From ff80398d2a11c6e22c9aae47b3fd01a48d377552 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Dec 2019 09:07:19 -0300 Subject: [PATCH] ARM: dts: imx7: Unify temp-grade and speed-grade nodes The following warning is seen when building with W=1: arch/arm/boot/dts/imx7s.dtsi:551.39-553.7: Warning (unique_unit_address): /soc/aips-bus@30000000/ocotp-ctrl@30350000/temp-grade@10: duplicate unit-address (also used in node /soc/aips-bus@30000000/ocotp-ctrl@30350000/speed-grade@10) Since temp-grade and speed-grade point to the same node, replace them by a single one to avoid the duplicate unit-address warning. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 2 +- arch/arm/boot/dts/imx7s.dtsi | 9 ++------- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index d8acd7c..92f6d0c 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -12,7 +12,7 @@ clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; - nvmem-cells = <&cpu_speed_grade>; + nvmem-cells = <&fuse_grade>; nvmem-cell-names = "speed_grade"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 139ab9b..568d7a9 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -152,8 +152,7 @@ interrupt-parent = <&gpc>; interrupts = ; fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, - <&tempmon_temp_grade>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; }; @@ -548,11 +547,7 @@ reg = <0x3c 0x4>; }; - tempmon_temp_grade: temp-grade@10 { - reg = <0x10 0x4>; - }; - - cpu_speed_grade: speed-grade@10 { + fuse_grade: fuse-grade@10 { reg = <0x10 0x4>; }; }; -- 2.7.4