing of data from SPL to U-Boot
2012-05-15 Marek VasutM28EVK: Add SD update command
2012-05-15 Marek VasutM28EVK: Implement support for new board V2.0
2012-05-15 Marek VasutFEC: Abstract out register setup
2012-05-15 Stefano BabicMX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
2012-05-15 Marek Vasuti.MX28: Add delay after CPU bypass is cleared
2012-05-15 Fabio Estevamspi: mxs: Allow other chip selects to work
2012-05-15 Fabio Estevamspi: mxs: Introduce spi_cs_is_valid()
2012-05-15 Fabio Estevammx53loco: Remove unneeded gpio_set_value()
2012-05-15 Fabio Estevammx53loco: Add CONFIG_REVISION_TAG
2012-05-15 Fabio Estevammx53loco: Turn on VUSB regulator
2012-05-15 Fabio Estevammx53loco: Add mc34708 support and set mx53 frequency...
2012-05-15 Fabio Estevampmic: dialog: Avoid name conflicts
2012-05-15 Timo Ketolaimx: Add u-boot.imx as target for ARM9 i.MX SOCs
2012-05-15 Timo Ketolai.MX2: Include asm/types.h in arch-mx25/imx-regs.h
2012-05-15 Timo Ketolaimx: usb: There is no such register
2012-05-15 Timo Ketolai.MX25: usb: Set PORTSCx register
2012-05-15 Timo Ketolaimx: nand: Support flash based BBT
2012-05-15 Timo Ketolai.MX25: This architecture has a GPIO4 too
2012-05-15 Timo Ketolai.MX25: esdhc: Add mxc_get_clock infrastructure
2012-05-15 Eric Nelsoni.MX6: mx6q_sabrelite: add SATA bindings
2012-05-15 Eric Nelsoni.MX6: add enable_sata_clock()
2012-05-15 Dirk Behmei.MX6: Add ANATOP regulator init
2012-05-15 Lauri Hintsalamx28evk: add NAND support
2012-05-15 Wolfgang GrandeggerUSB: ehci-mx6: Fix broken IO access
2012-05-15 Marek VasutM28: Scan only first 512 MB of DRAM to avoid memory...
2012-05-15 Marek VasutRevert "i.MX28: Enable additional DRAM address bits"
2012-05-15 Marek VasutM28: Enable FDT support
2012-05-15 Fabio Estevammx53loco: Add support for 1GHz operation for DA9053...
2012-05-15 Fabio Estevammx53loco: Allow to print CPU information at a later...
2012-05-15 Fabio Estevammx5: Add clock config interface
2012-05-15 Fabio Estevamimx-common: Factor out get_ahb_clk()
2012-05-15 Eric Nelsoni.MX6Q: mx6qsabrelite: Add keypress support to alter...
2012-05-15 Fabio Estevammx31pdk: Allow booting a zImage kernel
2012-05-15 Fabio Estevammx6qarm2: Allow booting a zImage kernel
2012-05-15 Fabio Estevammx6qsabrelite: Allow booting a zImage kernel
2012-05-15 Fabio Estevammx28evk: Allow booting a zImage kernel
2012-05-15 Fabio Estevamm28evk: Allow to booting a dt kernel
2012-05-15 Fabio Estevammx28evk: Allow to booting a dt kernel
2012-05-15 Fabio Estevammx6qsabrelite: No need to set the direction for GPIO3_2...
2012-05-15 Fabio Estevampmic: Add support for the Dialog DA9053 PMIC
2012-05-15 Stefano BabicMX53: mx53loco: Add SATA support
2012-05-15 Stefano BabicMX53: Add support to ESG ima3 board
2012-05-15 Stefano BabicSATA: add driver for MX5 / MX6 SOCs
2012-05-15 Stefano BabicMX53: add function to set SATA clock to internal
2012-05-15 Stefano BabicSATA: check for return value from sata functions
2012-05-15 Stefano BabicMX5: Add definitions for SATA controller
next