From ff1ce0571eb98b21f5a9221b2fdc3bd010840b1a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 4 Feb 2013 10:21:32 +0800 Subject: [PATCH] regulator: anatop: improve precision of delay time For cpufreq example, it takes 13 steps (25 mV for one step) to increase vddcore from 0.95 V to 1.275 V, and the time of 64 clock cycles at 24 MHz for one step is ~2.67 uS, so the total delay time would be ~34.71 uS. But the current calculation in the driver gives 39 uS. Change the formula to have the addition of 1 be the last step, so that we can get a more precise delay time. For example above, the new formula will give 35 uS. Signed-off-by: Shawn Guo Signed-off-by: Mark Brown --- drivers/regulator/anatop-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 0df9c6a..0d4a8cc 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -80,8 +80,8 @@ static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg, regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val); val = (val >> anatop_reg->delay_bit_shift) & ((1 << anatop_reg->delay_bit_width) - 1); - ret = (new_sel - old_sel) * ((LDO_RAMP_UP_UNIT_IN_CYCLES << - val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1); + ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES << + val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1; } return ret; -- 2.7.4