From fc683091eb57692679f629784f42dce453877430 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 26 Nov 2012 17:22:12 +0100 Subject: [PATCH] drm/i915: move intel_update_lvds to intel_lvds->pre_pll_enable A few things needed to change: - HAS_PCH_SPLIT since ilk+ is not yet converted to this. - s/LVDS/intel_lvds->reg/ to prep for ilk conversion - replace the clock.p2 == 7 check with a is_dual_link check - s/adjusted_mode/intel_lvds->fixed_mode v2: Rebase on top of Jani Nikula's panel rework. I'm wondering whether we shouldn't add an attached_panel pointer to intel_encoder, to replace the encoder private ->attached_connector pointers, since that's essentially what we need. Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 59 ------------------------------------ drivers/gpu/drm/i915/intel_lvds.c | 57 ++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 59 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2705da3..bb080fb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4257,51 +4257,6 @@ static void i9xx_update_pll_dividers(struct drm_crtc *crtc, } } -static void intel_update_lvds(struct drm_crtc *crtc, intel_clock_t *clock, - struct drm_display_mode *adjusted_mode) -{ - struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - u32 temp; - - temp = I915_READ(LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (pipe == 1) { - temp |= LVDS_PIPEB_SELECT; - } else { - temp &= ~LVDS_PIPEB_SELECT; - } - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock->p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more thoroughly into how - * panels behave in the two modes. - */ - /* set the dithering flag on LVDS as needed */ - if (INTEL_INFO(dev)->gen >= 4) { - if (dev_priv->lvds_dither) - temp |= LVDS_ENABLE_DITHER; - else - temp &= ~LVDS_ENABLE_DITHER; - } - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - temp |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - temp |= LVDS_VSYNC_POLARITY; - I915_WRITE(LVDS, temp); -} - static void vlv_update_pll(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -4484,13 +4439,6 @@ static void i9xx_update_pll(struct drm_crtc *crtc, if (encoder->pre_pll_enable) encoder->pre_pll_enable(encoder); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - intel_update_lvds(crtc, clock, adjusted_mode); - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) intel_dp_set_m_n(crtc, mode, adjusted_mode); @@ -4566,13 +4514,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc, if (encoder->pre_pll_enable) encoder->pre_pll_enable(encoder); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) - intel_update_lvds(crtc, clock, adjusted_mode); - I915_WRITE(DPLL(pipe), dpll); /* Wait for the clocks to stabilize. */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6b6ed64..c93ec03 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -89,6 +89,62 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder, return true; } +/* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ +static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder) +{ + struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + struct drm_display_mode *fixed_mode = + lvds_encoder->attached_connector->base.panel.fixed_mode; + int pipe = intel_crtc->pipe; + u32 temp; + + /* pch split platforms are not yet converted. */ + if (HAS_PCH_SPLIT(dev)) + return; + + temp = I915_READ(lvds_encoder->reg); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (pipe == 1) { + temp |= LVDS_PIPEB_SELECT; + } else { + temp &= ~LVDS_PIPEB_SELECT; + } + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (lvds_encoder->is_dual_link) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + /* set the dithering flag on LVDS as needed */ + if (INTEL_INFO(dev)->gen >= 4) { + if (dev_priv->lvds_dither) + temp |= LVDS_ENABLE_DITHER; + else + temp &= ~LVDS_ENABLE_DITHER; + } + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC) + temp |= LVDS_HSYNC_POLARITY; + if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC) + temp |= LVDS_VSYNC_POLARITY; + + I915_WRITE(lvds_encoder->reg, temp); +} + /** * Sets the power state for the panel. */ @@ -1041,6 +1097,7 @@ bool intel_lvds_init(struct drm_device *dev) DRM_MODE_ENCODER_LVDS); intel_encoder->enable = intel_enable_lvds; + intel_encoder->pre_pll_enable = intel_pre_pll_enable_lvds; intel_encoder->disable = intel_disable_lvds; intel_encoder->get_hw_state = intel_lvds_get_hw_state; intel_connector->get_hw_state = intel_connector_get_hw_state; -- 2.7.4