From fdce05bbfe171882adf53ce32e04da24276cb8cd Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 15 Sep 2005 14:53:21 +0100 Subject: [PATCH] [ARM] 2912/1: PXA Corgi: Cleanup some unneeded code Patch from Richard Purdie This patch cleans up the PXA Corgi platform code removing an unneeded static iomap, an unneeded function and some debug messages. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi.c | 57 +++++++++++++++-------------------------------- 1 file changed, 18 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 426c2bc..be37586 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -198,13 +198,10 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) { - printk(KERN_DEBUG "%s: on\n", __FUNCTION__); + if (( 1 << vdd) & p_d->ocr_mask) GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } else { - printk(KERN_DEBUG "%s: off\n", __FUNCTION__); + else GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR); - } } static int corgi_mci_get_ro(struct device *dev) @@ -259,6 +256,16 @@ static struct platform_device *devices[] __initdata = { static void __init corgi_init(void) { + /* setup sleep mode values */ + PWER = 0x00000002; + PFER = 0x00000000; + PRER = 0x00000002; + PGSR0 = 0x0158C000; + PGSR1 = 0x00FF0080; + PGSR2 = 0x0001C004; + /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ + PCFR |= PCFR_OPDE; + corgi_ssp_set_machinfo(&corgi_ssp_machinfo); pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT); @@ -285,42 +292,14 @@ static void __init fixup_corgi(struct machine_desc *desc, mi->bank[0].size = (64*1024*1024); } -static void __init corgi_init_irq(void) -{ - pxa_init_irq(); -} - -static struct map_desc corgi_io_desc[] __initdata = { -/* virtual physical length */ -/* { 0xf1000000, 0x08000000, 0x01000000, MT_DEVICE },*/ /* LCDC (readable for Qt driver) */ -/* { 0xef700000, 0x10800000, 0x00001000, MT_DEVICE },*/ /* SCOOP */ - { 0xef800000, 0x00000000, 0x00800000, MT_DEVICE }, /* Boot Flash */ -}; - -static void __init corgi_map_io(void) -{ - pxa_map_io(); - iotable_init(corgi_io_desc,ARRAY_SIZE(corgi_io_desc)); - - /* setup sleep mode values */ - PWER = 0x00000002; - PFER = 0x00000000; - PRER = 0x00000002; - PGSR0 = 0x0158C000; - PGSR1 = 0x00FF0080; - PGSR2 = 0x0001C004; - /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */ - PCFR |= PCFR_OPDE; -} - #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") .phys_ram = 0xa0000000, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -332,8 +311,8 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -345,8 +324,8 @@ MACHINE_START(HUSKY, "SHARP Husky") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, - .map_io = corgi_map_io, - .init_irq = corgi_init_irq, + .map_io = pxa_map_io, + .init_irq = pxa_init_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END -- 2.7.4