From fd8f9eac9dca386f54dfeff94afd03c84ec72ca1 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 17 Nov 2013 11:13:21 +0100 Subject: [PATCH] ARM: ux500: convert Snowball SPI pin reference The SPI0 block is not at all connected to the AB8500 on the Snowball: it is connected to the external header. These pins on the header may also be used for GPIO, but let's assume that SPI is a probable usecase on the Snowball and mux in the SPI block and use these for SPI. Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-snowball.dts | 28 ++++++++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500-pins.c | 5 ----- 2 files changed, 28 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 4f5457a..744ab95 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -248,6 +248,11 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; + ssp@80002000 { + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_snowball_mode>; + }; + cpufreq-cooling { status = "okay"; }; @@ -386,6 +391,29 @@ }; }; + ssp0 { + ssp0_snowball_mode: ssp0_snowball_default { + snowball_mux { + ste,function = "ssp0"; + ste,pins = "ssp0_a_1"; + }; + snowball_cfg1 { + ste,pins = "GPIO144_B13"; /* FRM */ + ste,config = <&gpio_out_hi>; + }; + snowball_cfg2 { + ste,pins = "GPIO145_C13"; /* RXD */ + ste,config = <&in_pd>; + }; + snowball_cfg3 { + ste,pins = + "GPIO146_D13", /* TXD */ + "GPIO143_D12"; /* CLK */ + ste,config = <&out_lo>; + }; + + }; + }; }; mcde@a0350000 { diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 55da56e..0e5d268 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -19,8 +19,6 @@ /* These simply sets bias for pins */ #define BIAS(a,b) static unsigned long a[] = { b } -BIAS(pd, PIN_PULL_DOWN); - BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0)); BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1)); BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0)); @@ -299,9 +297,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = { }; static struct pinctrl_map __initdata snowball_pinmap[] = { - /* Mux in SSP0 connected to AB8500, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), /* User LED */ DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), /* Accelerometer/Magnetometer */ -- 2.7.4