From fd66c45dd51000ff444231a94ac15ccab8cffd3d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 17 Dec 2011 20:36:57 -0300 Subject: [PATCH] [media] Remove Annex A/C selection via roll-off factor Instead of using a roll-off factor, change DRX-K & friends to select the bandwidth filter and the Nyquist half roll-off via delivery system. This provides a cleaner support for Annex A/C switch. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/xc5000.c | 137 ++++++++++++----------------- drivers/media/dvb/dvb-core/dvb_frontend.c | 25 +++++- drivers/media/dvb/frontends/drxk_hard.c | 15 ++-- drivers/media/dvb/frontends/tda18271c2dd.c | 44 ++++----- include/linux/dvb/frontend.h | 2 - 5 files changed, 106 insertions(+), 117 deletions(-) diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 97ad338..5c56d3c 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -629,11 +629,13 @@ static void xc_debug_dump(struct xc5000_priv *priv) } static int xc5000_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) + struct dvb_frontend_parameters *params) { + int ret, b; struct xc5000_priv *priv = fe->tuner_priv; - int ret; - u32 bw; + u32 bw = fe->dtv_property_cache.bandwidth_hz; + u32 freq = fe->dtv_property_cache.frequency; + u32 delsys = fe->dtv_property_cache.delivery_system; if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { @@ -642,104 +644,77 @@ static int xc5000_set_params(struct dvb_frontend *fe, } } - dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); + dprintk(1, "%s() frequency=%d (Hz)\n", __func__, freq); - if (fe->ops.info.type == FE_ATSC) { - dprintk(1, "%s() ATSC\n", __func__); - switch (params->u.vsb.modulation) { - case VSB_8: - case VSB_16: - dprintk(1, "%s() VSB modulation\n", __func__); - priv->rf_mode = XC_RF_MODE_AIR; - priv->freq_hz = params->frequency - 1750000; - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; - break; - case QAM_64: - case QAM_256: - case QAM_AUTO: - dprintk(1, "%s() QAM modulation\n", __func__); - priv->rf_mode = XC_RF_MODE_CABLE; - priv->freq_hz = params->frequency - 1750000; - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; - break; - default: - return -EINVAL; - } - } else if (fe->ops.info.type == FE_OFDM) { + switch (delsys) { + case SYS_ATSC: + dprintk(1, "%s() VSB modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_AIR; + priv->freq_hz = freq - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + break; + case SYS_DVBC_ANNEX_B: + dprintk(1, "%s() QAM modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_CABLE; + priv->freq_hz = freq - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + break; + case SYS_DVBT: + case SYS_DVBT2: dprintk(1, "%s() OFDM\n", __func__); - switch (params->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: + switch (bw) { + case 6000000: priv->bandwidth = BANDWIDTH_6_MHZ; priv->video_standard = DTV6; - priv->freq_hz = params->frequency - 1750000; + priv->freq_hz = freq - 1750000; break; - case BANDWIDTH_7_MHZ: + case 7000000: priv->bandwidth = BANDWIDTH_7_MHZ; priv->video_standard = DTV7; - priv->freq_hz = params->frequency - 2250000; + priv->freq_hz = freq - 2250000; break; - case BANDWIDTH_8_MHZ: + case 8000000: priv->bandwidth = BANDWIDTH_8_MHZ; priv->video_standard = DTV8; - priv->freq_hz = params->frequency - 2750000; + priv->freq_hz = freq - 2750000; break; default: printk(KERN_ERR "xc5000 bandwidth not set!\n"); return -EINVAL; } priv->rf_mode = XC_RF_MODE_AIR; - } else if (fe->ops.info.type == FE_QAM) { - switch (params->u.qam.modulation) { - case QAM_256: - case QAM_AUTO: - case QAM_16: - case QAM_32: - case QAM_64: - case QAM_128: - dprintk(1, "%s() QAM modulation\n", __func__); - priv->rf_mode = XC_RF_MODE_CABLE; - /* - * Using a higher bandwidth at the tuner filter may - * allow inter-carrier interference. - * So, determine the minimal channel spacing, in order - * to better adjust the tuner filter. - * According with ITU-T J.83, the bandwidth is given by: - * bw = Simbol Rate * (1 + roll_off), where the roll_off - * is equal to 0.15 for Annex A, and 0.13 for annex C - */ - if (fe->dtv_property_cache.rolloff == ROLLOFF_13) - bw = (params->u.qam.symbol_rate * 113) / 100; - else - bw = (params->u.qam.symbol_rate * 115) / 100; - if (bw <= 6000000) { - priv->bandwidth = BANDWIDTH_6_MHZ; - priv->video_standard = DTV6; - priv->freq_hz = params->frequency - 1750000; - } else if (bw <= 7000000) { - priv->bandwidth = BANDWIDTH_7_MHZ; - priv->video_standard = DTV7; - priv->freq_hz = params->frequency - 2250000; - } else { - priv->bandwidth = BANDWIDTH_8_MHZ; - priv->video_standard = DTV7_8; - priv->freq_hz = params->frequency - 2750000; - } - dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__, - BANDWIDTH_6_MHZ ? 6: 8, bw); - break; - default: - dprintk(1, "%s() Unsupported QAM type\n", __func__); - return -EINVAL; + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: + dprintk(1, "%s() QAM modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_CABLE; + if (bw <= 6000000) { + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + priv->freq_hz = freq - 1750000; + b = 6; + } else if (bw <= 7000000) { + priv->bandwidth = BANDWIDTH_7_MHZ; + priv->video_standard = DTV7; + priv->freq_hz = freq - 2250000; + b = 7; + } else { + priv->bandwidth = BANDWIDTH_8_MHZ; + priv->video_standard = DTV7_8; + priv->freq_hz = freq - 2750000; + b = 8; } - } else { - printk(KERN_ERR "xc5000 modulation type not supported!\n"); + dprintk(1, "%s() Bandwidth %dMHz (%d)\n", __func__, + b, bw); + break; + default: + printk(KERN_ERR "xc5000: delivery system is not supported!\n"); return -EINVAL; } - dprintk(1, "%s() frequency=%d (compensated)\n", - __func__, priv->freq_hz); + dprintk(1, "%s() frequency=%d (compensated to %d)\n", + __func__, freq, priv->freq_hz); ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 821b225..66537b1 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1011,7 +1011,7 @@ static void dtv_property_dump(struct dtv_property *tvp) static int is_legacy_delivery_system(fe_delivery_system_t s) { - if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) || + if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_A) || (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) || (s == SYS_ATSC)) return 1; @@ -1032,8 +1032,7 @@ static void dtv_property_cache_init(struct dvb_frontend *fe, c->delivery_system = SYS_DVBS; break; case FE_QAM: - c->delivery_system = SYS_DVBC_ANNEX_AC; - c->rolloff = ROLLOFF_15; /* implied for Annex A */ + c->delivery_system = SYS_DVBC_ANNEX_A; break; case FE_OFDM: c->delivery_system = SYS_DVBT; @@ -1144,9 +1143,10 @@ static void dtv_property_legacy_params_sync(struct dvb_frontend *fe) */ static void dtv_property_adv_params_sync(struct dvb_frontend *fe) { - const struct dtv_frontend_properties *c = &fe->dtv_property_cache; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_frontend_parameters *p = &fepriv->parameters_in; + u32 rolloff = 0; p->frequency = c->frequency; p->inversion = c->inversion; @@ -1178,6 +1178,23 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe) else p->u.ofdm.bandwidth = BANDWIDTH_AUTO; } + + /* + * On DVB-C, the bandwidth is a function of roll-off and symbol rate. + * The bandwidth is required for DVB-C tuners, in order to avoid + * inter-channel noise. Instead of estimating the minimal required + * bandwidth on every single driver, calculates it here and fills + * it at the cache bandwidth parameter. + * While not officially supported, a side effect of handling it at + * the cache level is that a program could retrieve the bandwidth + * via DTV_BANDWIDTH_HZ, wich may be useful for test programs. + */ + if (c->delivery_system == SYS_DVBC_ANNEX_A) + rolloff = 115; + if (c->delivery_system == SYS_DVBC_ANNEX_C) + rolloff = 113; + if (rolloff) + c->bandwidth_hz = (c->symbol_rate * rolloff) / 100; } static void dtv_property_cache_submit(struct dvb_frontend *fe) diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 038e470..a2c8196 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -6215,6 +6215,7 @@ static int drxk_set_parameters(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct drxk_state *state = fe->demodulator_priv; + u32 delsys = fe->dtv_property_cache.delivery_system; u32 IF; dprintk(1, "\n"); @@ -6225,11 +6226,15 @@ static int drxk_set_parameters(struct dvb_frontend *fe, return -EINVAL; } - if (fe->ops.info.type == FE_QAM) { - if (fe->dtv_property_cache.rolloff == ROLLOFF_13) - state->m_itut_annex_c = true; - else - state->m_itut_annex_c = false; + switch (delsys) { + case SYS_DVBC_ANNEX_A: + state->m_itut_annex_c = false; + break; + case SYS_DVBC_ANNEX_C: + state->m_itut_annex_c = true; + break; + default: + return -EINVAL; } if (fe->ops.i2c_gate_ctrl) diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c index b66ca29..0f8e962 100644 --- a/drivers/media/dvb/frontends/tda18271c2dd.c +++ b/drivers/media/dvb/frontends/tda18271c2dd.c @@ -1130,50 +1130,44 @@ static int set_params(struct dvb_frontend *fe, struct tda_state *state = fe->tuner_priv; int status = 0; int Standard; - u32 bw; + u32 bw = fe->dtv_property_cache.bandwidth_hz; + u32 delsys = fe->dtv_property_cache.delivery_system; - state->m_Frequency = params->frequency; + state->m_Frequency = fe->dtv_property_cache.frequency; - if (fe->ops.info.type == FE_OFDM) - switch (params->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: + switch (delsys) { + case SYS_DVBT: + case SYS_DVBT2: + switch (bw) { + case 6000000: Standard = HF_DVBT_6MHZ; break; - case BANDWIDTH_7_MHZ: + case 7000000: Standard = HF_DVBT_7MHZ; break; - default: - case BANDWIDTH_8_MHZ: + case 8000000: Standard = HF_DVBT_8MHZ; break; + default: + return -EINVAL; } - else if (fe->ops.info.type == FE_QAM) { - /* - * Using a higher bandwidth at the tuner filter may - * allow inter-carrier interference. - * So, determine the minimal channel spacing, in order - * to better adjust the tuner filter. - * According with ITU-T J.83, the bandwidth is given by: - * bw = Simbol Rate * (1 + roll_off), where the roll_off - * is equal to 0.15 for Annex A, and 0.13 for annex C - */ - if (fe->dtv_property_cache.rolloff == ROLLOFF_13) - bw = (params->u.qam.symbol_rate * 113) / 100; - else - bw = (params->u.qam.symbol_rate * 115) / 100; + case SYS_DVBC_ANNEX_A: + case SYS_DVBC_ANNEX_C: if (bw <= 6000000) Standard = HF_DVBC_6MHZ; else if (bw <= 7000000) Standard = HF_DVBC_7MHZ; else Standard = HF_DVBC_8MHZ; - } else + default: return -EINVAL; + } do { - status = RFTrackingFiltersCorrection(state, params->frequency); + status = RFTrackingFiltersCorrection(state, state->m_Frequency); if (status < 0) break; - status = ChannelConfiguration(state, params->frequency, Standard); + status = ChannelConfiguration(state, state->m_Frequency, + Standard); if (status < 0) break; diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index b2a939f8..a3c7623 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -331,8 +331,6 @@ typedef enum fe_rolloff { ROLLOFF_20, ROLLOFF_25, ROLLOFF_AUTO, - ROLLOFF_15, /* DVB-C Annex A */ - ROLLOFF_13, /* DVB-C Annex C */ } fe_rolloff_t; typedef enum fe_delivery_system { -- 2.7.4