From fd580c9830316edad6f8b1d9f542563730658efe Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 30 Sep 2022 16:21:00 +0200 Subject: [PATCH] net: sfp: augment SFP parsing with phy_interface_t bitmap MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit We currently parse the SFP EEPROM to a bitmap of ethtool link modes, and then attempt to convert the link modes to a PHY interface mode. While this works at present, there are cases where this is sub-optimal. For example, where a module can operate with several different PHY interface modes. To start addressing this, arrange for the SFP EEPROM parsing to also provide a bitmap of the possible PHY interface modes. Signed-off-by: Russell King Signed-off-by: Marek Behún Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 3 +- drivers/net/phy/marvell-88x2222.c | 3 +- drivers/net/phy/marvell.c | 3 +- drivers/net/phy/marvell10g.c | 3 +- drivers/net/phy/phylink.c | 4 ++- drivers/net/phy/sfp-bus.c | 75 +++++++++++++++++++++++++++++---------- drivers/net/phy/sfp.c | 7 ++-- drivers/net/phy/sfp.h | 3 +- include/linux/sfp.h | 5 +-- 9 files changed, 78 insertions(+), 28 deletions(-) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 11ebd59..9e9adde 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -676,6 +676,7 @@ static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) struct phy_device *phydev = upstream; __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); + DECLARE_PHY_INTERFACE_MASK(interfaces); phy_interface_t iface; linkmode_zero(phy_support); @@ -686,7 +687,7 @@ static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) phylink_set(phy_support, Asym_Pause); linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support); + sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); /* Some modules support 10G modes as well as others we support. * Mask out non-supported modes so the correct interface is picked. */ diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c index f070776..fd9ad48 100644 --- a/drivers/net/phy/marvell-88x2222.c +++ b/drivers/net/phy/marvell-88x2222.c @@ -478,6 +478,7 @@ static int mv2222_config_init(struct phy_device *phydev) static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) { + DECLARE_PHY_INTERFACE_MASK(interfaces); struct phy_device *phydev = upstream; phy_interface_t sfp_interface; struct mv2222_data *priv; @@ -489,7 +490,7 @@ static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) priv = (struct mv2222_data *)phydev->priv; dev = &phydev->mdio.dev; - sfp_parse_support(phydev->sfp_bus, id, sfp_supported); + sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces); phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported); sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index a3e8107..2810f4f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -2845,6 +2845,7 @@ static int marvell_probe(struct phy_device *phydev) static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) { + DECLARE_PHY_INTERFACE_MASK(interfaces); struct phy_device *phydev = upstream; phy_interface_t interface; struct device *dev; @@ -2856,7 +2857,7 @@ static int m88e1510_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) dev = &phydev->mdio.dev; - sfp_parse_support(phydev->sfp_bus, id, supported); + sfp_parse_support(phydev->sfp_bus, id, supported, interfaces); interface = sfp_select_interface(phydev->sfp_bus, supported); dev_info(dev, "%s SFP module inserted\n", phy_modes(interface)); diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 2b7d072..05a5ed0 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -466,9 +466,10 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) { struct phy_device *phydev = upstream; __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; + DECLARE_PHY_INTERFACE_MASK(interfaces); phy_interface_t iface; - sfp_parse_support(phydev->sfp_bus, id, support); + sfp_parse_support(phydev->sfp_bus, id, support, interfaces); iface = sfp_select_interface(phydev->sfp_bus, support); if (iface != PHY_INTERFACE_MODE_10GBASER) { diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 2cf388f..b76bf8d 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -77,6 +77,7 @@ struct phylink { struct sfp_bus *sfp_bus; bool sfp_may_have_phy; + DECLARE_PHY_INTERFACE_MASK(sfp_interfaces); __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); u8 sfp_port; }; @@ -2898,7 +2899,8 @@ static int phylink_sfp_module_insert(void *upstream, ASSERT_RTNL(); linkmode_zero(support); - sfp_parse_support(pl->sfp_bus, id, support); + phy_interface_zero(pl->sfp_interfaces); + sfp_parse_support(pl->sfp_bus, id, support, pl->sfp_interfaces); pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support); /* If this module may have a PHY connecting later, defer until later */ diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 0a9099c..29e3fa8 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -139,12 +139,14 @@ EXPORT_SYMBOL_GPL(sfp_may_have_phy); * @bus: a pointer to the &struct sfp_bus structure for the sfp module * @id: a pointer to the module's &struct sfp_eeprom_id * @support: pointer to an array of unsigned long for the ethtool support mask + * @interfaces: pointer to an array of unsigned long for phy interface modes + * mask * * Parse the EEPROM identification information and derive the supported * ethtool link modes for the module. */ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, - unsigned long *support) + unsigned long *support, unsigned long *interfaces) { unsigned int br_min, br_nom, br_max; __ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, }; @@ -171,54 +173,81 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, } /* Set ethtool support from the compliance fields. */ - if (id->base.e10g_base_sr) + if (id->base.e10g_base_sr) { phylink_set(modes, 10000baseSR_Full); - if (id->base.e10g_base_lr) + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + } + if (id->base.e10g_base_lr) { phylink_set(modes, 10000baseLR_Full); - if (id->base.e10g_base_lrm) + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + } + if (id->base.e10g_base_lrm) { phylink_set(modes, 10000baseLRM_Full); - if (id->base.e10g_base_er) + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + } + if (id->base.e10g_base_er) { phylink_set(modes, 10000baseER_Full); + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + } if (id->base.e1000_base_sx || id->base.e1000_base_lx || - id->base.e1000_base_cx) + id->base.e1000_base_cx) { phylink_set(modes, 1000baseX_Full); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + } if (id->base.e1000_base_t) { phylink_set(modes, 1000baseT_Half); phylink_set(modes, 1000baseT_Full); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, interfaces); } /* 1000Base-PX or 1000Base-BX10 */ if ((id->base.e_base_px || id->base.e_base_bx10) && - br_min <= 1300 && br_max >= 1200) + br_min <= 1300 && br_max >= 1200) { phylink_set(modes, 1000baseX_Full); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + } /* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */ - if (id->base.e100_base_fx || id->base.e100_base_lx) + if (id->base.e100_base_fx || id->base.e100_base_lx) { phylink_set(modes, 100baseFX_Full); - if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) + __set_bit(PHY_INTERFACE_MODE_100BASEX, interfaces); + } + if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) { phylink_set(modes, 100baseFX_Full); + __set_bit(PHY_INTERFACE_MODE_100BASEX, interfaces); + } /* For active or passive cables, select the link modes * based on the bit rates and the cable compliance bytes. */ if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) { /* This may look odd, but some manufacturers use 12000MBd */ - if (br_min <= 12000 && br_max >= 10300) + if (br_min <= 12000 && br_max >= 10300) { phylink_set(modes, 10000baseCR_Full); - if (br_min <= 3200 && br_max >= 3100) + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + } + if (br_min <= 3200 && br_max >= 3100) { phylink_set(modes, 2500baseX_Full); - if (br_min <= 1300 && br_max >= 1200) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); + } + if (br_min <= 1300 && br_max >= 1200) { phylink_set(modes, 1000baseX_Full); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + } } if (id->base.sfp_ct_passive) { - if (id->base.passive.sff8431_app_e) + if (id->base.passive.sff8431_app_e) { phylink_set(modes, 10000baseCR_Full); + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); + } } if (id->base.sfp_ct_active) { if (id->base.active.sff8431_app_e || id->base.active.sff8431_lim) { phylink_set(modes, 10000baseCR_Full); + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); } } @@ -243,12 +272,14 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, case SFF8024_ECC_10GBASE_T_SFI: case SFF8024_ECC_10GBASE_T_SR: phylink_set(modes, 10000baseT_Full); + __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces); break; case SFF8024_ECC_5GBASE_T: phylink_set(modes, 5000baseT_Full); break; case SFF8024_ECC_2_5GBASE_T: phylink_set(modes, 2500baseT_Full); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); break; default: dev_warn(bus->sfp_dev, @@ -261,10 +292,14 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, if (id->base.fc_speed_100 || id->base.fc_speed_200 || id->base.fc_speed_400) { - if (id->base.br_nominal >= 31) + if (id->base.br_nominal >= 31) { phylink_set(modes, 2500baseX_Full); - if (id->base.br_nominal >= 12) + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); + } + if (id->base.br_nominal >= 12) { phylink_set(modes, 1000baseX_Full); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + } } /* If we haven't discovered any modes that this module supports, try @@ -277,14 +312,18 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, * 2500BASE-X, so we allow some slack here. */ if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS) && br_nom) { - if (br_min <= 1300 && br_max >= 1200) + if (br_min <= 1300 && br_max >= 1200) { phylink_set(modes, 1000baseX_Full); - if (br_min <= 3200 && br_max >= 2500) + __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces); + } + if (br_min <= 3200 && br_max >= 2500) { phylink_set(modes, 2500baseX_Full); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); + } } if (bus->sfp_quirk && bus->sfp_quirk->modes) - bus->sfp_quirk->modes(id, modes); + bus->sfp_quirk->modes(id, modes, interfaces); linkmode_or(support, support, modes); diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index cb1dbd0..b150e47 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -331,13 +331,16 @@ static void sfp_fixup_halny_gsfp(struct sfp *sfp) } static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id, - unsigned long *modes) + unsigned long *modes, + unsigned long *interfaces) { linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, modes); + __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces); } static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id, - unsigned long *modes) + unsigned long *modes, + unsigned long *interfaces) { /* Ubiquiti U-Fiber Instant module claims that support all transceiver * types including 10G Ethernet which is not truth. So clear all claimed diff --git a/drivers/net/phy/sfp.h b/drivers/net/phy/sfp.h index 7ad06dea..6cf1643 100644 --- a/drivers/net/phy/sfp.h +++ b/drivers/net/phy/sfp.h @@ -9,7 +9,8 @@ struct sfp; struct sfp_quirk { const char *vendor; const char *part; - void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes); + void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes, + unsigned long *interfaces); void (*fixup)(struct sfp *sfp); }; diff --git a/include/linux/sfp.h b/include/linux/sfp.h index 302094b..d1f3438 100644 --- a/include/linux/sfp.h +++ b/include/linux/sfp.h @@ -535,7 +535,7 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, unsigned long *support); bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id); void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, - unsigned long *support); + unsigned long *support, unsigned long *interfaces); phy_interface_t sfp_select_interface(struct sfp_bus *bus, unsigned long *link_modes); @@ -568,7 +568,8 @@ static inline bool sfp_may_have_phy(struct sfp_bus *bus, static inline void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, - unsigned long *support) + unsigned long *support, + unsigned long *interfaces) { } -- 2.7.4