From fda7b2b097fed9f88bc93ed3de0caea87ffe778e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 17 May 2009 22:18:27 +0100 Subject: [PATCH] [ARM] S3C24XX: GPIO: Start removal of S3C24XX_GPIO_BASE The S3C24XX_GPIO_BASE makes it difficult to compress the GPIO number space, and is only used in a few places of which everything outside arch/arm/plat-s3c24xx/gpiolib.c will be removed as soon as possible. Change gpiolib.c to use the S3C2410_GPxCON register addresses as the base for each bank, thus eliminating S3C24XX_GPIO_BASE. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpiolib.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 3cbec6d..60a9f72 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -79,7 +79,7 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), + .base = S3C2410_GPACON, .pm = __gpio_pm(&s3c_gpio_pm_1bit), .chip = { .base = S3C2410_GPA0, @@ -91,7 +91,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [1] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPB0), + .base = S3C2410_GPBCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPB0, @@ -101,7 +101,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [2] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPC0), + .base = S3C2410_GPCCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPC0, @@ -111,7 +111,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [3] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPD0), + .base = S3C2410_GPDCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPD0, @@ -121,7 +121,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [4] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPE0), + .base = S3C2410_GPECON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPE0, @@ -131,7 +131,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [5] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPF0), + .base = S3C2410_GPFCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPF0, @@ -142,7 +142,7 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { }, }, [6] = { - .base = S3C24XX_GPIO_BASE(S3C2410_GPG0), + .base = S3C2410_GPGCON, .pm = __gpio_pm(&s3c_gpio_pm_2bit), .chip = { .base = S3C2410_GPG0, -- 2.7.4