platform/kernel/u-boot.git
2016-01-27 Soren BrinkmannARM64: zynqmp: DT: Fix UART compatible string
2016-01-27 Punnaiah Choudary... ARM64: zynqmp: Correct the watchdog timer interrupt...
2016-01-27 Michal SimekARM64: zynqmp: Fix coding style in phy node
2016-01-27 Michal SimekARM64: zynqmp: Add initial support for the first silicon
2016-01-27 Michal SimekARM64: zynqmp: Use the same U-Boot version with/without ATF
2016-01-27 Michal SimekARM64: zynqmp: Remove incorrect link to common config...
2016-01-27 Siva Durga... ARM64: zynqmp: ep: Define minimum sdhci frequency for ep
2016-01-27 Michal SimekARM: zynq: Move spi node to aligned location
2016-01-27 Michal SimekARM: zynq: Fix defconfig for zybo
2016-01-27 Michal SimekARM: zynq: Fix all remaining zynq platform to use stdou...
2016-01-27 Michal SimekARM: zynq: Clean DTSI coding style
2016-01-27 Michal SimekARM: zynq: Move FLASH_BAR to Kconfig
2016-01-27 Michal SimekARM: zynq: Enable SPI_FLASH for zc770 xm013 platform
2016-01-27 Siva Durga... ARM: zynq: Define sys prompt for all Zynq boards
2016-01-27 Michal SimekARM: zynq: Do not select options if SPL is not enabled
2016-01-27 Michal SimekARM: zynq: Remove memory division by 2 for ECC case
2016-01-27 Siva Durga... mmc: zynq_sdhci: Added qurik to disable high speed
2016-01-27 Siva Durga... mmc: sdhci: Clear high speed if not supported
2016-01-27 Siva Durga... sdhci: zynq: Remove hardcoded value zero as min frequency
2016-01-27 Michal Simeknet: zynq: Change MDC setup for arm64
2016-01-27 Michal Simeknet: phy: ti: Enable automatic crossover mode
2016-01-27 Michal Simekserial: zynq: Fix address reading from DM
2016-01-27 Michal Simekserial: zynq: Extend compatible string list
2016-01-27 Michal Simekfpga: Fix compilation warnings
2016-01-27 Siva Durga... fpga: Add bitstream type BIT_NONE
2016-01-27 Siva Durga... fpga: xilinx: Check for substring in device ID validation
2016-01-27 Michal Simekmicroblaze: Fix board_init calling sequence
2016-01-27 Michal Simekmicroblaze: Enable HUSH via Kconfig
2016-01-27 Michal Simekmicroblaze: Read information about RAM from DT
2016-01-27 Michal Simekmicroblaze: Remove empty file - cpu.c
2016-01-27 Michal Simekmicroblaze: Move CONFIG_NETCONSOLE to Kconfig
2016-01-27 Michal Simekmicroblaze: Remove CONFIG_FIT from board file
2016-01-27 Michal Simekmicroblaze: Remove systemace from board file
2016-01-27 Michal Simekmicroblaze: Move eth configuration to Kconfig
2016-01-27 Michal Simekmicroblaze: Enable axi emac via Kconfig
2016-01-27 Michal Simeknet: emaclite: Move emaclite to Kconfig
2016-01-27 Michal Simeknet: emaclite: Let core to handle received packet
2016-01-27 Michal Simeknet: emaclite: Rename start and stop functions
2016-01-27 Michal Simeknet: emaclite: Move driver to DM
2016-01-27 Michal Simeknet: emaclite: Use indirect access in emaclite_recv
2016-01-27 Michal Simeknet: emaclite: Use indirect reg access in send
2016-01-27 Michal Simeknet: emaclite: Remove XEL_TSR_XMIT_ACTIVE_MASK flag
2016-01-27 Michal Simeknet: emaclite: Fix logic around available TX buffers
2016-01-27 Michal Simeknet: emaclite: Use indirect register access for TX...
2016-01-27 Michal Simeknet: emaclite: Use indirect register access for rx_ping...
2016-01-27 Michal Simeknet: emaclite: Use indirect register access for tx_ping...
2016-01-27 Michal Simeknet: emaclite: Convert MDIO to use register offset
2016-01-27 Michal Simeknet: emaclite: Add MDIO support to driver
2016-01-27 Michal Simeknet: emaclite: Remove ancient OF probe function
2016-01-27 Michal Simeknet: Add axi emac to Kconfig
2016-01-27 Michal Simeknet: axi_emac: Rename start, stop, write_hwaddr functions
2016-01-27 Michal Simeknet: axi_emac: Split recv from free_pkt
2016-01-27 Michal Simeknet: axi_emac: Enable access to MDIO in probe
2016-01-27 Michal Simeknet: axi_emac: Move driver to DM
2016-01-27 Michal Simeknet: axi_emac: Pass private structure where possible
2016-01-27 Michal Simeknet: axi_emac: Pass private structure to phyread/phywrite
2016-01-27 Michal Simeknet: axi_emac: Put iobase to private structure
2016-01-27 Michal Simeknet: axi_emac: Pass directly pointer to register space
2016-01-27 Michal Simeknet: axi_emac: Show phy address instead of register...
2016-01-27 Michal Simeknet: axi_emac: Fix parentheses around operand !
2016-01-27 Michal Simekmicroblaze: Enable MICREL_KSZ9021
2016-01-27 Michal Simekmicroblaze: Wire-up debug_uart in asm
2016-01-27 Michal Simekmicroblaze: Remove unused I2C macros
2016-01-27 Michal Simekmicroblaze: Enable PHYLIB via Kconfig
2016-01-27 Michal Simekmicroblaze: Do not print eth device when DM_ETH is...
2016-01-27 Michal Simekmicroblaze: Enable uart16550 DM by default
2016-01-27 Michal Simekserial: uartlite: Add uartlite to Kconfig
2016-01-27 Michal Simekserial: uartlite: Add support for debug console
2016-01-27 Michal Simekserial: uartlite: Move driver to DM
2016-01-27 Michal Simekmicroblaze: Move baudrate setting out driver selection
2016-01-27 Michal Simekmicroblaze: Remove CONSOLE_ARG
2016-01-27 Ricardo Ribalda... ppc: xilinx-ppc4xx-generic: Update xparameters.h
2016-01-27 Ricardo Ribalda... configs/xilinx-ppc440-generic: Typos and size
2016-01-27 Ricardo Ribalda... configs/xilinx-ppc405-generic: Typos and size
2016-01-27 Ricardo Ribalda... ppc: dts: Add device tree for xilix-ppc4xx-generic
2016-01-27 Ricardo Ribalda... ppc: xilinx-ppc405-generic: Cleanout header files
2016-01-27 Ricardo Ribalda... ppc: xilinx-ppc440-generic: Cleanout header files
2016-01-27 Ricardo Ribalda... ppc: ppc405: ppc405-generic_flash_defconfig
2016-01-27 Ricardo Ribalda... ppc: ppc440: ppc440-generic_flash_defconfig
2016-01-27 Ricardo Ribalda... ppc: pp440-generic: Simplify Makefile
2016-01-27 Ricardo Ribalda... ppc: pp405-generic: Simplify Makefile
2016-01-27 Ricardo Ribalda... mailaddr: Update mail address
2016-01-27 Ricardo Ribalda... .mailmap: Add all the mail alias for Ricardo Ribalda
2016-01-27 Ricardo Ribalda... xilinx-ppc440: Remove support for v5fx30teval
2016-01-27 Ricardo Ribalda... ppc: xilinx-ppc405: Remove support for fx12mm
2016-01-27 Ricardo Ribalda... ppc: xilinx-ppc440: Remove support for ml507
2016-01-26 Tom RiniMerge branch 'master' of git.denx.de/u-boot-sunxi
2016-01-26 Hans de Goedemvtwsi: Fix breakage introduced by "Fix mvtwsi not...
2016-01-26 Hans de Goedesunxi: Bananapro: Set LDO4 to 2.5V
2016-01-26 Chen-Yu Tsaisunxi: power: axp818: Enable support for ALDOs
2016-01-26 Chen-Yu Tsaisunxi: h8_homlet_v2: Drop LDO settings from defconfig
2016-01-26 Chen-Yu Tsaipower: axp818: Add support for DLDO and ELDO regulators
2016-01-26 Chen-Yu Tsaipower: axp: merge separate DLDO functions into 1
2016-01-26 Chen-Yu Tsaipower: axp818: Remove duplicate register definition...
2016-01-26 Vishnu Patekarsunxi: Add suport for A83T based Banana-pi M3 Board
2016-01-26 Vishnu Patekarsunxi: Add support for LPDDR3 for A83T
2016-01-26 Vishnu Patekarsunxi: Groundwork to support new dram type for A83T
2016-01-26 Vishnu Patekarsunxi: Redundant code cleanup from a83t dram init
2016-01-26 Chen-Yu Tsaisunxi: Enable booting non-secure and virtualization...
2016-01-26 Chen-Yu Tsaisunxi: Support PSCI ops on Allwinner H3
next