From ffc1f3ac180c37699b79965e04613e12b1ce31c0 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 12 Jan 2018 23:12:05 +0300 Subject: [PATCH] drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2 [ Upstream commit 8525d04ba8a6a9ecfa4bd619c988ca873a5fc2a4 ] According to the latest revision 2.00 of the R-Car Gen2 manual, the LVDS and the bias circuit must be enabled after the LVDS I/O pins are enabled, not before. Fix the Gen2 LVDS startup sequence accordingly. While at it, also fix the comment preceding the first LVDCR0 write that still talks about hardcoding the LVDS mode 0. Fixes: 90374b5c25c9 ("drm/rcar-du: Add internal LVDS encoder support") Signed-off-by: Sergei Shtylyov Reviewed-by: Laurent Pinchart Tested-by: Laurent Pinchart Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c index 9734224..6a4b8c9 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c @@ -59,11 +59,8 @@ static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds, rcar_lvds_write(lvds, LVDPLLCR, pllcr); - /* - * Select the input, hardcode mode 0, enable LVDS operation and turn - * bias circuitry on. - */ - lvdcr0 = (lvds->mode << LVDCR0_LVMD_SHIFT) | LVDCR0_BEN | LVDCR0_LVEN; + /* Select the input and set the LVDS mode. */ + lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT; if (rcrtc->index == 2) lvdcr0 |= LVDCR0_DUSEL; rcar_lvds_write(lvds, LVDCR0, lvdcr0); @@ -74,6 +71,10 @@ static void rcar_du_lvdsenc_start_gen2(struct rcar_du_lvdsenc *lvds, LVDCR1_CHSTBY_GEN2(1) | LVDCR1_CHSTBY_GEN2(0) | LVDCR1_CLKSTBY_GEN2); + /* Enable LVDS operation and turn bias circuitry on. */ + lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN; + rcar_lvds_write(lvds, LVDCR0, lvdcr0); + /* * Turn the PLL on, wait for the startup delay, and turn the output * on. -- 2.7.4