From ffe0b2ff17e1d59d33334767e07e8141de4bd5c8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Dec 2012 06:40:07 +0000 Subject: [PATCH] e1000e: Use standard #defines for PCIe Capability ASPM fields Use the standard #defines for PCIe Capability ASPM fields. Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but these are defined for the Linux ASPM interfaces, e.g., pci_disable_link_state(), and only coincidentally match the actual register bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match the register bit. Signed-off-by: Bjorn Helgaas CC: e1000-devel@lists.sourceforge.net Acked-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 05538e6..bf2c84cf 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5548,14 +5548,21 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) #else static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { + u16 aspm_ctl = 0; + + if (state & PCIE_LINK_STATE_L0S) + aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S; + if (state & PCIE_LINK_STATE_L1) + aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1; + /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ - pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state); + pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl); if (pdev->bus->self) pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL, - state); + aspm_ctl); } #endif static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state) -- 2.7.4