From fd3074867f906aeaa44c9ce22c11ac73718e9089 Mon Sep 17 00:00:00 2001 From: Sameer Wadgaonkar Date: Fri, 30 Jun 2017 15:43:02 -0400 Subject: [PATCH] staging: unisys: visorbus: controlvmchannel.h: fixed comment formatting issues Removed comments from the right side of lines and fixed spacing in comments. Added kernel-doc like comments and cleaned up the inline comments in the structures. Signed-off-by: Sameer Wadgaonkar Signed-off-by: David Kershner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/unisys/visorbus/controlvmchannel.h | 688 +++++++++++++-------- 1 file changed, 414 insertions(+), 274 deletions(-) diff --git a/drivers/staging/unisys/visorbus/controlvmchannel.h b/drivers/staging/unisys/visorbus/controlvmchannel.h index ed045ef..5c67baf 100644 --- a/drivers/staging/unisys/visorbus/controlvmchannel.h +++ b/drivers/staging/unisys/visorbus/controlvmchannel.h @@ -1,4 +1,5 @@ -/* Copyright (C) 2010 - 2015 UNISYS CORPORATION +/* + * Copyright (C) 2010 - 2015 UNISYS CORPORATION * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -26,11 +27,12 @@ #define VISOR_CONTROLVM_CHANNEL_SIGNATURE VISOR_CHANNEL_SIGNATURE #define CONTROLVM_MESSAGE_MAX 64 -/* Must increment this whenever you insert or delete fields within - * this channel struct. Also increment whenever you change the meaning - * of fields within this channel struct so as to break pre-existing - * software. Note that you can usually add fields to the END of the - * channel struct withOUT needing to increment this. +/* + * Must increment this whenever you insert or delete fields within this channel + * struct. Also increment whenever you change the meaning of fields within this + * channel struct so as to break pre-existing software. Note that you can + * usually add fields to the END of the channel struct withOUT needing to + * increment this. */ #define VISOR_CONTROLVM_CHANNEL_VERSIONID 1 @@ -51,28 +53,31 @@ /* Max num of messages stored during IOVM creation to be reused after crash */ #define CONTROLVM_CRASHMSG_MAX 2 +/* + * struct visor_segment_state + * @enabled: May enter other states. + * @active: Assigned to active partition. + * @alive: Configure message sent to service/server. + * @revoked: Similar to partition state ShuttingDown. + * @allocated: Memory (device/port number) has been selected by Command. + * @known: Has been introduced to the service/guest partition. + * @ready: Service/Guest partition has responded to introduction. + * @operating: Resource is configured and operating. + * @reserved: Natural alignment. + * + * Note: Don't use high bit unless we need to switch to ushort which is + * non-compliant. + */ struct visor_segment_state { - /* Bit 0: May enter other states */ u16 enabled:1; - /* Bit 1: Assigned to active partition */ u16 active:1; - /* Bit 2: Configure message sent to service/server */ u16 alive:1; - /* Bit 3: similar to partition state ShuttingDown */ u16 revoked:1; - /* Bit 4: memory (device/port number) has been selected by Command */ u16 allocated:1; - /* Bit 5: has been introduced to the service/guest partition */ u16 known:1; - /* Bit 6: service/Guest partition has responded to introduction */ u16 ready:1; - /* Bit 7: resource is configured and operating */ u16 operating:1; - /* Natural alignment*/ u16 reserved:8; -/* Note: don't use high bit unless we need to switch to ushort - * which is non-compliant - */ } __packed; static const struct visor_segment_state segment_state_running = { @@ -87,74 +92,101 @@ static const struct visor_segment_state segment_state_standby = { 1, 1, 0, 0, 1, 1, 1, 0 }; -/* Ids for commands that may appear in either queue of a ControlVm channel. +/* + * enum controlvm_id + * @CONTROLVM_INVALID: + * @CONTROLVM_BUS_CREATE: CP --> SP, GP. + * @CONTROLVM_BUS_DESTROY: CP --> SP, GP. + * @CONTROLVM_BUS_CONFIGURE: CP --> SP. + * @CONTROLVM_BUS_CHANGESTATE: CP --> SP, GP. + * @CONTROLVM_BUS_CHANGESTATE_EVENT: SP, GP --> CP. + * @CONTROLVM_DEVICE_CREATE: CP --> SP, GP. + * @CONTROLVM_DEVICE_DESTROY: CP --> SP, GP. + * @CONTROLVM_DEVICE_CONFIGURE: CP --> SP. + * @CONTROLVM_DEVICE_CHANGESTATE: CP --> SP, GP. + * @CONTROLVM_DEVICE_CHANGESTATE_EVENT: SP, GP --> CP. + * @CONTROLVM_DEVICE_RECONFIGURE: CP --> Boot. + * @CONTROLVM_CHIPSET_INIT: CP --> SP, GP. + * @CONTROLVM_CHIPSET_STOP: CP --> SP, GP. + * @CONTROLVM_CHIPSET_READY: CP --> SP. + * @CONTROLVM_CHIPSET_SELFTEST: CP --> SP. + * + * Ids for commands that may appear in either queue of a ControlVm channel. * - * Commands that are initiated by the command partition (CP), by an IO or - * console service partition (SP), or by a guest partition (GP)are: - * - issued on the RequestQueue queue (q #0) in the ControlVm channel - * - responded to on the ResponseQueue queue (q #1) in the ControlVm channel + * Commands that are initiated by the command partition (CP), by an IO or + * console service partition (SP), or by a guest partition (GP) are: + * - issued on the RequestQueue queue (q #0) in the ControlVm channel + * - responded to on the ResponseQueue queue (q #1) in the ControlVm channel * - * Events that are initiated by an IO or console service partition (SP) or - * by a guest partition (GP) are: - * - issued on the EventQueue queue (q #2) in the ControlVm channel - * - responded to on the EventAckQueue queue (q #3) in the ControlVm channel + * Events that are initiated by an IO or console service partition (SP) or + * by a guest partition (GP) are: + * - issued on the EventQueue queue (q #2) in the ControlVm channel + * - responded to on the EventAckQueue queue (q #3) in the ControlVm channel */ enum controlvm_id { CONTROLVM_INVALID = 0, - /* SWITCH commands required Parameter: SwitchNumber */ - /* BUS commands required Parameter: BusNumber */ - CONTROLVM_BUS_CREATE = 0x101, /* CP --> SP, GP */ - CONTROLVM_BUS_DESTROY = 0x102, /* CP --> SP, GP */ - CONTROLVM_BUS_CONFIGURE = 0x104, /* CP --> SP */ - CONTROLVM_BUS_CHANGESTATE = 0x105, /* CP --> SP, GP */ - CONTROLVM_BUS_CHANGESTATE_EVENT = 0x106, /* SP, GP --> CP */ -/* DEVICE commands required Parameter: BusNumber, DeviceNumber */ - - CONTROLVM_DEVICE_CREATE = 0x201, /* CP --> SP, GP */ - CONTROLVM_DEVICE_DESTROY = 0x202, /* CP --> SP, GP */ - CONTROLVM_DEVICE_CONFIGURE = 0x203, /* CP --> SP */ - CONTROLVM_DEVICE_CHANGESTATE = 0x204, /* CP --> SP, GP */ - CONTROLVM_DEVICE_CHANGESTATE_EVENT = 0x205, /* SP, GP --> CP */ - CONTROLVM_DEVICE_RECONFIGURE = 0x206, /* CP --> Boot */ -/* CHIPSET commands */ - CONTROLVM_CHIPSET_INIT = 0x301, /* CP --> SP, GP */ - CONTROLVM_CHIPSET_STOP = 0x302, /* CP --> SP, GP */ - CONTROLVM_CHIPSET_READY = 0x304, /* CP --> SP */ - CONTROLVM_CHIPSET_SELFTEST = 0x305, /* CP --> SP */ - + /* + * SWITCH commands required Parameter: SwitchNumber. + * BUS commands required Parameter: BusNumber + */ + CONTROLVM_BUS_CREATE = 0x101, + CONTROLVM_BUS_DESTROY = 0x102, + CONTROLVM_BUS_CONFIGURE = 0x104, + CONTROLVM_BUS_CHANGESTATE = 0x105, + CONTROLVM_BUS_CHANGESTATE_EVENT = 0x106, + /* DEVICE commands required Parameter: BusNumber, DeviceNumber */ + CONTROLVM_DEVICE_CREATE = 0x201, + CONTROLVM_DEVICE_DESTROY = 0x202, + CONTROLVM_DEVICE_CONFIGURE = 0x203, + CONTROLVM_DEVICE_CHANGESTATE = 0x204, + CONTROLVM_DEVICE_CHANGESTATE_EVENT = 0x205, + CONTROLVM_DEVICE_RECONFIGURE = 0x206, + /* CHIPSET commands */ + CONTROLVM_CHIPSET_INIT = 0x301, + CONTROLVM_CHIPSET_STOP = 0x302, + CONTROLVM_CHIPSET_READY = 0x304, + CONTROLVM_CHIPSET_SELFTEST = 0x305, }; +/* + * struct irq_info + * @reserved1: Natural alignment purposes + * @recv_irq_handle: Specifies interrupt handle. It is used to retrieve the + * corresponding interrupt pin from Monitor; and the interrupt + * pin is used to connect to the corresponding interrupt. + * Used by IOPart-GP only. + * @recv_irq_vector: Specifies interrupt vector. It, interrupt pin, and shared + * are used to connect to the corresponding interrupt. + * Used by IOPart-GP only. + * @recv_irq_shared: Specifies if the recvInterrupt is shared. It, interrupt + * pin and vector are used to connect to 0 = not shared; + * 1 = shared the corresponding interrupt. + * Used by IOPart-GP only. + * @reserved: Natural alignment purposes + */ struct irq_info { u64 reserved1; - - /* specifies interrupt handle. It is used to retrieve the - * corresponding interrupt pin from Monitor; and the - * interrupt pin is used to connect to the corresponding - * interrupt. Used by IOPart-GP only. - */ u64 recv_irq_handle; - - /* specifies interrupt vector. It, interrupt pin, and shared are - * used to connect to the corresponding interrupt. Used by - * IOPart-GP only. - */ u32 recv_irq_vector; - - /* specifies if the recvInterrupt is shared. It, interrupt pin - * and vector are used to connect to 0 = not shared; 1 = shared. - * the corresponding interrupt. Used by IOPart-GP only. - */ u8 recv_irq_shared; - u8 reserved[3]; /* Natural alignment purposes */ + u8 reserved[3]; } __packed; +/* + * struct efi_visor_indication + * @boot_to_fw_ui: Stop in UEFI UI + * @clear_nvram: Clear NVRAM + * @clear_cmos: Clear CMOS + * @boot_to_tool: Run install tool + * @reserved: Natural alignment + */ struct efi_visor_indication { - u64 boot_to_fw_ui:1; /* Bit 0: Stop in uefi ui */ - u64 clear_nvram:1; /* Bit 1: Clear NVRAM */ - u64 clear_cmos:1; /* Bit 2: Clear CMOS */ - u64 boot_to_tool:1; /* Bit 3: Run install tool */ - /* remaining bits are available */ - u64 reserved:60; /* Natural alignment */ + u64 boot_to_fw_ui:1; + u64 clear_nvram:1; + u64 clear_cmos:1; + u64 boot_to_tool:1; + /* Remaining bits are available */ + u64 reserved:60; } __packed; enum visor_chipset_feature { @@ -162,182 +194,249 @@ enum visor_chipset_feature { VISOR_CHIPSET_FEATURE_PARA_HOTPLUG = 0x00000002, }; -/* This is the common structure that is at the beginning of every - * ControlVm message (both commands and responses) in any ControlVm - * queue. Commands are easily distinguished from responses by - * looking at the flags.response field. +/* + * struct controlvm_message_header + * @id: See CONTROLVM_ID. + * @message_size: Includes size of this struct + size of message. + * @segment_index: Index of segment containing Vm message/information. + * @completion_status: Error status code or result of message completion. + * @struct flags: + * @failed: =1 in a response to signify failure. + * @response_expected: =1 in all messages that expect a response. + * @server: =1 in all bus & device-related messages where the + * message receiver is to act as the bus or device + * server. + * @test_message: =1 for testing use only (Control and Command + * ignore this). + * @partial_completion: =1 if there are forthcoming responses/acks + * associated with this message. + * @preserve: =1 this is to let us know to preserve channel + * contents. + * @writer_in_diag: =1 the DiagWriter is active in the Diagnostic + * Partition. + * @reserve: Natural alignment. + * @reserved: Natural alignment. + * @message_handle: Identifies the particular message instance. + * @payload_vm_offset: Offset of payload area from start of this instance. + * @payload_max_bytes: Maximum bytes allocated in payload area of ControlVm + * segment. + * @payload_bytes: Actual number of bytes of payload area to copy between + * IO/Command. If non-zero, there is a payload to copy. + * + * This is the common structure that is at the beginning of every + * ControlVm message (both commands and responses) in any ControlVm + * queue. Commands are easily distinguished from responses by + * looking at the flags.response field. */ struct controlvm_message_header { - u32 id; /* See CONTROLVM_ID. */ - /* For requests, indicates the message type. */ - /* For responses, indicates the type of message we are responding to. */ - - /* Includes size of this struct + size of message */ + u32 id; + /* + * For requests, indicates the message type. For responses, indicates + * the type of message we are responding to. + */ u32 message_size; - /* Index of segment containing Vm message/information */ u32 segment_index; - /* Error status code or result of message completion */ u32 completion_status; struct { - /* =1 in a response to signify failure */ u32 failed:1; - /* =1 in all messages that expect a response */ u32 response_expected:1; - /* =1 in all bus & device-related messages where the message - * receiver is to act as the bus or device server - */ u32 server:1; - /* =1 for testing use only (Control and Command ignore this */ u32 test_message:1; - /* =1 if there are forthcoming responses/acks associated - * with this message - */ u32 partial_completion:1; - /* =1 this is to let us know to preserve channel contents */ u32 preserve:1; - /* =1 the DiagWriter is active in the Diagnostic Partition */ u32 writer_in_diag:1; - /* Natural alignment */ u32 reserve:25; } __packed flags; - /* Natural alignment */ u32 reserved; - /* Identifies the particular message instance */ u64 message_handle; - /* request instances with the corresponding response instance. */ - /* Offset of payload area from start of this instance */ u64 payload_vm_offset; - /* Maximum bytes allocated in payload area of ControlVm segment */ u32 payload_max_bytes; - /* Actual number of bytes of payload area to copy between IO/Command */ u32 payload_bytes; - /* if non-zero, there is a payload to copy. */ } __packed; +/* + * struct controlvm_packet_device_create - For CONTROLVM_DEVICE_CREATE + * @bus_no: Bus # (0..n-1) from the msg receiver's end. + * @dev_no: Bus-relative (0..n-1) device number. + * @channel_addr: Guest physical address of the channel, which can be + * dereferenced by the receiver of this ControlVm command. + * @channel_bytes: Specifies size of the channel in bytes. + * @data_type_uuid: Specifies format of data in channel. + * @dev_inst_uuid: Instance guid for the device. + * @irq_info intr: Specifies interrupt information. + */ struct controlvm_packet_device_create { - u32 bus_no; /* bus # (0..n-1) from the msg receiver's end */ - u32 dev_no; /* bus-relative (0..n-1) device number */ - /* Guest physical address of the channel, which can be dereferenced by - * the receiver of this ControlVm command - */ + u32 bus_no; + u32 dev_no; u64 channel_addr; - u64 channel_bytes; /* specifies size of the channel in bytes */ - uuid_le data_type_uuid; /* specifies format of data in channel */ - uuid_le dev_inst_uuid; /* instance guid for the device */ - struct irq_info intr; /* specifies interrupt information */ -} __packed; /* for CONTROLVM_DEVICE_CREATE */ + u64 channel_bytes; + uuid_le data_type_uuid; + uuid_le dev_inst_uuid; + struct irq_info intr; +} __packed; +/* + * struct controlvm_packet_device_configure - For CONTROLVM_DEVICE_CONFIGURE + * @bus_no: Bus number (0..n-1) from the msg receiver's perspective. + * @dev_no: Bus-relative (0..n-1) device number. + */ struct controlvm_packet_device_configure { - /* bus # (0..n-1) from the msg receiver's perspective */ u32 bus_no; - /* Control uses header SegmentIndex field to access bus number... */ - u32 dev_no; /* bus-relative (0..n-1) device number */ -} __packed; /* for CONTROLVM_DEVICE_CONFIGURE */ + /* Control uses header SegmentIndex field to access bus number. */ + u32 dev_no; +} __packed; +/* Total 128 bytes */ struct controlvm_message_device_create { struct controlvm_message_header header; struct controlvm_packet_device_create packet; -} __packed; /* total 128 bytes */ +} __packed; +/* Total 56 bytes */ struct controlvm_message_device_configure { struct controlvm_message_header header; struct controlvm_packet_device_configure packet; -} __packed; /* total 56 bytes */ +} __packed; -/* This is the format for a message in any ControlVm queue. */ +/* + * struct controlvm_message_packet - This is the format for a message in any + * ControlVm queue. + * @struct create_bus: For CONTROLVM_BUS_CREATE. + * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. + * @dev_count: Indicates the max number of devices on this bus. + * @channel_addr: Guest physical address of the channel, which can be + * dereferenced by the receiver of this ControlVM + * command. + * @channel_bytes: Size of the channel. + * @bus_data_type_uuid: Indicates format of data in bus channel. + * @bus_inst_uuid: Instance uuid for the bus. + * + * @struct destroy_bus: For CONTROLVM_BUS_DESTROY. + * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. + * @reserved: Natural alignment purposes. + * + * @struct configure_bus: For CONTROLVM_BUS_CONFIGURE. + * @bus_no: Bus # (0..n-1) from the receiver's perspective. + * @reserved1: For alignment purposes. + * @guest_handle: This is used to convert guest physical address to + * physical address. + * @recv_bus_irq_handle: Specifies interrupt info. It is used by SP to + * register to receive interrupts from the CP. This + * interrupt is used for bus level notifications. + * The corresponding sendBusInterruptHandle is kept + * in CP. + * + * @struct create_device: For CONTROLVM_DEVICE_CREATE. + * + * @struct destroy_device: For CONTROLVM_DEVICE_DESTROY. + * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. + * @dev_no: Bus-relative (0..n-1) device number. + * + * @struct configure_device: For CONTROLVM_DEVICE_CONFIGURE. + * + * @struct reconfigure_device: For CONTROLVM_DEVICE_RECONFIGURE. + * @bus_no: Bus # (0..n-1) from the msg receiver's perspective. + * @dev_no: Bus-relative (0..n-1) device number. + * + * @struct bus_change_state: For CONTROLVM_BUS_CHANGESTATE. + * @bus_no: + * @struct state: + * @reserved: Natural alignment purposes. + * + * @struct device_change_state: For CONTROLVM_DEVICE_CHANGESTATE. + * @bus_no: + * @dev_no: + * @struct state: + * @struct flags: + * @phys_device: =1 if message is for a physical device. + * @reserved: Natural alignment. + * @reserved1: Natural alignment. + * @reserved: Natural alignment purposes. + * + * @struct device_change_state_event: For CONTROLVM_DEVICE_CHANGESTATE_EVENT. + * @bus_no: + * @dev_no: + * @struct state: + * @reserved: Natural alignment purposes. + * + * @struct init_chipset: For CONTROLVM_CHIPSET_INIT. + * @bus_count: Indicates the max number of busses. + * @switch_count: Indicates the max number of switches. + * @enum features: + * @platform_number: + * + * @struct chipset_selftest: For CONTROLVM_CHIPSET_SELFTEST. + * @options: Reserved. + * @test: Bit 0 set to run embedded selftest. + * + * @addr: A physical address of something, that can be dereferenced by the + * receiver of this ControlVm command. + * + * @handle: A handle of something (depends on command id). + */ struct controlvm_message_packet { union { struct { - /* bus # (0..n-1) from the msg receiver's perspective */ u32 bus_no; - /* indicates the max number of devices on this bus */ u32 dev_count; - /* Guest physical address of the channel, which can be - * dereferenced by the receiver of this ControlVm command - */ u64 channel_addr; - u64 channel_bytes; /* size of the channel */ - /* indicates format of data in bus channel*/ + u64 channel_bytes; uuid_le bus_data_type_uuid; - uuid_le bus_inst_uuid; /* instance uuid for the bus */ - } __packed create_bus; /* for CONTROLVM_BUS_CREATE */ + uuid_le bus_inst_uuid; + } __packed create_bus; struct { - /* bus # (0..n-1) from the msg receiver's perspective */ u32 bus_no; - u32 reserved; /* Natural alignment purposes */ - } __packed destroy_bus; /* for CONTROLVM_BUS_DESTROY */ + u32 reserved; + } __packed destroy_bus; struct { - /* bus # (0..n-1) from the receiver's perspective */ u32 bus_no; - u32 reserved1; /* for alignment purposes */ - /* This is used to convert guest physical address to physical address */ + u32 reserved1; u64 guest_handle; u64 recv_bus_irq_handle; - /* specifies interrupt info. It is used by SP - * to register to receive interrupts from the - * CP. This interrupt is used for bus level - * notifications. The corresponding - * sendBusInterruptHandle is kept in CP. - */ - } __packed configure_bus; /* for CONTROLVM_BUS_CONFIGURE */ - /* for CONTROLVM_DEVICE_CREATE */ + } __packed configure_bus; struct controlvm_packet_device_create create_device; struct { - /* bus # (0..n-1) from the msg receiver's perspective */ u32 bus_no; - u32 dev_no; /* bus-relative (0..n-1) device # */ - } __packed destroy_device; /* for CONTROLVM_DEVICE_DESTROY */ - /* for CONTROLVM_DEVICE_CONFIGURE */ + u32 dev_no; + } __packed destroy_device; struct controlvm_packet_device_configure configure_device; struct { - /* bus # (0..n-1) from the msg receiver's perspective */ u32 bus_no; - u32 dev_no; /* bus-relative (0..n-1) device # */ + u32 dev_no; } __packed reconfigure_device; - /* for CONTROLVM_DEVICE_RECONFIGURE */ struct { u32 bus_no; struct visor_segment_state state; - u8 reserved[2]; /* Natural alignment purposes */ - } __packed bus_change_state; /* for CONTROLVM_BUS_CHANGESTATE */ + u8 reserved[2]; + } __packed bus_change_state; struct { u32 bus_no; u32 dev_no; struct visor_segment_state state; struct { - /* =1 if message is for a physical device */ u32 phys_device:1; - u32 reserved:31; /* Natural alignment */ - u32 reserved1; /* Natural alignment */ + u32 reserved:31; + u32 reserved1; } __packed flags; - u8 reserved[2]; /* Natural alignment purposes */ + u8 reserved[2]; } __packed device_change_state; - /* for CONTROLVM_DEVICE_CHANGESTATE */ struct { u32 bus_no; u32 dev_no; struct visor_segment_state state; - u8 reserved[6]; /* Natural alignment purposes */ + u8 reserved[6]; } __packed device_change_state_event; - /* for CONTROLVM_DEVICE_CHANGESTATE_EVENT */ struct { - /* indicates the max number of busses */ u32 bus_count; - /* indicates the max number of switches */ u32 switch_count; enum visor_chipset_feature features; - u32 platform_number; /* Platform Number */ - } __packed init_chipset; /* for CONTROLVM_CHIPSET_INIT */ + u32 platform_number; + } __packed init_chipset; struct { - u32 options; /* reserved */ - u32 test; /* bit 0 set to run embedded selftest */ + u32 options; + u32 test; } __packed chipset_selftest; - /* for CONTROLVM_CHIPSET_SELFTEST */ - /* a physical address of something, that can be dereferenced - * by the receiver of this ControlVm command - */ u64 addr; - /* a handle of something (depends on command id) */ u64 handle; }; } __packed; @@ -348,93 +447,139 @@ struct controlvm_message { struct controlvm_message_packet cmd; } __packed; +/* + * struct visor_controlvm_channel + * @struct header: + * @gp_controlvm: Guest phys addr of this channel. + * @gp_partition_tables: Guest phys addr of partition tables. + * @gp_diag_guest: Guest phys addr of diagnostic channel. + * @gp_boot_romdisk: Guest phys addr of (read* only) Boot + * ROM disk. + * @gp_boot_ramdisk: Guest phys addr of writable Boot RAM + * disk. + * @gp_acpi_table: Guest phys addr of acpi table. + * @gp_control_channel: Guest phys addr of control channel. + * @gp_diag_romdisk: Guest phys addr of diagnostic ROM disk. + * @gp_nvram: Guest phys addr of NVRAM channel. + * @request_payload_offset: Offset to request payload area. + * @event_payload_offset: Offset to event payload area. + * @request_payload_bytes: Bytes available in request payload area. + * @event_payload_bytes: Bytes available in event payload area. + * @control_channel_bytes: + * @nvram_channel_bytes: Bytes in PartitionNvram segment. + * @message_bytes: sizeof(CONTROLVM_MESSAGE). + * @message_count: CONTROLVM_MESSAGE_MAX. + * @gp_smbios_table: Guest phys addr of SMBIOS tables. + * @gp_physical_smbios_table: Guest phys addr of SMBIOS table. + * @gp_reserved: VISOR_MAX_GUESTS_PER_SERVICE. + * @virtual_guest_firmware_image_base: Guest physical address of EFI firmware + * image base. + * @virtual_guest_firmware_entry_point: Guest physical address of EFI firmware + * entry point. + * @virtual_guest_firmware_image_size: Guest EFI firmware image size. + * @virtual_guest_firmware_boot_base: GPA = 1MB where EFI firmware image is + * copied to. + * @virtual_guest_image_base: + * @virtual_guest_image_size: + * @prototype_control_channel_offset: + * @virtual_guest_partition_handle: + * @restore_action: Restore Action field to restore the + * guest partition. + * @dump_action: For Windows guests it shows if the + * visordisk is in dump mode. + * @nvram_fail_count: + * @saved_crash_message_count: = CONTROLVM_CRASHMSG_MAX. + * @saved_crash_message_offset: Offset to request payload area needed + * for crash dump. + * @installation_error: Type of error encountered during + * installation. + * @installation_text_id: Id of string to display. + * @installation_remaining_steps: Number of remaining installation steps + * (for progress bars). + * @tool_action: VISOR_TOOL_ACTIONS Installation Action + * field. + * @reserved: Alignment. + * @struct efi_visor_ind: + * @sp_reserved: + * @reserved2: Force signals to begin on 128-byte + * cache line. + * @struct request_queue: Guest partition uses this queue to send + * requests to Control. + * @struct response_queue: Control uses this queue to respond to + * service or guest partition request. + * @struct event_queue: Control uses this queue to send events + * to guest partition. + * @struct event_ack_queue: Service or guest partition uses this + * queue to ack Control events. + * @struct request_msg: Request fixed-size message pool - + * does not include payload. + * @struct response_msg: Response fixed-size message pool - + * does not include payload. + * @struct event_msg: Event fixed-size message pool - + * does not include payload. + * @struct event_ack_msg: Ack fixed-size message pool - + * does not include payload. + * @struct saved_crash_msg: Message stored during IOVM creation to + * be reused after crash. + */ struct visor_controlvm_channel { struct channel_header header; - u64 gp_controlvm; /* guest phys addr of this channel */ - u64 gp_partition_tables;/* guest phys addr of partition tables */ - u64 gp_diag_guest; /* guest phys addr of diagnostic channel */ - u64 gp_boot_romdisk;/* guest phys addr of (read* only) Boot ROM disk */ - u64 gp_boot_ramdisk;/* guest phys addr of writable Boot RAM disk */ - u64 gp_acpi_table; /* guest phys addr of acpi table */ - u64 gp_control_channel;/* guest phys addr of control channel */ - u64 gp_diag_romdisk;/* guest phys addr of diagnostic ROM disk */ - u64 gp_nvram; /* guest phys addr of NVRAM channel */ - u64 request_payload_offset; /* Offset to request payload area */ - u64 event_payload_offset; /* Offset to event payload area */ - /* Bytes available in request payload area */ + u64 gp_controlvm; + u64 gp_partition_tables; + u64 gp_diag_guest; + u64 gp_boot_romdisk; + u64 gp_boot_ramdisk; + u64 gp_acpi_table; + u64 gp_control_channel; + u64 gp_diag_romdisk; + u64 gp_nvram; + u64 request_payload_offset; + u64 event_payload_offset; u32 request_payload_bytes; - u32 event_payload_bytes;/* Bytes available in event payload area */ + u32 event_payload_bytes; u32 control_channel_bytes; - u32 nvram_channel_bytes; /* Bytes in PartitionNvram segment */ - u32 message_bytes; /* sizeof(CONTROLVM_MESSAGE) */ - u32 message_count; /* CONTROLVM_MESSAGE_MAX */ - u64 gp_smbios_table; /* guest phys addr of SMBIOS tables */ - u64 gp_physical_smbios_table; /* guest phys addr of SMBIOS table */ - /* VISOR_MAX_GUESTS_PER_SERVICE */ + u32 nvram_channel_bytes; + u32 message_bytes; + u32 message_count; + u64 gp_smbios_table; + u64 gp_physical_smbios_table; char gp_reserved[2688]; - - /* guest physical address of EFI firmware image base */ u64 virtual_guest_firmware_image_base; - - /* guest physical address of EFI firmware entry point */ u64 virtual_guest_firmware_entry_point; - - /* guest EFI firmware image size */ u64 virtual_guest_firmware_image_size; - - /* GPA = 1MB where EFI firmware image is copied to */ u64 virtual_guest_firmware_boot_base; u64 virtual_guest_image_base; u64 virtual_guest_image_size; u64 prototype_control_channel_offset; u64 virtual_guest_partition_handle; - /* Restore Action field to restore the guest partition */ u16 restore_action; - /* For Windows guests it shows if the visordisk is in dump mode */ u16 dump_action; u16 nvram_fail_count; - u16 saved_crash_message_count; /* = CONTROLVM_CRASHMSG_MAX */ - /* Offset to request payload area needed for crash dump */ + u16 saved_crash_message_count; u32 saved_crash_message_offset; - /* Type of error encountered during installation */ u32 installation_error; - u32 installation_text_id; /* Id of string to display */ - /* Number of remaining installation steps (for progress bars) */ + u32 installation_text_id; u16 installation_remaining_steps; - /* VISOR_TOOL_ACTIONS Installation Action field */ u8 tool_action; - u8 reserved; /* alignment */ + u8 reserved; struct efi_visor_indication efi_visor_ind; u32 sp_reserved; - /* Force signals to begin on 128-byte cache line */ u8 reserved2[28]; - /* guest partition uses this queue to send requests to Control */ struct signal_queue_header request_queue; - /* Control uses this queue to respond to service or guest - * partition requests - */ struct signal_queue_header response_queue; - /* Control uses this queue to send events to guest partition */ struct signal_queue_header event_queue; - /* Service or guest partition uses this queue to ack Control events */ struct signal_queue_header event_ack_queue; - /* Request fixed-size message pool - does not include payload */ - struct controlvm_message request_msg[CONTROLVM_MESSAGE_MAX]; - - /* Response fixed-size message pool - does not include payload */ - struct controlvm_message response_msg[CONTROLVM_MESSAGE_MAX]; - - /* Event fixed-size message pool - does not include payload */ - struct controlvm_message event_msg[CONTROLVM_MESSAGE_MAX]; - - /* Ack fixed-size message pool - does not include payload */ - struct controlvm_message event_ack_msg[CONTROLVM_MESSAGE_MAX]; - - /* Message stored during IOVM creation to be reused after crash */ - struct controlvm_message saved_crash_msg[CONTROLVM_CRASHMSG_MAX]; + struct controlvm_message request_msg[CONTROLVM_MESSAGE_MAX]; + struct controlvm_message response_msg[CONTROLVM_MESSAGE_MAX]; + struct controlvm_message event_msg[CONTROLVM_MESSAGE_MAX]; + struct controlvm_message event_ack_msg[CONTROLVM_MESSAGE_MAX]; + struct controlvm_message saved_crash_msg[CONTROLVM_CRASHMSG_MAX]; } __packed; -/* The following header will be located at the beginning of PayloadVmOffset for +/* + * struct visor_controlvm_parameters_header + * + * The following header will be located at the beginning of PayloadVmOffset for * various ControlVm commands. The receiver of a ControlVm command with a * PayloadVmOffset will dereference this address and then use connection_offset, * initiator_offset, and target_offset to get the location of UTF-8 formatted @@ -457,7 +602,8 @@ struct visor_controlvm_parameters_header { u32 name_length; uuid_le id; u32 revision; - u32 reserved; /* Natural alignment */ + /* Natural alignment */ + u32 reserved; } __packed; /* General Errors------------------------------------------------------[0-99] */ @@ -473,57 +619,50 @@ struct visor_controlvm_parameters_header { #define CONTROLVM_RESP_EXPECTED_CHIPSET_INIT 101 /* Maximum Limit----------------------------------------------------[200-299] */ -#define CONTROLVM_RESP_ERROR_MAX_BUSES 201 /* BUS_CREATE */ -#define CONTROLVM_RESP_ERROR_MAX_DEVICES 202 /* DEVICE_CREATE */ +/* BUS_CREATE */ +#define CONTROLVM_RESP_ERROR_MAX_BUSES 201 +/* DEVICE_CREATE */ +#define CONTROLVM_RESP_ERROR_MAX_DEVICES 202 + /* Payload and Parameter Related------------------------------------[400-499] */ -#define CONTROLVM_RESP_PAYLOAD_INVALID 400 /* SWITCH_ATTACHEXTPORT, - * DEVICE_CONFIGURE - */ -#define CONTROLVM_RESP_INITIATOR_PARAMETER_INVALID 401 /* Multiple */ -#define CONTROLVM_RESP_TARGET_PARAMETER_INVALID 402 /* DEVICE_CONFIGURE */ -#define CONTROLVM_RESP_CLIENT_PARAMETER_INVALID 403 /* DEVICE_CONFIGURE */ -/* Specified[Packet Structure] Value-------------------------------[500-599] */ -#define CONTROLVM_RESP_BUS_INVALID 500 /* SWITCH_ATTACHINTPORT, - * BUS_CONFIGURE, - * DEVICE_CREATE, - * DEVICE_CONFIG - * DEVICE_DESTROY - */ -#define CONTROLVM_RESP_DEVICE_INVALID 501 /* SWITCH_ATTACHINTPORT*/ - /* DEVICE_CREATE, - * DEVICE_CONFIGURE, - * DEVICE_DESTROY - */ -#define CONTROLVM_RESP_CHANNEL_INVALID 502 /* DEVICE_CREATE, - * DEVICE_CONFIGURE - */ -/* Partition Driver Callback Interface----------------------[600-699] */ -#define CONTROLVM_RESP_VIRTPCI_DRIVER_FAILURE 604 /* BUS_CREATE, - * BUS_DESTROY, - * DEVICE_CREATE, - * DEVICE_DESTROY - */ -/* Unable to invoke VIRTPCI callback */ -#define CONTROLVM_RESP_VIRTPCI_DRIVER_CALLBACK_ERROR 605 /* BUS_CREATE, - * BUS_DESTROY, - * DEVICE_CREATE, - * DEVICE_DESTROY - */ -/* VIRTPCI Callback returned error */ +/* SWITCH_ATTACHEXTPORT, DEVICE_CONFIGURE */ +#define CONTROLVM_RESP_PAYLOAD_INVALID 400 +/* Multiple */ +#define CONTROLVM_RESP_INITIATOR_PARAMETER_INVALID 401 +/* DEVICE_CONFIGURE */ +#define CONTROLVM_RESP_TARGET_PARAMETER_INVALID 402 +/* DEVICE_CONFIGURE */ +#define CONTROLVM_RESP_CLIENT_PARAMETER_INVALID 403 + +/* Specified[Packet Structure] Value--------------------------------[500-599] */ +/* SWITCH_ATTACHINTPORT */ +/* BUS_CONFIGURE, DEVICE_CREATE, DEVICE_CONFIG, DEVICE_DESTROY */ +#define CONTROLVM_RESP_BUS_INVALID 500 +/* SWITCH_ATTACHINTPORT*/ +/* DEVICE_CREATE, DEVICE_CONFIGURE, DEVICE_DESTROY */ +#define CONTROLVM_RESP_DEVICE_INVALID 501 +/* DEVICE_CREATE, DEVICE_CONFIGURE */ +#define CONTROLVM_RESP_CHANNEL_INVALID 502 +/* Partition Driver Callback Interface------------------------------[600-699] */ +/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */ +#define CONTROLVM_RESP_VIRTPCI_DRIVER_FAILURE 604 +/* Unable to invoke VIRTPCI callback. VIRTPCI Callback returned error. */ +/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */ +#define CONTROLVM_RESP_VIRTPCI_DRIVER_CALLBACK_ERROR 605 +/* Generic device callback returned error. */ +/* SWITCH_ATTACHEXTPORT, SWITCH_DETACHEXTPORT, DEVICE_CONFIGURE */ #define CONTROLVM_RESP_GENERIC_DRIVER_CALLBACK_ERROR 606 - /* SWITCH_ATTACHEXTPORT, - * SWITCH_DETACHEXTPORT - * DEVICE_CONFIGURE - */ -/* generic device callback returned error */ /* Bus Related------------------------------------------------------[700-799] */ -#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED 700 /* BUS_DESTROY */ +/* BUS_DESTROY */ +#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED 700 + /* Channel Related--------------------------------------------------[800-899] */ -#define CONTROLVM_RESP_CHANNEL_TYPE_UNKNOWN 800 /* GET_CHANNELINFO, - * DEVICE_DESTROY - */ -#define CONTROLVM_RESP_CHANNEL_SIZE_TOO_SMALL 801 /* DEVICE_CREATE */ +/* GET_CHANNELINFO, DEVICE_DESTROY */ +#define CONTROLVM_RESP_CHANNEL_TYPE_UNKNOWN 800 +/* DEVICE_CREATE */ +#define CONTROLVM_RESP_CHANNEL_SIZE_TOO_SMALL 801 + /* Chipset Shutdown Related---------------------------------------[1000-1099] */ #define CONTROLVM_RESP_CHIPSET_SHUTDOWN_FAILED 1000 #define CONTROLVM_RESP_CHIPSET_SHUTDOWN_ALREADY_ACTIVE 1001 @@ -535,4 +674,5 @@ struct visor_controlvm_parameters_header { /* Device Related-------------------------------------------------[1400-1499] */ #define CONTROLVM_RESP_DEVICE_UDEV_TIMEOUT 1400 -#endif /* __CONTROLVMCHANNEL_H__ */ +/* __CONTROLVMCHANNEL_H__ */ +#endif -- 2.7.4