platform/kernel/u-boot.git
2011-11-05 Daniel Gorsulowskiat91: defined mach-types for meesc board in board confi...
2011-11-04 Fabio Estevammx31pdk: Enable D and I caches
2011-11-04 Wolfgang Grandeggerehci-mxc: remove incorrect comment
2011-11-04 Fabio EstevamREADME: Fix supported i.MX SoC list for CONFIG_MXC_SPI
2011-11-04 Fabio Estevammx53: Turn off child clocks before reconfigure perclk_root
2011-11-04 Wolfgang Denkqong: enable support for compressed images
2011-11-04 Anatolij Gustschinimx: imx31_phycore.h: fix checkpatch warnings
2011-11-04 Fabio Estevamvision2: Remove unused get_board_rev function
2011-11-04 Fabio Estevammx53smd: Remove unused get_board_rev function
2011-11-04 Fabio Estevammx53ard: Remove unused get_board_rev function
2011-11-04 Fabio Estevammx53evk: Remove unused get_board_rev function
2011-11-04 Fabio Estevammx53evk: Add RTC support
2011-11-04 Fabio Estevammx53loco: Remove unused get_board_rev function
2011-11-04 Fabio Estevammx53evk: Remove unneeded '1' from mx53evk.h
2011-11-04 Michael JonesOMAP3: mvblx: Initial support for mvBlueLYNX-X
2011-11-04 Luca CeresoliARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH...
2011-11-04 Sanjeev Premiomap3: mem: Move comments next to definitions
2011-11-04 Sanjeev Premiomap3: mem: Clean-up whitespaces
2011-11-04 Sanjeev Premiomap3: mem: Define and use common macros
2011-11-03 Stefano BabicDavinci: ea20: added PREBOOT to configuration
2011-11-03 Stefano BabicDavinci: ea20: added I2C support
2011-11-03 Stefano BabicDavinci: ea20: added video support
2011-11-03 Stefano BabicVIDEO: davinci: add framebuffer to da8xx
2011-11-03 Stefano BabicARM: Davinci: added missing registers to hardware.h
2011-11-03 Bastian RuppertDavinci: ea20: add gpios for LCD backlight control
2011-11-03 Bastian RuppertDavinci: ea20: add gpio for keeping power on in board_l...
2011-11-03 Stefano BabicDavinci: ea20: Add default U-Boot environment
2011-11-03 Stefano BabicDavinci: ea20: Add early init to get early output from...
2011-11-03 Stefano BabicDavinci: ea20: Add NAND support
2011-11-03 Bastian RuppertDavinci: ea20: set GPIOs to hold MII-Phy in reset and...
2011-11-03 Bastian RuppertDavinci: ea20: set console on UART0
2011-11-03 Heiko Schocherarm, davinci: add cam_enc_4xx support
2011-11-03 Heiko Schocherarm926ejs, davinci: add missing spi defines for dm365
2011-11-03 Heiko Schocherarm926ejs, davinci: add cpuinfo for dm365
2011-11-03 Heiko Schocherarm, davinci: add lowlevel function for dm365 soc
2011-11-03 Heiko Schocherarm, davinci: add header files for dm365
2011-11-03 Heiko Schocherspl, nand: add 4bit HW ecc oob first nand_read_page...
2011-11-03 Heiko Schocherarm, davinci: add support for new spl framework
2011-11-03 Heiko Schocherspl: add option for adding post memory test to the...
2011-11-03 Heiko Schochernet, davinci_emac: make clock divider in MDIO control...
2011-11-03 Heiko Schocherarm, usb, davinci: make USBPHY_CTL register configurable
2011-11-03 Heiko Schocherusb, davinci: add enable_vbus() weak function
2011-11-03 Sanjeev Premiomap3evm: fix errors caused by multiple definitions
2011-11-03 Sanjeev Premiomap3evm: Add (quick) configuration for NAND only
2011-11-03 Sanjeev Premiomap3evm: Add (quick) configuration for MMC/SD only
2011-11-03 Sanjeev Premiomap3evm: move common config options to new file
2011-11-03 Sanjeev Premiomap3evm: Prepare to split configuration
2011-11-03 Sanjeev Premiomap3evm: Reorder related config options
2011-11-03 Ilya Yanokomap/spl: actually enable the console
2011-11-03 Ilya Yanokdavinci_emac: compilation fix, phy is array now
2011-11-03 Sanjeev Premiomap3evm: Set environment variable 'ethaddr'
2011-11-03 Heiko Schocherarm, arm926: fix missing symbols in NAND_SPL mode
2011-11-03 Christian Riescharm, davinci: Add function lpsc_syncreset()
2011-11-03 Heiko Schocherarm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_...
2011-11-03 Thomas Herzmannarm/km: portl2 environment address update to P1B
2011-11-03 Holger Brunckarm/km: adapt bootcounter evaluation
2011-11-03 Holger Brunckarm/km: enable jffs2 cmds
2011-11-03 Holger Brunckarm/km: trigger reconfiguration for the Xilinx FPGA
2011-11-03 Holger Brunckarm/km: add boardid and hwkey to kernel command line
2011-11-03 Valentin LongchampARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile...
2011-11-03 Simon Guinotnetspace_v2: enable I2C EEPROM support
2011-11-03 Simon Guinotnetspace_v2: fix SDRAM configuration
2011-11-03 Lei Wenarmada100: define CONFIG_SYS_CACHELINE_SIZE
2011-11-03 Lei Wenpantheon: define CONFIG_SYS_CACHELINE_SIZE
2011-11-03 Michael Wallekirkwood: define CONFIG_SYS_CACHELINE_SIZE
2011-11-03 Mike Frysingerkirkwood: drop empty asm-offsets.s file
2011-11-03 Holger Brunckarm/km/mgcoge3un: enhance "waitforne" feature
2011-11-03 Holger Brunckarm/km: add variable waitforne to mgcoge3un
2011-11-03 Ajay BhargavgplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared
2011-11-03 Anatolij GustschinARM: dreamplug: fix compilation
2011-11-03 Anatolij GustschinARM: DockStar: fix compilation
2011-11-03 Anatolij GustschinARM: netspace_v2: fix warnings
2011-11-03 Tom Riniam335x: Drop board_sysinfo struct
2011-11-03 Tom Riniam335x: Temporarily add MACH_TYPE define
2011-11-03 Łukasz Majewskimisc:pmic:samsung Enable PMIC driver at C210 Universal...
2011-11-03 Łukasz Majewskidcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p...
2011-11-03 Łukasz Majewskidcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p...
2011-11-03 Chander Kashyapsmdkv310: use macro for mmc data read function address
2011-11-03 Chander Kashyapsmdkv310: use spl framework for mmc spl
2011-11-03 Chander KashyapSMDKV310: use get_ram_size() to validate dram size
2011-11-03 Chander KashyapSMDKV310: Initialize board id using CONFIG_MACH_TYPE
2011-11-03 Angus AinslieORIGEN : use absolute paths and fix tool naming
2011-11-03 Angus AinslieORIGEN : enable device tree support
2011-11-03 Stefano BabicMX25: tx25: Fix building due to missing MACH_TYPE
2011-11-03 Helmut Raigermx31: Add board support for HALE TT-01
2011-11-03 Helmut Raigermx31: add ESD control registers
2011-11-03 Helmut Raigermx31: define pins and init for UART2 and CSPI3
2011-11-03 Stefano BabicMX35: add support for flea3 board
2011-11-03 Stefano BabicMX51: vision2: add MACH_TYPE in config file
2011-11-03 Fabio Estevamvision2: Remove unused header file
2011-11-03 Fabio Estevammx51evk: Remove unused get_board_rev function
2011-11-03 Fabio Estevammx51evk: Remove unneeded '1' from mx51evk.h
2011-11-03 Marek VasutI2C: Fix mxc_i2c.c problem on imx31_phycore
2011-11-03 Fabio Estevammx35pdk: Add RTC support
2011-11-03 Fabio Estevammx51evk: Use GPIO API for configuring the IOMUX
2011-11-03 Fabio Estevammx51evk: Add RTC support
2011-11-03 Fabio Estevamrtc: Make mc13783-rtc driver generic
2011-11-03 Fabio Estevamqong: remove unneeded IOMUX settings
2011-11-03 Fabio Estevamqong: Use mx31_set_gpr to setup USBH2 pins
2011-11-03 Fabio Estevammx31: Introduce mx31_set_gpr function
next